Apple mini OS X version 10.6.8 or later.

how do i update my apple mini itunes to OS X version 10.6.8 or later.

You purchase an upgrade DVD to go to 10.6.8 and then to to the Mack App store to get further updates.
You need a Mac with an Intel processor (not G4 Power PC processor) to go to 10.6.8
Some Intel Minis can only to go 10.6.8, some to 10.7 and the other to the current 10.9. For which see:
http://en.wikipedia.org/wiki/Mac_Mini

Similar Messages

Problem description: My MacBook Pro is running really slow. Applications won't open or take up to 10 min. EtreCheck version: 2.1.5 (108) Report generated December 27, 2014 at 9:15:58 PM CST Click the [Support] links for help with non-Apple products

Problem description:
My MacBook Pro is running really slow. Applications won’t open or take up to 10 min.
EtreCheck version: 2.1.5 (108)
Report generated December 27, 2014 at 9:15:58 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 6:55:8
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HD (disk1) / [Startup]: 498.88 GB (5.04 GB free) (Low!)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.epson.driver.EPSONProjectorUDAudio (1.30 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.2.6 - SDK 10.4) [Support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.6 - SDK 10.4) [Support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.6 - SDK 10.5) [Support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.2.6 - SDK 10.4) [Support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[running] com.seagate.TBDecorator.plist [Support]
5 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.carbonite.launchd.carbonitealerts.plist [Support]
[running] com.carbonite.launchd.carbonitestatus.plist [Support]
[loaded] com.coupons.coupond.plist [Support]
[loaded] com.hp.help.tocgenerator.plist [Support]
[loaded] com.trendmicro.itis.dca.plist [Support]
[running] com.trendmicro.itis.uimgmt.agent.plist [Support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Support]
[running] com.carbonite.launchd.carbonitedaemon.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[running] com.trendmicro.icore.av.plist [Support]
[running] com.trendmicro.icore.main.plist [Support]
[running] com.trendmicro.icore.wp.plist [Support]
[running] com.trendmicro.itis.plugin.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[invalid?] com.jdibackup.JustCloud.autostart.plist [Support]
[invalid?] com.jdibackup.JustCloud.backupstart.plist [Support]
[loaded] com.trendmicro.itis.uninstaller.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/Resources/WDDriveUtilityHelper.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/Resources/WDSecurityHelper.app)
USB Display Agent Application (/Applications/USB Display/USB Display.app/Contents/Resources/USB Display Agent.app)
bomgar-scc-20130819-104735 UNKNOWN (missing value)
bomgar-scc-20130905-143949 UNKNOWN (missing value)
HP Scheduler Application (/Library/Application Support/Hewlett-Packard/Software Update/HP Scheduler.app)
HP Product Research Application (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 [Support]
CouponPrinter-FireFox_v2: Version: 5.0.5 - SDK 10.6 [Support]
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.235
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
npBcsMcTcIO: Version: Unknown [Support]
Safari Extensions: ℹ️
Trend Micro Toolbar [Installed]
3rd Party Preference Panes: ℹ️
Carbonite [Support]
Flash Player [Support]
Paragon NTFS for Mac ® OS X [Support]
Seagate Dashboard for Mac OSX [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
HD: Disk size: 498.88 GB Disk used: 493.84 GB
Destinations:
Jens Seagate Backup [Local]
Total size: 999.86 GB
Total number of backups: 6
Oldest backup: 2014-06-24 10:33:56 +0000
Last backup: 2014-12-17 17:14:18 +0000
Size of backup disk: Too small
Backup size 999.86 GB < (Disk used 493.84 GB X 3)
My Passport for Mac [Local]
Total size: 2.00 TB
Total number of backups: 14
Oldest backup: 2013-08-21 19:19:35 +0000
Last backup: 2014-12-19 11:44:23 +0000
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
      6% coreaudiod
      5% CarboniteDaemon
      4% iMovie
      3% JustCloud
      3% Wondershare Player
Top Processes by Memory: ℹ️
335 MB iPhoto Library Manager
180 MB Finder
142 MB iMovie
70 MB Preview
51 MB Microsoft Word
Virtual Memory Information: ℹ️
149 MB Free RAM
1.04 GB Active RAM
897 MB Inactive RAM
1.17 GB Wired RAM
30.53 GB Page-ins
1.42 GB Page-outs
Diagnostics Information: ℹ️
Dec 26, 2014, 05:17:12 PM /Library/Logs/DiagnosticReports/iPhoto_2014-12-26-171712_[redacted].cpu_resourc e.diag [Details]
Dec 26, 2014, 03:47:17 PM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-154717_[redacted].cp u_resource.diag [Details]
Dec 26, 2014, 02:22:01 PM Self test - passed
Dec 26, 2014, 11:48:03 AM /Library/Logs/DiagnosticReports/CarboniteDaemon_2014-12-26-114803_[redacted].cp u_resource.diag [Details]

You have nearly run out of disk space. Either purchase a larger one or start cleaning out the one you have?

27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
6/1/10 9:45 AM 27-inch iMac Display Update 1.0
6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
6/4/10 11:47 AM 27-inch iMac Display Update 1.0
6/5/10 7:29 AM 27-inch iMac Display Update 1.0
I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
Here is the System Profiler Graphics/Displays output:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Display Connector:
Status: No Display Connected
It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
Does anybody have similar experience, or better yet, a fix?

Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
27-inch iMac Display Firmware Update 1.0
http://support.apple.com/kb/DL998
27-inch iMac Graphics Firmware Update 1.0
http://support.apple.com/kb/DL984
Dah•veed

Why Apple Mini-DVI to DVI Adapter couldn't be connected?

i purchased Apple Mini-DVI To DVI adapter but it couldn't be connected to any port of my macbookpro 13" without retina
if you 've solution please advise.

What is the model identifier of your MBP? Also what oSX are you using?
You can find this info by clicking on the Apple in the menu bar About this Mac, in the first window it should should show the OSX Version.
Then click on More info, and the next page (Hardware overview) second line should be Model Identifier: x,x
What are you connecting to and what type of input(s) does it have. If you do not know how to idendify the inputs, post the make, model of the device.

Apple Mini DVI to DVI Adapter - Too short?

I want to connect my iMac 2.8 ghz, 24" screen to an external Philips 190B LCD monitor and use the Extended Desktop function.
The Philips Monitor model is the 190B6CG/00 and it is a single link monitor (Philips tell me it is DVI-D Receptacle Connector 24 pin = single link).
I'm looking at the Apple Mini DVI to DVI adapter here on the Apple Store. It looks like it should plug into my iMac one end then the other end into my Philips. However it looks like it is too short to reach my Philips Monitor. They are not a fantastic distance apart. In fact they are sat side by side - but I somehow can't see the Apple Adapter being long enough (unless it crosses a 3-sphere).
Presumably then, some sort of extension is required between the DVI end of the Apple adapter and the Philips Monitor's DVI input.
Does anyone know what this extension could be and where is may be purchased?
Regards

Hello to everyone who has replied to my cry for help.
Thank you all. I will apply points to everyone who has responded (so quickly too).
Scorpie
I totally agree. I have been thinking along these lines too. However, searching on the internet whilst researching, I found it difficult to decide what I needed because of the 'photos' supplied. They were ok as such but most didn't show very well the pin outs. Further research into the matter (and one website in particular - i.e. Maplin) made me realise that GENDER was involved. Also, with DVI, females look like males in web photos until you find a photo from the right angle. Same goes for VGA I reckon.
I'm certain most people looking at DVI (and VGA) cable/connectors can't tell the difference when the devices are only viewed from 'above' . In my opinion they need to be viewed more or less end-on to show where they have pins or holes. I mean full end-on, not at an angle where (as I found above) detail as to pin or hole is lost in digital or compression noise. This is what I have experienced in all but one of the web sites I have visited. Another thing, most websites have an 'enlarged version' button which, if selected, shows the same photo exactly the same size. No help whatsoever. But then there's no doubt you must already be well aware of this.
MyHighway
You are correct. The Philips did come with a VGA cable. However I want to connect to my iMac digitally (if I can) using DVI (it looks like a 'female' connector on inspection of the back of the Monitor). I have found it almost impossible to tell the difference from most photos on the web even with my new huge screen iMac. One of the reasons I'm am a little nonplussed I think.
mrtotes
Good point. If I take a photo of the back of my Philips and take the Apple connector down to Maplin perhaps I can compare and contrast with real specimens. Yo!!
I think I will give that a go.
You have all been very helpful indeed. Opened my eyes somewhat.
I wish a Merry Christmas to all my new Mac friends

I cant installing iphoto .. it`s says iPhoto can't be installed on Macintosh HD because Mac OS X version 10.7.5 or later is required. and mine is 10.6.8 ... what can i do ?

i cant installing iphoto .. it`s says iPhoto can't be installed on Macintosh HD because Mac OS X version 10.7.5 or later is required. and mine is 10.6.8 ... what can i do ?

You have two possibilities:
1. Keep Snow Leopard and your actual iPhoto.
2. Upgrade OS X.
If you want to upgrade OS X to get the most recent iPhoto, you can upgrade to OS X Lion or Mountain Lion. We are going to choose the most recent, Mountain Lion.
First, check if your Mac is supported > http://www.apple.com/osx/specs If it's supported, make a Time Machine backup and/or a clone with Carbon Copy Cloner, open App Store and purchase Mountain Lion. The installer will download and it will appear when the download finishes, so you have to follow the steps to upgrade OS X. See if your programs are supported > http://www.roaringapps.com
If your Mac isn't compatible, see if you can run OS X Lion > http://support.apple.com/kb/HT4949 If you can run Lion, call Apple to purchase Lion > http://support.apple.com/kb/HE57

While i insalling the latestest update, i have to go for basketball, then i stupidly interruped the udpating by turn off the power key, now my apple mini cant see the login interface, only can see an apple and a loading symbol.does any1 know how could ido

hello every one:
        while i am downloading the latest version of the update, it was fully downloaded, and then it need me to reboot the apple mini to instll the update, so
i did reboot it, then i have to go outside for a basketball game, then, i stupdlly interrupted the installation by turn off the power key.
       and now, i only can see an apple and a loading symbol in a white background. how could i do?
does anyone can help me. thx.
gangspn

Hello Barney:
        thank you for your reply, this helped a lot. but I faced a new problem, when i get into the interface, you mentioned, recovery HK, and i want to reinstall lion, after i get connect to the internet, it saids, i can't download the OS component without install the lion. thats really bothering me.
thank you for your help anyways. do you still know any other solutions?
i tried disk utility function, and repaire all the errors, still can't get into the login interface.
gangspn

I got the ipad mini wi-fi version. Recently I've passed on ios7.02 and now my normal access to wi-fi became a great problem. Is any possibility to resolve this problem?

I got the ipad mini wi-fi version. Recently I've passed on ios7.02 and now my normal access to wi-fi became a great problem. Is any possibility to resolve this problem?

Hello bettyf25
There could be a few things that could cause that issue. One is to make sure that the router settings are set to the recommended settings. The other is to go through the troubleshooting steps lied out in the articles below. This should give you a good starting point to get the issue resolved.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I have an apple mini mac computer. My mouse is dragging and I cannot play my fast computer games. I want to know what I should do. Thanks.

I have an apple mini mac desk top computer. My mouse is dragging and I cannot play my fast games. What should I do? Help please!!

At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Apple Mini DVI to Video Adapter - do you need cables as well?????????????

Apple Mini DVI to Video Adapter
i have this already,but do i need a certain cable to go into the TV. as it only has one port instead of the usual 3 av leads have???
help please,confused...............

Look in your question and you'll find the answer...
Apple mini DVI to Video Adapter
...the usual 3 av (audio/video) leads...
DVI is video only so you only need one port... if you were hooking up audio and video you'd need three (1 for video - 2 for the left/right audio channels)

Apple Mini-DVI to Video Adapter for eMac ?

Hi,
I use an Apple Mini DVI to VGA on my eMac to expand my monitor space, connect to an old Pinceton 15" lcd, both are on 1024 x 768 res in millions colors, and work fine.
My question is I have plan to buy an Apple Mini-DVI to Video Adapter since some of my project require a transfer process to an old vcr or Sony TRV-27 mini dv cam.
Would the adapter compatible for my eMac mini DVI port ? because eMac is not mentioned as apple compatible for this adapter at apple store, yet there is a review said it work great on ones eMac.
Anybody else using this adapter that would share with me ?
Thank you.

look like it is indeed an apple mini vga adapter that I use, and now I need an adapter that allow me to connect to a TV, VCR or Mini-DV camcorder.
will that Apple Mini-DVI to Video adapter compatible to my eMac. Or do they have mini-vga to video adapter on aapple store.
Thank you any information.

Apple Mini-DVI to Video Adapter

I have just purhased a new Macbook. My first mac ever
My question is regardng the Apple Mini-DVI to Video Adapter.
Do I read that correctly that I can hook my macbook up via rca and s-video but not composite? Does Apple make one cable that will do both?
I would like the ability to hook up to a projector which will likely be composite. As well RCA/S-video via t.v or DVD inputs.
Thanks
Tig

For VGA you will need the Mini-DVI to VGA adapter. For composite video you will need the Mini-DVI to video adapter. If you want sound while using the video adapter you will need a 3.5mm to rca stereo cable. This is a y cable like this Example of 3.5mm to RCA Y cable
FYI the RCA output on the video adapter is composite video.

Apple Mini-DVI to Video Adapter Question

I want to hook up my macbook (late 2008 model) to my tv. Will the Apple Mini-DVI to Video Adapter
work? If it will work on my tv then what else do I need to get? It looks like you need other wires to hook up to your tv? Thanks in advance for your help!

The new MacBooks that use the NVIDIA 9400M video chip do _not_ support output to analog TVs. Thus, with the current MacBooks the only way to get output to an analog TV is with a third-party VGA-to-analog TV converter box -- you can't just use one of Apple's cables (although you'll need the mini display port to VGA adapter cable to connect to a third-party VGA-to-TV converter box).
More specifically, you can _not_ use one of Apple's $19, DVI to Video (composite/S-Video) adapters on the new MacBooks.
See also this discussion:
http://discussions.apple.com/thread.jspa?threadID=1927674&tstart=15

Apple Mini-DVI to Video Adapter doesn't fit my aluminum iMac

I previously had a 17" white iMac (pre-Intel) machine, and about 6 months ago I bought the mini-DVI to video adapter so I could connect it to my television. Worked like a charm. But I recently bought a new aluminum iMac, and the adaptor doesn't fit into the mini-DVI port in the back of the machine. It appears the adaptor and port are both male ends.
Has the port changed on the aluminum iMacs? The product description for the adaptor on Apple's website says it works with iMac (Intel Core Duo). Isn't the aluminum iMac an Intel Core Duo? I can't figure out why it doesn't fit and which cable I'm supposed to be using instead.
Any advice would be appreciated!

Hi Paul
Yes the Intel iMac [Spec's|http://support.apple.com/specs/imac/iMacMid2007.html] call for the (M9319G/A) Apple Mini-DVI to Video Adapter!
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 19G/A
The iBook, eMac, or iMac G5 use the Mini-VGA to Video adapter.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=722 C6629&nplm=M9109G%2FA
Dennis

Apple Mini-DVI to Video Adapter Questions

I'm in the processing of producing an instructional video using an Intel Core Duo iMac and iMovie. This content will be distributed primarily via broadcast over cable TV. Considering this, I'd like to be able to edit and view my dv footage on a TV monitor as I work.
I was told by the Apple Store person that the Apple Mini-DVI to Video Adapter (http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6314001/wo/jY18n ncCp3Nx2tYjws52iCaPkH1/1.0.21.1.0.8.25.7.11.2.3) will enable me to
1. Mirror my desktop to simultaneously show me what my iMovie edits will look like on a TV; and
2. Enable me to edit in iMovie using the TV as my desktop.
Am I understanding the capabilities of the Apple Mini-DVI to Video Adapter correctly?
Regarding Cables
1. I currently use an RCA composite cable to view dv footage from my camcorder directly on the TV. Is this the same cable I'd attach to the Mini-DVI to Video Adapter?
2. The DVD recorder/player my TV signal is routed through has an s-video port. Is there a benefit to using an s-video connection in addition to/or instead of the RCA connections?
Thanks for helping me understand this setup scenario!
core duo Mac OS X (10.4.6)
core duo Mac OS X (10.4.6)

Ditto to Karsten's post:
"Mirroring" a Mac's output to a TV, or plugging in an adaptor to provide a display on a Mac's screen and simultaneously on a TV ruins the Mac's display while this is happening by lowering its resolution. Ugghhh! (..I've tried this several times, in order to get a 'TV' signal out, showing the Mac's desktop, but it's hopeless..)
Karsten's method is the best - output to camcorder via the normal FireWire cable, and plug a TV or monitor into the camcorder's A/V Out socket!
[..Note, though, that Matti has pointed out that - what was it..? - during editing, some updating of the TV-thro-camcorder display doesn't work correctly. I can't remember exactly what the problem was, and I don't see it mentioned on Matti's Bugs Page, but there was some slight oddity. Nevertheless, this is still the best way of viewing on a TV or monitor..]

Apple mini OS X version 10.6.8 or later.

Similar Messages

Maybe you are looking for