Apple Mobile Device Support will not install! Any answers re rollback issue?

Hi,
Im running Windows 32bit and trying to install the latest Itunes version 10.5.1.42 after a few attempts i have managed to install all of it apart form Application Modbile Device Support (AMDS), therefore meaning that i can not sync with my new Iphone.
Essentialy when it gets to installing AMDS it rolbacks. It can create the folders ok and but does not copy any drivers into the folders. All the other Apple folders in common files directory are ok and populated and work. I tunes work - just doesnt let me connect my phone as AMDS is empty.
I have noticed a few threads regarding this issue over the years and tried lots of the suggestions:
completely uninstalling Itunes and all traces of associated apple products. Manually removing residual files. Done this lots and lots of times, Itunes etc will install,  AMDS will not
checked various permissions
Ensured Windows updates are all up to date
Removed other mobile phone software
changed msconfig settings
Im just going around in circles now. I cant bear the thought of running thorugh another uninstall of Itunes and ten watching it install again only to see the roll back bar appear and reverse!
Any idea people?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
If that fails try the advice on rolling back to the last build of iTunes that worked for you.
tt2

Similar Messages

  • Apple Mobile Device Support Will NOT Install - Win 8 OS

    I uninstalled EVERYTHING Apple...all folders, all apple software. I went through my computer and everything was removed. I did not go through the registry and remove anything so that may be where the problem is.
    I looked in programs and features and there is no "Apple Mobile Device Support" installed.
    It's as if it will not install, no matter what I do.
    I think it may be a registry issue in Win 8 but not sure.
    I have looked all over for a solution but to no avail. I uninstalled everything, reinstalled iTunes, I even tried to installed the .exe specifically for Apple Mobile Device Support and it rolled back, refusing to install it.  I have tried updating drivers. My iPhone does show up in Task manager as well.
    Under device manager, my iPhone
    I follwed this >link< and did exactly what it said to do but still didn't work.
    I have a feeling there is no solution to this one. Any other suggestions?   Is there a way to remove more apple software including in the registry?
    I appreciate any feedback.  If anybody else has had this issue and have a proven method to resolve it, PLEASE share. 
    Thanks again!

    I have the same problem with Win7. Did uninstall so many times now I can do it in my sleep. I did one thing which seemed to work for a while. After I uninstalled itunes 11, I reinstalled the earlier version. That brought back the Apple Mobile Device Support feature. Then I updated itunes to the latest version. Then I get the same message about amds not the latest version and uninstall itunes etc...(evern though when I check amds IS the latest version). It's a merry go round. Can't sync my iphone 4s or iPad 3. I finally got rid of itunes 11.1.1. Guess I just have to sit back and wait for a while until the new version comes out or until someone figures out a solution.

  • HT1923 I cannot install the latest version of itunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall.  This has left me with no itunes .  Help please

    I cannot install the latest version of iTunes as it instructed me to uninstall the version I had, which I did, but the "Apple mobile device support" will not uninstall.  This has left me with no iTunes and the new version will not install until I can uninstall all the old components.  Help please

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunesSetup.exe installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    tt2

  • "Apple Mobile Device Support" will NOT uninstall from my computer, so I am still unable to upload iTunes

    "Apple Mobile Device Support" will NOT uninstall from my computer so I am still unable to upload iTunes.  I have tried it multiple times in multiple ways and after the uninstall always fails.  Solutions to this specific problem?

    I don't know... A link to the official repair advice is given at the top of my user tip. There was a new build of the iTunes 11.1.4.62 setup file released yesterday which is supposed to install cleanly on any system still back on iTunes 11.1.3.8, however they are still giving the same advice for problem systems that have already been upgraded. I.e. the new installer won't repair a currently borked install.
    You can download 7-Zip (free), or a free trial of WinRAR, and unpack the iTunesSetup.exe or iTunesSetup64.exe file into its components, then try installing them individually in alphabetical order (don't try to install SetupAdmin.exe or iCloud.msi). AMDS might not install right now, but you may get a more useful error message as to why not, and you might be able to run iTunes even if you can't update your devices at this stage.
    tt2

  • HT1923 apple mobile device support will not uninstall

    I'm trying to remove and reinstall itunes, the program "apple mobile device support" will not uninstall.

    You could try downloading and installing 7-Zip (free) and downloading a fresh copy of the iTunesSetup.exe installer, unpack the installer into its components using 7-Zip then try installing AppleApplicationSupport again. It may still fail to install but you may get more useful error messages as to why not.
    tt2

  • HT1923 Apple Mobile Device Support will not uninstal.  Any advice on how to deal with this?

    Apple Mobile device will not uninstall.  Other components uninstal ok.  Cannot uninstal and reinstall iTubes.  Any advice?

    Hey AJKP,
    Thanks for the question. I understand that you are experiencing issues uninstalling Apple Mobile Device Support. The following article provides a solution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • ITunes 8.2 Apple Mobile Device Support does not install

    I am unable to complete the full 8.2 install on my machine - the AMDS component fails to install, although the rest of the packages go in successfully. Unfortunately, without AMDS, I can't sync' my iPhone 3G, nor my iPod.
    Having broken out the AMDS package from the 8.2 installer .exe, and tried to run it separately from the command line with logging enabled, the error appears to occur while trying to install the USB drivers themselves - the relevant lines are inserted here:
    DIFXAPP: INFO: ENTER: DriverPackageInstallW
    DIFXAPP: INFO: Installing INF file 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl64.inf' (Plug and Play).
    DIFXAPP: INFO: Could not open file C:\Windows\System32\DriverStore\FileRepository\usbaapl64.infamd64_neutralb6bcda7a7950fa43\usbaapl64.inf. (Error code 0xE0000003: The syntax of the INF is invalid.)
    DIFXAPP: ERROR: PnP Install failed. (Error code 0x3EE: The volume for a file has been externally altered so that the opened file is no longer valid.)
    DIFXAPP: INFO: Attempting to rollback ...
    DIFXAPP: INFO: No devices to rollback
    DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x3EE)
    DIFXAPP: ERROR: encountered while installing driver package 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl64.inf'
    DIFXAPP: ERROR: InstallDriverPackages failed with error 0x3EE
    DIFXAPP: RETURN: InstallDriverPackages() 1006 (0x3EE)
    CustomAction MsiInstallDrivers returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    Action ended 21:16:25: InstallFinalize. Return value 3.
    Action 21:16:25: Rollback. Rolling back action:
    Rollback: MsiInstallDrivers
    Rollback: MsiRollbackInstall
    I'm unable to break open the .msi fully because it is apparently 'corrupt', although that doesn't seem to stop Windows having a go. That said, the little that I can peer into it, the relevant .INF file mentioned in the log appears to be zero length.
    Backing out the full install and downgrading to 8.1.1 seems to work fine, except that now MobileMe won't work because it's keyed to iTunes 8.2!!
    Has anyone else seen this problem? Has anyone else got a valid AMDS .msi file I can try?!
    Thanks,
    ANdy

    Maybe a little bit of forum necromancy going on here, but I thought it was worth posting for W7 RC users. aclc's post got me thinking about this tonight when I had issues updating my iTunes, and after some hard work investigating the issue, I figured out what has to happen. Basically aclc is exactly right with the root of the issue - I'm simply expanding the idea to involve instructions for those who can't afford to or won't be bothered with finding out the details of the solution.
    Please note that these instructions were written assuming you are using an administrator-level account on a 64-bit Windows 7 Release Client installation, but should help 32-bit users if they have the same experience - I have not tried this solution on a 32-bit box. This fix has been administered using iTunes 9, so I have personally verified this will work with that version of iTunes.
    iTunes 9 issue: iTunes requesting that you uninstall and reinstall for Apple Mobile Support after trying to install iTunes 9 on Windows 7 RC x64
    Resolution:
    By now you've already gone through the failed install on Apple Software Update, and may or may not have manually downloaded iTunes...I'm going to start from the beginning for the benefit of anyone who doesn't want to waste the hour and a half that I did to figure this one out (actually i detoured to read up on a few things for most of that time to feed my inner nerd, but I digress). Plus, this should help with retail Windows 7 users (provided Apple and MS haven't worked this out amongst themselves).
    1 - TURN OFF UAC
    a) Hit Windows Key + R to open the Run command box, type "msconfig", and hit enter or click OK.
    b) Go to the Tools tab, highlight Change UAC Settings and click the Launch button.
    c) Move the slider all the way down to the bottom to turn off UAC.
    d) Reboot your PC for the changes to UAC to take effect.
    2 - INSTALL iTUNES AND APPLE MOBILE SUPPORT THE RIGHT WAY (A.K.A. NOT LIKE THE INSTALLER TRIES TO)
    a) In Apple Software Update, go to Tools | Open Downloaded Updates Folder... (if already downloaded and the installation has failed)
    -or-
    Use the Download and Install Manually feature of the Tools menu (if you have not already tried to install via Apple Software Update)
    b) Locate the iTunes installer and the Apple Mobile Software Update installer. For me they were called:
    iTunes64.msi
    AppleMobileDeviceSupport64.msi
    c) Right-click one of the files identified in 2a. Select Properties, and go to the Compatibility tab. Check the "Run this program in compatibility mode for:" box and select "Previous Versions of Windows". Click Apply. Repeat for the other file in Step 2a.
    d) Run the Apple Mobile Device Support installer identified in 2a. With UAC and compatibility mode both turned off, you should have a clean install.
    e) IF YOU HAVE ALREADY INSTALLED iTUNES AND GOTTEN THE MESSAGE THAT YOUR MOBILE DEVICE SUPPORT IS NOT COMPATIBLE, DON'T PANIC - HERE'S THE FIX: Right-click the iTunes installer identified in 2a and select Repair. You should see a progress bar but will not have to go through a full install. Voila! Open iTunes, plug in your iPhone, and you should be good to go.
    IF YOU HAVE NOT YET ATTEMPTED TO INSTALL iTUNES, simply run the installer for iTunes identified in 2a.
    There you have it - this should do it for you and save someone the aggravation of figuring this out on their own.
    Don't forget to turn UAC back on if you need/want it on.
    Hope this helps!!
    ~NB
    PnT forever.
    Message was edited by: Nightborne

  • Apple mobile device support was not installed on your computer, help please!

    I bought iphone 6+ yesterday but when I connect it to the computer, itunes did not find it and there has no charging sign.
    When I connect my iphone 4s to the computer, itunes detect it and the charging sign was there.
    I thought it must be itunes' problem so I uninstall itunes and when I want to reinstall itunes, the problem came.
    It start to rolling back action after copying new files.
    Then I tried to uninstall appleapplicationsupport, bonjour, applemobiledevicesupport.
    When I start to reinstall apple mobile device support, it encountered errors and start to rolling back.
    Please help me!

    Follow the instructions here for correctly removing and reinstalling iTunes: Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    If you don't have any of these operating systems there's a link on the page for XP.
    If you have a Mac just drag the iTunes app from the Applications folder to trash, empty trash, then download and install a clean copy from http://apple.com/itunes.

  • Had error 7 windows error 126 and missing MSVCR80.dill. Went through the steps to uninstall and apple mobile device support will not delete. Now I can't download itunes. Help!!

    Had error 7 windows error 126 and missing MSVCR80.dill. Went through the steps to uninstall and apple mobile device would not uninstall. Now I can"t download itunes. Help!!

    apple mobile device would not uninstall.
    Try using the fixit from the following Microsoft document to remove Apple Mobile Device Support:
    Fix problems with programs that can't be installed or uninstalled

  • Trying to uninstall itunes but apple mobile device support will not uninstall

    while uninstalling itunes, the apple mobile device support component will not uninstall   help

    HI Bill
    ReInstall iTunes (dont worry about de device)
    Then copy  QTMovieWin.dll   from C:\Program Files (x86)\Common files\Apple\Apple Application Support
    Then paste file there  C:\Program Files (x86)\iTunes
    Give me your feedback - I am sure it will work
    Claudine

  • Can't sync iPhone... Apple Mobile Device support does not install

    Hello @all,
    I've got a big problem.
    I've installed the 8.1 Update of Itunes and Apple Mobile Device Service would not be installed. After registering modules the setup reverses all actions.
    Now I can start Itunes but my IPhone can't sync. Theres a German Message like: "This IPhone can not be used because it needs software wich is not installed. Please start the ITunes Setup to uninstall Itunes and reinstall the ITunes 64-Bit Version."
    I've uninstalled all Apple components on the PC, cleaned up the registry... but it doesn't work. An older version of Itunes doesn't work too. What can I do? Please help me.
    My system is Windows Vista Ultimate 64-Bit

    You either are not installing it from an Administrator account or you have Vista configured to prevent installation of privileged services. AppleMobileDeviceService must run in a privileged mode.

  • Apple Mobile Device Support is not installed as a Window Service

    How can I install the Apple Mobile Device Service as a Windows Service? I have an external hard drive where I was able to extract the Windows Installer Package from C:\ProgramFiles\CommonFiles\Apple, but I don't now what to do with it, or if it would even be helpful. iTunes still does not recognize the iPhone.

    http://support.apple.com/en-us/HT203188

  • HT1174 I'm not able to install apple mobile device support on my PC. Each time rollback of instalation

    I'm not able to install apple mobile device support on my PC. Each time rollback of instalation

    I am having the same problem and have tried everything I can find to get the problem corrected:
    Uninstall/install
    delected directories manually
    device manager driver update
    copying working directories from another machine
    cleaned and optimized registry
    Tried to install older version of AMDS
    Tried older version of itunes - would not install because library incompatible
    Appears this is a problem that has been around for years, why is it not isolated and corrected?
    Does anyone have another solution I can try?
    Thanks

  • Trying to Remove iTunes software components because of 11.1.4 update error and using Windows 7 uninstall Apple Mobile Device Support does not work. Any suggestions?

    Had error while updating Itunes to ver 11.1.4.  I had 11.1.3.8 previously. Following instructions for Removing and Reinstalluing iTunes and other software components. Was able to uninstall iTunes and Apple Software Update, but attempts to do the same under Control Panel failed for Apple Mobile Device Support (ver 7.0.0.117). Directioons say to uninstall components in order given so I cannot continue until Apple Mobile Device Support is removed. Any suggestions?

    Try reparing and then remove again if the repair is successful, otherwise move on to the next step. See  Troubleshooting issues with iTunes for Windows updates for more information.
    tt2

  • Apple Mobile Device Support won't install, keeps rolling back..

    I'm using Windows 7 64bit and i have everything updated. Since I've upgraded my iTunes to version 10.1, I can't sync my iPod Touch with it anymore.
    Each time I plug my iPod in,
    - the iPod could be detected by windows but not iTunes, and I keep getting the same error message " "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64bit version of iTunes""
    - my iPod shows up as "Apple Mobile Device USB Driver" in devices and printers
    After searching through the internet, I've tried many fixes but none of them worked. I've tried,
    - downloading the latest iTunes and uninstalling it and reinstalling it again and again
    - uninstalling step by step and completely removed everything as guided by this website (http://support.apple.com/kb/HT1923)
    - extracting the AMDS MSI file from the iTunes64setup and run it separately
    - copying the registry files and the whole Apple Mobile Device Support folder from a Vista machine as recommended in some websites
    - creating a new user account with admin rights and reinstalling iTunes again after completely removing everything
    I've read a post (http://discussions.info.apple.com/thread.jspa?threadID=2531860) in which the user encounters a similar problem as well, and apparently the user solved this problem by replacing the files in C:\Windows\System32\DriverStore\FileRepository\netaapl64.infamd64_neutral26aa9fb28983e9b5
    C:\Windows\System32\DriverStore\FileRepository\usbaapl64.infamd64_neutral36363f69e6e22c1b
    with files he had extracted from the CAB files within the AMDS MSI installer from the iTunes64Setup download.
    But the problem is, whenever I try to extract the netaap164 and usbaap164 files from the AMDS MSI installer, using WinRAR, it says that the archive is corrupted and thus I won't be able to extract these files out.
    Can anyone give me any suggestions or teach me what to do? I'm really stucked and lost now. Thanks in advance. =)

    After a couple days searching the internet for a solution I pieced togetherwhat my problem was from several forums and fixed it; maybe my solution/problemis similar to all of yours. (NOTE: I’m running Windows XP Professional, 32-bit,with Service Pack 3 – so you’ll have to translate my issue into your Windows 7format because I have no idea how to operate things is that version of Windows.)
    I traced the error to the Apple Mobile Device USB Driver under"Universal Serial Bus Controllers" as others have too (everything inthe iTunes installation would install perfectly well except for Apple MobileDevice Support). However, my problem wasn't with the driver itself -- I had amissing .dll file on my computer for the Hardware Update Wizard (whenever Iwould 'right click’ any USB driver and select "Update", HardwareUpdate Wizard would not open; nothing would happen).
    So, I went searching for this problem next, and I found this website: http://kf.livejournal.com/208963.html?view=2699587#t2699587
    The page suggests that the problem is a missing .dll file called “newdev.dll”that should be located in “C:\WINDOWS\system32\” (again, I don’t know theequivalent folder for Windows 7, so someone else will need to find out where “newdev.dll”belongs) – I did a search of the .dll file on my computer and found it missing.However, I found another copy of it on my computer using “Seach Everything” (foundhere: http://download.cnet.com/Everything/3000-2379_4-10890746.html)– but, you can also use the Windows Search tool. There were copies located in “C:\Windows\system32\dllcache”and “C:\Windows\ServicePackFiles\i386”. (I would suggest searching for itrather than locating it manually in Explorer in case its in a hidden folder.)
    I copied one of the preexisting files of “newdev.dll” and pasted it into “C:\WINDOWS\system32\”.Then I tried re-installing Apple Mobile Device Support and it worked (norolling back installation). When I plugged my iPhone back into my USB “AppleMobile Device USB Driver” reappeared under “Universal Serial Bus controllers”in “Computer Management” – all I had to do was “Enable” it again and I hadaccess to my iPhone in iTunes again.
    Also, I had copied a preexisting file of AppleMobileDeviceSupport.msi to mydesktop prior to uninstalling everything, so when I tried to reinstall iTunesand Apple Mobile Device Support failed to install all I had to do later when Ifound the solution was reinstall AMDS. If you do not have a copy of “AppleMobileDeviceSupport.msi”try completely uninstalling everything (like so many other forums suggest, asdoes Apple, here: http://support.apple.com/kb/HT1925),and reinstall iTunes with the Hardware Update Wizard .dll file replaced. (I can’tsay if this entire reinstallation will work since I only had to install AMDS.)
    Hope my problem was your problem as well.

Maybe you are looking for

  • Unable to deploy EJB 3.0 on JBoss 4.0.4GA - no home interface

    I am stuck in that my EJB3.0 project (one entity bean, one session bean and one client test bean) builds OK but somehow Eclipse Europa is unable to deploy it to JBoss (4.0.4 GA and 5 Beta) -- something to do with JNDI error as it involves javax.namin

  • Project code scenario

    Hello Experts, I create B1 to B1 synch Project code scenario (object id 63), The process runs immediately to the DB queue monitor and stays there, It's not running in to failure and I can't understand what seems to be the problem. Best regards Nir

  • Layer Via Copy vs Duplicate Layer

    In CS4, what is the practical difference between: Layer via Copy (Layer > New > Layer via Copy - or Ctrl/J) and Duplicate layer (Layer > Duplicate Layer). Asked another way: when are they NOT interchangeable.

  • Oracle apex 4.0.2 preview images

    Is it possible ti preview the image before upload it into the blob field in my table? How? My application works fine y browse the image put the neame save it and now it is upload into my table but id like to show a preview of that image before upload

  • Pacman on Windows

    I was a bit inspired by this thread, so I wanted to see if it was possible to compile pacman on a windows system. I did use cygwin so I guess I was cheating a bit... Anyway, it was possible with the exception for libdownload, I haven't looked into ho