Apple Multiple Scan 1705 - usable with modern video cards?

Question

I still have an old Apple Multiple Scan 1705 display which I've been using continuously since ~1995. Even though I don't have a Mac anymore (I know, I know, mea culpa), I hooked it up to my PC and it has worked great. But, I recently received a newer hand-me-down PC from my sibling. It didn't come with a monitor, but I thought that would be OK as I could just switch the monitor from my old system to the new system.
As it turns out, it's not that easy. When I boot it up, the monitor goes blank after POST, usually between the XP screen and the welcome screen. Sometimes I can actually get as far as seeing the desktop, but the screen usually goes blank before I can navigate anywhere. It works fine in safe mode, though. From what I've read on the Web, this would appear to be an "infinite loop" problem, where the OS and the video card stop speaking to each other.
I may be on a fool's errand here, trying to combine a PC video card (an NVIDIA GeForce 7600 GS) with an Apple monitor which is ten years older than it. I've done some basic troubleshooting, such as reinstalling the video card drivers and visually inspecting the hardware and connections. But I wonder if it is even possible for the two to communicate properly. For the record, I'm running Windows XP SP3. Has anyone else been foolish enough to try this?
My girlfriend hates the bulkiness of this old CRT monitor and wants to get a flat panel anyway, but while I save up for that, it would be nice to be able to use the new computer with the old monitor. Even if it won't work, I've gotten 13 years of use out of the monitor, so I certainly got my money's worth. But I thought I'd check with the community and see if there's any life left in the old display.
Thanks for your help!

Answer 1

In Windows XP, in order to change the resolution for the monitor, you have to right-click on the desktop and select "Properties". This bring up "Display Properties". From there, you click the "Settings" tab. This gives you some basic options. For a wider selection of resolutions and refresh rates, click on the "Advanced" button. Then select the "Adapter" tab and press the "List All Modes" button. This lists all the available configurations for resolution, refresh rate, and colors. I fiddled around with these, trying all of the configurations that were supposed to work according to the Apple Multiple Scan 1705 specs. Unfortunately, anything other than VGA 640x480 60Hz would cause a "blue screen of death".
My girlfriend had indicated that she wanted to get a flat panel display anyway (to get back some of that desk real estate), so I decided to cut my losses and buy a new monitor. Unfortunately, I now have the exact same problem with the new monitor. So, it seems the problem is not with the monitor after all. Or, at the least, that's not the only problem. Once I resolve what other hardware/software issue is going on, I'll see if the 1705 display will work. But for practical purposes, you can consider this question resolved.
Thanks for entertaining my obscure question.