Apple October 2014 Special Event will not play on my iPhone 6j

iOS 8.0.2 uptodate
Cleared Safari history
closed all apps
restarted Safari
restarted iPhone
refuses to load or play the Apple Special Event October 2014 from the Apple Web Page
http://www.apple.com/live/2014-sept-event/
crazy.

Anyone?
this is the most bizarre thing I've ever seen - the web page loads with nothing where the video belongs.
my coworkers iphone 5 loads it fine
ATomic Web browser loads the page with a "needs QuickTime" picture where the video belongs

Similar Messages

  • I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    I have just upgraded to the latest version of OSX as invited by Apple. Since then iTunes will not play and my volume controls have stopped working - in Preferences the sound controller is not able to find any input or output devices. What is going on?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click  Log in.
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. 
    There will be no audio output in safe mode. The question to be answered by the test is whether any devices are listed in the Sound preference pane. After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • My music will not play on my iPhone 5. It has the upgrade as well as my iTunes on my macbook. But the music will not sync to my iPhone and all music is in my library. What do I need to do?

    My music will not play on my iPhone 5. It has the upgrade as well as my iTunes on my macbook. But the music will not sync to my iPhone and all music is in my library. What do I need to do?

    An exclamation mark means that it doesn't know where you moved the music to.  To fix this, click on the exclamation point and when it asks you to browse to the location where you moved it to, use the normal commands to go up and down folders in your external drive until you find the song.  Repeat as necessary.

  • I downloaded an album from iTunes store and it will not play on my iPhone

    Hi All,
    I downloaded an album from the iTunes store. It will not play on my iPhone 5. How do I contact the iTunes store to get this problem corrected?

    Delete it and redownload from here:
    Open iTunes Store app > More > Purchased > Music

  • My music will not play on an iphone 4

    My music will not play on my iphone 4. It has the play symbol at the top right corner of my iphone but it is not showing the time elasped of the song and you can not hear anything. The volume is turned up and it is not on vibrate. the ringer works and the speaker and microphone works fine. any ideas why my music will not play?? Thanks for any help!

    If you plug in headphones can you hear the music?
    Try cleaning the dock connector and the headphone jack, does this make a difference?

  • IHome iA91 will not play music from iPhone 4

    Hey everybody,
    I'm having an issue that seems to be fairly common, but lacks a solid solution.
    Whenever I dock my iPhone 4, the iHome iA91 will not play music.  My iPhone continues to play music through its own speakers, but will not use the iHome's speakers.  A message also pops up on my phone saying, "This Accessory is Not Supported by iPhone," even though the iHome iA91 lists the iPhone 4 as compatible.  On top of that, it worked when I first got the iHome and now it suddenly will not play my phone.  The volume bar on the iPhone also randomly disappears and returns while it's docked.
    I have tried resetting my phone (home+power), I have restored my phone to stock, I have power cycled the iHome, all to no avail.  The iHome speakers will still play the radio and alarms work as usual, and my phone charges without issues.
    I'm getting quite frustrated and am desperately seeking an answer.  Thanks in advance to everyone who reads or replies.

    Hi Adam,
    Try the steps mentioned below to resolve the issue:
    1. Disconnect iPhone from Docking System, restart both the System and the iPhone and then reconnect iPhone to the System.
    2. If this didn't helps, try resetting both the units. You can reset the Docking System by pressing RESET at base using pin pointed object like paper clip.
    3. Also, try updating iPhone and to latest version and check if that helps.
    NOTE: If iPhone has the case or cover, the device may not be set correctly. Remove the case or cover from the iPhone and set the device again.
    If my post answers your question, please mark it as "Accepted Solution".
    Thank you for your post.

  • Why will some M4A songs will not play on my iPhone 4s?  They play just fine in iTunes and on my iPod Nano.

    I bought my first iPhone on Saturday. After syncing all of my iTunes music to my brand new iPhone 4s, I soon realised that a great deal of m4a files would just not play. If I did attempt to play one of these tracks, it would just skip to the next one.
    What really perplexes me is that all of my iTunes music plays without a problem in iTunes.  On top of this, ALL of my music plays on my iPod Nano.  Why is this just happening on my iPhone 4s? 
    Is this something to do with iOS 5?  Will an update fix it? 
    Please can someone help!?!?

    An exclamation mark means that it doesn't know where you moved the music to.  To fix this, click on the exclamation point and when it asks you to browse to the location where you moved it to, use the normal commands to go up and down folders in your external drive until you find the song.  Repeat as necessary.

  • Video of Some Events Will Not Play in Window at Top Right

    Some of my events that show on the bottom half of the screen do not appear at all in the top right video block when they are playing, no matter whether I try to play them from the bottom half or if I first stick them into a project. Other events from the same camcorder work just fine.
    Any thoughts would be much appreciated.

    Some thoughts in random order
    1. Do you see a yellow triangle by the event name?
    2. Have you tried rebooting your Mac?
    3. Have you moved any events in the Finder?
    4. Do the event names have any odd characters like : or /?
    5. What kind of clips are these? What kind of camcorder?
    6. Has iMovie asked you to optimize clips?

  • Recent iTunes purchases will not play on my iPhone after recent update.  Grey cloud and red arrow syndrome.  Please help?

    Hello,
    I need a bit of help.  I have made a handful of itunes purchases over the past few months.  Yesterday, I updated both my itunes and iphone with the latest updates.  Now, after the update on my iphone I can not get my recent song purchases to play (they played before I updated my phone).  There is a greay cloud with the downward pointing red arrow.  When I click the cloud/arrow nothing happens and it won't download.  I've tried a handful of things that I have found on these forums to no avail.  I've reset software, checked/unchecked this box on my phone and on itunes on my computer, removed and re-installed.  I know this is all a litle vague on what I have done, but please know I've tried and tried all kinds of advice.  Now, I have tpo reach out to the community and see if there is soomehting else that may work.
    Thanks,
    BG

    Hey bgojdics!
    You may want to try downloading these purchases to your phone using the past purchases list:
    Download past purchases
    http://support.apple.com/kb/ht2519
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • HT201272 All my previously purchased iTunes Music will not play on my iPhone 5. I am really frustrated! If anyone knows how to help, please do so :)

    I cannot play any of my previously purchased iTunes songs/albums on my iPhone 5. The songs are listed as downloaded, but when I go to play them, the 'play' screen appears for about 2 seconds, and then disappears. I have followed all the steps I can find online. My phone is syncing with iCloud these days. Please help if you can! 

    Welcome to the forums.
    This hasn't yet been reported but the fact that it's only songs you purchased that plays is suspicious. What is the format of the other music? (Go into iTunes and select one and press Ctrl-I and report on what it says there).

  • HT5630 I am attempting to watch a DVD on my macbook air with the apple super drive but the dvd will not play.

    I am trying to watch a DVD on my Macbook Air using the Apple super drive but it will not play.  I can view CDs but not watch movies.  Can someone give me instructions on how to watch a DVD?

  • Some of the videos on utube will not play correctly?

    The music videos are mostly ok it is usely the how to videos.

    if the youtube video is encoded in a different format then
    Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    http://www.apple.com/ipad/specs/
    it will not play on any ios device

  • Some voicemail messages will not play - any ideas how to solve this?

    Some voicemail messages will not play on my iphone 4S - any ideas how to solve this?

    People have posted a number of issues recently with HP printers and the TC.
    Do the normal stuff.
    1. Wireless name in the TC by default is not SMB compatible.. make it short no spaces pure alphanumeric.
    2. Lock the channel.. the TC on auto can go crazy.. fix it to 1, 6, or 11 in turn.
    3. Test without security.. if it will not join without security.. you can be pretty sure it never will join with.
    4. If you get nowhere.. highly probable.. lock the wireless mode to a/n - b/g
    This is reducing 2.4ghz to G compatibility. Much more likely to work than N.
    If after all this you have started having ticks in your cheeks and approaching nevous breakdown levels.. give up.. the TC is not 100% compatible with the windows world.. and ALL HP belong to the windows world.
    The solution is simple.. a cheap wireless router.. not apple.. your average garden day, netgear, dlink, even a belkin.. although that is the bottom of the barrel.. in wan bypass. ie fix the IP to same range as the TC.. turn off dhpc.. and plug LAN TC to LAN wireless router. Setup the wireless on this.. fixed channel.. G wireless will be fine.. suitable network name and security.. The HP printer will then be available to the network.. and you didn't even have to slit your wrists.

  • Certain songs will not play on iPhone and also not in my iTunes library

    My problem is that songs will not play on my iPhone that I have purchased and appear like this...
    These songs also do not appear in my iTunes library and when I look at the album (or other songs with this problem) in the iTunes Store it appeaers like this...
    As you can see it says "purchased" where it would usually say "play"
    It'd be great if someone could help as I am completely baffled.
    Thanks.

    In settings on your phone:   iTunes and App store - is "show all music" off?   Is automatic downloads off?
    Do you share the computer with other Apple users?   Is it currently associated with another Apple ID?
    The work around is open iTunes purchases on your phone and download directly to your phone that way.

  • Some iTunes purchased songs will not play on iPhone.

    Some of my songs that I have purchased from iTunes will not play on my iPhone but will play on my MacBook Pro and iPad - what can I do to fix this.  This problem has been happening for around a week now.  At first it was 1-2 songs but now in a playlist of around 80 songs approximately 1/4 of the songs will not play.  When the song comes up next in the playlist it will not only skip that song but will also skip past 1-2 other songs.

    Hey brewmaster1967,
    Does this happen with any other purchased content? Download some of the free on iTunes store songs.
    Deauthorize the computer and play/authorize the song in iTunes again.
    http://docs.info.apple.com/article.html?artnum=93014
    Try re-creating the iTunes Library.
    http://docs.info.apple.com/article.html?artnum=93313
    Jason

Maybe you are looking for

  • Fields missing if no value

    Hi, can anyone help me?   I use abap proxy to tranfer a table back, but if any field in the table has no value, the field is missing in sxi_monitor. thanks.

  • How do I change the default language for the spell checker? - solved, sort of...

    As the previous thread was closed without actual resolution - https://support.mozilla.org/en-US/questions/941350?esab=a&s=&r=0&as=s I managed to solve this on my end by just reinstalling firefox using the localisation of the default dictionary langua

  • Formatting mySQL date in a dynamic field

    Hi all.. I've seen many articles on here about how to INSERT dates to the mySQL table, but I need to know how to format it into MM/DD/YYYY when the form dynamically populates from an existing record.  Just using a regular DW8 Recordset behavior for t

  • Using iPod with Vista

    My brother's Mac has died and he was forced to buy a PC for the short term. He is working in Europe for 2 years and there is not a lot of support for Mac over there. He has installed iTunes onto the PC and want to connect their iPods to recharge. The

  • How can i find area under a closed curve

    I am having set of Y-values w.r.t X-values.When i am using numerical integration.vi to measure area, it is showing wrong answer.Is there any other vi to find the area under a closed curve.