"Apple page not found" error after installing iOS 6 and trying to connect to wifi on iPad 2, how do I fix this?

SO I just installed the new iOS6, and the wifi is working (posting on my iPad 2 right now). However it won't let me use safari, and every time I select my wifi network, it shows the full strength signal. But before I can do anything it loads a page in an attempt to connect to apple.com, that says "apple page not found." I can then navigate the apple website, but there is no address bar. I try using safari and it says I am not connected to a wireless network. I know this is a problem with iOS 6, so has anyone heard how to fix this? Or is anyone having this problem as well?

Reading some older threads from 2012 and 2011 it appears the problem was present even then.  Part of the problem was due to people using multiple or different account id's on the various devices.  In my case, I only have one ID and it is the same on all devices yet the iPhone and iPad are still throwing the same error when I try turning on iTunes Match.  This is very frustrating . . . any help out there?  Thanks.

Similar Messages

  • After installing iOS 7.1.1 my apps fail to update.  How do I fix this?

    Every time I try to update an app it fails.  This has occurred since I updated to iOS 7.1.1.  How do I get my apps to download and update?

    Settings>iTunes and App store>AUTOMATIC DOWNLOADS>Updates>On

  • "Page not found" error after 5 minutes of see "processing" on the screen

    We are using WebLogic 8.1 server and also the WebLogic proxy as our front end. When a user runs a process that takes over 5 minutes using the Proxy URL they receive an IE "Page not found" error after 5 minutes of seeing "processing" on the screen. If they run it on none Proxy URL (directly on WebLogic server) it works fine.
    We have looked into the WLIOTimeoutSecs parameter and set in the web.xml for both the HttpClusterServlet and HttpProxyServlet, but this had no affect.
    Is there another timeout that controls this 5 minute timeout? It seems if one uses Apache and sets the WLIOTimeoutSecs parameter to a higher number than 300 seconds there is not an issue.
    Did this parameter get omitted for the WebLogic Proxy and if so, what does one use?
    Thanks,
    Jim

    Hello George,
    Thank you for the quick reply. I will surely try the option suggested by you.
    But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
    Maybe I should be looking at:
    SESSION-TIMEOUT due to kernel:
        Kernel parameter:    rdisp/gui_auto_logout
        Kernel parameter:    rdisp/plugin_auto_logout
    as per the SAP OSS Note: 705013
    But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
    Thanks,
    Gaurav
    Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
    Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

  • "The vendor account you entered is not associated with the item you are trying to open.  Please try again".  How do I fix this?

    Digital editions is set-up and accepting books.  Everything seems fine except when I try to open the books, it asks for authorisation.  I enter the Adobe ID which works when I go into the Adobe site, but gives me the error "The vendor account you entered is not associated with the item you are trying to open.  Please try again".  How do I fix this?

    This is the Adobe Reader forum; please ask in the Digital Editions forum.

  • 404 page not found error after upgrade to 4.0 from 3.x

    We developed this application in 1.6 and a couple years ago upgraded to 3.2. We've just upgraded the Production version to 4.0.0 (that's what was on the Dev box). I understand that the template we used when developing it is now obsolete and I added some stuff to make it work properly (found tips here). In Dev it seemed to work correctly but now that it's in production we're getting a 404 Page not found error which "seems" to only occur after a search returns some results and you change the search criteria and try to rerun the search with this modified criteria without first leaving that page (if you click to a different tab and back before changing the search criteria you don't get the error). It doesn't matter which criteria field you change (date, text, LOV) the error comes up consistently. The criteria is submitted via a button (Go request). It's a PL/SQL function body returning SQL query. The only processes that are run is a Reset Pagination on the Go request.
    Is there some quick setting that can be changed that causes this? Or something in 4.0 that is different that I need to change when submitting a page, etc... I can't see anything in the debug & all the variables do have appropriate values.

    A column in the search results was changed to a Simple Checkbox when we upgraded to 4.0 (it has always been a checkbox in the older APEX versions). When I put it back to Standard Report Column I no longer get the page not found error.
    Is there some additional/different setting I need to do in order to use the simple checkbox option in a search results set?
    ETA: I see now that Checkboxes are not intended to work in standard report regions so I'll change them to LOVs or something and my problem should be solved.
    Edited by: mimi_jones on Jul 18, 2011 6:16 AM

  • Page not found error after logging into oiddas

    Hi all,
    I have configured reverse proxy setup for my application server. from external portal is accessible( with proxy hostname externally and internally after login from internet) and also sso server administration site (same as portal ) but when i am trying to access oiddas page i am not able to login and i am getting page not found error. for ssocfg.sh i have given proxyHostName and proxyPort with https and i can see external name and it is redirected with external name for sso authentication but when i logged in i am getting page not found with http 404 msg and i have followed many docs in metalink w.r.t this error but couldn't resolve after too many trials and registrations. could someone help me on this. let me know if you need any information my internal address is http://localhost.localdomain.com:7777/ external(proxy)- https://portal.localdomain.com/
    Thanks

    Hello George,
    Thank you for the quick reply. I will surely try the option suggested by you.
    But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
    Maybe I should be looking at:
    SESSION-TIMEOUT due to kernel:
        Kernel parameter:    rdisp/gui_auto_logout
        Kernel parameter:    rdisp/plugin_auto_logout
    as per the SAP OSS Note: 705013
    But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
    Thanks,
    Gaurav
    Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
    Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

  • Page Not Found Error after Installation

    I just installed coldfusion 7. For some reason the flash
    remoting did not get installed or enabled. Everything appears to
    say it installs by default. Go to
    http://localhost/flashservices/gateway.
    I get a page not found error and it shoots to
    http://localhost/flashservices/.
    Did I miss a step somewhere?
    I installed on a Windows XP box with IIS under the
    C:\Inetpub\wwwroot. Is there something I can check or do? I am
    pulling my hair out over this. Please help.
    Thanks in advance.

    Better use BASIC installation type. If you go for advance installation you have to very carefull selecting all the key parameters. Are you looking for more specific ?? then can you please tell us the purpose of choosing advance installation type.
    Regards
    Rajesh

  • "Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView

    Hello All,
    We are facing an issue related to a SAP Transaction iView on our portal.
    This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
    I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
    We have tried the following parameters without success:
    icm/server_port_0     = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
    icm/keep_alive_timeout (sec.)  = 3600
    icm/conn_timeout                = 5000
    rdisp/plugin_auto_logout       = 1800
    Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
    Thank you for your time!
    Regards,
    Gaurav

    Hello George,
    Thank you for the quick reply. I will surely try the option suggested by you.
    But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
    Maybe I should be looking at:
    SESSION-TIMEOUT due to kernel:
        Kernel parameter:    rdisp/gui_auto_logout
        Kernel parameter:    rdisp/plugin_auto_logout
    as per the SAP OSS Note: 705013
    But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
    Thanks,
    Gaurav
    Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
    Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM

  • After installing itunes update I cannot open my itunes  music files.  How can I fix this problem?

    I installed the latest Itunes update and after installing I cannot open my ITunes music files.  How do I fix this problem. 

    Hey Joey BOD,
    It sounds like you can't open your Music app on your iPhone after the update? First, try force closing the Music app if it is open in multitasking, which you can find out how to do here:
    iOS: Force an app to close
    http://support.apple.com/kb/HT5137
    And if that doesn't work, I would reset the device:
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    via: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/HT1430
    And if that doesn't resolve the issue then I would backup the device to iTunes and restore it. Just be cautious and back up first, since restoring deletes all content and settings:
    iOS: How to back up and restore your content
    http://support.apple.com/kb/HT1766
    Have a great day,
    Delgadoh

  • I receive Not Found errors after installing Edge 2.0

    im facing the same difficulty but im using a PC
    i had uninstalled edge 1.0
    and this is qht i get when im installing the 2.0 version-
    please help me... !!!!

    In my case I finally found that I needed to uninstall the beta version (Adobe Edge Preview) using the uninstaller that came with it before I could install the regular version. I didn't even know it was there until I did a search and finally found the un-install utility.
    I found the answer by doing the same thing you are doing and searching the forums for help in getting rid of Edge Preview.
    Sorry I can't be of more help...

  • HT5642 After installing iOS6.1 my volume buttons dont work as they should how do i fix this!?

    As per description - the phone works but the volume buttons do not show the sliding scale of volume and if you try and play music or watch a film etc you cant get sound. If you plug headphones in it works as normal.
    any ideas how to fix this please - the 6.1 update caused it

    "Cleaning" your phone isn't the solution, it doesn't work, and I don't konw why people keep suggesting this "fix". This is a software issue affecting a small portion of 4s users, and to date no fix. My phone is always clean, it's always updated, and whatever other simple fix you can think of, I've done, still volume issues. A dirty port wouldn't cause the volume slider to disappear. If somone comes up with something that is actually a fix, and not old school Nintendo "blow in it" type advice, I would love to hear it.

  • ITunes will not let me update to iOS 5.1.1 without deleting all my media. How can I fix this?

    When I tried to update from my PC this came up:
    "Updating to iOS 5.1.1 will delete all of the apps and
      media, including iTunes Store purchases, on your
    iPad. To preserve your content, apply this update on
      the computer where you sync your apps, music, videos,
      and photos."
    I don't understand because this is the only computer I use iTunes for my ipad.
    Help please!

    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • After updating to Firefox 15 on my Vista machine Firefox will not open. I have removed and reinstalled it but still won't open. How do I fix this?

    I am running Windows Vista Home Premium and after doing the update for Firefox 15, firefox won't start. I get no error messages or anything it just won't start. I removed Firefox and reinstalled but that didn't help.
    What is next to try?

    Hi lwhealon
    try from Start > Run > and type to check 1 of :
    firefox -safe-mode
    "C:\Program Files\Mozilla Firefox\firefox.exe" -safe-mode '''or'''
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -safe-mode
    (to enable the Run box in win 7 see: [http://blogs.msdn.com/b/tims/archive/2006/09/18/windows-vista-secret-3-bringing-back-start-run.aspx enable Run box win 7] )
    also check if [http://kb.mozillazine.org/Firewalls Firewall] or/and other security software blocking firefox start (like ad-blocker, web-accelerator etc).
    [http://kb.mozillazine.org/Kill_application With Firefox completely closed] (probably because you can not start it), open the [http://kb.mozillazine.org/Installation_directory application folder] (by default, C:\Program Files\Mozilla Firefox on Windows) rename firefox.exe to firefox1.exe, then double-click firefox1.exe. If Firefox runs without problems, it could indicate that your firewall is blocking Firefox.
    good luck

  • Hey so my song cuts off after 40 seconds and goes to the next song in my playlist how do i fix this?

    I had downloaded the new Mac Miller CD after it popped up that I had the option to download it when I opened up Itunes because I had pre-ordered it now some of the songs cut after 40seconds. Any help is appreciated.

    From your description you are looking at the song from iTunes as it exists on your iDevice.  The functionality you are referring to applies when selecting the song in your library, in which case you get the full menu of options like this:
    Depending on other settings, you may be able to add the song to a playlist on your device from those listed at the top of the submenu when you select Add to Playlist.  The Show in Playlist option that you refer to doesn't modify anything - it just lists and allows you to select any other playlists that contain the same song.
    Likewise, the options available for creating new playlists from the "mini menu" at the top left of the screen apply only if you have your library selected, not your device.  In the latter case you will see this:
    The same operation when your library is selected shows the full range of available options:
    I find the most effective approach to be to create and modify playlists within iTunes - as part of the library - and then sync to iDevices, rather than trying to modify any device content directly.

  • "Page Not Found" Err after arnd 5 mins of processing on SAP Trans iView

    Hello All,
    We are facing an issue related to a SAP Transaction iView on our portal.
    This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
    I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
    We have tried the following parameters without success:
    icm/server_port_0 = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
    icm/keep_alive_timeout (sec.) = 3600
    icm/conn_timeout = 5000
    rdisp/plugin_auto_logout = 1800
    Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
    For the current on-going discussion for the same issue, please refer:
    ["Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView;
    Thank you for your time!
    Regards,
    Gaurav
    Edited by: Gaurav Shah on Dec 9, 2008 7:22 PM

    Hi Gaurav,
    I know this thread is old. but i am getting the similar page cannot be displayed after 600 seconds.
    I changed the ICM timeout to 1800 from 600 but it still doesnt seem to work. Were you able to resolve the issue. If yes then please let me know the fix.
    Regards
    Aditya

Maybe you are looking for