Apple please allow the user to edit the genres

You know after apple revamped iTunes 12, and I think that they did a great job,, I started to think about the genres. I really wish that I had control over what genres appeared in my list because the overwhelming majority go unused and I'd like to have only the ones that are pertinent to me in my list. So apple if you are reading this please allow the end user to choose which genres appear in their list and allow them to delete the rest.

See this article.
tt2

Similar Messages

How to show asterisk * effect once the user starts editing the document??

I wrote a java text editor. I creat a new internal frame and allows to open a document.
How to have an effect (an asterisk * follows the filename in title bar) once
the user starts editing the document? And once I save that file, that asterisk * will
disappear. It seems to me we need to add a listener, but not sure how to change
the title bar of internal frame??

just use DocumentListener like
myTextArea.getDocument().addDocumentListener(new DocumentListenet(){
public void changedUpdate(DocumentEvent e){
frame.setTitle( frame.getTitle() + "*" );
implements two other methods too

Roles for the user to Edit the Dimension without being an administrator

Dear Users,
I have a query based on Planning security.
I want the user to edit the dimensions and members in planning application. However, the user cannot be administrator.
I have created a user and assigned the role of "Interactive User" on Planning roles and of "Dimension Editor" on Shared Services access. With this provisioning user the "Administration-->Dimension" is grayed out for the user.
Please suggest if roles can be assigned to the user in order to Edit the Dimension without being an administrator?
Regards,
Praveen.

I am sure this question gets asked over and over, they need to be an administrator.
Cheers
John
http://john-goodwin.blogspot.com/

Allow Other Users To Edit The User Portal

HI all,
Is it possible to allow another user to modify my User Portal without making them a full Admin?
Out HR Dept. would like a tab for their content and would like to edit it themselves.
I'm not keen as they would probably hose the entire site.
Any ideas if this can done?
Regards
Colin
This topic first appeared in the Spiceworks Community

Hi - I believe the issue is related to java versions. I experienced the exact same problem, and the issue was removed.
Several small issues in Java Report Panel with unintended behavior is very often related to too old java versions.
BR
Jess

Allow the user to control the width of the edit forum post input box

I would like to control the width of of the edit-forum post input box. This could be:
automatically adjust the width of the box so that the box doesn't run off the right edge of the window.
have a user global preference to set the preferred width
at least, allow the user to change the width via the change size icon. The three horizontal bars at the lower left of the input box. You can adjust the vertical dimension, but not the horizontal. TenFourFox 4.0.1. This is probably being blocked for some obscure reason.
Here is an example of an over extended right margin:
Curiously enough, the "software" let's me adjust the width & height of the add reason to edit text, but not adjust the width of the more important edit text box.
Robert

Testing
Standard Reply box can be height adjusted but not width.
Same with Advanced Editor
No Adjustment at all in HTL Editor
Edit.
The Edit uses the Advanced Editor
Only Height Adjustment again.
I do seem to remember someone posting about the width and saying they could drag it over the edge of the right hand edge (Into the grey surround)
This may have been a post in the lounge.
It didn't actually try it at the time but have played with it since and have not seen it.
Maybe it is something they "Fixed" in both senses of the word.
Second edit.
I can't alter the box that currently reads "Message Edited by:- ..."
I also can't get this box to accept New lines (they appear in the box but don't post that way)
Corrected Spelling
9:51 PM Wednesday; May 11, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.7)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously
Message was edited by: Ralph Johns (UK)
Message was edited by: Ralph Johns (UK)
and new line with a line space as well

Hi All,i am currently working on a flex application that will allow the user to change the language

Hi All,i am currently working on a flex application that will allow the user to change the language within the application from english to Japanese and vice versa. And everything works fine.
I am using flex 4.5
We allow the user to save records with english or japanese texts.
problem
When the user manually enters Japanese text and tries to save it the record defaults back to the default name (which is in english). But if you copy the entered text and paste it and then save it.It works fine.
Any idea , why this is happening?
Please let me know if the question is not clear.
Looks like there was already a bug
https://issues.apache.org/jira/browse/FLEX-28894?page=com.atlassian.jira.plugin.system.iss uetabpanels:all-tabpanel
Not sure why does it say , Resolved .
-KB
Message was edited by: bKartik.b

By Payal integration , you mean paypal button html ? or payment gateway setup etc ? If its a gateway configuration for your site domain then single page for all layout will work , but if you are using button code for all renditions then you would need to create separate pages for all.
Thanks,
Sanjit

Apple, please allow downgrade to iOS7 for iPad 2 users. iOS8 is vera slow!

Apple, please allow downgrade to iOS7 for iPad 2 users. iOS8 is vera slow!

I had the same problem with my iPad 2 after upgrading to ios8. I went to Apple Store to ask and confirmed that it is a very common problem to ipad2 owners. I asked the techician why didn't we get a "warning" from Apple, and he said Apply was not responsible and simply not in their agenda for that. I was very disappointed as I thought essentially Apple wanted to push older iPad owners to buy the ne, because my iPad 2 is basically a piece of crap after the upgrade. I understand, our machines get old and not powerful enough to take newer updates. But what is unreasonable and unacceptable is the fact that Apple did not provide any guidance on this before owners decided to upgrade iOS or not.

How to use progress indicator which block the user for editing ?

Hi All,
I have a requirement where i need to show a round progress bar while processing to the database.For example :- I have a bounded taskflow and inside it I have a two jspx page called as "First.jspx" and "Second.jspx".And i have two textboxes and one "Save" button on first.jspx page.
Now when user puts the values in the textboxes and hits the "Save" button , my ticker or progress indicator should say "Please wait while processing" and as soon as the transaction is complete , i need to show another page which is "Second.jspx" page. "Save" button action has method inside a managed bean which has some functionality and then it executes the VO(View Object) and commits the data.
How should i implement the indicator?
I have read this article :- http://www.oracle.com/technetwork/developer-tools/adf/learnmore/42-progressbarcolor-169184.pdf but it doesn't fit to my requirement.I need indicator which holds the user to edit anything on the page.Like what we get when we do any transaction in banks while navigating to payment gateway.
Please suggest!!!
Thanks and Regards,
Shah

Hi Shah,
The answer was around the same are that you were looking into. http://www.oracle.com/technetwork/developer-tools/adf/learnmore/27-long-running-queries-169166.pdf but the sample was the 27.
- Juan Camilo

Detecting which line the User is Editing IN table control

Hi,
I am doing a Dialog programming where there is a Table control. Now the problem is I have to decide to checks certain rules based on data entered in the Table control. But the Rules should be applicable only to the Row in which the User is entering data. And even if the the same rules are failing in another Row of the Table control it should not get validated i.e The rule should be applicable only to the ROW the user is entering the data or Changing the Data.
How do i sense in which row the User is entering data in the PAI of the Table control.

You will have to use GET CURSOR, please do F1 help on GET CURSOR, your answer is there.
You will be doing something like this.....
DATA: CURSORFIELD(20) TYPE C,
CURSORLINE TYPE I,
CURSORVALUE(20) TYPE C.
GET CURSOR FIELD CURSORFIELD LINE CURSORLINE VALUE CURSORVALUE.
* To know exactly which line in the internal table you
* must account for which page of table control the user
* is currently one, so you need to add the TOP_LINE
* value from the table control to find the exact
* internal table row
* Set cursorline and read table.
CURSORLINE = ( CURSORLINE + <table_control>-TOP_LINE ) - 1.
Regards,
Rich Heilman
Message was edited by: Rich Heilman

Prevent User from Editing the Credit Limit Field

Hi
I would like to find out if there is a way to restrict user that has full authorisation to BP Master Data from changing a specific field on the Master Data.
The scenario is that we allow an user to edit BP Master Data but would like to prevent the user from changing the credit/committment limit fields as it has financial risk and only managers can do so.
If there any way within the stand SAP authorization that can achieve this requirement?
BR,
Jimmy

Hi Jimmy,
This would not be achievable through standard authorization. You may try SP_Transaction_Notification instead. Search within forum, there are many threads discussing this SP.
Thanks,
Gordon

Way to allow the user access to the saved lists of this Z report

We have a Z report that we want to run at midnight each Sunday and then view the output/layout first thing Monday morning. We can schedule the report to run but it appears that the only way we can save the output as a 'file' for later viewing is by using the "Save with ID" option, which puts the output into a SAP 'saved list'.
The problem with this is that it doesn't appear to be possible to access that list from the Z-report - it would appear that you have to go into SQ01 and use the 'saved list' button. This means giving the Z- report user access to SQ01 as well as Z-report, which, for security (SOD) reasons we don't want to do.
We can run the report in foreground with the output option "File store" and save the output as a file to a specified location,. But this option doesn't appear to be available when the report is scheduled as a background job. If this is done, the background job runs but there's no output anywhere, as far as we can tell.
So what want is to run the report in background but with the output option 'File store' or equivalent (i.e. an output stored somewhere that the report user can view). Is this not possible, or have we missed something in setting up the report run?
Or is there a way to allow the user access to the saved lists of this Z report without giving them T-code SQ01?
Thanks

Hi !
I just wonder if the answer from Varishtb below did solve your propblem.
I have exactly the same problem as you. I also want to be able to look at the saved list without using the sq01.
If you solved it I will be grateful to get the solution.
regards Lars
answer:
You can call the infoset query directly from a transaction code. There's
no need to copy it as a 'Z-report' (or as a custom report). In fact,
everytime you're copying an infoset query to a report, you're calling
for problems the next time you face an upgrade. (That is because SAP
changes the internal logic used to handle the infosets queries from
version to version)
We're using some infoset queries and they work fine this way.

When creating a fillable form fields from an existing pdf file, how do you set or allow end user to set the font size in the fields?

I successfully created a form filled pdf using an existing pdf document. However, the font size is too large to allow end user to type in information in the form box. Is there a way to 1)globally set all of the form fields when generated to a much smaller font size &/or 2) allow end user to change the font size if needed to put all information in one box without font being so large?

Hi DenisonDoc,
There is no option right now to set properties globally primarily for Text fields. You may make sure fields doesn't contain anything.
Select all the text filed from the form and right click any of the selected field make sure all of them are selected choose properties --> Appearance there you can choose Font Size and Font type.
- End users cant change size and type of font. It is up to designer.
Regards,
Ajlan Huda.

Is it possible for a user to edit the output of a form before printing?

This might sound odd but the business have requested the ability to edit the text of a Smartform before printing. i.e. a standard form can be printed 'as is' for most employees but certain exceptions may require the wording to be slightly amended.
I don't think this is possible but I want to know for sure.
Any advice is much appreciated.
Many thanks
Matt

Hi Matt,
Sanjay was right.
That is the best you can do as of now.
Have a screen when the user has a chance of modifying the texts that are currently being displayed on the print. Let him save the texts and then trigger the smrtform, which would pick the updated texts instead of the old ones.
the function modules READ_TEXT, SAVE_TEXT may come in handy here.
regards,
Ravi

Restrict the user to edit Activity

Hi guys
What will be the validation for the below scenarion
1) To restrict the user to edit any activity a " 5 Days after the close of the month". for eg is a activity is created on 13/02/2011 , it can be edited till 05/03/2011
Waiting for the solutions

Another approach will be to use a pair of dynamic pages. Dynamic Pages for Task are base on "Type".
So if you have Types like ToDo, CallBack, Research create 3 more as ToDo-RO, CallBack-RO, Research-RO
Make copies of the Task Pages that you use for ToDo, CallBack, Research and make all the field as Read Only.
So "Cust ToDo Task Page" is copies as "Cust ToDo Task Page - RO" and so on
All fields in the - RO pages are Read Only.
Create a Dynamic Page and assign the correct pages to the Type Values
Type "ToDo" has the "Cust ToDo Task Page"
Type "ToDo-RO" has the "Cust ToDo Task Page - RO"
and so on
Create an field "RecordRO" with Field Type "Checkbox" called Default Value as "N". Have a workflow set this field as "Y" on appropriate event or time tigger.
In your case one workflow will be Time triggered to set this to Y on 5th of Month post the creation. So simply export on 4th or 5th night all Records that have the filed as N and reimport the Field as Y. Else use a WebService.
Have one more workflow (Workflow Expression could be like FieldValue('<bRecordRO_ITAG>') = "Y") to set Type as PreValue of Type +"-RO"; Update Expression will be PRE('<Type>') + "-RO" with Overwrite Existing Values as TRUE
Let me know if this works for you.
How much we miss the On Premise State Models :-(.

Web Site Display Language - Allowing the user to chose the language

I have created a web site that allows the user to display the page in the language of the users choice.
Windows Internet Explorer and FireFox both allow the user to select a language option, and the web page will display the text in that language.
Safari on the Mac does not allow the display to be changed.
I have used the System Preferences - International option to select the language that I would like to use. The operating system menus and other options display as expected.
Safari does not.

I have created a web site that allows the user to display the page in the language of the users choice.
What is the website?

Apple please allow the user to edit the genres

Similar Messages

Maybe you are looking for