Apple Pro Rez Codec with Logic Pro??

Has anyone used or seen the Apple Pro Rez codec (HD quicktime codec I believe?)? I will need to be working with this very soon, and while it's 23.98fps and I know Logic doesn't support that frame rate, I need to know if it can be used via a canpous FW box with Logic? Does it need to be exported? Etc?
Any thoughts or experiences anyone has would be greatly appreciated. thanks so much-
Josh

I presume you will be producing music for picture(?).
I have not used it myself but I know that any movie encoded with it will be very cpu intensive. The codec was developed for video editors, to enable (practical) high quality hi-def editing. Most folk believe a new high-end macpro is the only computer that is capable of using this codec successfully, but that is with regard to video editing.
A movie encoded this way would be definately unsuitable to use alongside logic. There would be just too much CPU power going to the movie playback, leaving very little for logic.
Your best bet is to re-encode the movie with a more efficient codec. You'll see picture quality reduce but this should not be a problem.
Personally I would never use a codec thats any more demanding than DV. And DV is pushing things on lesser computers.
I suggest you get quicktime pro if you haven't got it yet and export the movie with a different codec. I have used the codec Photo-JPEG with great success. It's gentle on CPU resources and provides proper full frames - important if you are doing frame accurate sync.
The other way you could do it is to run the original movie on a second syncronized computer
Your BIG problem is that logic itself will NOT work with 23.98fps properly. From what I recall, this means Logic's timecode will not match the movie's (as it can't be set to 23.98fps). There really is not a fix for this other than getting "production" to allow for it and (somehow) provide movies with an alternative frame rate. To be honest this is one (very good) reason to use a different DAW.
I wish you luck. This is the sort of thing that could prove a nightmare!

Similar Messages

Final Cut Pro X conflicting with Logic Pro 9

As soon as I installed Logic Pro 9, Final Cut Pro X keeps freezing. It launches normally, as soon I play an item from the event browser FCPX freezes.
Anyone knows how to solve that?
Thanks in advance

Hi Kolbi,
I have just experienced a similar problem: I recently performed a complete reinstall of my system and throught I would keep it simple by just running FCPX and LP9 (installed in that order). Unfortunately I found (yesterday) that FCPX behaves erratically. Have you found a way to solve your problem? If so please let me know.

Questions about Novation Remote 25SL integration with Logic Pro 8

Preface: I have to apologize in advance if this seems somewhat confusing. I'm sure some of the terms I'm using are just plain wrong - I'm somewhat of a n00b.
I have a Novation Remote 25SL configured to use AutoMap with Logic Pro 8 from Novation's website and most things are working well. It's confusing at times because sometimes I find it hard to tell what mode the keyboard is in, but that's ok - it's the least of my worries. Based on what I've seen through reading the manuals and my own experimentation, I have a couple of questions:
- Despite what the guy at the store told me, I can't seem to figure out how to select different kits from within the SL. For example, if I have a garageband instrument selected on a track - can I use the data/select knob on the SL as it is now, or do I have to program that somewhere, somehow? Or if I have Ultrabeat on a track, can I use the knob to select the different kits/banks?
- Is there a way to control non-Apple AU plugins like the rest of those which ship with Logic? All the sexy looking ones like Ringshifter, Compressor, Overdrive, etc. It seems odd that Remote will go into Mixer Automap mode and be able to control the certain portions of the instruments, but not the plugins that are automatically loaded into the channel strip when the instrument is loaded.
- I have a 25 key Remote. In Ultrabeat, I find the key maps miss a chunk of notes between where the drum pads end and where the keyboard starts (or vice-verse). Is there a way to get it so each key has a mapping? 25 keys in Ultrabeat, 25 keys on the board plus 8 drum pads - seems like there's lots of room.
Thanks in advance for all your feedback.
Message was edited by: Jason Lixfeld

Follow-up research:
Apparently there is a driver conflict between the AlphaTrack and the ReMOTE. So far I have got the ReMOTE working - sort of - in Logic using the following method which was published at Novation's Answerbase:
1. disconnect the alphatrack.
2. launch Logic and then turn on the ReMOTE SL.
3. Go into the Environment window, and add a Monitor Object. Connect it to the Remote SL's ports 2 and 3.
So far, this seems to at least get MIDI note input into Logic, but the Automap function seems a bit sketchy so far. This will depend on Novation updating Automap and the SL's firmware for Logic 8.
As noted previously, there doesn't seem to be any AlphaTrack support in Logic 8 yet and it's up to Apple to make it work. They do support their TranzPort product, so with luck there'll be support in the next update.
I'd really love to use BOTH control surfaces with Logic simultaneously -- the AlphaTrack with the Mixer and plugins, the ReMOTE with Software Instruments. I suppose it might take some interesting mapping but this doesn't seem like that strange a setup -- there are plenty of "mixer surfaces" like the M-Audio one, and the Novation Automap stuff is quite popular....

Im going to buy a macbook pro 13" 1199$ Is Logic Pro Good On Him? And Other Apple Software

im going to buy a macbook pro 13" 1199$ Is Logic Pro Good On Him? And Other Apple Software
Like iWeb, iMovie, And Staffs Like That?

As a hobbyist dual core Macbook Pro 13-1nch will do fine.
For professional work, you are better off with Macbook Pro 15-inch quad core i7..
iWeb is no more available from Apple. You may have to check Amzon for it.

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11 ;)

Can i use Avid mbox pro with logic pro x? And also which mac would be best for using avid pro tools 11

If your info is correct you need to first buy Snow Leopard from the Apple on-line store ($20) install and update to 10.6.8 and then buy Lion from the App Store for $20.

Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve

Bought and installing Logic X hope to use all my Pro Tools Stuff with Logic X to reduce the learning curve for my Wife who is not very computer savy All her music is 96K and degitized with Pro Tools from analoge 16track tape.

mende1 wrote:
Welcome to Apple Support Communities
Apple offered a refund for users who purchased Logic Pro 9 30 days or less before the Logic Pro X launch, but they don't do it anymore, so if you want to upgrade to Logic Pro X, you have to purchase it in the Mac App Store
Part of this is incorrect...
Some App Store employee's "accidentally" (but in good faith) issued refunds to a few users who had purchased Logic 9 within 30 days prior to the mid-July release of Logic-X. Word quickly came down from Apple HQ that this was against App Store policy and the practice was immediately stopped.
To the original poster.. you never stood a chance, even if they were issuing refunds you didn't fall within the 30 day period. There were many who purchased Logic 9 a few days before the LX release who did not get a refund.

Will Lion work ok with Logic Pro and 3rd party plugins?

Will Lion OS work ok with Logic Pro and 3rd party plugins?
Any help would be much appreciated,
Regards James

Well, Sylenth I know... works under Logic Pro 9 and it should be found by left clicking and holding... the Software Insturment Button (The one just below where it says i/o and then scrolling down in the menu that appears to the Instrument section below the Apple Plugins...
I don't know about Massive 1.01 because i think that one is not Logic 9 compatible because it is so old.... and I have never used Vanguard... but according to it's specs the latest version should be found in the same place as Sylenth...
Both Sylenth and Vanguard are 32bit plugins...
...and.. it probably doesn't help that you are using older/not 'legal' copies of these plugins.... *ahem*

Help with Logic Pro 8 Outputs

Hi
Struggling with something that i imagine is very simple but just cant work it out! Please help me.
I will be using Logic 8 within a live environment and need to basically get various audio tracks 'out' of logic via my interface into a mixing desk. I have 8 sub outs on my interface which is fine for me. (prob lots of people do this also with a mixing desk in the studio environment for intergration with the desk and outboard gear so i 100% sure it can be done!)
Prob 1 is that the track sub outs in logic come in stereo pairs. If i want bass to go to output 1 , and kick for eg to go to output 2, how can i do this???? Is there a way to change the track outputs to mono?
Prob 2 is that if i change the outputs in one session, for example click to output 3 - 4, vocals for example to output 5 and 6, then save the session, close and reopen, they have all reverted to output 1 and 2. In a live situation it is annoying to have to change these before each song starts!
I play in a electro band that incorperates live drums, analog synths, logic audio (backing tracks kinda thing) aswell as live instruments, and finding logic pretty challenging to use for this!! We are flat broke and cant afford new stuff so have been living with it but we are now starting to need more outputs (for the benefits of live mixing , ie not giving the engineer a stereo out) . Surely the mixer in logic is capable of these totally bog standard audio routing options?!?!?
Thanks alot for any help
David

jayme Lewis wrote:
So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should).
?It's highest settings?
Do you mean the sample buffer is at 32 or 1024.
Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
Try these settings under Preferences/Audio.
I/O Buffer Size - 256
Process buffer - medium
Do NOT have the I/O Safety Buffer selected.
More info.
What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
When you open Logic's CPU meters are you seeing a single core spiking?
What effects are being used on the audio and single VI track?
pancenter-

Help with Logic Pro 8, Apogee Symphony System, and Nehalem 8-core Mac Pro

So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should). Of course I could drop the buffer size and unclick a few things here and there. but why? Is my machine powerful enough to handle it or not?
I've deleted the plist a bunch of times and repaired hardisks and everything. any help from a certified LOGIC pro would be excellent and much appreciated! thanks in advance,
jayme

jayme Lewis wrote:
So here's the problem. I went on a shopping spree recently and purchased an 8-core Nehalem 8-core Mac with 14 GB RAM, Apogee's Symphony system (With Rosetta 800 and AD-16X), and I use this gear with Logic Pro 8.
I still get system overload messages. Sometimes with only 1 virtual instrument and 8 audio tracks!
What gives? I'm running the fastest machine on the fastest system with the fastest/cleanest hardware.
I'm running Logic Pro on all of its highest settings (like it should).
?It's highest settings?
Do you mean the sample buffer is at 32 or 1024.
Even though you have Apple's flagship system it's still possible for Logic to bring it to it's knees. High sample rates plus a couple of space designer reverbs can send a single core into an overload condition.
Try these settings under Preferences/Audio.
I/O Buffer Size - 256
Process buffer - medium
Do NOT have the I/O Safety Buffer selected.
More info.
What sample rate and bit depth are you recording at? ie: 48kHz, 24-bit?
When you open Logic's CPU meters are you seeing a single core spiking?
What effects are being used on the audio and single VI track?
pancenter-

Setting Up Roland A-Pro Control surfaces with Logic

I have struggled with Logic Pro 8.0.3 and a new Roland A-500Pro midi keyboard which was reputed to be "easy to configure with a Mac".
Despite many discussions with a Roland help person (he tried very hard), The A-Pro control maps provided just don't work at all. Buttons to select tracks actually play sounds. I have both set up according to the Roland instructions (no good) and according to this forum post (https://discussions.apple.com/message/17034355#17034355) which suggest you don't even need to use the Roland interface.
Anybody have an envrionment that works?? or can suggest ways to configure.
Desperate for help.

The Yamaha O1v had a fader mapping setup that worked really really well with Cubase. You simply selected the O1v from a drop down menu in Cubase and all the faders and EQ settings automatically mapped to the board. Only a few boards were listed in the Cubase menu.
Curious if there are certain boards might be listed in a similar feature in Logic.
(Planning on jumping on the Logic train at the same time as picking up a board...)

01v96i Yamaha...will it work with logic pro X

I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Control external MIDI synth with Logic Pro X

I purchaced Logic Pro X to use it as a MIDI-sequencer for my external stagepiano: the Roland RD-700sx including two expansion boards (SRX-04 and SRX-10). I want to make records to create my own music. Before I record it as audio I want to record it as MIDI, because in that form it's easier to make adjustments.
The RD-700sx is GM-compatible, though the better quality sounds are stored in certain banks, which one can select bij entering a specific number to the MIDI control assignments MSB and LSB. For example: to select the Superior Grand Piano, MSB = 87, LSB = 64 and PC (program change) = 1. To select the 60's E. Piano 2, MSB = 87, LSB = 65 and PC = 5. To select the first tone wheel organ MSB = 112, LSB = 0 and PC = 1. To select the SX Rock Kit (drums) MSB = 86, LSB = 72 and PC = 2. And to select the staccato cello on my expansion board MSB = 93, LSB = 3 and PC = 79.
I spent a lot of time searching and asking on the internet how to select the desired sounds, but I don't know how to do it. So far I know you have to create a multitimbral MIDI environment and on each of the 16 channels you can assign a bank and enter the values of MSB and LSB. I found this article: Logic Pro/Express 9: Defining Custom Bank Messages - Apple Support
I understand a part of it, though I have too little experience with Logic Pro X to get the job done. Can someone please explain it to me from the beginning to the end? You would help me a lot!!!

did you do a firmware update on 003 ?

Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac

Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac.
Pls help
tks
Kind Regards
Richard Garrell
Belo Horizonte
Brazil

Hi Richard Gl ,
Welcome to the Apple Support Community!
I understand that your Logic Remote is not connecting. In this situation I suggest reading over the attached information and making sure that Logic Remote is set up correctly. I would also suggest trying to connect using Wi-Fi and Bluetooth.
Logic Remote for iPad: Get started
Cheers,
Joe

Will the Tascam FW-1884 work with Logic Pro X?

Hello,
I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
Tascam has not released 64 bit drivers for this device! Can anyone shed any light on this? Will it work only as a control surface and not an audio interface? Is the documentation in error? Anyone have this working with Logic Pro X?
Thanks,
Lyford Rome

Lyford,
Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

Using the MPK Mini with Logic Pro

Hi, I got an MPK Mini with Logic Pro.
At first it was working fine but I left it for a couple of weeks but now when I plug it in, Logic doesn't recognise it anymore.
I've read this http://documentation.apple.com/en/logicpro/controlsurfacessupport/index.html#cha pter=1%26section=1 but I still haven't been able to get it working.
Has anyone got any ideas?

Do you have Gear Box? If you do try launching Gear Box then see if it works.
Thunder

Apple Pro Rez Codec with Logic Pro??

Similar Messages

Maybe you are looking for