Apple Products no longer AirPrint with new routers

I have a OfficeJet Pro 8500 A910 Series printer and was using a linksys WRT160N V2 router (open without a password protection). I also have an HP Laptop, a MacBook Pro Retina, two IPhones and an IPad. All devices were able to print wirelessly on the Office Jet.
I sought to repace the router first with a Linksys AC1200 and then with an Apple Airport Extreme. With both routers the HP laptop was able to print wirelessly to the printer. However, the apple products could not. All equipment is on the same network (password protected). Sometimes the Apple products can see the printer and I think when first connected they will print. But within a few minutes will no longer be able to perform an airprint. If I delete the printer and try to add it - the printer disappears as a nearby printer and sometimes does not show up as a bonjour printer either.
While I can limp along with the older router, I worry that when it finally dies, I will no longer be able to use this printer wirelessly. I have both new routers in their boxes ready to be returned - but perhaps there is a solution.
I have spent hours on the phone with both Apple and witih Linksys to no avail. I do think this is an HP problem and so do they.
I have tried limiting the router to a 2.x Ghz - and note that using a 5 Ghs frequency makes the Apple products ever less happy.

Hi @StarvationPoint,
Welcome to the HP Support Forums. I gather that since changing your router that you are encountering difficulties in using AirPrint from your Apple mobile devices.
I have included a post by @Shirlzz1 on the forums titled Help Determine if your router can support AirPrint with the Bonjour Discovery App. It will walk you through downloading an app that checks to see if the routers support Bonjour (I know the Apple AirPort Extreme does).
I’ve also included the Printing Over a Wireless Network with Apple's AirPrint FAQs document. It has some great trouble shooting steps in the “What if a 'No AirPrint Printers Found' message displays on my Apple device?” section.
Please let me know the outcome.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

D.p.middleton the Adobe Application Manager has been available for quite some time. It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates. In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
2. this could be due to you selecting a trial subscription to the Creative Cloud? If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
#3 I believe this was already mostly covered in the answer to #2.
#4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
I hope this provides you many of the answers you are looking for? If not please feel free to respond back with any additional inquiries which you have. Also if you are experiencing any difficulties with the update process please post this as well. It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or sedtting I can use locally to restrict incoming calls to FaceTime without going to the carrier?

I have started getting spammed on multiple Apple products (iPhone and iPad) with FaceTime calls since the recent IOS update. Is there any feature or setting I can use locally to restrict incoming calls to a FaceTime account without going to the carrier?

After calling AT&T tech support one more time, and explaining to them that the glitch was on their network, they admitted that the problem was at their tower...
I continued to use the phone on EDGE mode for two more days until the problem was fixed.
I even got a call back from a tech support guy asking me if my phone was working properly....
I wish they would have admitted to the problem before I sat at the apple store for 2 hours.

My iphone 5 is no longer charging with new apple cord and lint has been cleared. Please help.

My iphone 5 is no longer charging with a new apple cord and lint has been cleared. Please help. It just started happening this week and I have tried everything. Is this a software / driver problem? We all know the battery doesn't last a full day if you "use" your phone like a normal person. I am very frustrated! My daughters iphone 5 started doing this a few days later than mine as well.

Not much help I'm afraid but I use my iPhone 5 like a 'normal' person and it's battery almost all day. Perhaps there's a hardware fault somewhere? Have you tried the usual reset and restore?

Why the Apple products does not work with Adobe flash player?

Could be better if the Apple products work with Adobe Flash Player, I know that Steve does not like to work with them, but I think will be necessary soon.

From Adobe's own site:
*** NOTE: FLASH PLAYER IS NO LONGER BEING UPDATED FOR NEW DEVICE CONFIGURATIONS. FLASH PLAYER WILL NOT BE SUPPORTED ON ANY ANDROID VERSION BEYOND ANDROID 4.0.x ***
While Flash Player remains on Google Play for installation on Android devices that are certified by the manufacturer, installing Flash Player on an uncertified device may result in unexpected behavior and can potentially destabilize your device. A list of certified devices can be found at http://www.adobe.com/go/certifieddevices. Flash Player WILL NOT be supported on any device shipped with or upgraded to an Android version beyond Android 4.0.x
Further comments on what is the case on Android devices is irrelevant. Adobe has dropped further development of Flash for mobile devices and Apple has made no indications that they have any plans to do so themselves, so it is highly unlikely that there will ever be a native Flash player for any iOS device.
'nuff said on the matter. Regards.

Multiple Apple Remotes no longer work with Apple TV!

I've been using Apple TVs since the minute Steve Jobs introduced them in 2007. I bought the 2nd and 3rd Generation Apple TVs the minute each of them were introduced. I've been watching every Apple Keynote Address since they were available online or on CDs from the early 1990s, on my HDTV via my latest Apple TV when that was possible. I watch far more TV through my Apple TV than via my Cable Box, much of it music and music videos from iTunes on my 2006 Mac Pro! But as of YESTERDAY I am seriously thinking of getting another, ANY OTHER manufacturer's similar internet streaming box!!!
WHY??? Because YESTERDAY, for no apparent reason except some programmer's or software engineer's stupidity, my Apple TV stopped working with all but ONE of my Apple REMOTES!!!
Why is that stupid? Because, in my household there are three people who use Apple TV all day, and each of them have an aluminum Apple Remote which they all use to control what the Apple TV is streaming. We have two other Apple Remotes lying around in case one of us misplaces his or her Apple Remote, which happens occasionally. ALL FIVE of the Apple Remotes, just like the beige plastic Apple Remotes that they replaced, always worked with all three of my Apple TVs! Then yesterday, suddenly, only the LAST Apple Remote that was paired with this 3rd Generation Apple TV is able to control it.
I've spent HOURS trying to fix this. This wasn't caused by an Automatic Update to the Apple TV's iOS; there has been no update in recent days. I've got Automatic Update turned on, just as I, a good Apple citizen, have my Apple TV set up to automatically send back Usage Data to Apple. I've rebooted my Apple TV. I've put brand new 2032 button batteries into my Apple Remotes. I pulled the power cord out of my Apple TV for 15 seconds and again for five minutes and then restarted it. As per instructions, I have Unpaired and re-Paired each and all of my 5 Apple Remotes. All to no avail. Only the last Apple Remote that was paired with the Apple TV works! Horrible. And STUPID, if it was a deliberate programming decision and it was introduced in a minor automatic update.
Worse, I've been using the Remote app on my 5th Generation iPod touch to replace ONE of the unusable Apple Remotes, and as of a couple of minutes ago even THAT stopped working with my Apple TV! Well, I was able to fix that fairly easily by pairing the iPod touch Remote app with my Mac Pro and then pairing it again with my Apple TV. But I don't think that solution would be so easy for many non-technologically-inclined users. I also don't think that a $200 or $300 iPod touch is a very acceptable replacement for a $20 Apple Remote, especially since everyone buys iPod touches for totally different uses (I use mine primarily for taking notes using voice-activated audio or video -- it is by far the best device for that purpose out there -- police departments should take note).
I'm hoping that this multiple Apple Remote problem somehow resolves itself, unless it is a hardware problem with my Apple TV. If so, I can hold out until Apple's media event next week, which I HOPE will premiere a new 4th Generation Apple TV, hopefully which will once again allow my five Apple Remotes to all control my Apple TV interdependently, without having to Unpair and Pair each one each time you wanted to use it, requiring you to quit whichever Apple TV app you were using each time, or alternatively to use Sneaker-Net to deliver the one working Apple Remote to each person who wants to use it, which can be difficult since at least one of the users is very ill! (Whew! A long sentence. But I hope you get the point.)
Two days ago, I could never have imagined myself getting a Roku or an Amazon, Sony, Microsoft or some other streaming device. It just proves how fast a stupid little decision (if it was deliberate) can turn EVERYTHING around!

People have a misconception with remote pairing (as does the description on this page -> Pairing your Apple Remote with your computer - Apple Support).
The 1st paragraph is incorrect.
The 2nd paragraph is correct.
"If you have several Mac computers or an Apple TV that use the Apple remote, or other devices with integrated infrared ("IR") receivers in one room, you can "pair" your Apple Remote with a specific Apple device so it doesn't interfere with other Apple devices or IR devices nearby.
Pairing allows you to set the receiving Apple device so that only it can be controlled by one remote. Learn how to pair your Apple Remote"
Pairing sets the device to read only a specific remote.
It does not set a specific remote to work only with a specific device. ie. if you point th remote at another Apple device (that is not paired) it will control it.

Normally if anyone buys an apple product (mac) , it comes with a built-in-apps that should be considered ( built in ) , Then why when the mac faces a mistake or an error that forces it to format , these apps don't show up ? etc : iMovie , garageband

normally if anyone buys an apple product with a specific model (mac) , it comes with a built-in-apps that should be considered ( built in ) , Then why when the mac faces a mistake or an error that forces it to format , these apps don't show up ? etc : iMovie , garageband ...
considered it should be '' BUILT IN APPS '' ??
So does it really make sense that i should buy these apps again after i already payed an extra amount of money in the first place to get a model that includes them ??
after formatting my mac these apps should be there like its a whole new device that i opened !!!
I hope anyone with any useful information can share his thoughts or help with further steps .

Downloading past purchases from the App Store, iBookstore, and iTunes Store

Am I allowed to Train and repair apple products from home as a new business?

I love apple products and I was thinking of a computer repair business. However, I would like to mainly concentrate on Apple Hardware.
On the ACMT page it states something like the ACMT does not authorise you to repair apple products. I read about the service centre but you need a minimum of 50 machines or something.
I've seen small businesses on the internet that do apple repairs so how do they manage it?
What do I have to do to be able to repair apple products and abide by all rules?
I am in the UK.
Many thanks,
~Luke

Luke,
Short answer: Yes, maybe.
Court cases on this subject go back a hundred years. A man by the name of George Eastman invented roll film but the camera had to be loaded into the camera in a dark room. His philosophy was that he could give the camera away but you had to buy the film and processing from him. The courts did not allow him to restrain trade in that manner. (BTW, you will not find that on Kodak's history site. See US vs. Eastman Kodak, 1915)
Bill Gates had a similar idea. 'Give' away his OS for $20 a copy as long as the manufacturer of the computer hardware preinstalled his OS on every box that left the factory. He soon had most of the world hooked. I remember shopping for computers in 1984 and hearing the plug for MS-DOS.
If you make a service agreement with Apple, you are bound by their rules. But, once someone buys an Apple device, they own the device, not Apple. Courts have limited how many millions and billions of Dollars George and Bill could make with their attempted monopolies.
While the US court cases will not control the outcome of a British court ruling, the information is instructive. Also, read the cases where Steve Jobs wanted to exclude Microsoft from making cheap imitations of his OS with Windows, even after Steve lifted the ideas from Xerox.
There are plenty of self righteous attorneys out there willing to work for self righteous inventors to protect monopolies. Then you have open source and the San Francisco Home Brew Club.
Your question is a little too deep for this forum so read up on your own or hire an attorney who has already done the reading. There is plenty of reading for everyone!

IDVD no longer comes with new software

I recently purchased a MBP and it came installed with iLife'11. I was disappointed to notice that it did not include iDVD. Is there a way that I can install iDVD?

Apple should make it clearer that new computers don't ship with iDVD or iWeb. The absence of mentioning those specific applications on the computer pages, while still including them with the boxed iLife suite, is not explicit enough. Especially not after years of including the entire iLife suite with new computers.
If you go to this page: http://www.apple.com/imac/specs.html
It doesn't mention iDVD or iWeb, but there is a link, "Learn more about iLife", and there it does mention iDVD and iWeb. That's confusing. They have to make it more clear that the boxed copy inludes those applications but new computers do not.
I guess Apple figures only a small percentage of people will miss those applications. And they're probably correct about that point.

Out of Band Management with new routers (1941 & 2921) IOS 15.0

Hi,
Our out of band connections with the new routers (1941 & 2921) with the new IOS 15.0 are not working.
Any suggestion would be helpful.
Here is our configs:
Router:
line aux 0
exec-timeout 3 0
modem InOut
transport input all
stopbits 1
Modem(D-Link):
at&fs0=1s2=127s37=9e1q1&c1&d2&s1&k0&r0&w
Here is an output of the debug command:
*May 17 05:02:14.206 UTC: TTY1: CTS went down on IDLE line
*May 17 05:02:17.206 UTC: TTY1: CTS came up on IDLE line
*May 17 05:02:22.206 UTC: TTY1: CTS went down on IDLE line
*May 17 05:02:25.206 UTC: TTY1: DSR came up
*May 17 05:02:25.206 UTC: tty1: Modem: IDLE->(unknown)
*May 17 05:02:25.206 UTC: TTY1: EXEC creation
*May 17 05:02:25.206 UTC: TTY1: create timer type 1, 30 seconds
*May 17 05:02:25.674 UTC: TTY1: create timer type 10, 30 seconds
*May 17 05:02:26.154 UTC: TTY1: pause timer type 10 (OK)
*May 17 05:02:26.154 UTC: TTY1: resume timer type 10 (OK)
*May 17 05:02:26.174 UTC: TTY1: pause timer type 10 (OK)
*May 17 05:02:26.206 UTC: TTY1: DSR was dropped
*May 17 05:02:26.206 UTC: TTY1: Set DTR to 0
*May 17 05:02:26.206 UTC: TTY1: Quickly dropping DTR
*May 17 05:02:26.206 UTC: tty1: Modem: READY->HASPROC
*May 17 05:02:30.174 UTC: TTY1: resume timer type 10 (OK)
*May 17 05:02:30.174 UTC: TTY1: pause timer type 10 (OK)
*May 17 05:02:32.174 UTC: TTY1: Line reset by "Exec"
*May 17 05:02:32.174 UTC: TTY1: Modem: HASPROC->HANGUP
*May 17 05:02:32.174 UTC: TTY1: no timer type 0 to destroy
*May 17 05:02:32.174 UTC: TTY1: destroy timer type 1
*May 17 05:02:32.174 UTC: TTY1: no timer type 3 to destroy
*May 17 05:02:32.174 UTC: TTY1: no timer type 4 to destroy
*May 17 05:02:32.174 UTC: TTY1: destroy timer type 10
*May 17 05:02:32.174 UTC: TTY1: no timer type 2 to destroy
*May 17 05:02:32.230 UTC: TTY1: dropping DTR, hanging up
*May 17 05:02:32.230 UTC: TTY1: Set DTR to 0
*May 17 05:02:32.230 UTC: tty1: Modem: HANGUP->(unknown)
*May 17 05:02:32.230 UTC: TTY1: cleanup pending. Delaying DTR
*May 17 05:02:34.230 UTC: TTY1: restoring DTR
*May 17 05:02:34.230 UTC: TTY1: Set DTR to 1
*May 17 05:02:35.230 UTC: TTY1: CTS came up on IDLE line
It goes into the handshake but then disconnects immediately.
Thanks in advance,

tray cable with this scheme of pin connector
RJ45 DB9
1 7
2 4
3 3
4 5
5 5
6 2
7 1
8 8
init string at&F1S0=1

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

Apple 23" HD Cinema Display no longer working with new Macbook Pro

I bought a 23" used HD Cinema display the other day along with the ADC-DVI and DVI-Mini Display adapters. I had it hooked up and it was working perfectly for 3 days. Today my wife tried to connect her Macbook accidentally via the USB that is part of the ADC-DVI adapter which didn't work (why is that USB there anyway?). Then when she went to connect the external display back to my Macbook Pro it did not wake up after being connected. I have tried resetting the PRAM on the MBP and have disconnected and re-connected all connections but nothing will get the display working with the MBP anymore. When I connect and disconnect the mini-display plug into the MBP the MBP flashes the blue screen as it appears to be reacting, but that's it. I can't detect any display when I go into the display system preferences. Does anyone know how I can get the Apple Cinema display working again? Thanks for any help.

Ryan Nagy wrote:
Upon reflection, I think my issue is different. Probably should not have posted it here. As it turns out sometimes my display works, sometimes it does not. I think the power adapter has gone bad. A common occurrence here in Mexico where the power can fluctuate quite a bit. - Ryan
There are couple of long threads in the display section about problems with the power supplies on the 23" HD DVI. See this one for instance: https://discussions.apple.com/message/17981683#17981683
Mine one day just wouldn't turn on -- connected to an old G4 MDD and the Mini -- a bit of fiddling it would occasionally start up, sometimes not. Similar to what you described, the Macs would see it in System Profiler, but it just wouldn't turn on.
Based on that thread, I figured the problem was mostly likely the power supply. A local authorized repair place didn't have a spare for me to try, but the tech sniffed it and mentioned it the burnt electronics smell. LOL, I sniffed it and sniffed the power supply for my 20" DVI Cinema display -- indeed a weird smell.
Based on that thread, I decided to bite the bullet and buy a beefier 150" power supply for the 30" Cinema display, which Apple says in compatible with the 23". See: http://support.apple.com/kb/HT2803
I hooked it up, crossed my fingers, and it fired up right away. It's been working fine for about 3 months now. Cheaper than buying a new monitor.

IPAD2 since yesterday seems to have stopped allowing transfers of photos from anything other than another Apple product and comes up with the message2 itunes will no longer sync photos....which are not transferred from a Mac? Looks as if there is a prob

IPAD2 since yesterday seems to have stopped transfers of photos from non Mac equipment. I use dell with ITunes cloud facility.
Any ideas or are we to await Mac correcting the software?

Okay, can someone please give a useful answer? Thanks! I have been experiencing exactly the same problem for some time now, and it is very annoying. Furthermore, I would like to point out to Chris CA that there is absolutely nothing ambiguous about the original post.
So here is the deal. I used to be able to burn CDs with iTunes that played back fine on both my car and home stereo. After some update, and I am very sorry but I really do not remember which one, as I am just a user and not a programmer and just want something that works, which in the end Apple used to be all about, and therefore do not keep track of all the updates, CDs won't play back on my car stereo. Nothing else changed, still the same brand of CDs (even the same stack!), still the same car stereo, and still the same 2007 MBP. So by simple deduction I conclude it must be a software update. And I do not care what the exact cause is, I just want a fix!
I'd like to apologize for my tone in the above, but it is just a very annoying problem, even more so because it seems nothing is being done about it. Thanks for your answer in advance!

Old apple id no longer valid. new apple id can't log in or reset password

I just upgraded to an iphone 4s.
During the activation process, it said my old apple id was invalid because it wasn't an email address
I entered an email address but I have a couple of problems:
1. I have a couple of apps that need to be updated. When I go into the app store and click update all, it prompts me for the address for my old (non email) account password. The password is no longer valid.
2. I attempted to use iforgot to reset the password. I request the email to reset the password, and I get the email with the reset your password link. I click on the link to reset my password, choose a new password. I got a page that said the password change was successful. When I clicked the manage your apple id link and tried to log on with the new password, It said the apple id or password had been entered incorrectly.
I've tried to reset the password 4 times. Each time, the same result occurs, I get the email, successfully change the password, and the new password doesn't work.

I have a similar problem I am unable to access my iTunes account and the email password reset does not work
I have a load of apple apps and music I now own but cant access
Very fed up and disalusioned with apple .....
Anyone know how to fix this or access support from apple

Apple DVI to ADC Adapter with new mini

Has anyone have any experience using the Apple $99 DVI to ADC Adapter
with a New ( or old ) Mac Mini... I have a 22 inch Apple Cinema and
I love it... especially the non-glare screen.
The only complaints I've heard were the ADC Adapter size was large and it gets hot.
Anything else???? Does the sleep feature work?
Thanks in advance, Tom

Tom,
I currently use Apple's $99.00 DVI to ADC adapter with pre 2009 Mac Mini and Apple 17" ADC Studio monitor.
This setup in use for approx. 2 years now and to date no problems observed.
The unit's dimensions are approx. 4" x 4" x 1.5".
In use from 9:00 am this morning, in use as I type, I place my hand on unit now. The unit is warm to the touch. I can leave my hand on unit for 15-20-30 minutes. Certainly not HOT.
I have had sleep/wake problems with both mini and monitor in the past. I cant say that these issues are related to or caused by the dvi/adc adapter. I have no current sleep/wake problems.
UPS/System preference settings can also affect sleep/wake options.
Sleep feature works as the unit is also connected via usb to the machine.
Regards,
TrevorB

Apple Products no longer AirPrint with new routers

Similar Messages

Maybe you are looking for