Apple ProRes Timeline playback problem - Please Help
I am capturing 720p 60 video from a Panasonic Varicam using a Blackmagic HD Extreme card and using the Apple ProsRes (HQ) setting (Blackmagic HDTV 720p 59.94). We are editing the film in Apple ProRes 422 (HQ) 24fps. In my timeline all the clips are marked for render preview (green). When I play back sequences, some scenes seem to be stuttering or playing back two duplicate frames. Some scenes play fine. I've rendered the sequences and it corrects the problem with some scenes and causes the problem in others. There seems to be no consistency to what is happening. I would deeply appreciate any input on this problem.
Thanks.
The clips and the sequence don't match. We are capturing 60fps from the Varicam, but need to edit in 24fps for a film release. I don't mind rendering the sequences, but it sometimes fixes the problem and sometimes causes the problem. Thanks for the thought though.
Similar Messages
-
Timeline Rendering Problems - please help
I have a project already on a drive that came from a earlier version of FCP (I have 5.1)
Here is the problem...when editing, I have to consistantly render everytime I make a edit change.
The orginal item formats show the sequence presets to be 29.97 fps, frame size to (960x720) compressor DVDPRO HD 720p60
The camera was Panasonic P2 card set up.
Any ideas? ..have to render everytime I make an edit~!
Thank you in advance.
G5 Mac OS X (10.4.7) FCP 5.1my sequence settings are DVDPRO HD 720p60 and it still need to be rendered on the timeline.
-
my iphone 4 is acting like crap right i can't even restore it everytime i try to reboot it my iphone freezes at the apple logo it is ******* me off to the point where i just want to smash it how do i solve this problem please help?
Don't worry, just follow these steps to fix iPhone stuck on Apple logo
=> First of all Start your Computer and then connect with Internet connection, now Download the latest version of the iTunes application
=> Now install the iTunes application in your System and connect your Device with computer via Data cable
=> Now connect your Device with iTunes application and then Tab on summary option, see in the left side bar of iTunes
=> Now Select restore option from iTunes and then confirm the Restore Message for better results. After this unplug your Device and Restart it
I hope that will surely
Thank you... -
my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!
Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!
-
I want to buy an in-app purchase but i don`t remember my security questions and i cant access my recovery email either, what can i do? i have 100$ on my account and cant use it because of that problem, please help URGENT
If you have a rescue email address on your account then you can use that - follow steps 1 to 5 half-way down this page will give you a reset link on your account : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset : http://support.apple.com/kb/HT5699 -
I'm in trouble, my iPod Touch is giving 4th shock when recharge and the battery does not last any more. who knows or has a similar problem, please help me. Note: all this after I downloaded the new version OS5.
I would make an appointment at the Genius Bar of an Apple store because of the shock issue. I doubt it was caused by the update.
-
Step by step Apple ProRes 422 PROXY workflow, please.
Anyone could help me find a complete video or not, "Step by step Apple ProRes 422 PROXY workflow", please. I can´t find any.
I´ve never used Apple ProRes 422 PROXY and I´ve all the doubts on how to use it, final quality, etc, etc.
My original files are from a Canon 5DMII (H.264) and I usually transcode to Apple ProRes HQ with the EOS1-plug-in. The renderings are too long...during my editing ,-( Too long and my machine stops with the heat after several hours.
(I´ve my settings ok, between my files and my project, etc).
Is Apple ProRes 422 PROXY, a possible solution, at least during the editing process? Good quality and less time rendering?
What about final output? Can I have 1080p/24 pristine as I´ve now?
I´m editing with a MacBook Pro 15"/2.33 Ghz Intel Core 2 Duo/4GB SDRAM.
Thanks very very much. I´m a bit desperate 8~SProRes flavours:
"The Apple ProRes format comes in five versions: Apple ProRes 4444, Apple ProRes 422 (HQ), Apple ProRes 422, Apple ProRes 422 (LT), and Apple ProRes 422 (Proxy)."
from http://documentation.apple.com/en/finalcutpro/professionalformatsandworkflows/in dex.html#chapter=10%26section=2
Tom, you mean, Apple ProRes 422 or Apple ProRes 422 (LT).
Why? Because this specs?
(according to Apple)
"Apple ProRes 422
The Apple ProRes 422 codec provides the following:
Target data rate of approximately 145 Mbps (1920 x 1080 at 60i)
Higher quality than Apple ProRes 422 (LT)
Apple ProRes 422 (LT)
The Apple ProRes 422 (LT) codec provides the following:
Roughly 70 percent of the data rate of Apple ProRes 422 (thus, smaller file sizes than Apple ProRes 422)
Higher quality than Apple ProRes 422 (Proxy)"
Are enough (Mbps, colorspace, etc) to handle with files from 5DMII (1080p/24 my settings) without a big waste of resources; space, time, etc? In this the point to consider?
"If you use Proxy for ingest you'll have to batch ingest to higher resolution for output." - Tom.
I´m sorry but I know nothing about the use of Proxy files, so I don´t understand what you mean. That´s why I asked for an explanation step by step... ,-(
Additional question: is it possible (at all) to change the projects I´ve (several); all with Apple ProRes HQ to another ProRes version? Will I loose what? Effects, filters, renderings?
Thx. -
My iPad stop working suddenly i see black screen only pressing the home and sleep button dose not solve the problem please help ?
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
hello sir my iphone screen turns off after using 2-5 minutes what would be the problem please help me out
To make sure that this is not software related, set it back to factory settings, without using any backup data afterwards. Set up the rest of the personal settings manually and test the phone. If it still does not work, this is a hardware issue and the phone has to be serviced by Apple or an Authorized Apple Service Provider:
Use iTunes to restore your iOS device to factory settings - Apple Support
Find an Apple Authorized Service Provider
iPhone - Contact Support - Apple Support -
Hi .. my iPad 4 with iso 7.0.3 he is restarting himself ... How can i solve this problem please help me
Standard troubleshooting...
1. Try a Restart by pressing the sleep/lock button until you see the slider. Slide to power off. Restart by pressing the sleep/lock button until you see the Apple logo.
2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
3. Remove apps from Recently Used list...
- From any Home Screen, double tap the home button to bring up the Recents List
- Swipe up on the app preview card to remove it from the list
- Press the home button when done.
4. If still a problem restore with your backup.
5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
6. If still a problem, it's likely a hardware issue. -
My iphone 5 32 gb has an camera autofocus problem, please help me solve this
my iphone 5 32 gb has an camera autofocus problem, please help me solve this
Hi teejayfs,
Thanks for visiting Apple Support Communities.
If you've noticed unexpected behavior with your iPhone camera, start with these steps to isolate or resolve the issue:
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
You can find these steps here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Regards,
Jeremy -
hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(
Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I dont receive verification from apple to my email account. please help!
i dont receive verification from apple to my email account. please help!
BBLA wrote:
I'm at someone else's computer and I can not access my computer in Robbinsdale.
Can you please provide more details? Are you saying that you cannot get to www.comcast.net from your friend's PC? There is currently a problem with some Users getting to the homepage of Comcast. We do not have an ETR yet. Read below:
06-10-2010 02:10 PM
We are aware of customers experiencing timeouts, latency, error 500 and login issues with Comcast.net.
There is no ETR at this time.
George Lunski
Comcast Help Forums Administrator
[email protected]
Have the Comcast Help Forums provided you a resolution to your problem? Vote here.
Have a Question about the Forums or Comcast? Visit our expanding FAQs here. -
Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
Problem Please help me.....Let me know the area to look for it I am a DBA..
Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C
Maybe you are looking for
-
Can't scan to any of my folders using Safari
I am using a Macbook Air and a Lexmark x264dn. Usually I scan wirelessly usinf Safari and the scanners IP address. After I updated Safari yesterday I can't access any of my folders on my computer to scan to. Works fine using "system preferences" to s
-
APO- BI Datasource from Planning Area
Hi All, I need help with APO-BI datasource generated from Planning Area. In the Dev environment we had two clients: DCLNT020 (Holds APO part) DCLNT010 (Holds BI workbench). So a datasource was generated from the Planning area in DCLNT020 --> it was r
-
Dear all , Our Fiscal year is April to March . I am in MMPV transaction . presently following is available : Current period 09 2009 Previous period 08 2009 I have to Open the period for Jan 2010. In MMPV what period & fiscal year
-
Can I create a 15fps sequence in FC 6.06?
I've shot a stop motion video at 15fps but I can't find a way of creating a 15fps sequence to edit it on. All I can find are 24-30 fps. presets. I was thinking of using a 30fps seq. and importing the images with a duration of 2 frames but this will d
-
Does anyone have any information on when Training Classess will be offered? Thanks, BT