"Apple Q-Master file agent not found"

When I try to burn a Blu-Ray disk in FCP7 via the command 'Share', after a few seconds I get the message: "Apple Q-Master file agent not found' and the burn is aborted. It worked perfectly before, so I'm puzzled that is does not any more. What goes wrong? OS is Snow Leopard on a Mac Pro.

I checked the Q-Master pane in 'system preferences' but which setting of the very many available is meant to enable Q-Master? Sorry if this is a dumb question, but I'm only a sporadic user of FCP...

Similar Messages

After installation of Mavericks, I get the warning : Apple Qmaster File Agent not found. Any solutions?

Hello,
Everything was great running Mavericks in FCPX and seemingly Compressor... up until I hit the 'submit' button on a project. I found the following thread, which is related, but it doesn't mention Mavericks so I started a new one here. I'm guessing my problem has to do with Mavericks because I was able to export videos fine yesterday before the upgrade. I followed Russ' potential solution in that thread to no avail. The same problem happens whether I try to use the systems cluster or not. Here's the thread:
https://discussions.apple.com/message/23434754#23434754
After trying all of that, I decided to use FCS Remover to remove FCPX, Compressor and QMaster (like I've had to do in the past when something would stop working after an update). I then re-installed everything and opened my Compressor project back up for export. I was expecting it to go through at that point, but alas, the same dreaded warning message appears: "An internal error occurred: Apple Qmaster File Agent not found."
I'm stumped. Don't know what to do besides uninstalling all my pro apps, including QMaster, and reinstalling.
Any ideas?

I set QMaster Preferences for Compressor Services to "Share" = checked and "Managed" = Checked, then I set Instances to 4, it did not work, back to the original error "Qmaster file Agent not found".
Look at some of your information I noticed that in Qmaster Preference the "Advanced" - Network - Use Network Interface: "All Interfaces". So I changed that to "Built-in Ethernet 2" (NIC my cable is plugged into) and set "Enable Port Range: From 50,000 with number of ports 1000".
So, for the heck of it I tried setting Instances to 2 -- and it worked, look in Batch Monitor I see 5 segments, 1 audio and 4 video with 2 out of 4 video transcoding (each was assigned about a 2 min chunk of video). Progress -- ok, so now I set Instances to 3 and submit batch -- it's still working, I get 7 segments 6 video and 1 audio. Ok the big test, setting Instances to 4 and it still works!! 9 segments, 8 video and 1 audio, WoooHoo, its working!
Just to be sure I open up Activity monitor and all 4 of my CPUs were cranking at 95% utilization.
Also checked OS X firewall setting, they are set to most minimal. Checked my router also, 192.168.1.2 is the IP assigned to my MacPro and the router is set to DMZ that specific IP (meaning is basically open to any port).
But I think the KEY in my case was to change the "Use Network Interface" from "All Interfaces" to "Built-in Ethernet 2" and then Enable Port Range from 50,000.
On a side note, the progress bars in Batch Monitor and in Compressor are way off with the "Remaining" time estimates -- overall progress will suddenly jump -- it looks as if the remaining time isn't being divided by the number segments currently running or something?
Thank you for your assistance.
Rob.

Apple Qmaster File Agent not found

Anyone know how to fix this error?
Anyone know how to re-install the applications from App Store...
Very fustrating....

hi, just saw this whilst trawling this forum looking for something specific.. This is a bit heavy handed! lol.
simply
shut down qmaster etc via the Compressor/ apple qumater menu.
delete the ~/library/application support/Apple Qmaster folder
restart and set up compressor/ qmaster again .
A very detailed explanation of this procedure is here at: https://discussions.apple.com/message/17356372#17356372
sounds a bit heavy to remove the applications... yeah appzapper.app is cool though!
see above.
The file agent missing seems like a timing issue I think compounded by some corruption of he state information in compressor V4 in the ~/library/application support/Apple Qmaster folder. THere will erros logged in the /var/logs and also in the apple qmaster logs at ~/library/application support/Apple Qmaster/Logs.
worth a look.
w
Hong Kong

Master files are not found?

Hello,
I was using Aperture 3 on MacBook air with FileValut activated on my account.

Hello,
Yes, I have press a wrong key (essential cmd+S posts the message).
I was using Aperture 3.1.x on MacBook Air (previous generation) with FileValut activated on my account. The master files was always referenced from the library, the folder structure is following
/Users/username/Pictures/
   Aperture 3 Trial Library.aplibrary/
   Master.private/
     event1/
      event2/
   Master.public/
      cat1/
      cat2/
Recently, I got rid of MacBook Air and replace it with MacMini Server (OS Lion 10.7.2 build 11C74) and installed Aperture 3.2.2 from the Store. MacBook Air has been backed up with Time Machine to externat HDD and data is kept within encrupted bundle. I have failed to restore the bundle to new Mac (due to multiple reasons they are irrelevant here), I have mounted bundle and copied the Aperture library and whole content (been using multiple methong copy with Finder and with cp -R command).
When I open Aperture, it performs migration of my old library format into a new one. A whole data is restored except the links to master they are broken. Aperture thinks that master files a stored on the /Volume/username, howevere ApertureData.xml has correct links.
I know that I can mannualy re-link the masters but I have plenty of files & plenty of events. What would be the best way to re-link a whole lib in obe shot?
Thanks in advanced!

Getting authorization error message: Required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I have recently purchased this MacBook used and am trying to authorize it on the iTunes Store but even after uninstalling iTunes and re-installing it with a fresh copy I'm getting this error message: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed." And I have no idea of where or how to fix this issue. Any help or suggestions will be greatly appreciated. I even tried to deauthorize this computer and got the same error message. HELP!

I used Terminal to change the permissions on the folder in question. I followed the instructions in this article:
iTunes: Missing folder or incorrect permissions may prevent authorization
In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one. I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable. So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal. Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal). I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.) And it fixed the problem right away.
What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do. It didn't mention Terminal. What would really be helpful is if Apple included a link to a page like this in their error message.

I can't sync my macbook air with my ipad, problems with authorization... this keeps cropping up: "The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permi"

Help, cannot sync completely with my ipad, and i also cannot remove or delete shared photos which are clogging up my ipad 64GB memory! Some issue with this keeps croppin gup, so frustrating:
"The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed."
Not sure how we can correct his permissions problem, and whether authorising or deautorizing makes any difference, with more and more errors keep popping up, this got to be such after an update of the OS, can remember which!?
HELP!!!

follow this:
Launch iTunes
select iTunes Store from the menu on the left side.
sign in via the link on the top right area if you haven't done so already
click the link where you Apple ID email appears, enter your Apple ID password, click View Account, this will take you to a page displaying detailed information about your Apple ID account.
The last item under Apple ID summary should be Computer Authorisations, click Deauthorize All
now reauthorize any computers as needed when the system prompts you.
good luck.

I purchased lots of music yesterday from itunes and now i can't export to ipod because files are not found

I just purchased lots of music yesterday from itunes and amazon but now can't load onto ipod because files are not found.

elkelawdog wrote:
I think I had an old itunes id.
Either you did or did not. Do you not remember?
elkelawdog wrote:
But it never let me burn them to anything other than my Ipod.
Media is not burned to iDevices. Burning an iDevice would destroy it.
Why will iTunes not allow you to sync media to the iDevice? What happens when trying to sync media to an iDevice?
elkelawdog wrote:
I changed my password so now when I pull up my account there is no music.
Changed password to what?
Pull up what account?
What does this have to do with iTunes?
One does not pull up an account to access their media, they simply launch iTunes.
Changing a password has nothing to do with accessing the media on the computer when one launches iTunes.
What is the actual issue that is occurring?
elkelawdog wrote:
Can anyone tell me how to find my old account and then copy that music to my HTC One.?
iTunes has nothing to do with putting media on a non-Apple device.

The ipod "ipod touch" cannot be synched the required file is not found

When i try to sync my ipod touch it goes through the motions but when it tries to sync photo's i get the message about saying that the ipod can't be synched as the required file is not found. Earlier today a driver was automatically put on my windows 7 based laptop and it seemed to be from apple and was downloaded just as i plugged in my ipod touch ...... can anyone help please ?
I have an iphone and ipad2 and have synched them both today without any problems .

Deleting the iPod Photo Cache folder usually resolves the problem ofr its location see:
iTunes: Photo sync creates iPod Photo Cache folder
You may have more than one folder and you need to delete all of them.

Import iTunes Media Library, some files were not found problem

Hi guys,
I am trying to restore my music library info via importing from iTunes Media Library xml file I backed up. During import, iTunes gave me error message box saying that some files were not found and therefore won't get imported. After it's done, I checked the iTune and I noticed many of the music files did not get imported at all, even their locations are correct. Is it because iTunes stopped importing at the first entry that it found its location not existed and therefore skipped the rest all along? Even later ones might be valid. Is this the case?
Is there an easy way to find out what those entries are? So perhaps I could go and edit them directly in the xml file. The message box did not give much information
Any help would be really appreciated,
Thanks alot
Windows XP Pro
Windows XP Pro

Hi Chris
I have now experimented a little more and discovered that although Time Capsule (TC) is showing in Finder as a Shared Drive at laptop startup (and showing a status of a connected user, me) it is not actually 'mounted' in the true sense of the word i.e. the unmount/eject symbol is not showing next to it nor either of the drives connected to the TC. By clicking on either of the 2 drives (i.e. the TC 'Data' disk or the TC USB-connected drive) the status changes to show the dismount symbol on both the selected drive and the TC in the Finder side bar. Launching iTunes after this intervention works every time as per your advice. Not the Apple 'it just works' that I have come to expect and appreciate but at least I now understand how to make it work reliably..........many thanks and I hope Apple just makes it work sometine in the future

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll

On my HP laptop I get the following when booting up every time: "Apple Syn Notifier-Entry Ponint Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have to clear this everytime I boot up?

With that one, perhaps first try uninstalling and reinstalling your MobileMe control panel. Does that clear up the error?

How do I fix Camera Raw in CS6? I get "Could not complete request because the file was not found"

How do I fix my Camera Raw in Photoshop CS6? I tried to view an NEF file in CS6, but it said I had to update my Camera Raw to 7.3 (I had 7.0). I went online and the only thing I could find was to download 8.6 so I started with that, and installed something and it didn't work, and then it told me I couldn't download 8.6 because my OS X is not 10.7 ( I have 10.6.8). Now when I go back into photoshop it gives me this error "Could not complete request because the file was not found" and I cant open any jpegs in photoshop. I have tried shutting down my computer, deleting caches, and uninstalling photoshop and reinstalling it. Still no luck. Any idea how I can fix this?

Follow these instructions to manually update your ACR plug-in to ACR 8.3, which was the last version compatible with your OS:
http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html

File path not found

hi
i am using
parameters:p_file like rlgrap-filename,
to read the path for the file,
if the file is not found.
it should mention enter correct file path.
how do i handle this scenario.

You can check the SY-SUBRC returned form the UPLOAD FM.
Like:
DATA: L_FILE TYPE STRING.
L_FILE = P_LFILE.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_UPLOAD
    EXPORTING
      FILENAME            = L_FILE
      HAS_FIELD_SEPARATOR = 'X'
    CHANGING
      DATA_TAB            = IT_FILE
    EXCEPTIONS
      FILE_OPEN_ERROR     = 1
      FILE_READ_ERROR     = 2
      OTHERS              = 18.
if sy-subrc <> 0.       "<<
    message e398(00) with 'Error while opening a file'.
endif.
You can add the File Selection Pop up for the file on the presentation server.
Like:
PARAMETERS:       P_LFILE TYPE CHAR70 OBLIGATORY.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_LFILE.
PERFORM F4_LOCAL_FILE.
FORM F4_LOCAL_FILE .
DATA: LT_FILES TYPE FILETABLE,
        LW_FILES TYPE FILE_TABLE,
        RC       TYPE SY-SUBRC,
        L_TYPE   TYPE STRING.
L_TYPE = '*.txt'.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
    EXPORTING
      WINDOW_TITLE            = 'Raw data for RFBIBL00'
      DEFAULT_FILENAME        = L_TYPE
    CHANGING
      FILE_TABLE              = LT_FILES
      RC                      = RC
    EXCEPTIONS
      FILE_OPEN_DIALOG_FAILED = 1
      CNTL_ERROR              = 2
      ERROR_NO_GUI            = 3
      OTHERS                  = 4.
IF SY-SUBRC <> 0.
    MESSAGE E398(00) WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Get file selected
READ TABLE LT_FILES INDEX 1 INTO LW_FILES.
MOVE LW_FILES-FILENAME TO P_LFILE.
ENDFORM.                    " F4_local_file
Regards,
Naimesh Patel

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?

I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001

I keep getting this error message The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

I keep getting this messae when I try to share itune to my new mac The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

Doublechecking. In the course of your troubleshooting to date, have you worked through the instructions from the following document?
iTunes: Missing folder or incorrect permissions may prevent authorization

TS1459 The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

please help me how to authorize my computer as it always say The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed.

Many thanks. If you're on Mac OS, let's try the following document:
iTunes: Missing folder or incorrect permissions may prevent authorization

"Apple Q-Master file agent not found"

Similar Messages

Maybe you are looking for