Apple RAID Card after System Disk Failure: Volume visible but not mountable

Hi,
Im running a Mac Pro with 10.5.8. Server has a workgroup server. The Mac Pro is equipped with a Apple RAID Card running three 1TB SATA Drives and a SAS drive for the System. The three 1TB drives are used by a RAID5 to store the data the SAS drive was used for the system. After a power failure the SAS drive was dead and I installed a new drive and reinstalled the system with the DVDs that were in the box. After that the RAID5 is not mounted by the system anymore although I can sea it in the RAID Utility but not with its volume name but with the name R2V1.
What can I do to save the data on that RAID?
Thanks
Phil

It's tough to find info on your specific model but the Raid card listed in the Apple Store (http://store.apple.com/us/product/MB845Z/A?mco=MTY3ODQ5OTY) states you must use all SAS drives or all SATA drives with the card. Are you sure that the drive that died was a SAS drive?

Similar Messages

  • New drives help for APPLE RAID Card RAID Redo

    Hi,
    I've been happily using an Apple 3,1 MacPro with Apple RAID Card installed and connected to 4-500 GB Apple OEM drives. I'd like to redo my setup and replace the Apple drives with bigger drives. Someone said I could only use up to 2 TB drives - is this correct?
    Has anyone done this or anything like it using Seagate Drives that are not Apple OEM. Will that work OK or will the Apple RAID Card want to see Apple OEM drives? Apple sells 2TB Seagates, but they cost a lot compared to non-OEM drives, but will cheaper generic Seagate Barracuddas work OK in every way?
    Also, after accomplishing this upgrade, I'd like to upgrade this machine to the latest Lion and possibly even Moutain Lion System Software. Any issues perceived?
    To reiterate, I'd like to increase my storage to the max in my Early 2008 MacPro3,1 which has the Apple RAID Card utilizing a RAID5. This is spec'd at  "4 - 3.0 Gbps Serial ATA (SATA) controllers" but no mention is made of what the MAX Size drives that will be addressed by the RAID Card.
    Thanks, and so long for now, TOM

    I thought it was an oxymoron to be using Apple RAID card, and to be happy.
    It does not support drives larger than 2.2TB
    Seagate's just seem to be more trouble. Any enterprise drive should do.
    If you really really need RAID5 then maybe this card is useful, otherwise, no.,
    There is much less than 300MB/sec x 4 in bandwith, they are shared and not independent, but the total is more like 800MB/sec maximum. Less overhead and other factors comes in more like 700MB/sec total max. \
    SSDs have come a long way.
    Use a PCIe cards to manage 2 x SSDs of 500GB up to 1TB
    Use Disk Utility or SoftRAID 4 to manage 2-4 drive mirror or stripe arrays
    10.8.4 has a bug that interferes with using 3TB and larger drives, just introduced bug.
    This is the FIRST time there have been limits on drive size. And Apple RAID card. Seems the card is not getting updated firmware to address the need for larger drives. For those using SAS it is also a viable candidate.
    SSD on its own to hold the system. 4 x 2TB WD Black for data and media storage. 4 x SSDs for scratch and graphic catalogues and media... all depends what your goal and use and type of programs.
    No you do not need to use Apple's.
    I cannot vouche for or seen someone doing so but I would hope that WD RED series would be suitable.

  • Apple Raid Card in a Macpro production system running 10.4.11 Server

    We just recieved the Raid card for our main Intel Octo Core server After installing the card we realized said card was not recognized by 10.4.11 due to lack of drivers the drivers as stated by documentation should be part of 10.4.10 OR shipped with the card (we checked package time and again and nothing was there , are we having fun yet ??) to which we updated a long time ago since this is one of our production 10.4.10 Server is no longer an available install disk at the Apple store apple retailers etc and 10.5 Server is misery to install on our system upgrade path not working as of this time as in kernel panic crash on reboot. Apple does not put the drivers online for this card . I am looking for a kind soul that would have received the disk that should have shipped with the card that would be able to put it online so i can download the installer and recognize the card in 10.4.11 right now i am backing up my system and data to our xraids.
    Current Setup is :
    Raid Card in slot 1 fully charged battery (it has been way more than 72 hours).
    4x1TB HD in internal setup.
    1 Quad Channel FC Apple Fibre Channel Card
    tied to Fibrenetix Qbex 1 Xraid fully populated with 500 GB HDs.
    Total data size is about 500 GB total not including video feed that take about 1 TB and are already backed up to a networked drive. Sites while light occupy about 20 Gbs and WGM is about 300 users rich domains are in the 50 FDQN range . Upgrading manually to 10.5 on a clean install while a possibility would be a MAJOR pain where the sun rarely shines. 10.5.2 does not exist as a DVD yet so i would hope to avoid updating as of yet . Any help would be more than welcome.
    Thanking you for your time and attention and waiting to read from you soon ,
    Best Regards,

    I have installed 10.4 server (from 10.4.7 UB DVD) on top of 10.4.10 (?) "user" on a 4 core MacPro (it came with the RAID-card installed (don't remember if it came with 10.4.10 "user" or earlier version).
    You need to get at the "server.mpkg" install files from the 10.4.7 (10.4.8 or newer) server DVD and use that to install the server "bits".
    After all upgrades the server now reports (In Server Admin overview):
    System Version: Mac OS X 10.4.11 (Build 8S2169)
    Server Version: Mac OS X Server 10.4.11 (Build 8S2169)
    But the "user" version system that came with the 4-core machine reports something like:
    Mac OS X 10.4.11 (Build 8S3169) (notice the 3 in 8S3xxx).
    The driver for the RAID card is also on the user DVD but you need to do it like I did.
    As I understand it this is an Apple supported way to do it.
    This Server have been used a couple of months now.

  • Apple Raid Card: Raid-1 volume degrading

    Hello,
    I have 2 Raid-1 volumes running on a late 2009 mac pro with an Apple raid card. The second Raid volume has degraded now 3 times in the last 2 1/2 weeks. Raid utility is saying that the drive is damaged but when I shutdown, pull the drive out of the bay and push it back in and then restart it says that the drive is good. After assigning it as a spare the Volume rebuilds and lasts about a week until the same thing starts all over again. Perhaps the drive is somehow damaged but it seems more like a connection problem. If this is a familar issue to anyone and someone has a suggestion it would be greatly appreciated.

    Maybe you need to do a full surface scan for bad or weak failing sectors.
    Next time it drops out (or whenever you decide to remove it manually).
    Use Disk Utility to Initialize with Write Zeroes option. This takes several hours.
    If it completes without any error messages at all, it should then be good to use.
    If Bad Blocks are found, they will generally be spared out by this process, and the drive can be good to use for a while, but is likely to fail within 6 months. You should consider moving it to light-duty or occasional use, such as backups.
    Sometimes the Initialization will fail. If the drive is still under warranty, return it to the manufacturer for a refund/replacement. Original Apple drives have a one-year warranty, same as your Mac. Manufacturer warranties are often (but not always) 3 years or more.

  • Apple Raid Card panic on Mac Pro Early 2008 after installing SSD as an enhanced JBOD.

    I recently installed a SSD drive in my Mac Pro to replace an aging, original boot drive.  I have an Apple raid card with 3 other hds attached - all in an enhanced JBOD configuration.  After installing the SSD from OWC (3G Electra SATA II Compatible) everything appeared to work fine.  But after 36 hours I received a apple raid card kernel panic alert.  See below for diagnostic crash log.  OWC support says that their drive should work fine - now I am not so sure.  Anyone out there with suggestions/solutions is most welcomed.
    Anonymous UUID:       83ADF2C8-4D41-D2EE-58C2-0CC4344DB0B4
    Sun Jan  5 21:18:46 2014
    panic(cpu 3 caller 0xffffff7f98b1441e): "AppleRAIDCard controller panic"@/SourceCache/AppleHWRaidDriver/AppleHWRaidDriver-401/Driver/Driver/Apple RAIDCard.cp:1018
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8221563e30 : 0xffffff8017622f69
    0xffffff8221563eb0 : 0xffffff7f98b1441e
    0xffffff8221563ef0 : 0xffffff8017aada80
    0xffffff8221563f30 : 0xffffff8017aac522
    0xffffff8221563f80 : 0xffffff8017aac5f7
    0xffffff8221563fb0 : 0xffffff80176d6aa7
          Kernel Extensions in backtrace:
             com.apple.driver.AppleRAIDCard(401.0)[06045EA1-0404-36C3-9BE6-FE217DCD420C]@0xf fffff7f98b11000->0xffffff7f98b26fff
                dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.6.0)[657BB360-C3EA-3D01-934E-12DBD6 0BBBF5]@0xffffff7f97f80000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f97cba000
                dependency: com.apple.iokit.IOSCSIParallelFamily(3.0.0)[B6D80E76-647D-3BAE-823A-85871E9BAC7 2]@0xffffff7f97ca9000
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.6.0)[76253A22-A1DB-3BF4-A972-E6 94A37CD09A]@0xffffff7f97c78000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13B42
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000017400000
    Kernel text base: 0xffffff8017600000
    System model name: MacPro3,1 (Mac-F42C88C8)
    System uptime in nanoseconds: 91308918786320
    last loaded kext at 89490169308794: com.apple.filesystems.smbfs          2.0.0 (addr 0xffffff7f99714000, size 335872)
    last unloaded kext at 1120636252260: com.apple.driver.StorageLynx          3.3.5 (addr 0xffffff7f99714000, size 8192)
    loaded kexts:
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.iokit.CSRBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.driver.AppleUSBDisplays          360.8.14
    com.apple.driver.AppleHDA          2.5.3fc1
    com.apple.driver.AppleMCEDriver          1.1.9
    com.apple.kext.AMD5000Controller          1.1.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.XsanFilter          404
    com.apple.driver.Oxford_Semi          3.3.5
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleIntel8254XEthernet          3.1.3b1
    com.apple.driver.AppleRAIDCard          401
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleUSBUHCI          650.4.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.driver.DspFuncLib          2.5.3fc1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleHDAController          2.5.3fc1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOHDAFamily          2.5.3fc1
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleUSBHIDMouse          180.9
    com.apple.driver.AppleHIDMouse          180.9
    com.apple.driver.AppleUSBHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.5.1
    com.apple.iokit.IOFireWireSBP2          4.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOSCSIParallelFamily          3.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOATAFamily          2.5.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    System Profile:
    Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 18 GB, SMC 1.25f4
    Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
    Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353142363445363830304600
    Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353142363445363830304600
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Bluetooth: Version 4.2.0f6 12982, 3 services, 22 devices, 1 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: ATI Radeon HD 5870, Display Controller, Slot-1
    PCI Card: ATI Radeon HD 5870, ATY,LangurParent, Slot-1
    PCI Card: Apple RAID Card, RAID Controller, Slot-4
    Parallel ATA Device: PIONEER DVD-RW  DVR-112D
    USB Device: Hub
    USB Device: Keyboard Hub
    USB Device: Apple Optical USB Mouse
    USB Device: Apple Keyboard
    USB Device: XD-0405-U
    USB Device: Apple Cinema HD Display
    USB Device: USB2.0 Printer (Hi-speed)
    USB Device: Bluetooth USB Host Controller
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    FireWire Device: unknown_device, Iomage HDD, Up to 800 Mb/sec
    FireWire Device: unknown_device, Unknown
    Thunderbolt Bus:

    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Apple Raid Card, multiple drives and volumes

    Hallo,
    my xserve (early-2008) has an Apple Raid Card and two 300GB SAS-drives installed (mirroring).
    Is it possible to install a third disk (300GB SAS) and to use it as a separate Volume ?
    Disk 1 (300GB SAS) - Apple Raid Card mirroring: Volume 1 (300GB)
    Disk 2 (300GB SAS) - Apple Raid Card mirroring: Volume 1 (300GB)
    Disk 3 (300GB SAS) - Volume 2 (300GB)
    How do I have to set this up using Apple Raid Utility ?
    Thanks for your help !

    Is it possible to install a third disk (300GB SAS) and to use it as a separate Volume ?
    Yes. Of course.
    How do I have to set this up using Apple Raid Utility ?
    No. A third drive should just appear on the desktop. You only need RAID utility if you want to add that drive to an array, which doesn't sound like the case here.

  • Apple RAID Card, 4 SAS drives, 1 bootable large striped volume?

    I have an Apple RAID card and 4 SAS 250GB drives. I did the migration when I set up the RAID to give me 1 drive for my bootable OSX volume and the other 3 combined into unused unpartitioned space.
    But I want all 4 drives combined and striped for one large bootable OSX volume. I'd prefer not to have to reinstall OSX to do this.
    Do I need to buy a utility? Can I use Disk Utility or the Apple RAID Utility? I've done searches and read all the help and can't find an answer.

    Is it possible to install a third disk (300GB SAS) and to use it as a separate Volume ?
    Yes. Of course.
    How do I have to set this up using Apple Raid Utility ?
    No. A third drive should just appear on the desktop. You only need RAID utility if you want to add that drive to an array, which doesn't sound like the case here.

  • How can I force the Disk Cache on with Apple Raid Card?

    I have an apple raid card in my mac pro that has now had it's battery fail twice. I don't really want to keep putting money into this and would rather just force the disk cache on and hope my UPS works, I don't use this box for real work anymore anyway and it's all backed up.
    There used to be a force on button next to the Write Cahce Status section, but that seems to have gone away. Does anyone know how to force the cache on? Permanently if possible.

    OK, Command Line fun, use at your own risk:
    sudo raidutil modify controller -E

  • 2010 Mac Pro with Apple RAID card - "Drive carrier 00:03 removed"

    I've got a 2010 Mac Pro with the Apple RAID card and 4 internal identical Seagate ST32000641AS 2TB drives inside.
    I've never had a problem with the RAID card (either battery or in operation) except for one thing:
    Almost every time I shut the machine down (which I try to do as rarely as possible), it keeps losing Drive 3, the spare.
    (See RAID Utility event log snippet below.)
    [I wish I could understand why this Apple RAID card keeps losing the spare across power-cycles/reboots, but I digress.]
    So I just adopted it as the spare and it spawns the rebuild and many hours later, everything's fine again.
    ... until the last time I rebooted (Jan. 2nd).
    After the usual "I lost the spare" message upon login, it began the rebuild.
    But this time, about 11 1/2 hours later the rebuild stopped and RAID Utility reported "Drive carrier 00:03 removed".
    Bay 3 is now missing in the Controller view.
    I powered off the system last night, and left it off overnight.  Today I took all the drives out, blew the dust off and reseated them.
    Same thing.  Drive 3 is still missing, and now the rebuild task aborted.
    The drive bay location shouldn't matter, right?  Can I swap the Bay 3 drive with the Bay 4 drive?
    I figure one of two things would happen:
    (1) It will report Bay 3 as being there but Bay 4 as being missing, same situation as is now.  Meaning the problem is in the Bay 3 spare drive.
    (2) It will report Bay 3 as being missing (despite a 'good' drive being present) and Bay 4 will be the (unattached) spare, and the RAID set will be unviable.  Meaning the problem is with the drive bay itself, not whatever drive is plugged into it.
    If "Drive carrier removed" is trying to tell me the disk is bad, why do I not see any log messages about it?  I suppose a spare that never gets used could go bad from lack of use, but ... no messages at all?
    Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
    % sudo raidutil list raidsetinfo
                                         Total     Avail
    Raidsets      Type       Drives       Size      Size  Comments
    RS1           RAID 5     1,2,4      5.23TB    0.00MB  Rebuild: 0% complete            
    % sudo raidutil list driveinfo
    Drives  Raidset       Size      Flags
    Bay #1  RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
    Bay #2  RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
    Bay #4  RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
    Event log snippet:
    Saturday, January 11, 2014 8:15:19 AM PT
    Background task aborted: Task=Rebuild,Scope=DRVGRP,Group=RS1
    informational
    Friday, January 3, 2014 3:50:28 AM PT
    Drive carrier 00:03 removed
    informational
    Thursday, January 2, 2014 4:29:37 PM PT
    Marked drive in bay 3 as a global spare
    informational
    Thursday, January 2, 2014 4:29:28 PM PT
    Adopted drive in bay 3
    informational
    Thursday, January 2, 2014 4:28:34 PM PT
    Degraded RAID set RS1 - No spare available for rebuild
    critical
    Saturday, December 7, 2013 5:35:17 PM PT
    Marked drive in bay 3 as a global spare
    informational
    Saturday, December 7, 2013 5:35:08 PM PT
    Adopted drive in bay 3
    informational
    Saturday, December 7, 2013 5:34:11 PM PT
    The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
    warning
    Saturday, December 7, 2013 5:34:03 PM PT
    Degraded RAID set RS1 - No spare available for rebuild
    critical
    Friday, December 6, 2013 4:56:47 AM PT
    Battery finished conditioning
    informational
    Thursday, December 5, 2013 9:53:44 PM PT
    Battery started scheduled conditioning cycle (write cache disabled)
    informational
    Friday, September 6, 2013 10:53:11 PM PT
    Battery finished conditioning
    informational
    Friday, September 6, 2013 3:41:33 PM PT
    Battery started scheduled conditioning cycle (write cache disabled)
    informational
    Saturday, June 8, 2013 3:41:35 PM PT
    Battery finished conditioning
    informational
    Saturday, June 8, 2013 8:37:49 AM PT
    Battery started scheduled conditioning cycle (write cache disabled)
    informational
    Thursday, May 30, 2013 4:09:51 PM PT
    Marked drive in bay 3 as a global spare
    informational
    Thursday, May 30, 2013 4:09:42 PM PT
    Adopted drive in bay 3
    informational
    Thursday, May 30, 2013 4:08:59 PM PT
    Degraded RAID set RS1 - No spare available for rebuild
    critical
    Thursday, May 30, 2013 3:32:29 PM PT
    Degraded RAID set RS1
    warning

    Power Pig wrote:
    "Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
    % sudo raidutil list raidsetinfo
                                         Total     Avail
    Raidsets      Type       Drives       Size      Size  Comments
    RS1           RAID 5     1,2,4      5.23TB    0.00MB  Rebuild: 0% complete     
    I was talking about this.
    This looks like a RAID 5 setup without the parity to me. I would said it basically a RAID 0.
    Also you metioned "I guess that previous spare must really have gone 'bad', despite having never been used! "
    I wiped everything out, I selected the 3 disks and clicked on "Create RAID Set" with RAID5 selected and the "Use unassigned drives as spares" option checked.  The 3rd disk has always been marked as the spare ever since then.  You do not have a choice to create a "RAID5 setup without the parity".  If I wanted a RAID0 I would have chosen a RAID0!  raidutil now says
    % sudo raidutil list raidsetinfo
                                         Total     Avail
    Raidsets      Type       Drives       Size      Size  Comments
    RS1           RAID 5     1,2,3,4    5.23TB    0.00MB  No tasks running
    Every time the system would 'lose' Drive 3 on boot, I would just keep rebooting until it was 'found', and then manually re-assign the now-'floating' drive as the spare - and the RAID would rebuild.
    There was never a problem until the day that prompted this post - when it would not find Drive 3 no matter what I did.  I turned the Mac Pro off for several hours until the drives had all cooled down and it still did not find the drive.  I left the machine on but unmounted the degraded volume until I got the new replacement drive.
    I really don't understand what you are getting at. It's like you are trying to tell me I set it up as a 4-drive RAID5 with no parity(!) and that I was in grave danger because one of the disks was gone.  The actual RAID contents (spread across Drives 1, 2 and 4) were never in danger, unless a 2nd disk had failed while the spare was not seen by the Apple RAID card.  I wasn't too worried about that happening.

  • Repair Apple RAID card battery

    I have an Apple RAID card Mac Pro (Early 2009) RAID Card (top picture) with a bad battery. Unfortunately these batteries usually die after a few years and the replacement is not cheap. Looking on ebay, I can only get them from the US, but I live in Europe and it will cost me at least $150.
    From what I suspect reading the case, the battery is a 3.7 V Lithium battery, probably with built-in electronics that I can perhaps get for $5 from China. Any soldering work is not a problem. If I can replace the digitizer of an iPad mini, I can probably replace a battery too.
    The case of the battery looks like a regular aluminum box and the lit is probably just glued onto the battery. It's seems quite sturdy and would require some force to open. Has anyone ever opened an Apple Raid Card battery? I'm reluctant to apply much heat to open the case, though external heat might be ok. Any ideas? I'm aware of the risks.

    To summarise the 'end of days' issue with RAID5 the problem is that with the much bigger size of hard disks now available and being used e.g. 4TB or even bigger, it takes so long to rebuild a RAID5 array when replacing a faulty drive that the chance of another drive failing during the rebuild is becoming more and more likely. This is actually made worse by the fact that a RAID rebuild causes a lot of activity and therefore 'stress' on the hard disks in order to do the rebuild process. It can take more than 24 hours to do a complete RAID5 rebuild and during all that time you are vulnerable to a complete failure.
    RAID6 is a partial solution in that you start off with redundancy provided by two drives rather than RAID5 which has just one so RAID6 can survive two drive failures. It however only reduces the chances of having a complete RAID failure during a rebuild it does not eliminate it.
    Standard RAID5 or RAID6 therefore is being increasingly viewed as having reached a brick wall.
    For Enterprises i.e. those with lots of money you can just throw more drives at the problem e.g. RAID10. For the rest of us the hope is on new alternatives to RAID5. The one I am particularly excited about is BTRFS, this is a combination of both a RAID layer and a file-system layer, it is able to use file checksums from the file-system layer to spot and fix RAID issues and this is orders of magnitude more efficient than having to do a complete RAID resync/rebuild. This approach has two advantages, firstly it protects a problem described as 'bit rot' whereby a byte or block in a file can become corrupted, the checksums allow this to be detected and automatically fixed, the second is that it can do a rebuild of actual real data whereas a normal RAID rebuild rebuilds all blocks on a drive even empty ones.
    BTRFS is still pre-release especially its equivalent of RAID5 and RAID6 but it is getting closer. (RAID 0 and 1 for BTRFS are already considered ready for use.)
    ZFS is a similar 'new' file-system to BTRFS and at one point there was talk that Apple were going to switch to using ZFS but this no longer looks like happening. ZFS was a solution being developed and 'owned' by Sun Microsystems who are now part of Oracle. BTRFS is free open-source.
    I personally hope that Apple at some point implement BTRFS.
    There are some NAS manufacturers already implementing BTRFS however they are currently 'cheating'. NetGear for example use BTRFS on their current ReadyNAS OS 6.x models but rather than using a 'pure' BTRFS approach have a implemented BTRFS on top of a standard RAID5 system created by mdraid. They did this because as I mentioned above the official BTRFS RAID5/6 solution is not yet ready for real-world use. As a result you get some of the benefits of BTRFS like being more easily able to expand the size of a file-system, but you don't get the full checksum derived protection of BTRFS because it is not integrated to the RAID level. Thecus I believe have gone the same approach as NetGear. Synology and QNAP are still waiting for BTRFS to be 'finished' before implementing it.

  • Apple RAID Card help needed

    OK, new Mac Pro with Apple RAID card and three drives. Discovered RAID 5 is not setup as shipped.
    Thought I would need to run Disk Utility, told no it's RAID Admin, but found out it's a app called RAID Utility, so I set this up. Also found out I could "migrate" existing OS X Server volume on Drive 1 to the RAID 5 without reinstalling... but after migration, found one partition with the OS and another empty partition. Are there any tools to expand the existing Partition 1 to include space on Partition 2 with the OS, without destroying/reinstalling it? Thanks - Lewis

    You could open Disk Utility and click the RAID volume. Under partitions, see if you can make it 1 partition and retain data.

  • Mac Pro with Apple Raid Card - 1 drive OSX (JBOD) + 1 drive Vista?

    Can anyone walk me through what I'd need to do to set up an early 2008 model Mac Pro with the Apple Raid Card pre-installed and 2 500 gig drives, so that I can have OSX on the first drive and Vista on the second?
    I know it defeats the purpose of the raid card, but...
    What I've done so far is:
    1. Removed drive #2
    2. Install and using Raid Utility, add the first drive as a JBOD set/volume
    3. After install, shut down the machine
    4. Re-add drive #2
    5. Restart
    6. Use disk utility to add drive #2
    I tried to use bootcamp, but it only wants to put windows on the first drive - which won't work because it is RAID.

    Run Vista off an ATA interface in the 2nd optical drive. There is an SATA 2 ATA adapter.
    I think you can boot Vista off some RAID controllers, check out Highpoint RocketRAIDs. Should be able to configure the RR.
    Boot Vista off USB is a stretch.

  • What's the difference in Apple RAID card battery error messages?

    I have a Mac Pro with 2 quad core Intel Harpertown CPUs at 3.2GHz, and an Apple RAID card.  RAID Utility shows that the battery failed but in my research, nobody explains the difference between "Battery failed (code 0x#0 = 17)" (which is what I have) and "Battery failed (code 0x#0 = 18)" or ""Battery failed (other than expired)" (the latter two are what everybody talks about) and what the code numbers mean.  Speaking to a local AASP, they recommend that I just wait for a couple of days to see if it's doing the automatic 72-hour reconditioning operation since my Mac Pro is attached to a pretty hefty UPS (2200VA with nothing else attached) and power failures where I live are rare plus the write cache has been disabled so the RAID card is basically doing write-throughs at the moment.  But curiosity about the various, different error codes and messages is getting the better of me.  Thanks in advance.
    Also, what's worrying me (since RAID Utility is so vague) is this entry I found under "Hardware RAID" in System Profiler:
      Status:
      Charging:          No
      Conditioning:          No
      Connected:          Yes
      Discharging:          No
      Sufficient Charge:          No

    As an update to this, once I replaced the RAID card battery (which was an absolute nightmare--the writer of the instructions at Apple obviously had never done it for real nor seen it done since they omit a lot of important things), the problem went away.  But I'm still intrigued about what the error codes mean.

  • Suggestions for removing Apple RAID Card?

    After a year of dealing with problematic Apple RAID cards, and replacement batteries – we are ready to move on, without the RAID card.
    We have not yet used it as a RAID – all drives operate discretely, non-RAIDed.
    We propose to remove the RAID card to eliminate that point of common failure. Has anyone else faced this, done this? Any suggestions, warnings?
    TIA for your kind attention.

    Hi Michael,
    What issues are you having? I had an issue with a faulty battery on a new xserve but once that was swapped out it's been as good as gold. If the drives you have installed have not been raided then you could buy the SATA backplane for the Xserve and swap it out.. Takes about 10 mins to do.
    All the best
    Beatle

  • MacPro2009-Apple Raid Card-2.2TB limit

    Hello,
    I have a MacPro (early 2009) with an Apple Raid Card. Lion 10.7.4
    I just bought a 4 Tb Sata hard drive and there is no way to make it work on the Apple Raid Card. When it mount , it only show a capacity of 2,2 TB and Apple disk Utility is of no utility with it on the Raid Card.
    So I managed to hook it in the Optical Drive bay and I have now a 4 TB volume available for Network backup.
    Can you confirm the limit on the Apple raid card
    Version Matériel:          2,00
      Version du programme interne:          E-1.3.2.0
    Thanks,
    Marc LE BRET

    I have this same issue with a mid 2010 MacPro Server running 10.8.2/OS X Server (10.8) and the Apple RAID Card with 3 - 1TB drives and an added 4TB drive (in Bay 4) that is only being seen with the 2.2TB limit.  I even initialized it and tested it a bit with my MacPro1,1 and a NewerTech toaster on eSata.  Very nice to see a workaround with the optical bay... thank you for that suggestion!  I was going to go to another enclosure or hard drive "toaster" / dock that allows 4TB drives and use eSata or FW800 as a connection... the 2nd optical drive bay sounds great and will give it a try. 
    The only thing I can figure from all this and talking to Tier 2 AppleCare is that the RAID card is only 32 Bit addressing O.o  ... which seems crazy but makes the most sense.  They will more than likely respond with "The drive is unsupported, since it isnt an "Apple" HD."

Maybe you are looking for