Apple raid card enigma

I have two Mac pros, on both I've installed the Apple raid card. Recently I've noticed that my 2008 Mac Pro does not react to based commands anymore. For example if I try to boot the computer on single user mode it doesn't react, the same goes to any other basic combined like P. RAM reset or target disk mode or even booting from a CD by pressing the C key on boot.
Once I've discovered that, I went and checked it on my 2007 Mac Pro. To my surprise the same thing occurs! It looks to me there is some sort of a firmware issue involved with the Apple raid card, I've called Apple support and they were in the dark as much as I am, at least the first two levels of support I never got to an engineer .
I was wondering if there is anyone else experiencing the same issues that I have and if there is anyone who has a work around for a these issue?

I have had issues with both a 2007 and 2008 mac pro booting to commands, when i was using a dell key board. But when i plugged the apple keyboard in they both worked. I know that this is probably not your problem but i figured on the slight chance it is there you go.

Similar Messages

  • Apple Raid Card panic on Mac Pro Early 2008 after installing SSD as an enhanced JBOD.

    I recently installed a SSD drive in my Mac Pro to replace an aging, original boot drive.  I have an Apple raid card with 3 other hds attached - all in an enhanced JBOD configuration.  After installing the SSD from OWC (3G Electra SATA II Compatible) everything appeared to work fine.  But after 36 hours I received a apple raid card kernel panic alert.  See below for diagnostic crash log.  OWC support says that their drive should work fine - now I am not so sure.  Anyone out there with suggestions/solutions is most welcomed.
    Anonymous UUID:       83ADF2C8-4D41-D2EE-58C2-0CC4344DB0B4
    Sun Jan  5 21:18:46 2014
    panic(cpu 3 caller 0xffffff7f98b1441e): "AppleRAIDCard controller panic"@/SourceCache/AppleHWRaidDriver/AppleHWRaidDriver-401/Driver/Driver/Apple RAIDCard.cp:1018
    Backtrace (CPU 3), Frame : Return Address
    0xffffff8221563e30 : 0xffffff8017622f69
    0xffffff8221563eb0 : 0xffffff7f98b1441e
    0xffffff8221563ef0 : 0xffffff8017aada80
    0xffffff8221563f30 : 0xffffff8017aac522
    0xffffff8221563f80 : 0xffffff8017aac5f7
    0xffffff8221563fb0 : 0xffffff80176d6aa7
          Kernel Extensions in backtrace:
             com.apple.driver.AppleRAIDCard(401.0)[06045EA1-0404-36C3-9BE6-FE217DCD420C]@0xf fffff7f98b11000->0xffffff7f98b26fff
                dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.6.0)[657BB360-C3EA-3D01-934E-12DBD6 0BBBF5]@0xffffff7f97f80000
                dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7f97cba000
                dependency: com.apple.iokit.IOSCSIParallelFamily(3.0.0)[B6D80E76-647D-3BAE-823A-85871E9BAC7 2]@0xffffff7f97ca9000
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.6.0)[76253A22-A1DB-3BF4-A972-E6 94A37CD09A]@0xffffff7f97c78000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    13B42
    Kernel version:
    Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
    Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
    Kernel slide:     0x0000000017400000
    Kernel text base: 0xffffff8017600000
    System model name: MacPro3,1 (Mac-F42C88C8)
    System uptime in nanoseconds: 91308918786320
    last loaded kext at 89490169308794: com.apple.filesystems.smbfs          2.0.0 (addr 0xffffff7f99714000, size 335872)
    last unloaded kext at 1120636252260: com.apple.driver.StorageLynx          3.3.5 (addr 0xffffff7f99714000, size 8192)
    loaded kexts:
    com.apple.filesystems.smbfs          2.0.0
    com.apple.driver.AudioAUUC          1.60
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleBluetoothMultitouch          80.14
    com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
    com.apple.driver.AppleUpstreamUserClient          3.5.13
    com.apple.driver.AppleMCCSControl          1.1.12
    com.apple.kext.AMDFramebuffer          1.1.4
    com.apple.iokit.CSRBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.AMDRadeonX3000          1.1.4
    com.apple.driver.AppleUSBDisplays          360.8.14
    com.apple.driver.AppleHDA          2.5.3fc1
    com.apple.driver.AppleMCEDriver          1.1.9
    com.apple.kext.AMD5000Controller          1.1.4
    com.apple.driver.AppleLPC          1.7.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleHWAccess          1
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.XsanFilter          404
    com.apple.driver.Oxford_Semi          3.3.5
    com.apple.iokit.SCSITaskUserClient          3.6.0
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          35
    com.apple.driver.AppleIntel8254XEthernet          3.1.3b1
    com.apple.driver.AppleRAIDCard          401
    com.apple.driver.AppleUSBHub          650.4.4
    com.apple.driver.AppleAHCIPort          2.9.5
    com.apple.driver.AppleIntelPIIXATA          2.5.1
    com.apple.driver.AppleFWOHCI          4.9.9
    com.apple.driver.AppleUSBEHCI          650.4.1
    com.apple.driver.AppleUSBUHCI          650.4.0
    com.apple.driver.AppleACPIButtons          2.0
    com.apple.driver.AppleRTC          2.0
    com.apple.driver.AppleHPET          1.8
    com.apple.driver.AppleSMBIOS          2.0
    com.apple.driver.AppleACPIEC          2.0
    com.apple.driver.AppleAPIC          1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
    com.apple.nke.applicationfirewall          153
    com.apple.security.quarantine          3
    com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
    com.apple.kext.triggers          1.0
    com.apple.driver.IOBluetoothHIDDriver          4.2.0f6
    com.apple.driver.AppleMultitouchDriver          245.13
    com.apple.iokit.IOSerialFamily          10.0.7
    com.apple.driver.AppleSMBusController          1.0.11d1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
    com.apple.iokit.IOAcceleratorFamily          98.7.1
    com.apple.driver.DspFuncLib          2.5.3fc1
    com.apple.vecLib.kext          1.0.0
    com.apple.iokit.IOAudioFamily          1.9.4fc11
    com.apple.kext.OSvKernDSPLib          1.14
    com.apple.iokit.IONDRVSupport          2.3.6
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.kext.AMDSupport          1.1.4
    com.apple.AppleGraphicsDeviceControl          3.4.12
    com.apple.iokit.IOSurface          91
    com.apple.iokit.IOBluetoothFamily          4.2.0f6
    com.apple.driver.AppleHDAController          2.5.3fc1
    com.apple.iokit.IOGraphicsFamily          2.3.6
    com.apple.iokit.IOHDAFamily          2.5.3fc1
    com.apple.driver.AppleSMC          3.1.6d1
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.IOPlatformPluginFamily          5.5.1d27
    com.apple.driver.AppleUSBHIDMouse          180.9
    com.apple.driver.AppleHIDMouse          180.9
    com.apple.driver.AppleUSBHIDKeyboard          170.15
    com.apple.driver.AppleHIDKeyboard          170.15
    com.apple.iokit.IOUSBHIDDriver          650.4.4
    com.apple.driver.AppleUSBMergeNub          650.4.0
    com.apple.driver.AppleUSBComposite          650.4.0
    com.apple.iokit.IOFireWireSerialBusProtocolTransport          2.5.1
    com.apple.iokit.IOFireWireSBP2          4.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.6.0
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOATAPIProtocolTransport          3.5.0
    com.apple.iokit.IONetworkingFamily          3.2
    com.apple.iokit.IOSCSIParallelFamily          3.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.6.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
    com.apple.iokit.IOUSBUserClient          650.4.4
    com.apple.iokit.IOAHCIFamily          2.6.0
    com.apple.iokit.IOATAFamily          2.5.2
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOUSBFamily          650.4.4
    com.apple.driver.AppleEFINVRAM          2.0
    com.apple.iokit.IOHIDFamily          2.0.0
    com.apple.driver.AppleEFIRuntime          2.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          278.10
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.AppleKeyStore          2
    com.apple.driver.DiskImages          371.1
    com.apple.iokit.IOStorageFamily          1.9
    com.apple.iokit.IOReportFamily          21
    com.apple.driver.AppleFDEKeyStore          28.30
    com.apple.driver.AppleACPIPlatform          2.0
    com.apple.iokit.IOPCIFamily          2.8
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    com.apple.kec.pthread          1
    System Profile:
    Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 18 GB, SMC 1.25f4
    Graphics: ATI Radeon HD 5870, ATI Radeon HD 5870, PCIe, 1024 MB
    Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x48594D5035313241373243503844332D5335
    Memory Module: DIMM Riser B/DIMM 3, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353142363445363830304600
    Memory Module: DIMM Riser B/DIMM 4, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353142363445363830304600
    Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Bluetooth: Version 4.2.0f6 12982, 3 services, 22 devices, 1 incoming serial ports
    Network Service: Ethernet 1, Ethernet, en0
    PCI Card: ATI Radeon HD 5870, Display Controller, Slot-1
    PCI Card: ATI Radeon HD 5870, ATY,LangurParent, Slot-1
    PCI Card: Apple RAID Card, RAID Controller, Slot-4
    Parallel ATA Device: PIONEER DVD-RW  DVR-112D
    USB Device: Hub
    USB Device: Keyboard Hub
    USB Device: Apple Optical USB Mouse
    USB Device: Apple Keyboard
    USB Device: XD-0405-U
    USB Device: Apple Cinema HD Display
    USB Device: USB2.0 Printer (Hi-speed)
    USB Device: Bluetooth USB Host Controller
    FireWire Device: built-in_hub, Up to 800 Mb/sec
    FireWire Device: unknown_device, Iomage HDD, Up to 800 Mb/sec
    FireWire Device: unknown_device, Unknown
    Thunderbolt Bus:

    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Windows and Mac Pro w/ Apple RAID card

    It happened i have a need to run Windows natively on Mac Pro with Apple RAID card installed.
    I know there is no Windows driver for that card, but i had a hope to bypass RAID card via connecting of internal SATA drive directly to iPass(SSF-8087) connector of Mac Pro's motherboard and using of that drive for Windows.
    So, i've connected SATA drive this way and it works fine with OS X.
    But i can't even try it with Windows because Mac Pro doesn't boot up from Windows installation CD if Apple RAID card installed
    Empty black text console is all that i've got after selecting of Windows installation CD in EFI boot menu.
    I need a suggestion how to bypass my problem, or generally speaking, how to install Windows onto Mac Pro with Apple RAID card.

    I've tried that.
    Installation and booting of WinXP passed OK if RAID card removed.
    But i've got black screen again trying to boot WinXP after RAID card re-installed.

  • How do I determine what needs attention on my Apple RAID card?

    Every time I turn on the computer, I get a message that says," The Apple RAID Card installed in your system requires your attention."
    This is what I have: RAID 065-7214 Mac Pro RAID Card
    Why do I keep getting this message? I am not sure what needs to be done to rectify any error. If there is no error and the warning is just due to battery charging, then I would like the warning to stop appearing--or do I just have to continuously click "Ignore"? Any insight into this?
    When I open RAID Utility it says: RAID set R0-1 has been mounted with indeterminate data loss. ( Is this just due to improper shutdown?)
    Also: Controller reports RAID system 72-hour battery reserve unavailable-System is configured to run without battery.
    Message was edited by: Darlyne

    I have had the exact same error message. When you open Raid Utility (that is where you can read what "attention" is needed you will see under the "Status" section what happened, and under the "Tasks" you will see the raid card "initializing" your RAID set. The first time I saw this I freaked, thinking that my drives were being reformatted, and my data would be lost. This is not the case. If you look down on the left side, you will (hopefully) see green lights next to your drives. The initialization seems to be a verification of the raid structure -- basically checking to make sure everything is redundant.
    So, back to the original question: it seems from my poking around that you SHOULD NEVER TURN OFF your Mac Pro with an Apple Raid Card installed. The firmware is not able to spin down the drives correctly, so when you turn your machine back on, you get the error message we have been discussing.
    I would recommend you get a good battery backup (UPS, like an APC) and just power off your monitor when not using your machine. I did not see this in the documentation, I am not 100% sure, but this is what I will be doing. In my case it takes many hours for the Raid Util to initialize my Raid again.
    Hope this helps.
    Theo

  • What's the difference in Apple RAID card battery error messages?

    I have a Mac Pro with 2 quad core Intel Harpertown CPUs at 3.2GHz, and an Apple RAID card.  RAID Utility shows that the battery failed but in my research, nobody explains the difference between "Battery failed (code 0x#0 = 17)" (which is what I have) and "Battery failed (code 0x#0 = 18)" or ""Battery failed (other than expired)" (the latter two are what everybody talks about) and what the code numbers mean.  Speaking to a local AASP, they recommend that I just wait for a couple of days to see if it's doing the automatic 72-hour reconditioning operation since my Mac Pro is attached to a pretty hefty UPS (2200VA with nothing else attached) and power failures where I live are rare plus the write cache has been disabled so the RAID card is basically doing write-throughs at the moment.  But curiosity about the various, different error codes and messages is getting the better of me.  Thanks in advance.
    Also, what's worrying me (since RAID Utility is so vague) is this entry I found under "Hardware RAID" in System Profiler:
      Status:
      Charging:          No
      Conditioning:          No
      Connected:          Yes
      Discharging:          No
      Sufficient Charge:          No

    As an update to this, once I replaced the RAID card battery (which was an absolute nightmare--the writer of the instructions at Apple obviously had never done it for real nor seen it done since they omit a lot of important things), the problem went away.  But I'm still intrigued about what the error codes mean.

  • Apple RAID card II - will it work in single CPU Mac Pro 4,1?

    Will the Apple RAID card work in a quad core 2009 Mac Pro?  I'm refurbing a used Mac Pro I got at a great price and just wondering if I can put in this card (which was "thrown in" with a used 8 core I also bought) with the idea of doing a RAID 10 to experiment with getting top disk read/write performance. I know most do not like the Apple RAID card II but it might be a cost effective way to max out performance on the single CPU, quad core Mac Pro. Ultimately I want to falsh the firmware to 5,1 and upgrade the CPU to a W3690 hex core. I plan to use this box for photography, light video and possibly sound editing. If my plan will result in high benchmarks and provide some fault tolerance I'm comfortable with using the card. I have heard from other users that the new card is much better than the first version and that it actually works pretty well. Any insights appreciated.

    Heck!
    Im about to win an eBay auction for a blue Apple RAID card together with a pair or SAS 300gb cheetah 15.5k discs for 75 bucks *happy*. Would have been healthy fast upgrade for small investment I thought?!
    Guess it probably would have been if the thing worked!?
    Why doesnt it work? iPass cable or something like that?
    Suppose I still want to go the SAS route with those drives for performance. Any other cards not too expensive that will enable SAS in the Pro?
    I use my MP 4,1 as a photo edit workstation but I also keep it on 24/7 for home server, web server, nas, backup etc. So i like to use items that are made for round the clock usage.
    Or i just get inexpensive SATA drives and SoftRAID them. So RAID 0+1 is no problem in software RAID?
    Thank you guy for quick informed response

  • Suggestions for removing Apple RAID Card?

    After a year of dealing with problematic Apple RAID cards, and replacement batteries – we are ready to move on, without the RAID card.
    We have not yet used it as a RAID – all drives operate discretely, non-RAIDed.
    We propose to remove the RAID card to eliminate that point of common failure. Has anyone else faced this, done this? Any suggestions, warnings?
    TIA for your kind attention.

    Hi Michael,
    What issues are you having? I had an issue with a faulty battery on a new xserve but once that was swapped out it's been as good as gold. If the drives you have installed have not been raided then you could buy the SATA backplane for the Xserve and swap it out.. Takes about 10 mins to do.
    All the best
    Beatle

  • Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

    Is there a firmware update for the Apple RAID Card [early 2009 Xserve] that will take it beyond the E-1.3.2.0 version and allow it to see 4TB drives?

    I have a few of these RAID cards in a couple servers, and then I have an earlier version of the RAID card in a few different servers.
    The earlier servers are running non-apple 1.5 TB drives. It will be interesting to learn if this firmware update will indeed allow me to boost the capacity by installing non-apple drives, as the firmware previously has not.
    Ohh I'm excited to update and try! This will greatly help out if it does!

  • Installing Apple RAID Card on original Mac Pro 1.1

    After months of waiting, I finally received my ordered Apple RAID Card suggested by Apple Italia per upgrading my Mac Pro station to handle HD editing. OK. Great. the problem is that the inside of my Mac Pro does not resemble the illustrations in the manual and I can't find any instructions for mounting the card (it's the right one, on this site I found it and ordered the right one, the blue card) but I DON'T have the PCI Slider illustrated in the manual. Since you clame that I CAN install this RAID card (otherwise I wouldn't have bought it!) but I don't know if the absence of ANY sliding element in the place of the PCI Slider mentioned means that I have to connect wires, change the inside, go to an Apple Authorized Dealer (where I bought the thing!)? Can anyone help me?

    The instructions can be found here for the first generation Mac Pro:
    http://manuals.info.apple.com/enUS/MacPro_RAIDCardInstallation.pdf.
    Not sure what you mean by 'PCI Slider'. If you can reference the step this component is mention in the manual it might help.

  • 2010 Mac Pro with Apple RAID card - "Drive carrier 00:03 removed"

    I've got a 2010 Mac Pro with the Apple RAID card and 4 internal identical Seagate ST32000641AS 2TB drives inside.
    I've never had a problem with the RAID card (either battery or in operation) except for one thing:
    Almost every time I shut the machine down (which I try to do as rarely as possible), it keeps losing Drive 3, the spare.
    (See RAID Utility event log snippet below.)
    [I wish I could understand why this Apple RAID card keeps losing the spare across power-cycles/reboots, but I digress.]
    So I just adopted it as the spare and it spawns the rebuild and many hours later, everything's fine again.
    ... until the last time I rebooted (Jan. 2nd).
    After the usual "I lost the spare" message upon login, it began the rebuild.
    But this time, about 11 1/2 hours later the rebuild stopped and RAID Utility reported "Drive carrier 00:03 removed".
    Bay 3 is now missing in the Controller view.
    I powered off the system last night, and left it off overnight.  Today I took all the drives out, blew the dust off and reseated them.
    Same thing.  Drive 3 is still missing, and now the rebuild task aborted.
    The drive bay location shouldn't matter, right?  Can I swap the Bay 3 drive with the Bay 4 drive?
    I figure one of two things would happen:
    (1) It will report Bay 3 as being there but Bay 4 as being missing, same situation as is now.  Meaning the problem is in the Bay 3 spare drive.
    (2) It will report Bay 3 as being missing (despite a 'good' drive being present) and Bay 4 will be the (unattached) spare, and the RAID set will be unviable.  Meaning the problem is with the drive bay itself, not whatever drive is plugged into it.
    If "Drive carrier removed" is trying to tell me the disk is bad, why do I not see any log messages about it?  I suppose a spare that never gets used could go bad from lack of use, but ... no messages at all?
    Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
    % sudo raidutil list raidsetinfo
                                         Total     Avail
    Raidsets      Type       Drives       Size      Size  Comments
    RS1           RAID 5     1,2,4      5.23TB    0.00MB  Rebuild: 0% complete            
    % sudo raidutil list driveinfo
    Drives  Raidset       Size      Flags
    Bay #1  RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
    Bay #2  RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
    Bay #4  RS1             2.00TB   IsMemberOfRAIDSet:RS1 IsReliable
    Event log snippet:
    Saturday, January 11, 2014 8:15:19 AM PT
    Background task aborted: Task=Rebuild,Scope=DRVGRP,Group=RS1
    informational
    Friday, January 3, 2014 3:50:28 AM PT
    Drive carrier 00:03 removed
    informational
    Thursday, January 2, 2014 4:29:37 PM PT
    Marked drive in bay 3 as a global spare
    informational
    Thursday, January 2, 2014 4:29:28 PM PT
    Adopted drive in bay 3
    informational
    Thursday, January 2, 2014 4:28:34 PM PT
    Degraded RAID set RS1 - No spare available for rebuild
    critical
    Saturday, December 7, 2013 5:35:17 PM PT
    Marked drive in bay 3 as a global spare
    informational
    Saturday, December 7, 2013 5:35:08 PM PT
    Adopted drive in bay 3
    informational
    Saturday, December 7, 2013 5:34:11 PM PT
    The "RedundancyScrub" command could not be executed. (Invalid request or invalid parameter in the request.)
    warning
    Saturday, December 7, 2013 5:34:03 PM PT
    Degraded RAID set RS1 - No spare available for rebuild
    critical
    Friday, December 6, 2013 4:56:47 AM PT
    Battery finished conditioning
    informational
    Thursday, December 5, 2013 9:53:44 PM PT
    Battery started scheduled conditioning cycle (write cache disabled)
    informational
    Friday, September 6, 2013 10:53:11 PM PT
    Battery finished conditioning
    informational
    Friday, September 6, 2013 3:41:33 PM PT
    Battery started scheduled conditioning cycle (write cache disabled)
    informational
    Saturday, June 8, 2013 3:41:35 PM PT
    Battery finished conditioning
    informational
    Saturday, June 8, 2013 8:37:49 AM PT
    Battery started scheduled conditioning cycle (write cache disabled)
    informational
    Thursday, May 30, 2013 4:09:51 PM PT
    Marked drive in bay 3 as a global spare
    informational
    Thursday, May 30, 2013 4:09:42 PM PT
    Adopted drive in bay 3
    informational
    Thursday, May 30, 2013 4:08:59 PM PT
    Degraded RAID set RS1 - No spare available for rebuild
    critical
    Thursday, May 30, 2013 3:32:29 PM PT
    Degraded RAID set RS1
    warning

    Power Pig wrote:
    "Hesitant to plunk down $160 on a new spare disk if the present one isn't actually dead ...
    % sudo raidutil list raidsetinfo
                                         Total     Avail
    Raidsets      Type       Drives       Size      Size  Comments
    RS1           RAID 5     1,2,4      5.23TB    0.00MB  Rebuild: 0% complete     
    I was talking about this.
    This looks like a RAID 5 setup without the parity to me. I would said it basically a RAID 0.
    Also you metioned "I guess that previous spare must really have gone 'bad', despite having never been used! "
    I wiped everything out, I selected the 3 disks and clicked on "Create RAID Set" with RAID5 selected and the "Use unassigned drives as spares" option checked.  The 3rd disk has always been marked as the spare ever since then.  You do not have a choice to create a "RAID5 setup without the parity".  If I wanted a RAID0 I would have chosen a RAID0!  raidutil now says
    % sudo raidutil list raidsetinfo
                                         Total     Avail
    Raidsets      Type       Drives       Size      Size  Comments
    RS1           RAID 5     1,2,3,4    5.23TB    0.00MB  No tasks running
    Every time the system would 'lose' Drive 3 on boot, I would just keep rebooting until it was 'found', and then manually re-assign the now-'floating' drive as the spare - and the RAID would rebuild.
    There was never a problem until the day that prompted this post - when it would not find Drive 3 no matter what I did.  I turned the Mac Pro off for several hours until the drives had all cooled down and it still did not find the drive.  I left the machine on but unmounted the degraded volume until I got the new replacement drive.
    I really don't understand what you are getting at. It's like you are trying to tell me I set it up as a 4-drive RAID5 with no parity(!) and that I was in grave danger because one of the disks was gone.  The actual RAID contents (spread across Drives 1, 2 and 4) were never in danger, unless a 2nd disk had failed while the spare was not seen by the Apple RAID card.  I wasn't too worried about that happening.

  • How can I force the Disk Cache on with Apple Raid Card?

    I have an apple raid card in my mac pro that has now had it's battery fail twice. I don't really want to keep putting money into this and would rather just force the disk cache on and hope my UPS works, I don't use this box for real work anymore anyway and it's all backed up.
    There used to be a force on button next to the Write Cahce Status section, but that seems to have gone away. Does anyone know how to force the cache on? Permanently if possible.

    OK, Command Line fun, use at your own risk:
    sudo raidutil modify controller -E

  • Installing, a Apple Raid Card

    Hi All
    I have got my hands on a Apple Raid card (Free), I have checked it all out and it is the correct model for my Mac Pro (early 2009 i believe). now came the fun bit
    I opend the MP up and installed the card as shown in the instructions (not to hard as im tech savvy) turned it all on and nothing, no apple logo, just the white screen and the little apple bing startup sound.
    do I have to do any prep first to install this ?
    do I have to hold any special keys down on start up ?
    I dont mind having to do a full frech install ? (I was planning this anyway with Mavericks just come out)
    inside the MP I already have
    20gb ram
    ATI GPU
    Blackmagic Intensity Pro (HDMI in/out)
    Esata pcie card
    any help would be fantastic

    Hi ada mann,
    If you are having issues with an Apple RAID card, you may find the following articles helpful:
    Mac Pro RAID Card: Identification and compatibility
    http://support.apple.com/kb/HT3514
    Mac Pro RAID Card and Xserve RAID Card: Frequently Asked Questions (FAQ)
    http://support.apple.com/kb/HT1346
    Regards,
    - Brenden

  • CAN the Mac Pro deep-sleep with the Apple Raid Card?

    So, reading through previous posts, there seems to be a problem (or 'feature' to charge the battery?) that prevents the Mac Pro from sleeping when the Apple Raid Card is installed.
    Can users owning this setup corraborate? Is this indeed the intended way to work?
    Thx,
    Dan

    as far as I know, deep sleep is only available for portable machines. if you meant regular sleep I cant help you because I haven't got a RAID card.
    edit: I may have confused deep sleep with safe sleep… sorry.

  • Lion, trim & SSD on Apple RAID card

    Hi, I have a MAc Pro 2x2.8 Ghz Quad-Core with an Apple RAID card and SO OS X 10.7.2.
    It has 2x SSD in stripe o and others 2x500 GB also in stripe 0.
    I'd like to know if is possible to enable TRIM support for SSD disks with this setting, and if I can have a real improvement to live their linked to RAID card or is better to keep out raid card and connect without it.
    Tnk to all!!!

    Apple Pro RAID card isn't perfect, has limitations, and it has made it harder.
    http://www.softraid.com excellent software RAID
    even Apple RAID (software) is fine but I would never use Apple for mirroring.
    Use to be and may still be true that you risk using any drives but Apple's with Apple firmware, if you go Apple RAID route.
    On PCs you have Intel motherboard RAID, can add controller, and software is shunned totally. Software RAID with Mac OS X seems more than fine.
    I'd take a thorough look at this site:
    http://macperformanceguide.com/index_topics.html
    Other than RAID5 I would not touch Apple card, maybe if someone just HAD to use SAS, maybe.
    http://www.barefeats.com/hard104.html
    And yes drivers and support can be a pain. Some of the blame I see as how every OS and even minor updates break and require rework.
    http://www.macgurus.com/store/ecom-prodshow/BurlyRAID.html
    Checked out Sonnet to see what they offer? FirmTek 6G and NewerTech, but not hardware.

  • MacPro2009-Apple Raid Card-2.2TB limit

    Hello,
    I have a MacPro (early 2009) with an Apple Raid Card. Lion 10.7.4
    I just bought a 4 Tb Sata hard drive and there is no way to make it work on the Apple Raid Card. When it mount , it only show a capacity of 2,2 TB and Apple disk Utility is of no utility with it on the Raid Card.
    So I managed to hook it in the Optical Drive bay and I have now a 4 TB volume available for Network backup.
    Can you confirm the limit on the Apple raid card
    Version Matériel:          2,00
      Version du programme interne:          E-1.3.2.0
    Thanks,
    Marc LE BRET

    I have this same issue with a mid 2010 MacPro Server running 10.8.2/OS X Server (10.8) and the Apple RAID Card with 3 - 1TB drives and an added 4TB drive (in Bay 4) that is only being seen with the 2.2TB limit.  I even initialized it and tested it a bit with my MacPro1,1 and a NewerTech toaster on eSata.  Very nice to see a workaround with the optical bay... thank you for that suggestion!  I was going to go to another enclosure or hard drive "toaster" / dock that allows 4TB drives and use eSata or FW800 as a connection... the 2nd optical drive bay sounds great and will give it a try. 
    The only thing I can figure from all this and talking to Tier 2 AppleCare is that the RAID card is only 32 Bit addressing O.o  ... which seems crazy but makes the most sense.  They will more than likely respond with "The drive is unsupported, since it isnt an "Apple" HD."

Maybe you are looking for