Apple recovery (DFU) usb driver

Hi Guys..
My ipod classic 80gb wont load in itunes, and it only comes up as an Apple Recovery (DFU) usb driver in the device manager...
All i want is to use my ipod again. What do i need to do, do i have to download a new driver or something. I have reinstalled itunes and tried to find DFU drivers but nothing is working. I havent got a clue now what to do.. The ipod is useless right now, just a black screen =(
Please help..

Try to manually put the iPod into disk mode:
http://docs.info.apple.com/article.html?artnum=93651
Then connect to iTunes and try to Restore it:
http://support.apple.com/kb/HT1339?viewlocale=en_US

Similar Messages

  • IPhone 4 Apple Recovery (DFU) USB Driver NEED HELP!!

    Hello,
    My iPhone 4 got version 4.2.1 but when i go to computer > properties >device management then i see: Apple Recovery (DFU) USB Driver.
    I know that it is in dfu mode but i really dont know how i can get out of here. I tried everything what i can do i tried now 3 days to fix this but i dont have any results. My iphone 4 wont turn on but when i connect it with my computer than it says it is in recovery mode. So does anyone know how i fix Apple Recovery (DFU) USB Driver??????????

    Jailbreaking is bad mmmkay.
    To get it out of DFU, generally hold down both the Power/Wake button and the Home button together for ten seconds, then release the Power/Wake button and keep holding Home until the White Apple shows up on screen. (Literally the same thing you would have done to put it into DFU in the first place..)

  • Apple recovery (iBOOT) USB DRIVE msg

    ipod no longer recognised or activates in itunes only this msg above and no drivers found to update.
    any advice.
    actual ipod touch shows usb connection cable with arrow upward towards itunes logo
    any help appreciated. ricky

    Ok, go to start menu>> Control Panel>> Administrative tools>> Services. Make sure that the "Apple Mobile device" and "iPod service" services are started.
    If they aren't started, right click on them and click "start". See if that works.
    If they ARE already started, try this:
    Hold down the iPod touch's home button while plugging it into the computer, this will force restore it, and that might fix the problem. Just finish the restore process in iTunes if it works...
    I hope these methods work...
    -Messymeese
    Über Enbonpoint Pangolins FTW!

  • Hi all issues with iphone 4 after update apple recovery iboot USB driver access denied have tried everything I can find and can't get it to work pulling my hair out

    Hi everyone
    Need some help desperately
    Was syncing my iphone through itunes and it wanted me to update the version which I thought it did
    Now my phone keeps telling me to connect to itunes which I have tried without success.
    In device manager it's showing as apple mobile device in recovery mode with an exclamation mark
    Have tried so many options from this site but nothing works.
    When I tried to update in device manager it says access denied
    Have also tried reboot without success
    Going absolutely mad need a real expert
    Pleeeaaase thanks

    Hi Brenni17,
    If you had an issue during an update and now having issues restoring your iPhone, you may find the troubleshooting steps outlined in the following article helpful (apologies if you have already seen it):
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • Apple mobile device USB driver is missing and cannot be installed

    Hi,
    My iPod nano (6th gen) is not recognised by iTunes but is recognised by Windows sometimes (once in 2-3 attempts).
    Every time I connect my iPod to my laptop, a window pops up saying "an iPod is detected but could not be identified properly...".
    I looked through apple support page and narrowed down the cause to the driver.
    Apple mobile device USB driver does not show up in Device Manager.
    However iPod does show up under Portable Devices as a camera when iPod is recognised by Windows.
    I tried reinstalling Apple Mobile Device USB Driver as it was shown in the support page (right click on iPod in Device Manager>update driver software>...).
    This did not work (gave me an error saying "the folder you specified doesn't contain a compatible software driver for your device...".
    So I tried another method I found online; extract iTunes installer (itunes6464setup.exe), extract AppleMobileDeviceSupport6464.msi in it, and use the files in it to update driver.
    This gave me the same error.
    It seems that a Windows driver is installed for my iPod (WPD FileSystem Volume Driver); when I opt for "search automatically" in Uptade driver software, this driver shows up with the message "the best driver for your device is already installed".
    Also, my iPod is shown in Devices and Printers with an exclamation mark (when I connect my iPod to my laptop, the exclamation mark shows up only after I click OK on the message window "an iPod is detected but could not be identified properly...")
    Troubleshoot showed "Windows is uninstalling this device (Code 21)".
    I'd appreciate it if someone could help with the situation.
    I'm using Windows 8.1, iTunes 12.1 for Windows 64bit, and iPod nano 6th gen.
    I haven't connected my iPod to my laptop for a long while, but I recall connecting an iPhone to my laptop a while ago and it was recognised just fine.
    After that I updated my Windows from 8 to 8.1, but I don't think it has anything to do with the problem as my iPod wasn't recognised by iTunes before and after the update.
    Thank you in advance!

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases. Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Apple mobile device usb driver not digitally signed

    I installed(updated) itunes 12.1.1.4 64-bit on wildows 7. Then, it can not recognize iphones and ipods any more.
    I tried every means to fix this, updating windows and itunes, uninstalling and installing, rebooting and restarting.......
    Finally, I find that the apple mobile device usb driver is not digitally signed.  I found this when I open the computer/manage/device manager/portable device/iphone/update driver.  Windows installed mtp usb driver for apple products and indicating the related apple driver software cannot be installed.
    what's wrong with this?  should I wait until apple solve this problem?

    I suggest you try the "for older video cards" version...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

  • I cant install apple mobile device usb driver

    i plug my ipod touch 4g into my computer and it starts charging, but it doesnt appear in itunes. if i put it in dfu move or w.e its called , it will pop up in itunes to restore it but after it restores and i unplug it and plug it back in, it wont appear again. ive tried everything on the forums ive reinstalled itunes and i just think its because the apple mobile device usb driver isnt installed. my computer doesnt recognize my ipod as a camera either because i couldnt find it in device mananger on windows 7

    someone please help

  • TS1538 What do I do after step 6 in "If the Apple Mobile Device USB Driver is not listed"?

    i'm very confused about step 5, "Verify that the Apple Mobile Device USB Driver is installed" > "If the Apple Mobile Device USB Driver is not listed", what do I do after step 6? I looked for and found the entry that recognizes the device as a camera, "Apple iPhone, now what? I'm trying to resolve an issue. After an iTunes upgrade in July 2012, I have not been able to get my iTunes to recognize any of my devices. I have uninstalled/reinstalled iTunes, all the steps. Now I'm on this one and I don't know what to do after this step 6. I looked and found the entry.... now what??? I am out of room on my phone because everything I buy on iTunes on the computer mysteriously appears on my iPhone 4, and everything I buy on my iPhone mysteriously uploads onto my iTunes the next time I open it. My phone will charge when connected to the computer, and Windows recognizes it and asks how I want to open pictures, etc. But in iTunes it will not show up under Devices. This is getting beyond ridiculous and I have to get some of this music off of my phone!

    Found a possible solution for me.
    While the phone was plugged into my computer and iTunes is CLOSED.
    1. I went to Services in Windows.
    2. I selected Apple Mobile Device and right clicked and selected "Stop".
    3. Then I right-clicked again and selected "Start".
    4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall".  You will get a warning about uninstalling the device.  Click OK.
    5.  At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
    This re-installed the iPhone and everything started working again.

  • I synced my phone lastnight and now it says my phone cant connect to computer the Apple Mobile Device USB Driver doesnt work?!? i deleted itunes and reloaded still not working.... Does anyone know how to fix??? i just want to upgrade to IOS6

    Does anyone know why my Iphone will not connect to my computer all of a sudden? I backed it up lastnight. Now it wont even register with my computer.... It says Apple Mobile Device USB driver doesnt work all of a sudden???? i tryed deleting and reloading and nothing is working!!! someone please help =)

    Have you done:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    What results do you get when you run this:
    iTunes for Windows: Device Sync Tests
    Do both the Home button and Power button work OK normally?

  • I updated to iTunes 10.7 and now iTunes does not see my iPod Touch.  It says the Apple Mobile Device USB Driver cannot be installed.

    I updated to iTunes 10.7 and now iTunes does not see my iPod touch.  After the update I got a message that the Apple Mobile Device USB Driver could not be installed.  I have uninstalled and reinstalled iTunes 3 times, but still cannot fix the problem.  I have followed the suggested fixes in Apple Support.   Any suggestions?  Thanks!

    Try the actions here for that driver.
    iOS: Device not recognized in iTunes for Windows
    I would first do this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • IPod touch 5th gen will not connect to iTunes, also apple mobile device usb driver does not appear in device manager. PLEASE HELP.

    I recently purchased my iPod touch with no issues. After updating to iOS 8.1.1 I found that my iPod would no longer appear in the latest version of iTunes and when I searched for Apple Mobile Device usb driver in the device manager, it was nowhere to be found. I've already uninstalled and re-installed ALL components of iTunes and read every single help article. I've tried everything. What went wrong?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Unable to install Itunes 10.1 or 10.1.1  -Apple Mobile Device USB Driver

    Unable to install Itunes 10.1 or 10.1.1 and have it sucesfully install the Apple Mobile Device USB Driver. It keeps coming up with an error that the driver is unsigned or disappears completely from device manager.
    I have tried full uninstall including cleaning registry keys and file system. If I uninstall and re-install 9.2.1 usb driver works perfectly and I have no issues synching with phone or seeing the phone in Itunes.
    I have tried repair installs, updating the drivers by pointing to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    I have tried removing all USB devices and having them reinstall from Windows after a reboot. Nothing seems to work.
    I just got a new IPAD and cannot use it because I cannot install 10.1 at least to have it connect. It came with IOS 4.2.1 on it.

    I also encountered the same problem.
    and yes, I uninstalled and reinstalled itunes 10.1.1 bla bla blahhh....
    Same issue!!! itunes cannot open cuz the mobile device support not started etc..
    but when reinstalled prior itunes version 9.2 its gone
    and issue fixed.
    i can sync my 3G.
    but not my 4G. it says you need to upgrade to 10.1 or above
    spending the whole night to fix the problem which never occured b4
    i finally find out one thing.
    pl keep in mind im not a computer exprt
    i tried this and it worked, i don know what fixed it, bt it works
    try this at your own risk. some comp genius will tell us weather this way is right or not.
    ok. lets start...
    in your desktop make a new folder. name it Kmh_\CoreFP
    try uninstalling the newer version 10.1
    only the itunes not other mobile div suprt, application suprt etc.
    dont mind the following order:http://support.apple.com/kb/HT1923
    and reinstall itunes 9.2
    go to C:\Program Files\Common Files\Apple
    you wil find a folder named "CoreFP"
    copy it and paste to Kmh_\CoreFP
    uninstall itunes 9.2
    and reinstall itunes 10.1 again
    go to C:\Program Files\Common Files\Apple
    you wil find folder named "CoreFP"
    find the difference in properties comparing the one u stored in Kmh_\CoreFP
    ok delete it and replace it with the one we stored stored in Kmh_\CoreFP
    restart the computer and start itunes now
    what happens?
    best of luck.
    -Kmhm63
    reinstall the newer version 10.1
    I would suggest that you revert back to prior working version until Apple comes out with an update that fixes what 10.1.1 broke.

  • ITunes won't recognize my iPod. I have the Apple Mobile Device USB driver installed in my programs but it doesn't show up in my Device Manager or Services. Can someone help?

    So I connected my iPod to iTunes and an error message came up saying it needed an updated version of iTunes 64 bit and I was missing the Apple Mobile Device USB driver so I downloaded it because another discussion said that was the solution. I did but it wont show up in my device manager or services. Can someone help me figure out whats wrong?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • After updating to iTunes 12  the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

    After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
    I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
    I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

    Found a possible solution for me.
    While the phone was plugged into my computer and iTunes is CLOSED.
    1. I went to Services in Windows.
    2. I selected Apple Mobile Device and right clicked and selected "Stop".
    3. Then I right-clicked again and selected "Start".
    4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall".  You will get a warning about uninstalling the device.  Click OK.
    5.  At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
    This re-installed the iPhone and everything started working again.

  • Apple mobile device USB Driver won't install (Code 37) on my 7th Generation iPod Nano

    As a result, iTunes won't detect my iPod. But the iPod will charge when I plug it in to my comp, and there is an iPod folder in "My Computer". But after installing iTunes, it no longer says “connected” on the iPod (even though it still charges it). And, in Device manager, there is a yellow exclamation mark that appears in the DVD/CD-ROM drive directly after installing iTunes – there is also a yellow mark next to “Apple mobile device USB Driver” when my iPod is plugged in. For both, it says “Code 37.” I know how to fix the DVD/CD-ROM drive problem (by deleting the filters) but the Apple driver still won't install after that. I've tried troubling shooting this. I uninstalled and reinstalled the drivers, but it hasn't made a difference. And I've uninstalled and reinstalled iTunes multiple times, too, and every time I reinstall iTunes the same thing happens: my iPod no longer says “connected on the screen,” and the  DVD/CD-ROM drive gets code 37 again. Also, I tried different USB cables/ports.
    Any help of suggestions would be greatly appreciated. And I think I've already read a lot of troubleshooting guides on this site, but haven't had any success so far.

    Sorry, I'm confused. What do you mean by “leaving all other USB devices disconnected”? Does that include my mouse, keyboard, etc? And does that mean I uninstall those things in the device manager?

Maybe you are looking for

  • Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170:

    Hi all, I have an Windows XP OS with SP3. I have installed the Oracle 11g server. On trying to connect to the ODBC connection, i get the following error message: Unable to connect SQL State=S1000 [Oracle][ODBC][Ora]ORA-12170: TNS: Connect timeout occ

  • Time stamp / serial number

    Trying to create a serial number that is stamped with a dealer ID code, and the current date/time when the form is initially opened. var dealer_id = String(Dealer_ID.rawValue); var today = new Date(); var serializedNumber = Dealer_ID + today.getTime(

  • Supported webservers with IFS1.1 / Oracle 8.17

    Hi, I'm wondering if iplanet webserver(ver4/5) works? We are looking at other webservers due to Apache doing wierd things if you don't log out. (see the link below) http://technet.oracle.com:89/ubb/Forum36/HTML/001166.html Is JWS an option? performan

  • Restting the number ranges

    Client Copy: Each time a client copy is made, material movement postings cannot be processed until several number ranges are reset and the user gets the message Express document “update was terminated”. These number ranges can be reset thru SNRO. But

  • Zero crossing, "Triggering" and XY-Graphs

    I'm trying to measure the electrical hysteresis of a sample.  The way in which I do this is by measuring two voltages within a circuit, sending them to my DAQ, and then plotting them in an XY-Graph to view the shape of the curve.  I can somewhat see