Apple Remote Desktop Win XP, Apple Remote Desktop Win XP

Hello Everbody!
I would like to use Apple Remote Desktop 3 to view also the PC computers (XP and 7) on my network.
Could you tell me how can i set up Apple Remote Desktop and PCs please?
Thanks
Giovanni

I would suggest that you not do so and instead use Microsoft's remote desktop connection solution to view your Windows systems. But if you really want to use ARD, you would need to install a VNC client on your Windows systems. I'm not sure what VNC clients work with the latest version of ARD, but if you search this forum for "VNC" you may find some suggestions.
Regards.

Similar Messages

  • How to remote desktop mor than 2 session in win server 2003

    how to remote desktop more than 2 session in win server 2003?
    plz help me

    Hi Javed,
    Do you need any other assistance?
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • How do I install Firefox on Win Server 2012 Remote Desktop?

    I have tried several ways to download and install Firefox on my Win server 2012 Remote Destop. The software installs, but the installation loops and continuously opens new tabs for
    res://iesetup.dll/SoftAdmin.htm
    Are there special instructions to install Firefox in this environment?

    The url in ie gave me this page [see attached] and I did find a question similar in mozillazine [http://forums.mozillazine.org/viewtopic.php?f=7&t=173325&start=0&st=0&sk=t&sd=a]
    But there is also an extended support release for enterprise environments that you can check out: [https://www.mozilla.org/en-US/firefox/organizations/]

  • HT1600 How can I turn on home sharing on my Apple TV if I lost the remote?

    How do you turn on home sharing on my Apple TV if I lost my remote?

    You can not do anyting to ATV if you do not have the only device that controls it.  You can get a replacement for $20.

  • HT1551 How do I pair multiple apple remotes with the same apple TV

    I have one apple TV but it is is access on multiple screens via a matrix system. I therefore need an apple remote in each room so I am not having to carry the same one from room to room. Please can someone let me know how this is achieved . . .

    It's almost counter-intuitive the way this works. You have to actually "unpair" the remote that it is paired to - then once no specific Apple TV remote is paired, all remotes (any remote, including standard TV remotes) will work!
    The step-by-step would be:
    Using a remote that is currently paired navigate to General under settings.
    Go to Remotes.
    Select "Unpair Apple Remote"
    Once unpaired, simply back out of all the menus using the menu button to see that it does work. Then try on your other remote(s). It/they will now also work.
    You can even use the Learn Remote feature to use a standard TV remote. I use my Directv remote and it works great.
    The ONLY thing you need pairing for is if you want only one remote to be capable of controlling the ATV. So therefore unpair any remote that's paired, and you'll be golden.

  • Since upgrade to Windows 8, cannot save .rdp files under the Remote Desktop Connection application on the Desktop

    Since I upgraded to Windows 8, I am no longer able to save individual Remote Desktop Connection files as .rdp files. I am talking about the traditional Remote Desktop Connection application on the Desktop that was in previous Windows versions, not the
    Remote Desktop App from the Windows 8 store.
    When I try to click on the Save button I get "An error occurred while saving to file"
    When I try to click on the Save As button I get "Unable to open connection file" with the file address being where I tried to save it with the file name at the end.
    Also when I upgraded to Windows 8, my .rdp files disappeared from my Documents folder.
     I need to create different .rdp files for different programs that my employees get into on my server. Now I have to hand type all the info each time into the Programs tap on the Remote Desktop Connection window, because I can't save to an
    .rdp file.
     I like the Remote Desktop App from the Windows store but it won't let me designate specific programs to use using standard dos notation (ie c:\program files\ etc..). It just goes to my server desktop.
     I want to promote Windows 8 to my employees but I need either .rdp files for the traditional Remote Desktop Connection or the ability to open specific programs using dos notation in the Windows Store Remote Desktop App.

    I know this is an old post but others might still be having the problem. Here's what I did.
    Create a new text file and open it in notepad. Copy the below into it and edit for your environment. (IP, screen size).
    screen mode id:i:2
    desktopwidth:i:1920
    desktopheight:i:1080
    session bpp:i:24
    auto connect:i:0
    full address:s:192.168.x.x
    compression:i:0
    keyboardhook:i:2
    audiomode:i:2
    redirectdrives:i:1
    redirectprinters:i:1
    redirectcomports:i:1
    redirectsmartcards:i:1
    displayconnectionbar:i:1
    username:s:USERNAME
    domain:s:DOMAIN
    alternate shell:s:
    shell working directory:s:
    disable wallpaper:i:1
    disable full window drag:i:1
    disable menu anims:i:1
    disable themes:i:1
    bitmapcachepersistenable:i:1
    use multimon:i:0
    winposstr:s:0,3,0,0,800,600
    audiocapturemode:i:1
    videoplaybackmode:i:1
    connection type:i:7
    networkautodetect:i:1
    bandwidthautodetect:i:1
    enableworkspacereconnect:i:0
    allow font smoothing:i:0
    allow desktop com:0
    disable cursor setting:i:0
    redirectclipboard:i:1
    redirectposdevices:i:0
    drivestoredirect:s:*
    autoreconnection enabled:i:1
    authentication level:i:2
    prompt for credentials:i:0
    negotiate security layer:i:1
    remoteapplicationmode:i:0
    gatewayhostname:s:
    gatewayusagemethod:i:4
    gatewaycredentialssource:i:4
    gatewayprofileusagemethod:i:0
    promptcredentialonce:i:0
    gatewaybrokeringtype:i:0
    use redirection server name:i:0
    rdgiskdcproxy:i:0
    kdcproxyname:s:
    You don't need to worry too much about what's in here. Save the text file as
    filename.rdp then rightclick on the file and select edit. The familiar GUI rdp session editor will open. You can make changes in the GUI and
    save or save as a different session.
     Hope this helps.

  • Can I See My Mac's DeskTop on the Apple TV?

    Can I See My Mac's DeskTop on the Apple TV ? (MY TV Sceen)
    Or Can I see My (Mac Book) Desktop On My TV through The Apple TV?

    thanks

  • HT1555 My Apple TV wasn't working so I returned it. I kept the same remote from my previous Apple TV and it's not responding to it. What should I do?

    My Apple TV wasn't working so I returned it. I kept the same remote from my previous Apple TV and it's not responding to it. What should I do?

    Don't you have 2 Apple remotes now?
    Either way, hold menu and down key together for 6 secs and that should fix it unless the remote is broken or battery is flat.
    AC

  • Streaming desktop mac to apple tv via Airplay-Monitor is currently very bad connection since last updates

    Hello
    I have this simple Problem. I can't watch any Movies or listen any Music by streaming my Desktop to the Apple TV Box (via AirPlay-Monitor) anymore since latest updates (Mac book and Apple TV Box). I also updated my fritbox 3390 but is not working
    Streaming my Desktop to Apple TV Box was working very good before.
    Does anyone know what this problem is?
    Thank you in advance

    Hello mirko,
    If you are still experiencing streaming issues to your Apple TV from your MacBook, I would use these troubleshooting steps from the following article:
    iTunes: Troubleshooting AirPlay and AirPlay Mirroring
    Wi-Fi Connection
    If you are experiencing intermittent playback or significant network lag with AirPlay, it could be due to a weak Wi-Fi connection, interference, or the distance between the Wi-Fi router and your AirPlay-enabled device.
    Ensure that other devices aren't trying to stream to the same Apple TV at the same time.
    Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
    Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
    If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
    Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
    Ethernet Connection
    Temporarily disable firewalls (both network and local) and security software. Security software and firewalls may block ports that AirPlay uses to stream content. You can often resolve issues with security software by updating, correctly configuring, or uninstalling security software.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Remote Codes to Control Apple TV

    Apple would never EVER make a TV device that could not be controlled by our TV and/or universal remotes.
    Have made numerous posts to ask what is the 3 digit code for my SONY RM-YD017 and DirecTV Remotes.
    The nightmare is beginning that this cannot be done...could someone please wake me and tell me that our universal remotes can control the Apple TV...pls..
    If the answer is yes, please tell me how, if the answer is NO, shame on Apple.
    thx much all

    Chenks,
    Thx much for your quick reply, but....
    What the heck is a logitech harmony remote??????
    I am looking to see if and how my SONY remote RM-YD017 that I purchased only six months ago can control my Apple TV?
    Or if my Direct TV remote could also do this.
    There is NOTHING in the Apple TV, Sony or Direct TV manuals that tells me how. Hope the Flintstones at those firms will please answer my/our requests.
    Also see terms like "pairing" your device, but nothing in any of the manuals.
    Thx Chenks.

  • Can I watch TV through a Slingbox on my remote HD TV using Apple TV?

    Can I watch TV through a Slingbox on my remote HD TV using Apple TV if, how do I do that?

    I have an elgato EyeTV 250 connected to my 27 inch iMac and it works beautifully.

  • HT201397 My "remote" can't control my Apple TV, however apple tv still received signal from "remote"

    My "remote" can't control my Apple TV, however apple tv still received signal from "remote" . Before that I have to press and hold the menu button, then the "remote" icon appeared on the screen.

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • White Apple Logo Computer, Want to Use Remote

    I have a white apple logo computer and want to use my silver colour apple remote. Sorry I'm not that good with all this computer jargon, but when I press pause the music on my computer doesn't pause.
    LOL I was taking the ****, I have an imac g5 which has an ir blaster, I'm trying to use the aluminium apple remote that came with my apple tv with iTunes. I followed a guide that apple gave that suggested bringing the remote up to the imac and pressing play/pause as well as enter or something similar. Anyway I don't have the orginal white remote and was wondering if it's even possible to pair the apple remote with an imac g5.

    Troubleshooting the Apple Remote - Apple Support

  • HT5922 can i watch the dvd in my desktop on my apple tv?

    can i watch the dvd in my desktop on my apple tv?
    What are the steps?

    I'm new to this aspect of technology so sorry if I seem a bit lame here but what is the advantage of Apple tv if I have the ability to go wifi from my computer to my smart tv? I know if I had an old stlye tv that would be necessary but didn't think so with my newer set up.
    Again I just recently purchade this setup and was hoping to watch a dvd on my tv from my mac via wi-fi, (our old dvd player won't connect to the new tv...
    Thanks for your help, not trying to be difficult just trying to learn and understand.

  • Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

    Does Apple make/sell the new "Apple In-Ear Headphones with Remote and Mic" with a one sided configuration? So that a person that is deaf in one can hear both sides of a stereo recording? Also, since the "other" bud is not necessary/useful...it's removed.

    As far as I know, Apple sells no such configuration.  However, under Settings > General > Accessability, there is an option to play back audio in monoural mode, which would then play both halves of a stereo mix in each earbud.
    Hope that helps.

  • HT204053 I have downloaded Lion onto my MacBook Pro.  My husband and I share a desktop.  Can download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use.

    I have downloaded Lion onto my MacBook Pro.  My husband and I share a desktop.  Can we download Lion onto the desktop from my Apple ID without causing problems for my husband's Apple ID use?

    Yes. In the future, however, only you will be able to update Lion because it will now require your Apple ID.

Maybe you are looking for

  • Samples using UTL_FILE package

    hello; I would like to use the utl_file package: fopen, put_line ... can you send me some samples using this package. thanks to your help mam null

  • Dynamic Rows won't display ..

    Hello,        I have been facing a problem with Interactive form with XML interface, which was being used as offline interactive form, I was asked to add the online process using the same form to be called as Online interactive form. When the form is

  • Installation on HP DL's

    I am about to deploy a Solaris 10 server for exporting iSCSI shares on an HP DL. Is there any advantage to using HP's provided network driver over the module included? Will it actually perform any better? Thanks!

  • Skinning table. Change width of the table.

    I want to change width of all table so that sub-control-bar gets affected too. I've learned that there's no way to define it that way: af|table { width:60%; and if I write: af|table::content { width:60%; and then change width of sub-control-bar compo

  • Impressionist Filter (Plug in?)

    I'm looking for an artistic filter that gives an Impressionist painting effect. Searched the Forum knowledgebase and found one entry by Terri Foster referring to a plugin from www.trimoon.com/html/down . When I tried to go to that site, I got an inac