Apple remote is not working with Logic Pro 8

Hi all
Anyone any idea why, it would really help me as I need to remotely activate the record button. Many thanks Dave

My guess: it is simply not compatible with 10.6.8 (which was released well after Logic Pro 8)

Similar Messages

  • Novation Remote 25SL Not Working with Logic Pro (Logic Automap)

    Hi,
    I can't seem to get my new Novation Remote 25 SL to work in Logic Automap mode.
    I have the Remote SL in Logic AutoMap (template #39). When I launch Logic Pro 7, The Remote SL shows : "Logic AutoMap" on the Left LCD display, and nothing else happens, it seems to be frozen at this state. The Up/Down arrows on the Left side don't change anything.
    Any clues why this is happening ?
    I have read many posts on this and other forums of user issues in setting the Remote up properly, and have it work in Logic Automode. Tried many configurations, and settings, re-installed sw, OS 1.0.13, but no luck so far.
    I would like to hear from Logic Pro 7 users who have successfully setup their Remote SL with Logic Pro 7.2.1 in Logic Automode, and are working with this system without any issues.
    This will be very helpful in figuring out if there is something wrong in my settings, or if the unit itself is defective, or I am doing something wrong during the installation of the software ? I have been trying to get this thing to work for the past two days, with no success so far.
    The Remote SL should be a wonderful controller for Logic Pro 7 (once it works !) so, I'm being as patient as I can with this thing.
    I'm using Logic pro 7.2.1 on a Mac G5 2.5 Quad, Mac OSX 10.4.6
    Thanks.

    Hi Blaze,
    I tried your settings, but no change, the Remote SL is still frozen showing :
    "Logic Automap" on the left LCD .
    You mention setting "Mixer View 64" well the parameter I see is called :
    "Mixer View Fader" which I guess is the same one you are referring to. I set it to 64, it was set to 8, but has not changed anything. Still having the same problem. This problem is dragging into Day 3, what a bummer.
    Thanks.

  • Apple Remote won't work with Logic

    I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

    jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
    I've searched the Internet and am finding little on this topic.

  • Apple remote contra not working with Lion

    I installed Lion and my littele apple remote control does not work anymore with my mac book pro.
    Is there any solution for that?
    Thanks

    It's not working for me either.
    I know that Lion doesn't include Front Row, but the remote is not working with any other application (ex. iTunes).
    Please somebody help us!

  • USB Interface Not Working With Logic Pro 9

    Hello,
    I've had a Tascam US-1641 for several years now with absolutely zero issues on my old PC. Ever since I upgraded to Mac (early 2011 17 inch Macbook Pro running Snow Leopard) I've had nothing but problems with the US-1641. No matter how many times I uninstall-reinstall the drivers and what USB port I plug it into, whenever I turn on the device and it's connected to my Macbook, it crashes my operating system and it freezes everything I was doing. Logic Pro doesn't load and when it sometimes does (10 minutes later), it immediately crashes when I click anything.
    I've tried several tips to fix it and nothing worked. The most popular choice was select the default input/output in Logic to the system audio, then quit Logic, turn on the interface, then restart Logic. No such luck. I have to reboot my machine at least 5 times, uninstall/reinstall the driver and hope it works to use the interface. I thought it was the operating system, so I upgraded to Mountain Lion and installed the new driver for Mountain Lion, after of course deleting the other drivers and removing all previous data, and it is still giving me the same problems.
    I don't have the money to afford a replacement model or a different interface from a different company, so I'm hoping you guys can help me figure out what exactly it is that's causing the interface to freeze my operating system and crashing my Mac whenever I try to use it. I am getting extremely frustrated at this and as much as I love OSX and Logic, what good is this piece of software if I can't use it? I need help.
    Thank you.

    The problem lies with Tascam and their inability to write stable drivers for OS X...  and isn't anything to do with Logic Pro ..
    As you know, you are not the only person to have had this issue and the reality is, while the 1641 might work fine with  Windows, when it comes to OS X Macs.. it's an entirely different story... depending on the version of OS XS you are running.
    The one tip I have read, that seemed to fix it for most people.. (Though not all) is as follows;
    (Thanks to Paulypaulpaul for this)
    -uninstall your tascam driver 2.10
    -restart
    -install driver 1.03
    -restart
    -plug in your tascam
    -goto where you download your drivers (http://tascam.com/product/us-1641/downloads/), scroll down to the bottom where it says firmware, Download the firmware 1.02 (3rd from top under firmware), install it. your control panal should now read 1.03 for your drivers and 1.02 for your firmware.
    -install drivers 2.10
    -restart
    Follow each of the steps exactly.. including all restarts when indicated..
    ...and good luck...

  • Apple Remote Now Not Working With MacPro

    I've a MacPro (Late 2007) and it came with an Apple Remote.
    I've used it quite frequently with this computer, but haven't used it for a couple of months. I recently needed to start using it once again but the computer no longer responds to the remote!
    I've checked the remote and it still works perfectly with my MacBook Pro, and the battery is fine.
    I've gone onto the Apple website and the support says to check in the Security plane that the infrared is not disabled - but this no longer appears there! It used to be there, but now it has disappeared!!
    Was this due to one of the updates?
    HELP! I need to be able to use the IR Remote once again with this computer!!

    Sorry, but are you sure you're referring to the correct Mac, the minitower-case Mac Pro? There is no Mac Pro model identified as "Late 2007" - there were the first Mac Pro model introduced in August of 2006, though you might have purchased yours in late 2007. The next revision was in early 2008.
    Nor, to the best of my knowledge, has any Mac Pro included an infrared port nor come with an Apple Remote.
    So please confirm that you are indeed talking about the minitower Mac Pro and not an iMac, Mac mini, MacBook or MacBook Pro, all of which did come with infrared ports.
    Regards.

  • MIDI Keyboard Not Working With Logic Pro X

    I have a MIDI keyboard that I've had for a while. I've upgraded to Logic Pro X, but the keyboard isn't working. I can't hear sound when I play it, nor when I record and try to play it back to myself. What's more frustrating is that I used this keyboard all of the time with Garageband, and there were no issues . It's a simple M-Audio DigiCore MIDI keyboard, and I've updated everything, but I just can't get it to play. I am new to this software, so I'm having a really difficult time navigating this as well, so any help is welcome.

    Ok here's what happened, controller was working fine everything set up, then it quit. called tech help at sweetwater, the motu was not seen as a midi interface anymore...went to motus web site, downloaded update for 10.4.4 THAT WAS IT! now it works!
    Take note....thanks for your replies!

  • Garritan, Aria Player not working with Logic Pro X

    heading says it all. Spent all day downloading latest Arai PPlayer and Logic will not recognise...
    Currently ARIA works with Windows 64 bit, but not yet with Mac 64 bit OS.
    There is this in the pdg Manual...
    Steve

    Sorry, that's the only option I didn't cover in my answer - I should have said: fades only work on unflexed audio regions that are not in take folders.
    You can create a comp, export or flatten that and create takes on the exported track/regions, but you can't create fades inside take folders.

  • Midi keyboard key A2 not working with Logic Pro 8

    Hello
    I was using an m-audio keyrig 49 for a good 3 months, when all of a sudden the A2 key stopped working properly. The transport bar in logic shows that midi data is being received when I press A2, however there is no velocity value. The key only makes a sound when I'm going from another key to it, and even when that happens there is a sustain effect on the note, which aren't on any other keys.
    I have tested this on midi keyboards from m-audio, novation, and edirol... keyboards that require drivers and keyboards that don't require drivers.
    Any ideas?

    Try redefining the key commands. Sometimes they can be a little flaky when importing earlier key commands. Redefining them might "unstick" them...

  • Wha wha pedal work well with GarageBand but don't want to work with logic pro 9.1.8 on my MBPro end 2011

    Install on MacBook Pro end of 2011 with logic Pro 9.1.8 and Apogee GIO interface guitar
    The wha wha pedal work well with GarageBand but not working with Logic Pro
    Only the red light turning on and off at the screnn of the MBPro and on my Apogee GIO (Guitar Interface Midi) switch button but the effect wha wha won't work.
    HOPE YOU UNDERSTAND MY ENGLISH

    Pancenter...
    Yes... but I have come across some setups that came with a native SL (and even one Lion!) installation.. that somehow had a corrupted or older Prokit installed for some unknown reason... and given it's a quick fix to try.. I thought I'd mention it..
    I frankly don't think it is entirely a Prokit issue itself, but it wouldn't do any harm to try and install v7 just in case it is part of the problem...
    +1 on the UAD stuff....
    Also, at the time it crashed... according to the logs...the OP was running Ableton Live at the same time, presumably rewired with Logic... so add all that together with UAD plugins... and that's quite a load on the system...
    Finally in thread 32 there is a weird exception msg relating to the Trash2 plugin.. that I haven't seen before...
    Thread 32:
    0   libSystem.B.dylib      
    0x94c29afa mach_msg_trap + 10
    1   libSystem.B.dylib      
    0x94c2a267 mach_msg + 68
    2   ...tope.audioplugins.AU.Trash2
    0x667bd57a catch_exception_raise + 250
    3   libSystem.B.dylib      
    0x94c57259 _pthread_start + 345
    4   libSystem.B.dylib      
    0x94c570de thread_start + 34
    That might be nothing... but as i said, I haven't seen that one before and given what else is going on.. it might be involved too... or nothing to do with that at all!

  • My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

    My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
    I am getting an error message as soon as I try to connect my Apple TV
    An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
    it was working fine however after the upgrde it is giving me the above error message

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • HT1619 my remote is not working with the new imac 27" :(

    my remote is not working with the new imac 27"    i do not know even if new imac has infrared at all , pcworld shop said yes it should work . but hey i tried everything including security setting checks

    <http://store.apple.com/us/product/MC377LL/A/apple-remote>
    "Not compatible with MacBook Pro with Retina display or iMac (Late 2012)."
    There are some USB IR receivers that allow the Apple Reomote to work with software such as Remote Buddy
    <http://www.iospirit.com/products/remotebuddy/>

  • 01v96i Yamaha...will it work with logic pro X

    I bought the new Yamaha 01v96i Mixer but I can't make it works with Logic pro, in the list of available DAW I only find the 01v96 which is not the same and in-fact it does not work with the 01v96i.
    Does anyone have an idea on how to set Logic for it or at least does anyone know if the new Logic Pro X has the new 01v96i in the list?

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • Will the Tascam FW-1884 work with Logic Pro X?

    Hello,
    I notice that the new Logic is 64 bit only and yet the Tascam FW-1884 is specifically listed as a supported control surface.
    Tascam has not released 64 bit drivers for this device!  Can anyone shed any light on this?  Will it work only as a control surface and not an audio interface?  Is the documentation in error?  Anyone have this working with Logic Pro X?
    Thanks,
    Lyford Rome

    Lyford,
    Again, in regards to hardware... it is not about LPX compatibility.. It is about compatibility with the OS X version and it's CoreAudio... Once you 'get' that point then everything else makes sense...
    Tascam are notorious about leaving owners of "End of Line" products 'high and dry' when OS X is updated... and as you have found... the 1884 is not compatible with Mountain Lion 10.8.4 and likely will never be so... because Tascam will not be releasing Mountain Lion drivers for it.. so, it is not something you can use with LPX, which requires Mountain Lion 10.8.4 as a minimum requirement.
    As an aside, Apple have acknowledged they make an error in simply using the LP9 Hardware compatibility chart for LPX (as LP9 could be used with earlier OS X versions for which there were drivers for the 1884 for example) and have said they will be issuing an updated version "in the near future"......

  • APPLE TV DOES NOT WORK WITH NETFLIX

    APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
    I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

    It started working.....!!!!!  (It seems someone back there is listening)
    I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
    I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
    TIPS:
    I didn´t change any language or video quality configuration (scared to do so)
    I changed to ethernet (cable) instead of wireless
    My internet plan is 6 Megabytes (it was the same while it wasn't working)
    good luck!!

Maybe you are looking for