Apple remote to connect to my 'Air'

I tried to connect my Apple remote control to my Apple 'Air' by following the Apple instructions. It doesn't work; checked with 2 remote controls and battery. Any thoughts? Thanks, Rainer

THe apple remote uses infrared signals if I am not mistaken.
there is a red lens on the end.i
I don't think the MacBook Air has an infrared port.
you  need to look for a radio frequency type of controller such as a bluetooth controller or a wifi controller.
there may be an iPhone app for what you want to do.

Similar Messages

  • Using apple tv to connect mac book air to tv

    Does anyone know if it is possible to use the apple tv to display something from a macbook air on to my tv?
    Or does the apple tv only display objects from itunes? if so, what cords would have to be purchased in order to do this?

    reed-o wrote:
    what kind of cord could be purchased in order to connect the macbook air to a tv? it really only has a usb plug
    no idea, you might get an answer in the macbookair forum.

  • Apple Remote desktop connection with different internet network

    I did purchase "Apple Remote Desktop"in mac app store, it works well in the same wifi's network but when i try to use different network, but i won't connect.
    It said " Please make sure Screen Sharing in the System preference", but it won't works as well.
    Please help
    Mac OS: 10.9.1
    Apple Remote Desktop: 3.7.1

    The first thing I'd suggest is that you talk to your network support group and make sure that the necessary IP ports, primarly 3283 and 5900, are open between the two networks. If those are blocked, ARD can't connect.
    Hope that helps.

  • Apple Remote Desktop - connect to computer after their password changed?

    I have a problem with Apple Remote Desktop which is driving me up the walls.
    When I observe or control a computer, Apple Remote Desktop saves the username and password so that next time I'm not prompted for a username or password.
    Problem is, when the password on the computer changes and I once again try to control it, Apple Remote Desktop simply comes up with an "authentication failed" message. There is no option to put a new username and password in. I cannot find any option to delete previously stored passwords.
    Currently I'm resorting to deleting:
    /private/var/db/RemoteManagement/ClientCaches
    /private/var/db/RemoteManagement/caches
    It is extremely frustrating doing the above each time a computer's password changes!
    I must be missing something. Does anyone have a better way of going about this?

    Hi Zachary!
    Have a look at RealVNC at http://www.realvnc.com/download.html. Install this on your Windows computer and be sure to configure a password for VNC connections. You should then be able to see your XP system in Apple Remote Desktop.
    Keep in mind that the VNC software is free (unless you choose to purchase a version with more features) but the Apple Remote Desktop client is a commercial product http://www.apple.com/remotedesktop/.
    If you need a different (free) client for your Mac, I suggest using the Microsoft Remote Desktop Connection client found here http://www.microsoft.com/mac/otherproducts/otherproducts.aspx?pid=remotedesktopc lient. This only works with Professional version of Windows XP and not the Home version. Or you can downlod a VNC client for Mac such as Chicken of the VNC found here http://sourceforge.net/projects/cotvnc/.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.4)  

  • Apple Remote desktop connections to anoter compter though the internet

    I recently purchased Apple Remote Desktop 3.2 and I was told that it can be used to remotely connect to another computer at my office from my home. I have tried to add it by add computer by address but it comes up with an error message and can not connect. I am sure I have the right IP and user name/password. If you can please give me any documents on how to do this task and or tell me step by step how to do it. thanks I just want to remote log in in to a mac that on another network using remote desktop. Any help would be awesome. Thanks

    The subject of connecting ARD via the Internet has been covered here many times already. Search the forum for "Internet" and you should find multiple posts on the topic. You can also look at this web page if it's back on line (it was down when I last tried it):
    http://www.starklmc.com/ard.htm
    It should help, though you may have to refer to your router's documentation for specifics on opening and forward ports in that particular unit.
    Regards.

  • Apple AirPort WiFi connects to MacBook Air and iPad but not iPod Touch

    I got my iPod touch 4th Gen in December for xmas and the wifi has worked perfectly fine until about a week ago only on my ipod, it just says 'Unable to Connect' everytime I try and connect but works on my MacBook Air and iPad
    It's a WPA2 Personal security
    I've tried all the suggestions on the Apple Support page, including resetting the network settings

    Does the iPod connect to other networks?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • HT1619 I cant seem to pair my apple remote with my new macBook Air (2013) 11" 256GB...?

    My MacBookAir is an 11" mid 2013 model. They told me in the apple store when I purchased the MacBook Air it would work but I don't think the 11" has an infrared receiver?
    Anybody tried to do this?

    maybe use my iphone 5?
    <https://itunes.apple.com/ca/app/remote/id284417350>
    <http://www.iospirit.com/products/remotebuddy/ajaxremote/>

  • I can't connect to my iTunes library on my Macbook Pro using the Apple Remote app on my iPhone 4S. Why?

    Hi all,
    I've been looking through the forums for help with this problem. There are a couple of threads with similar problems, but no solved threads and the discussion doesn't seem to go anywhere... As far as I can tell, it's been causing a lot of annoyance for many users, including myself, but it looks like the community's in the dark about why it's happening!
    I'm trying to connect to my iTunes library using the Apple Remote app on my new iPhone 4S. As you may know, there are two ways to do this:
    Connect via Home Sharing by setting up Home Sharing on both iTunes and the iPhone, or
    Connecting directly to iTunes using a four digit passcode.
    I've tried both methods, and neither work!
    Here's what happens for each method:
    From the Remote app start screen, I tap the "Turn on Home Sharing" button. I enter my Apple ID details (which are definitely correct), and get a confirmation message on my phone saying "Home Sharing is on using [my email address]. To control iTunes: Choose Turn On Home Sharing from the Advanced menu in iTunes on your computer." I then go to iTunes, turn on Home Sharing, enter my Apple ID again and get a confirmation message saying "Home Sharing is now on", etc. However, there's no connection formed between my iPhone and my Macbook Pro - the Remote app just shows a message saying "Turn on Home Sharing in iTunes on your computer or on Apple TV using the account [my email address].
    From the Remote app start screen, I tap "Add an iTunes Library", and the four digit passcode is shown on my phone. I select the new "Quintin's iPhone" item that appears in the iTunes sidebar under "Devices", and enter the passcode on the screen that appears. Once I've entered it, I get a confirmation message saying "Your Remote is now able to control iTunes" with an "Okay" button. Clicking the "Okay" button makes the screen and the sidebar item disappear completely. On my phone, a message that says "Looking for ..." is shown on the screen with a spinning loading wheel, but nothing happens. After a minute or two, it stops and simply says "Could not find".
    After trying both methods, I went through all of the troubleshooting steps here: http://support.apple.com/kb/ts1741 . Absolutely no effect.
    I should mention that I was experiencing similar problems on my old iPhone 3Gs with an older version of iTunes. I thought it might have been some kind of hardware fault and expected it to clear up once I got the new phone, but the problem is still there. It's a new phone, a new computer, a newer version an iTunes... even a different network I'm trying to connect to it on. Bizarre!
    I've even tried using the Mobile Air Mouse remote application instead. However again, the Mobile Air Mouse app on my phone can't pick up the Mobile Air Mouse server on my Mac.
    I'm kind of at the end of my rope here. Anyone?

    I have the exact same problem trying to use the Remote app on both my iPhone 3gs and iPad 2 with either my Mac or ATV2.  My Remote app used to work on my phone - I can't recall if I ever actually used it with my iPad, but when I tried today, I got all the same results as you did (on both iPad, and then iPhone).  I  was using my ATV2 to play music from iTunes on my Mac and wanted to use the Remote app, but it would not connect to either device no matter what I did. 

  • Can I use Apple Remote desktop to connect over the internet?

    I would like to use Apple Remote Desktop to connect back to my MacPro desktop at home while I am on my Macbook Air at work.  Will I need a static IP from my service provider to do it.

    Hi
    It's not absolutely necessary but it would be more useful if you did have one. Most ISPs will require you to have a business class broadband service at your home rather than a residential one. These cost more (a lot more in some cases) than a residential service. Call your home location's ISP and discuss it with them.
    If the cost is too much then you could go for a DynDNS account which is free. The details of this account would be configured in the whatever you're using as a firewall at your home's location. This assumes the firewall has the facility to add such an account. Thereafter it's just a question of configuring the port fowarding feature of that firewall.
    A potentially 'big' problem though is whether or not your workplace will allow that kind of traffic out of their network. This would be something you'd need to discuss with them first.
    HTH?
    Tony

  • Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method.  iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'.   How do I fix this issue??

    Trying to connect my iPad Air 1 to my iPhone 5S set as a hotspot via WiFi method.  iPad sees the iPhone as wifi hotspot, but an error appears 'Remote Hotspot Failure .. Unable to start personal hotspot'.   How do I fix this issue??

    iOS: Troubleshooting Personal Hotspot - Apple Support

  • How do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system prefer

    how do I connect my new (purchased last week) macbook air to my samsung smart tv? I purchased the adapter at the apple store and connected to the TV via HDMI cable.  The TV says "no signal.  I do not see TV as an option in the display tab of system preferences.  what else do I need to do?

    First, make sure your TV is tuned to display the correct input signal. Most TVs have several inputs (multiple HDMIs, cable connections, RCA etc) so double-check that you're using the correct one - HDMI1, HDMI2 or whatever is written next to the port.
    I assume that you have a mini-Displayport to HDMI adaptor? If you open displays preferences, first tick the box that says "show display preferences in menu bar" then locate the menu and click Detect Displays. See if that helps.
    Matt

  • HT1338 cannot connect my MacBook Air to a projector  -does not detect and 2nd monitor. I have a new Mini port to VGA cable made by apple. When I read online I see that many people have the same problem - Is this an Apple defect??????????????????

    I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?

    Hi There,
    I have had the exact same issue but with a projector.
    The issue lies with Mountian Lion 10.8.2.
    I tried many a combination with no luck to get HDMI working.
    Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
    Bought my macbook home and voila, now displaying through my projector.
    There is a small graphics update after 10.8.1 which seems to be the cause.
    Hope this helps.
    Thanks.

  • Can't get Apple Remote App to stay connected to my ITunes library.

    I recently had my modem and router taken out by lightening.  So I replaced them both with what is supposed to be the latest and greatest.  Simultaneously, Apple had a new version of ITunes, so I updated.  Now I can't get the Apple remote app to stay connected to ITunes.  If I start ITunes on my computer, my IPhone 5 will see and connect to the library, as well as my IPad.  But as soon as my IPhone or IPad goes to sleep and I try to reconnect to the library, it can't connect to the library.  I've never had any connection problems before and not sure what is causing the problem.  I can turn off Home Sharing in ITunes and turn it back on again, or restart ITunes and it works, but as soon as the IPhone or IPad goes to sleep, it won't reconnect again.  Is this a router issue or ITunes Home Sharing issue?  Any input to resolve this will be greatly appreciated..............because it is really annoying not to be able to control music the way I did before!  All products have the latest updates.

    Take it back and exchange it.
    If the remote doesn't work out of the box new then either remote is faulty or AppleTV is faulty (eg IR sensor not located properly in the case).
    Either way one of them isn't working, exchange it.

  • HT1555 how do you connect an iphone to be a remote for Apple TV without the apple remote?

    how do you connect an iphone to be a remote for Apple TV without the apple remote?

    you can use the remote app.
    http://www.apple.com/apps/remote/

  • Air play in Apple Tv disconnects with no reason, and I need to restart the router to connect again. Meanwhile apple tv is connected to wi if. Can somebody help?

    Air Play in my Apple TV disconnects from iPhone or Mac book after some time of playing. I need to restart the router in order to connect again. Apple tv is connected to wifi succesfully? Any suggestion?

    I tried something new yesterday after reading all these messages.  My ATV3 was situated on top of my satellite box and I noticed that it was quite warm.  The instruction manual suggests that the box not go over a certain temperature, so I moved the box to a location without the heat under it.  It now works without any problem at all...at least, so far.   

Maybe you are looking for