Apple's iOS7 causes issues with LightSpeed's webfilter login

We discovered today after updating some of our school iPads to iOS7 that it breaks the login page with our Lightspeed web-filtering service. The symptoms are: whatever page you authenticate to the filter from, you will not be able to access that page again once you're authenticated. You can access any other allowed website except for the one you authenticated on. It just gives a blue page/screen when you try and access it again. For example, the first site I try to go to is Google.com and I get the prompt to log into the web-filter. After logging in, I can visit any other allowed site except Google.com. This is the same no matter what website you first authenticate to. We downloaded Google Chrome to see if it had the same affect in a different web-browser and it works fine using Chrome. Also, after you authenticate into Lightspeed, if you go into the Safari settings and clear the cache files, its works properly. So it’s something to do with Safari and the way its caching the page you authenticate to. Has anyone else who uses Lightspeed's web-filtering seen this yet?
Thanks

We have the exact same issue in our district.  We use Lightspeed'd web filter, and every single iOS 7 device I've seen has the same problem.  I believe what is happening is that when you browse to, say, Google, and Lightspeed redirects you to its login page, Safari thinks the login page *is* Google, and it caches that.  So, when you log in and hit "Browse the web", Lightspeed redirects you to Google, and Safari's cache kicks in and says "I have Google cached, here you go" and serves up what it *thinks* is Google, but is really the Lightspeed login page.  It has been frustrating many of our users to no end, and I've completely lost track of how many times I've had to explain it.
While clearing the Safari cache after logging in to Lightspeed will fix the problem, it's a pain, so here's what I advise my users to do:
1) Use a different browser, such as Chrome.  That's what I did on my iPad.
OR
2) The first time they want to get on the internet, open up a site that they're *not* trying to go to, like maybe msn.com (who uses THAT anymore, right?  Haha).  When they get the login page, log in, and then when it comes back, then go to where they really wanted to go to, and it should work fine.
I hope Apple comes up with a fix.  But of course, they'll say it's not their issue, despite the fact that it worked fine in iOS 6 and works fine with other browsers in iOS 7.

Similar Messages

  • I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. How can I resolve this issue?

    I have a 2012 Macbook Pro and the GPU is causing issues with Yosemite. There are a number of issues I have run across:
    If I have four tabs open on Safari then I start to get a flickering on the screen from the GPU refreshing
    When I leave the computer alone for more than 20 mins the screen saver should start -- what happens is that the screen goes to black. When I move the cursor I do not get the login screen. I have to reboot
    FireFox Web browser will not run
    I get issues with the computer running very slowly
    I have already turned off the transparency option in settings. Any ideas??
    Cheers
    Matt
    MacBook Pro, OS X Yosemite (10.10), GPU / Video Card with Yosemite

    Do you have more than one OS on the Mac?
    You may want to look at something like http://bjango.com/mac/istatmenus/. This has a Free Trial window, but it is a commercial application. If there are any heat/sensor issues, this may help.
    A SMC Reset or PRAM/NVRAM reset may also help.
    Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
    Startup key combinations for Intel-based Macs - Apple Support

  • MovieClip Filter Causing issues with EventListeners (mouseEvent.ROLL_OVER)

    Hello,
    I have been working on a flash photo gallery for the web. It loads thumbnails from an xml file into a loader which is then made the child of a movieclip.
    The thumbnails are animated and triggered with mouse events of ROLL_OVER and ROLL_OFF. I have this working, or appearing to, when the movieclip containing the loaded thumbnail has no filters applied to it.
    I want add a drop shadow on the ROLL_OVER event and remove the drop shadow on the ROLL_OFF event. I also have this working, however my problem arises when I mouse over the very edge of the movieclip. This cauese the ROLL_OVER and ROLL_OFF function to fire in rapid succession, creating a flashing dropshadow. This looks aweful and I really have no idea what would be causing this issue.
    Thanks in advance for any advice!
    Regards.

    Thanks for the reply.
    I also found it difficult to believe that the filter was causing issues with the roll over/out events. I will expand on the example code you provided so you get an idea of what I am trying to accomplish and where my issues arise.
    EDIT: I should add that the issue is only present when I tween AND add a filter. If I only add a filter or if I only tween I have no issues but the combination or adding a filter and tweening causes the OVER/OUT events to fire rapidly.
    //This code does not result in a flashing animation
    myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
    myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
    function overClip(e:MouseEvent):void
       myTween =  new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
       myTween =  new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
    function outClip(e:MouseEvent):void
       myTween =  new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
       myTween =  new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
    //However if i add these lines of code to add and remove a filter I can observe the flashing effect when the mouse is near the edge of the moveclip
    myClip.addEventListener(MouseEvent.ROLL_OVER, overClip);
    myClip.addEventListener(MouseEvent.ROLL_OUT, outClip);
    function overClip(e:MouseEvent):void
       myClip.filters = [myDropShadowFilter];
       myTween =  new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1.5 , 3, true);
       myTween =  new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1.5 , 3, true);
    function outClip(e:MouseEvent):void
       myClip.filters = [];
       myTween =  new Tween(myClip, "scaleX", Regular.easeOut, myClip.scaleX, 1 , 3, true);
       myTween =  new Tween(myClip, "scaleY", Regular.easeOut, myClip.scaleY, 1 , 3, true);
    Is there something obviously wrong with this approach to adding a filter/tweening? I am fairly new to flash.
    Thanks again!
    Message was edited by: Dafunkz

  • Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

    Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

    Upgraded to IO6, seems like the amount of system memory to run is higher, this causes issues with some Apps. I can't get SIRI to work because the amount of free system memory is not enough. how can I tell what is eating the system memory?

  • Reader causing issues with dropped underscores in courier new font

    When converting a microsoft word document in 2013 or 2007 to a PDF is causing issues with dropped underscores.  It only seems to happen in courier new.  For instance if I have _someCode, when converting this over to a PDF file I will sometimes see _someCode and sometimes I will see someCode.  If I open this file in a different pdf reader then it looks correct 100% of the time.  If I copy and paste into another application then the underscore shows.  This is a major issue for people putting code into a PDF document as underscores are important and courier new is what we often use.

    I love how quick you are to throw Microsoft under the bus.  Often it is their fault.  In this case I believe you are 100% wrong and absolutely short sighted to ignore this.  As I said in my original email, which you apparently missed, I have tried this in multiple PDF viewers and Adobe Reader is the ONLY reader that misses the underscores.  Foxit, PDF Exchange and Sumatra all render it perfectly.  Adobe reader missed 6 underscores in my document that has 18 underscores.  30% of the time in this document Adobe Reader makes the underscore invisible.  And if I switch the zoom to 100% instead of 148% (which is the default for me for some reason) then Adobe Reader misses 7 of them.  This doesnt occur in the other readers.  Blame Microsoft all you want but the simple fact is that Adobe Reader has issues reading courier new's underscores.  It needs to be fixed.

  • Pre-n enabler seems to cause issues with lock up/beach ball

    I just received my new C2D MBP yesterday with 3G of RAM and all was peachy. I decided to install the $1.99 Pre-N enabler patch from Apple and it appears that I'm not alone in having that cause system lock ups and beach balls from ****.
    I unfortunately seem to be in the same boat. It runs for awhile and then all of a sudden it will just lock up and I'll get the spinning beach ball from **** forever, until I reboot.
    I'm using mine with a NetGear Pre-N wireless router and while I'm getting 140kpbs connections I am getting a lot of receive errors and the machine just goes off to la-la land.
    I was worried about something else until I read these posts over in Internet & Networking and now I'm wondering if there really is an issue with whatever the "enabler" did. It ceratinly appears to be this. Nothing else seems to cause it this kind of beach ball death.
    So now I guess we need to look for an "un-enabler" patch. Just out of curiosity where do we email problems like this to get resolved?
    UGGHHHHHHH!!!
    Peter

    I have this same problem. I reported a bug to apple bug id#4990056
    Here is what i wrote:
    10-Feb-2007 10:36 PM Brooks Roy:
    Summary:
    I recently got a Linksys WRT350N 802.11n router and using it with my macbook pro core 2 duo. The router is firmware version 1.03.2.
    After installing the enabler from the apple site i verified it upgraded properly and it shows a/b/g/n for my airport card. However the computer has been locking up more and more. I finally narrowed it down to the airport card. Here is what happens:
    Steps to Reproduce:
    With regular airport usage, the mac will all of the sudden give the spinning 'beach ball' and just sit there. A simple http download will stop and the mac will become unresponsive. I cannot launch new applications. The icons will bounce in the dock but never open. I cannot force-quit any applications. My only option is to hold down the power button for a hard shutdown.
    I can almost duplicate the issue 7 times out of 10. Sometimes it takes 15 minutes or so before it locks up, sometimes its almost immediately.
    I have done a full fsck and permissions. I also downloaded tiger cache cleaner and cleaned all settings. I have also booted off the apple install cd and done a extended full RAM check on the 2Gb installed in my computer.
    I have restored my IO80211Family.kext from my other macbook pro (regular core duo) and my problems have gone away. I am 100% sure there is a bug with the 802.11n enabler and the Linksys WRT350N.
    I do not have any special configuration on my linksys, just MAC based wireless authentication.
    When using the MacBook pro on the WRT350N in 802.11g without the latest 802.11n enabler the mac performs fine and does not become unresponsive.
    Expected Results:
    I expect the mac to perform just as a 802.11g network will work with increased transfer speeds.
    Actual Results:
    See above.
    Regression:
    It only occurs when using network traffic (i.e Mail.app, Safari browsing sites, etc. Any application that requires Airport.
    Notes:
    I am using the original IO80211Family.kext driver that does not have 802.11n support and it works properly. Also using builtin ethernet with airport off and the 802.11n driver works (obviously).

  • How to I contact Apple about a support issue with Game Center--itself, directly. I changed my Apple ID and now I cannot access my game center account that I had previously. It created a new one for me with my new apple ID instead of keeping the old one.

    I want to submit an issue with Game Center--itself, directly. I had an account set up that I used to play online games. I changed my appleID and then I no longer could access my game center account. I, apparently, had a new game center account created for me (which is friends with my old account) and now I cannot access my original game center account.
    If I can't get access to email apple directly (which seems ridiculously difficult to do), then someone please tell me how to FIX the issue.
    Thank you

    Yes. I have tried that. When I use the ID I had before, it sets it up as a new account and I don't want to lose my stats attached to my old account.
    Let's say that my old nickname was "user10" and I used the email, "[email protected]" for my apple id. I changed my apple id to "[email protected]" and it changed my game center account to "mynew" and somehow I am friends with my old acct, "user10". I tried getting a password reset for "user10" but I apparently don't know my own birthday, which is possible because I usually give a false one, but the same false one each time.

  • Using "Restrict by app" in change query causes issues with Search Results

    Hello!
    I am hoping some experienced SP admin can help me out. I am having issues with the relevance ranking for my search results web part.
    I created a Wiki (OOTB) within a site collection and on the home page of the Wiki I was looking to apply a Search Box and Search Results web part for easy searching. I wanted to ensure the search results were restricted to the scope of the pages within the
    wiki. I did the following after adding the 2 web parts:
    Entered edit mode for the page
    Started to edit the Search Results web part
    Under Properties for Search Results clicked on "Change Query"
    Navigated to BASICS and clicked "Switch to Quick Mode"
    For Select Query, picked "Wiki (System)" option
    For Restrict by app, picked "Specify a URL" and input the wiki URL "http://webapp.com/sites/sitecollection/wiki"
    Click OK
    The web part has 6 automatic results when I hit the page. These are the only 6 pages in my wiki. When I search a word or title of a page, they are not ranked in order or relevance. The ordering is static to what was being shown before the search, but the
    keywords I'm searching are bold. With out the taking the steps above, I can easily search these pages and have them ranked appropriately so I'm not too sure what I'm doing wrong. 
    Other Details
    The pages have been crawled and can be searched from anywhere else in SP.
    I am only a site collection admin for this specific site collection.
    I other than the steps above, I have not made any changes or customization to the search web parts; they are both out of the box SP.
    The SP Farm admin we unable to pin point what the root cause is either.

    Hi Mikael,
    Sorry for the wait, I was unable to post pictures, which i felt would better describe my issue.
    Could you output the query template you are ending up with?
    If you can tell me how to accomplish this, then I can provide it. Please keep in mind that I am only a site collection admin.
    Also, is the ranking/sorting for your webpart set to ranking?
    When looking at the web part settings, I didn't see an option to modify the ranking. Unfortunately, some sites in my intranet are down now so I can't even double check. Once it's back up, I will verify this as well.
    And how do you know they are ranked incorrectly?
    I wanted to display an image showing what I meant by this. As the wiki is down, I'll do my best with words. When I visit the wiki home page, I already have the search and search results web parts there. Without searching anything, the search results
    web part displays 6 pages that are available in the wiki. When I search, I expect to see the most relevant result at the top. similar to the following: 
    *Search result from another section of the intranet site.*
    What I receive instead is the same list of wiki pages, in the same order. The most relevant result
    is not moved to the top like in the image above, but I can see that the word "rush" is highlighted in bold. I hope this helps.
    If you need more of a description, please let me know.
    Thank you

  • Apple TV video streaming issue with EA4500

    I am facing issues with my router EA4500 and my apple TV. When I am watching a video from my itunes library at my PC, sometimes stop palying waiting to receive data. Is that a way to conect my apple tv to my router to prioritize this video streaming from my PC to apple TV? Can someone help me? Do you have the port list for Apple TV?

    I'm sorry if I confused you! Regarding the firmware version you currently have (2.0.37.131047) it shows that you are using the Classic firmware in which we would suggest that you upgrade it using the Linksys Smart Wi-Fi Firmware. This Linksys Smart Wifi uses the latest firmware for your router that might help you fixed your problem. Click this link below where you can download the new firmware for yor
    router. http://homesupport.cisco.com/en-us/support/routers/EA4500----Can you tell me what version of apple tv you have? If your Apple Tv happens to be dual band then I would suggest that you connect to the 5ghz network because it can give you better video streaming capability. Yes you can choose which device you want to connect to the 2.4 or 5 ghz as long that device/s is dual band.

  • Exchange upgrade causing issues with internal wiri...

    Recently our exchange was upgraded to accommodate bt infinity and at the same time our broadband started playing up. we called bt and I spent 1.5 hours checking and re checking equipment with the call center. Tests were done with the hub at either end of the internal wiring. All the tests were still showing faults even with hub connected to the test socket. They asked me to leave connected for 24 hours while they monitor the line. They promised to call me back which they did not. I called them again the following day to be told I should have left the hub in the test socket which I was not told the previous day. I then had to wait 48 hours while they monitored the line this time in the test socket. All the tests still showed the fault was still there so an engineer called out.
    The hub was still in the test socket when engineer arrived and the first thing he did was hook up his test equipment to the test socket and he stated there and then that there was nothing wrong with the line but it had been throttled down. 2 minute phone call and 10 minutes later broadband was back and working perfectly at the test socket. He checked the internal extention and the faults were being thrown up by an extension that has been in place for 10 years +. He stated to me that the new equipment installed in the exchange was more advanced and did more line checks so, although this equipment has been used for Internet with BT for 10 years it is no longer adequate.
    All of this I find understandable but the whole way that BT handled this from day 1 of my first call has been appalling. BT openly admitted that the original engineer calls were handled badly and we were credited £9 for the lack of services we had for overly long time. However we are now, 2 months after this, faced with nearly £130 charge for the engineer visit which, looking back with the info I have now, was completely unnecessary. Had the engineers on the phone bothered to reset the line while hub was in the test socket when they were allegedly monitoring it for 48 hours they could have told me there were no faults on their equipment up to the socket and I would have sorted out the internal wiring myself. Even now I can find mention on the Internet of old wiring causing issues but no specific posts to do with exchange upgrades potentially meaning that you need to upgrade internal wiring or mention by the BT call center itself on any of the calls I made to them. All I was told was that everything up to the main box is BT and everything after that mine but since we have made no changes to the wiring we did not think it was applicable until the engineer arrived and told us what he told us then. Yesterday I called Bt again around 9am to dispute the charge. I was informed that because the fault was with our equipment the charge stands. I explained all of the above and I had my case put to the review team. I was told I would get a call back within 4 hours which I did but the phone rang 3 times and as I answered they hung up. I then got a text saying they had tried to call and asked for me to call back which I did to be told that his computer wasn't working. He took my details and said someone would call me back which no one did. I chased again to be told that someone would definitely call me that day. No one did. I chased again today to be told the decision still stands. He has put to final review and promised a call back within 5 days. Until this is resolved direct debit is cancelled. To the letter of the contract we have with BT this is our charge to pay I know that but this could have been avoided if the information was out there on the net, if the original checks done over the phone were done correctly or if I had been told this directly by Bt themselves prior to the engineer being called out which is why I am posting this here so hopefully no one else falls into this trap.

    You're right I'm not connected to the BT infinity cabinet. But the BT Infinity cabinets all still route back through the exchange that I am connected to -
    http://www.ichilton.co.uk/blog/phones/faster-broadband-bt-infinity-fibre-to-the-cabinet-coming-to-in...
    Quote :
    What this modem does is connects using VDSL from your home to the VDSL cabinet using the existing copper wires, on to the DSLAM, back to the exchange (over the fibre) and on to BT’s core network.
    Your phone line is then still terminated in the original cabinet for telephony (using the cross connect between the old and new cabinets I mentioned above) and back to the exchange over the original multi pair copper cable as it always has done.
    http://www.robertos.me.uk/html/fttx.html
    Quote:
    FTTC involves BT Openreach installing a new street cabinet near to the existing one and linking the two. They run optical fibre from the exchange to the new cabinet then link individual lines from the old cabinet to the new one and back to get VDSL2 onto the copper connection to the premises. The PSTN phone connection continues to operate over the pre-existing cable from the old cabinet to the exchange.  It does not get put onto the fibre connection.
    In other words the linkage is Exchange >> Old >> DSLAM in New >> Old >> Premises. (Traffic in both directions of course!)
    Presumably the equipment in the exchange cannot stay as it is and is upgraded in the process?

  • Apple 27'' Cinema display issue with nvidia quadro 1800 - Win 7 64bit

    Hello,
    I'm trying to help out a buddy of mine with his cinema monitor.
    He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
    Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
    I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
    The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
    What am I missing? 
    Thanks!

    Hello,
    I'm trying to help out a buddy of mine with his cinema monitor.
    He has a Windows 7 x64 machine, with a Nvidia Quadro 1800 - monitor hooked in via DVI port.
    Basically when you boot the PC up with the Apple monitor, the monitor turns on and backlit but no display, no options for BIOS or anything like that, just lit up and black screen.
    I can boot up the PC with a Dell monitor and it boots up fine - and if I take the DVI out of the Dell monitor and plug it in to the Apple monitor while the machine is up and running, the Apple monitor comes on and works without issue - however, if you were to reboot it, or if it goes to sleep - I lose the Apple monitor, and have to start the process over.
    The Windows machine recognizes the Apple monitor, it displays as Cinema monitor - all the video card drivers are up to date - also had the same issue with a previous video card (I swapped the video cards out thinking initally it was a bad video card)
    What am I missing? 
    Thanks!

  • 8.3 causing issues with safari, "Safari could not open the page because server stopped responding"

    Since my upgrade to 8.3 there are several issues with many apps when they are trying to download information.
    When I go to Safari and open i.e. msn.com.  it tries for over 60 seconds.  then I get the error:
       Safari could not open the page because server stopped responding.
    I have a iPhone 6 plus with 113 gig  and 65 gig available
    This same issue is causing problems when downloading articles on facebook and instagram app.
    We also noticed this same issue on Macbook Air, and iMac, iPad 2, and iPhone 5s.
    I also have the Mac Pro without these issues but it is connected by ethernet instead of wireless. 
    Is wifried back and now plaguing all devices?
    I selected mac because, I was tried of all the PC issues with new updates.  It seems mac is now lowering its quality to that of PC.
    We need a fix for this ASAP!

    I have tried resetting my Iphone 6 Plus by holding both the off and select buttom.  This did not help. 

  • APPLE PLEASE FIX THE ISSUE WITH ITUNES STORE CONNECTION PROBLEM..PLEASE..

    Allot of people are having major problems both Mac and Windows users..cant connect or major Lagging problems..

    Allot of people are having major problems both Mac
    and Windows users..cant connect or major Lagging
    problems..
    Have you tried contacting your ISP to see if they can talk you through a trace from your computer to phobos.apple.com?
    Some people with AOL were having problems and it turned out that their tracelog revealed connectivity issues.
    You say that a lot of people are having problems but I'm not having any problems up here in Canada connecting and I had no problem yesterday or on friday. I have had problems in the past but I assume that it was network issues on the ISP side since I had problems connecting to some other sites as well.

  • Apple Support admitted an Issue with WEP authentication and some Routers

    After reading many posts here and other places I logged a service call to Apple support. With the particulars: AT&T U-verse 2 Wire router would not connect with WEP would connect with Security disabled. I wanted a call logged before I went past the return time
    I got a call back immediately after a few basic questions I was passed to a product manager for ipads, it seems connectivity issues are taken seriously.
    The upper level support said there were known issues with some routers and WEP security we steeped through changing the security and it works fine now.
    Bottom Line:
    Apple knows there is an issue with some routers
    They were very helpful and acknowledged the issue.
    He even stayed on the line while I reconfigured one of my Windows PC to make sure it connected to the new settings
    I suggest to all to log a call and get a tech support involved before taking the iPad to the local store
    They certainly new their are some connectivity issues. If that does not work you can always return it.
    He did not admit it was a Apple issue and did not commit that Apple was working on it but it is something they are aware of.
    So skip the Apple store got right to tech support.
    Just my 2 cents.

    "But folks need to go straight to tech support. I live in oz, so it will be interesting to see if they help me.. or not.. but if support gets inundated they will fix it or have a massive recall (not likely on the latter)."
    Can't agree more. I used to manage a tech support department and it is all about the numbers. No matter how many forum entries the issues that get addressed are dictated by the reports.
    So for those that are buying new routers contact Tech Support first even if you end up getting a new router the call is logged that will get Apple's attention.
    People that are not familiar with post launch processes have no idea how things that need to get corrected and enhanced are dictated by support requests

  • Web Logic 10.3 upgrade causes issues with escaped characters in JSP.

    We recently upgraded our application servers from Weblogic 9.2 to Weblogic 10.3 and we are having an issue with escaped characters in a JSP code. Here is an example of what we are seeing:
    var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
    This code works in Weblogic 9.2. In Weblogic 10.3 we have to make the following changes:
    var convertedBody1 = document.getElementById('body').value.replace(/\$FIRST_NAME\$/g, firstName);
    Thanks, Tom

    Hi:
    I have resolved the issue with the following in the jspx page.
    Put an
    <jsp:scriptlet>
    response.setContentType(“text/html; charset=UTF-8”);
    </jsp:scriptlet>
    Inside the <f:view> on the jspx file.
    Please refer the link http://www.oracle.com/global/il/support/tip/nlss11061.html for more details. It is helpful.
    Thanks & Regards
    Sridhar Doki

Maybe you are looking for