Apple Scripting for Microsfot Power Point 2011

Hi,
I am having problem with following apple script. This is working fine with Office 2004 but when i am using office 2011 then on action is changing to «class BCOa». Can any one please help me in this. I will be very thankful
tell application "Microsoft PowerPoint"
set btnAbout to make new command bar control at command bar ¬
"CPS" with properties {control type:control button, button style:button caption}
-- Set button style in "with properties" block
set width of btnAbout to 60
set name of btnAbout to "About"
set *on action* of btnAbout to "cpsHandleAbout"
set tooltip text of btnAbout to "About CPS for PowerPoint"
end tell

Hm, not sure if this helps, but perhaps... first create this command button by hand...
then run
tell application "Microsoft PowerPoint"
get properties of command bar control "About" of command bar "CPS"
end tell
this returns the properties of this button...
something like:
{class:command bar button, begin group:false, built in:true, name:"About", description text:"", enabled:true, height:22, help context ID: 0, help file:"", id:2520, entry_index:1, left position:674, parameter:"", priority:3, tag:"", tooltip text:"&About", top:324, control type:control button, visible:true, width:28, button face is default:false, face id:23, button state:button state up, button style:button automatic}
If the button uses a build in command you will get to know the id of this command...
e.g. the ID is 23 (open file)
make new command bar control at command bar ¬
"CPS" with properties {id:23}
and this would create such a new button...
But I am not sure who to get a list of all action ids...

Similar Messages

  • Apple script for Message box when Mail app Compose Window Opens

    Hi there
    I'm trying to make mail app remind me to choose the right emaill address to send from since I have several email addresses. Is there a way I can make or write an apple script for a message box to pop up whenever mail app's compose window opens up.
    I can do for the case when I actally click the compose button when I'm on mail app by using UI scripting. But when it comes to hyperlinks which opens up the compose window, it fails.
    I just want a script to see whether the compose window is open and if open pop up a message box.
    Thanks
    Best regards
    Zam Shabeer Thahir

    TaoChitpol wrote:
    By the way, the problem happens with the account of MS Exchange service, I don't know if this is the cause of the problem.
    I think yes.  The encoding is being corrupted somewhere, probably Exchange.  There is nothing you can change on the iPad other than the OS languagel, to see if that helps.  You can also tell Apple at
    http://www.apple.com/feedback/

  • Apple Script for deleting podcasts

    I subscribe to a lot of podcasts, but I don't want to keep them in my iTunes library after I'm done listening to them. Is there an Apple Script for automatically deleting podcasts? Thanks.

    Thanks - once I'm in Automator and select Music, I don't see any options for finding Podcasts. Any suggestions which item/step I should select next in Automator? Thanks.

  • Apple Script For Opening External EML File With Apple Mail

    Hi folks,
    

 I am working with Apple Script for implementing numerous function related to Mail App.
    

I am using the following Apple Script lines for opening the mails which are in Mail app for each modes.
    

View Mode : open theMsg

    Reply View Mode : reply theMsg opening window yes

    Reply All Mode : reply theMsg opening window yes reply to all yes

    Forward Mode : forward theMsg opening window yes



    I want to know how we can open external eml file in different view modes (View, Reply, Reply All and Forward) using Apple Script or Apple Event programmatically with a similar mechanism available through script in Mail App.

    
Thanks in advance.

Regards
    
Nisar

    I'm not sure what you're doing here, but this isn't anything I recognize as compilable applescript. what is this 'mode' thing you're talking about.
    at any rate, if you have a loose emlx file sitting around somewhere you can simply open it in mail (use the 'open' command and the file specification for the emlx file) and work with it appropriately. if you're talking about an actual eml file (e.g. from Outlook Express) you'd have to GUI script Mail's 'import mailbox' command (the applescript handler for importing mail only works with Mail.app mailboxes)

  • Apple Script for indesign

    Hai all,
    i am trying to insert footnote and its contents for a particular xml element in "Adobe Indesign cs2" thru apple script. But i'm facing some problem. I'm able to select the xml element and its contents and i can insert footnote for that element and i can cut that contents but i couldn't paste this contents in footnote. I have tried with the following code:
    tell application "Adobe InDesign CS2"
    tell active document
    set theRoot to (item 1 of XML elements)
    end tell
    end tell
    myLoopLoop(theRoot)
    property myLoLoV : {}
    property myHoHoV : {}
    on myLoopLoop(myElement)
    tell application "Adobe InDesign CS2"
    tell active document
    set moreElement to every XML element of myElement
    repeat with x from 1 to (count of moreElement)
    set em1 to item x of moreElement
    select em1
    if (name of markup tag of em1 is "informalexample") then
    set em2 to em1
    select text of em2
    tell insertion point 1 of em1
    set myfootnote to make footnote
    end tell
    tell application "Adobe InDesign CS2"
    set myselection to selection
    cut (selection of active document)
    end tell
    tell application "Adobe InDesign CS2"
    tell insertion point 1 of myfootnote
    paste into myfootnote
    set text of em2 to myfootnote
    end tell
    end tell
    end if
    tell me to myLoopLoop(item x of moreElement)
    end repeat
    end tell
    end tell
    end myLoopLoop
    Can anyone help me out to sort this problem?
    Thanks
    anbu
    I Mac   Mac OS X (10.4.8)   Intel based Mac

    hi all
    any help
    thanks
    anbu

  • Apple script for QT

    In FCP you can scrub though a video in the viewer by 1 second intervals by holding shift + arrow key (left=back, right=forward). I really like this shortcut.
    Anyone have any script for QT to make it do the same thing?
    Apple should add it on the next version. It will be super helpful and better integrated with FCP.
    Blake

    Yes, but in FCP when you hit shift+arrow every time you hit the arrow it scrubs either 1 second forward or 1 backward. This is very helpful if I know I want a clip to start at and exact point and go for exactly 5 (6,9,25) seconds. I have to do this a lot in my work. In QuickTime it just moves you frame by frame, which is perfect for certain situations but I would really like to be able to do what I can do in FCP also.
    Blake

  • Searching for 1. power point App. and Corel draw App. or similar Apps.

    I couldn't find Microsoft power point App. and Corel draw App. So could anybody tell me if there's a similar Apps. for my I PAD?
    thanks a lot

    Have a look at the following (in my order of preference)
    http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
    http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
    http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1

  • AVI for PC Power Point

    I am trying to produce an AVI file for my PC client's Power Point and general use. Exporting from Final Cut Express as a DV/DVCPRO-NTSC progressive has given me a great file for my Mac, the client cannot view nor insert into PP.
    We have tried Sorensen Squeeze, converting to an AVI on a PC all with no or poor quality success. Is there a compression that will work cross platform that has excellent visuals, sound is turned off on this project.

    Timothy,
    MPEG1 is very compatible, with reasonable but not great compression. You will need something like ffmpegx to convert from Quicktime to MPEG1.
    Anything with better compression than this (MPEG4, Divx) and its difficult to guarantee compatiblilty.
    Or you could just do
    File > Export > Using Quicktime Conversion...
    Set Format to AVI
    Click Options
    Set Video Settings to Cinepak
    Adjust other factors to suit. Sound isn't needed (you mentioned) so unselect this.
    This gives big file sizes, but it will play on windows with even old versions of Media Player.

  • Satellite L650 - Update fails for Office power point 2007

    Hi,
    My L650 keeps failing to install a security update for Microsoft office power point 2007.
    Has failed 19times.
    Keep trying to install it when i switch off my laptop, but then show up as failed in 'review your update history'.
    Will not go away... the error is - code 80070643.
    What do i do.
    I don't even use pp 2007, i use the 2010 version.
    Thank you,
    Brent097

    Hmm dont know why you post this here in the Toshiba forum
    Its definitely not a Toshiba notebook issue but something wrong with your Office Package.
    I think you should uninstall the Office from the system.
    Clean the registry using CCleaner (you can use other tool if you know another better ;) ) and after several reboots you could install the whole Office package and could tart the update.
    There are also some documents posted by Microsoft regarding this error:
    Check this:
    +You receive error code 0x80070643 or error code 0x643 when you use the Windows Update or Microsoft Update Web sites to install updates+
    +http://support.microsoft.com/kb/958052/en-us+
    +You receive an "Error 80070643" error message when you try to update Office 2003 by using Software Update Services+
    +http://support.microsoft.com/kb/903772/en-us+

  • Can anyone make an Apple Script for me?

    I'm looking for an Apple Script so that when I press cmd+F1 on my Macbook Pro Retina it turns the brightness to 0 instantly. Rather than having to hold F1 down to make the brightness go down to 0.
    Is this something that is even possible?
    Thank You

    There is evidently no direct way to do this, but there is an indirect way:
    Download an app called SleepDisplay: Download SleepDisplay for Mac - Put your display to sleep instantly. MacUpdate.com
    put SleepDisplay in your Applications folder
    open Automator.
    Select service for type of document
    at the top, for service receives, select no input, and after in, any application
    in the column on the left, select Utilities
    in the next column, drag Launch Application over to the right, and select SleepDisplay for the app
    close the window with the red circle in the left upper corner, and give the service a name, like Dark.
    go to system preferences > keyboard > shortcuts
    select services in the box on the left, and scroll down in the box on the right until you find the service you just created. select that service.
    when you select it, a white oval should appear that says "add shortcut". Type in the shortcut you want to use. I couldn't get ⌘F1 to work, but control-option-⌘-D did work. It must be a unique shortcut, not already in use.

  • Apple script for 10.4 - works in OSX but not older

    Hi I have a script which I'm using on my current system 10.9 it runs in excel and it goes something like this:
    tell application "Microsoft Excel"
      -- put the complete set of data into a list of lists (i.e., 2 dimensions -> columns of rows)
      tell active sheet to set myData to value of used range
      -- recipient email
      set myRow1 to 1
      set myCol1 to 1
      set Address to item {myCol1} of item {myRow1} of myData
      -- recipient name
      set myCol4 to 4
      set rName to item {myCol4} of item {myRow1} of myData
    The above is just a small snippet from the script.  However I try running this on apple 10.4 apple script and it does not work.  I'm trying to save my computer time from have to this minimal task on an older mac I have but I'm experiencing some problems.  Does the active sheet not work in apple mac 10.4? What am I missing?  Any help would be greatly appreciated.

    Hi Ohms238,
    I found this Apple developer page that talks about changes made in each version of OSX. It will require some work, but you can go through and see what changes are relevant to your script.
    But I would actually recommend running pieces of your code separately to see exactly what parts don't work and then rewrite just those portions.

  • Apple Script For Printers

    Hello there. How do I create an apple script that switches between the default printers? I am using 9.2.2. I am not familar with apple scripts in OS9. Thanks

    Try starting with the script posted on this page.
    (15380)

  • Can anybody fix this apple script for me so all the responses work

    iv been working on a jarvis wake up script and iv continued to add on commands to if theResponce parts of the script but now most of them wont work and i get a syntax if i dont have like 8 end if's at the end of the script could somebody please overview it, fix the script and resubmit it to me in the comments. will be so grateful if somebody fixes this pleasee.!!!!
    set theHours to hours of the (current date)
    if theHours > 18 then
              say "good evening sir"
    else if theHours > 12 then
              say "good afternoon sir"
    else if theHours > 6 then
              say "good Morning sir"
    else if theHours > 0 then
              say "get out of bed sir!"
    end if
    say "It is " & getTimeInHoursAndMinutes() using "Tom"
    on getTimeInHoursAndMinutes()
              set timeStr to time string of (current date)
              set Pos to offset of ":" in timeStr
              set theHour to characters 1 thru (Pos - 1) of timeStr as string
              set timeStr to characters (Pos + 1) through end of timeStr as string
      -- Get the "minute"
              set Pos to offset of ":" in timeStr
              set theMin to characters 1 thru (Pos - 1) of timeStr as string
              set timeStr to characters (Pos + 1) through end of timeStr as string
      --Get "AM or PM"
              set Pos to offset of " " in timeStr
              set theSfx to characters (Pos + 1) through end of timeStr as string
              return (theHour & ":" & theMin & " " & theSfx) as string
    end getTimeInHoursAndMinutes
    set CityCode to 1098081
    set t_format to "C"
    set v_format to "S"
    set a_format to "Y"
    set IURL to "http://weather.yahooapis.com/forecastrss?w=" & CityCode
    set file_content to (do shell script "curl " & IURL)
    --looking for the line with actual condition
    set theText to text ((offset of "yweather:condition" in file_content) + 1) thru -1 of file_content
    set sub_1 to text ((offset of "\"" in theText) + 1) thru -1 of theText
    set actual_condition to text 1 thru ((offset of "\"" in sub_1) - 1) of sub_1
    set sub_1a to text ((offset of "temp=" in sub_1)) thru -1 of sub_1
    set sub_1b to text ((offset of "\"" in sub_1a) + 1) thru -1 of sub_1a
    set actual_temp to text 1 thru ((offset of "\"" in sub_1b) - 1) of sub_1b
    if t_format is equal to "C" then
              set actual_temp to (5 / 9) * (actual_temp - 32) as integer
    end if
    set theText to text ((offset of "yweather:forecast" in file_content) + 1) thru -1 of file_content
    set sub_2 to text ((offset of "\"" in theText) + 1) thru -1 of theText
    set today_min_temp to word 9 of sub_2
    set today_max_temp to word 12 of sub_2
    if t_format is equal to "C" then
              set today_min_temp to (5 / 9) * (today_min_temp - 32) as integer
              set today_max_temp to (5 / 9) * (today_max_temp - 32) as integer
    end if
    set sub_3 to text ((offset of "text" in sub_2) + 1) thru -1 of sub_2
    set sub_4 to text ((offset of "\"" in sub_3) + 1) thru -1 of sub_3
    set today_forecast to text 1 thru ((offset of "\"" in sub_4) - 1) of sub_4
    set sub_5 to text ((offset of "yweather:forecast" in sub_4) + 1) thru -1 of sub_4
    set sub_6 to text ((offset of "\"" in sub_5) + 1) thru -1 of sub_5
    set tomorrow_min_temp to word 9 of sub_6
    set tomorrow_max_temp to word 12 of sub_6
    if t_format is equal to "C" then
              set tomorrow_min_temp to (5 / 9) * (tomorrow_min_temp - 32) as integer
              set tomorrow_max_temp to (5 / 9) * (tomorrow_max_temp - 32) as integer
    end if
    set sub_7 to text ((offset of "text" in sub_6) + 1) thru -1 of sub_6
    set sub_8 to text ((offset of "\"" in sub_7) + 1) thru -1 of sub_7
    set tomorrow_forecast to text 1 thru ((offset of "\"" in sub_8) - 1) of sub_8
    if a_format is equal to "Y" then
              say "The current conditions in Perth are " & actual_condition & " ,and the current temperture is " & actual_temp & " degrees"
    end if
    if v_format is equal to "L" then
              say "Today it will be : " & today_forecast & ". Temperature: between " & today_min_temp & " and " & today_max_temp & " degrees .
              Tomorrow we are expecting it to be: " & tomorrow_forecast & ". Temperature: between " & today_min_temp & " and " & today_max_temp & " degrees " using "Tom"
    else
              say "Today it will be : " & today_forecast & ", between " & today_min_temp & " , and " & today_max_temp & " degrees .
               Tomorrow we are expecting it to be: " & tomorrow_forecast & ", between " & tomorrow_min_temp & " ,and " & tomorrow_max_temp & " degrees " using "Tom"
              say "will that be all sir?"
              tell application "SpeechRecognitionServer" to set theResponse to listen for {"get my mail ", "yes", "notes", "repeat", "Music", "Sleep in"}
              if theResponse is "Sleep in" then
      delay 6
                        say "Time to get up sir,or you will be late"
                        tell application "SpeechRecognitionServer" to set theResponse2 to listen for {"Ok pat im getting up"}
                        if theResponse2 is "Ok pat im getting up" then
      set volume 35
                                  tell application "iTunes"
                                            set the sound volume to 0
      play user playlist "Wake up"
                                            repeat 10 times
                                                      if sound volume is less than 40 then
                                                                set sound volume to (sound volume + 10)
                                                                delay 2
                                                      end if
                                            end repeat
                                  end tell
                                  if theResponse is "Music" then
      set volume 20
                                            tell application "iTunes"
                                                      set the sound volume to 0
      play user playlist "Wake up"
                                                      repeat 10 times
                                                                if sound volume is less than 60 then
                                                                          set sound volume to (sound volume + 10)
                                                                          delay 2
                                                                end if
                                                      end repeat
                                            end tell
                                            if theResponse is "yes" then
                                                      delay 1
                                                      set theOptions to {"very good, sir, have a nice day"}
                                                      set theChoice to some item of theOptions
      say theChoice displaying theChoice with waiting until completion
                                            end if
                                            if theResponse is "get my mail " then
                                                      tell application "Mail" to launch
                                            end if
                                            if theResponse is "notes" then
                                                      tell application "Stickies" to launch
                                            end if
                                            if theResponse is "repeat" then
                                                      set CityCode to 1098081
                                                      set t_format to "C"
                                                      set v_format to "S"
                                                      set a_format to "Y"
                                                      set IURL to "http://weather.yahooapis.com/forecastrss?w=" & CityCode
                                                      set file_content to (do shell script "curl " & IURL)
      --looking for the line with actual condition
                                                      set theText to text ((offset of "yweather:condition" in file_content) + 1) thru -1 of file_content
                                                      set sub_1 to text ((offset of "\"" in theText) + 1) thru -1 of theText
                                                      set actual_condition to text 1 thru ((offset of "\"" in sub_1) - 1) of sub_1
                                                      set sub_1a to text ((offset of "temp=" in sub_1)) thru -1 of sub_1
                                                      set sub_1b to text ((offset of "\"" in sub_1a) + 1) thru -1 of sub_1a
                                                      set actual_temp to text 1 thru ((offset of "\"" in sub_1b) - 1) of sub_1b
                                                      if t_format is equal to "C" then
                                                                set actual_temp to (5 / 9) * (actual_temp - 32) as integer
                                                      end if
                                                      set theText to text ((offset of "yweather:forecast" in file_content) + 1) thru -1 of file_content
                                                      set sub_2 to text ((offset of "\"" in theText) + 1) thru -1 of theText
                                                      set today_min_temp to word 9 of sub_2
                                                      set today_max_temp to word 12 of sub_2
                                                      if t_format is equal to "C" then
                                                                set today_min_temp to (5 / 9) * (today_min_temp - 32) as integer
                                                                set today_max_temp to (5 / 9) * (today_max_temp - 32) as integer
                                                      end if
                                                      set sub_3 to text ((offset of "text" in sub_2) + 1) thru -1 of sub_2
                                                      set sub_4 to text ((offset of "\"" in sub_3) + 1) thru -1 of sub_3
                                                      set today_forecast to text 1 thru ((offset of "\"" in sub_4) - 1) of sub_4
                                                      set sub_5 to text ((offset of "yweather:forecast" in sub_4) + 1) thru -1 of sub_4
                                                      set sub_6 to text ((offset of "\"" in sub_5) + 1) thru -1 of sub_5
                                                      set tomorrow_min_temp to word 9 of sub_6
                                                      set tomorrow_max_temp to word 12 of sub_6
                                                      if t_format is equal to "C" then
                                                                set tomorrow_min_temp to (5 / 9) * (tomorrow_min_temp - 32) as integer
                                                                set tomorrow_max_temp to (5 / 9) * (tomorrow_max_temp - 32) as integer
                                                      end if
                                                      set sub_7 to text ((offset of "text" in sub_6) + 1) thru -1 of sub_6
                                                      set sub_8 to text ((offset of "\"" in sub_7) + 1) thru -1 of sub_7
                                                      set tomorrow_forecast to text 1 thru ((offset of "\"" in sub_8) - 1) of sub_8
                                                      if a_format is equal to "Y" then
                                                                say "The current conditions in Perth are " & actual_condition & " ,and the current temperture is " & actual_temp & " degrees"
                                                      end if
                                                      if v_format is equal to "L" then
                                                                say "Today it will be : " & today_forecast & ". Temperature: between " & today_min_temp & " and " & today_max_temp & " degrees .
              Tomorrow we are expecting it to be: " & tomorrow_forecast & ". Temperature: between " & today_min_temp & " and " & today_max_temp & " degrees " using "Tom"
                                                      else
                                                                say "will that be all sir?"
                                                                tell application "SpeechRecognitionServer" to set theResponse3 to listen for {"get my mail ", "yes", "notes", "Music"}
                                                                if theResponse3 is "Music" then
                                                                          set volume 20
                                                                          tell application "iTunes"
                                                                                    set the sound volume to 0
                                                                                    play user playlist "Wake up"
                                                                                    repeat 10 times
                                                                                              if sound volume is less than 60 then
                                                                                                        set sound volume to (sound volume + 10)
                                                                                                        delay 2
                                                                                              end if
                                                                                    end repeat
                                                                          end tell
                                                                else
                                                                          if theResponse3 is "get my mail " then
                                                                                    tell application "Mail" to launch
                                                                          end if
                                                                          if theResponse3 is "yes" then
                                                                                    delay 1
                                                                                    set theOptions to {"very good, sir, have a nice day"}
                                                                                    set theChoice to some item of theOptions

    What you do in this situation, is split the file into parts. 
    Start with:
    set theHours to hours of the (current date)
    if theHours > 18 then
              say "good evening sir"
    else if theHours > 12 then
              say "good afternoon sir"
    else if theHours > 6 then
              say "good Morning sir"
    else if theHours > 0 then
              say "get out of bed sir!"
    end if
    Add in a few lines of code to this file and see what happens. 
    add the on run, this would be clearer.  It is the default on unit to run.
    on run
        set theHours to hours of the (current date)
        if theHours > 18 then
            say "good evening sir"
        else if theHours > 12 then
            say "good afternoon sir"
        else if theHours > 6 then
            say "good Morning sir"
        else if theHours > 0 then
            say "get out of bed sir!"
        end if
    end run
    Now, it is time for debugging.
    It is easier to diagnose problems with debug information. I suggest adding log statements to your script to see what is going on.  Here is an example.
        Author: rccharles
        For testing, run in the Script Editor.
          1) Click on the Event Log tab to see the output from the log statement
          2) Click on Run
    on run
        -- Write a message into the event log.
        log "  --- Starting on " & ((current date) as string) & " --- "
        --  debug lines
        set desktopPath to (path to desktop) as string
        log "desktopPath = " & desktopPath
    end run

  • Apple script for print que???

    I was wondering if anyone knew of an Applescript or third-party software for the print que in OS 10.4 that will allow me to see what application the completed files were printed from.
    Thank,
    John
    733mhz Quicksilver upgraded to 1ghz processor, 40gig Maxtor HD   Mac OS X (10.3.8)  

    You may be able to adopt this script:
    on open dropped_items
       -- Write a message into the event log.
       log "  --- Starting on " & ((current date) as string) & " --- "
       -- set see to alias "Macintosh-HD:Users:mac:Desktop:app.html"
       -- set dropped_items to {see}
       set the_app to "Safari"
       repeat with dropped_item_ref in dropped_items
          --set UrlBase to "xzzx FILE://" & POSIX path of dropped_item_ref
          --display dialog UrlBase
          -- Activate
          activate application the_app
          -- Open the URL 
          tell application the_app
             open dropped_item_ref
             -- print dropped_item_ref
             tell application "System Events"
                tell process the_app
                   delay 3
                   -- click menu item "Print..." of menu "File" of menu bar 1
                   keystroke "p" using command down
                   delay 1
                   keystroke return
                   delay 10
                   keystroke "w" using command down
                end tell
             end tell
             --quit
          end tell
       end repeat
    end open

  • Apple script for contacts?

    iPhone does not search anything besides first name, last name & company in contacts.
    Since I dont always remember people's name, I want to search for them using job title or even text in their notes.
    Is there any solution I can search completely in contacts, one solution I worked out is to export all contacts from Address Book as lists in pdf format & copy that pdf to Dropbox - I need Applescript to automate this every week?
    Any help?

    With this script you can search for all fields of address book.
    The result is going to be posted to the clipboard.
    Make your own modifications !
    tell application "Finder" to set mycontainer to container of (path to me) as text
    set scriptlib to load script (mycontainer & "_hubionmac's AddressBook-scripts-lib.scpt") as alias
    tell scriptlib
    run
    set these_fields to getfield2process("Which field I should check?", "ShowAll", false)
    set unique_list to {}
    repeat with this_person in getitem_2process()
    repeat with this_field in these_fields
    repeat with a in getValueList(this_field, this_person)
    if a is not in unique_list then
    set unique_list to unique_list & a
    end if
    end repeat
    end repeat
    end repeat
    set AppleScript's text item delimiters to return
    set unique_list to unique_list as text
    set AppleScript's text item delimiters to ""
    set the clipboard to unique_list
    display dialog "All values of field \"" & these_fields & "\" in clipboard" giving up after 4
    end tell
    This script was borrowed from:
    http://www.macupdate.com/info.php/id/33894/hubi's-address-book-scripts

Maybe you are looking for

  • Vendor return delivery for excisable goods

    Hi, I have few queries regarding vendor return delivery of excisable items. 1) MIGO is done- Part 1 is done     J1IEX_P- Part 2 is done.    MIRO is done/not done. 2) MIGO is done-Part 1 is done.     J1IEX is not done.     MIRO is not done. 3) In case

  • Show clients ASA 5505

    Hi, I have a question about our Cisco ASA 5505. It is installed at a customers network and it has a license for 50 clients. The problem is that they were yesterday with more than the 50 devices and wanted to go on the Internet. This caused that some

  • Connecting to Oracle After installing D2K - V.20 on an Oracle 8.1.5

    I can not connect to Oracle. I have forms in Drive C: and oracle 8.15 in drive D: Oracle Path: D:\Oracle\Ora81 Forms Path: C:\Forms5 They have to diferent home Paths in the Registry. Now the registry has 2 sets of folders. For Oracle: Oracle\All_home

  • Please help i want my music back

    how come when a colleague at work put itunes on her comp (we are on a network) it deleated my library and now she has got all my songs and i have nothing!! how can i get them back!! please help

  • Can make iBook without previewing in iPad

    hi, can I make an iBook by using iBook Author without having an iPad only on iMac, if it is possible let me know how I have to make an iBook but I don't have iPad to preview it and I am having problem, is there any other way please tell me. thanks