Apple Service Diagnostic error code 12105

2.6 Core i7
8GB RAM
750 HD
OS 10.9.2
Had SMART Status Failure. Sent in for repair. Returned with new HD, new RAM and new Front Bracket/Top Case.
Imaged machine with our standard image we use. Booted fine. User came to pick up machine and upon startup got flashing folder icon with "?"
Tried Option booting to see if it would load that way, didn't even show Mac HD. Removed HD from machine and booted using our toaster and it shows up in Disk Utility and in Finder, User folders, System folder and all.
Reimaged HD again. Same result.
Ran ASD on machine and it failed with the following :
ERROR -12105 PCI driver IOService open error
Wanting to know if there is anything else to try before I send it back in to Apple.
Thanks all

Hi,
I have a MacBook Pro with the same error. Can you help me ? Did they fixed yours ? What was the problem ?
Look forward in your reply
Thank You

Similar Messages

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

The motor on the exhaust fan has failed or is failing.

What are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

what are the meanings of Apple Hardware Test error codes 4m0t/4/40000003:hdd-1300 and 4m0t/4/40000003:hdd-1308?

Thanks - Even though I'm years out of warranty I got chat help from Apple (I said they should help me since the codes aren't published.) We covered three different questions, and although I didn't get a specific decoding of the error code, I got confirmation of what other comments here imply - it might have helped that I indicated I'd already been here - and useful links to how to do back ups, including to CD(s). (I don't have a lot of data on this computer yet)
Now I need to figure out how to decide how hot-to-the-touch is "too hot" for the metal frame at the top of the iMac to decide whether I'm getting adequate fan performance or insufficient. While chatting I initially reported it was cool at the bottom and warm at the top. Apple hadn't asked, but their response prompted me to feel it again, and I'd say the top was hot, not warm - I updated but Apple didn't comment further except to conclude after addressing the other questions that I should take it in for further assessment - don't really want to bother with that.

Service-specific error code 997 when starting up Oracle 9i service

Hi,
I have both Oracle 9i and 10g installed in a server. I've added 9i SID in 10g listner.ora. When I try to startup the 9i Oracle service in windows, I get "Windows could not start the 'service name' on Local Computer......If this is a non microsoft service, contact the service vendor, and refer to service-specific error code 997".
Server is Windows 2003 R2 Standard Edition SP1
Does anyone has a solution for this error?
Thanks,
listener.ora in 10g
LISTENER10G =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = sgpdb1)(PORT = 1522))
SID_LIST_LISTENER10G =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = RACE)
(ORACLE_HOME = F:\Oracle\Ora10.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IWK1010)
(ORACLE_HOME = F:\Oracle\Ora9201)
(PROGRAM = extproc)
sqlnet.ora in 10g
NAMES.DEFAULT_DOMAIN = world
SQLNET.AUTHENTICATION_SERVICES= NONE
NAMES.DIRECTORY_PATH= (TNSNAMES,EZCONNECT)
tnsnames.ora in 10g
RACE.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(Host = sgpdb1)(Port = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACE)
IWK1010.WORLD =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = SGPDB1)(PORT = 1522))
(CONNECT_DATA =
(SERVICE_NAME = IWK1010)
)

Here is the resutls. Pls note - startup/exit commands were not executed since did not connenct to sqlplus
C:\Documents and Settings\Administrator>lsnrctl start
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:03:54
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Log messages written to F:\Oracle\Ora10.2.0\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 0 min. 4 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Documents and Settings\Administrator>sqlplus / as sysdba
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Apr 13 12:05:16 2011
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12560: TNS:protocol adapter error
C:\Documents and Settings\Administrator>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:09:59
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date 13-APR-2011 12:03:56
Uptime 0 days 0 hr. 6 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File F:\Oracle\Ora10.2.0\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=sgpdb1.corpnet.ifsworld.com)(PORT=1521)))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrator>lsnrctl service
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 13-APR-2011 12:10:08
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "RACE_XPT" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "race" has 1 instance(s).
Instance "race", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully

How to Download ASD Apple Service Diagnostic

Hi
I have a power mac G5 ( Juin 2004 ) 2X2 Ghz , 8 Go memory , I changed two processors
i need ASD Apple Service Diagnostic to calibrate my CPU Temperature and FANS Speed
How can i get ASD Apple Service Diagnostic CD or DVD freely
Thanks

Hi
Please , help me !
I need this ASD 2.5.8 , ( 2.5.7 ) image disk to repair my computer
Thanks
<E-mail Edited by Host>

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Do the fans speed up when running Apple Service Diagnostic?

When i run apple service diagnostic cd (2.5.8) the fans really speed up and don't slow down so after a few minutes i stop the testing, is this normal?. It seems like it is the rear fans that are going full speed, can't tell if any of the other fans are speeding up or not, i stop the testing after a few minutes as i don't know if this is normal or not and don't want to cause any damage.

Unless you bathe the computer in helium gas, I doubt if the fans will run faster than their designed speed even full bore.
The helium gas relates to a war story told by my motors and transformers prof "way back when" of a cooling fan in a nuclear facility where the atmosphere in the containment vessel was helium for whatever reason. The fan was powered by a universal motor which had nameplate voltage applied to it. The thing that limits the universal is turning resistance, and helium, being less dense in that environment, provided much less resistance to the fan blades, thus allowing the fan to overspeed and then disintegrate from the resulting centrifugal force. From that, I learned that interdisciplinary engineering teams really do need to talk to each other on a constant basis. Plus, I guess I learned a valuable lesson if I ever decided to build my backyard nuke.

Apple Service Diagnostic/Kernel panic

I'm trying to boot into the Apple Service Diagnostic that came with AppleCare training but as it is reading from the disk I always get a kernel panic. Any ideas?

Contact AppleCare or boot with the Apple Hardware Test disc and run the extended tests. Also, see:
What is a kernel panic,
Technical Note TN2063: Understanding and Debugging Kernel Panics,
Mac OS X Kernel Panic FAQ,
Resolving Kernel Panics, and
Tutorial: Avoiding and eliminating Kernel panics for more details.

Apple Service Diagnostic 2.5.8

Apple Service Diagnostic 2.5.8
anyone have a good image of this. I need asap.

Looky here:
http://macosx.blog.co.in/2008/10/03/apple-service-diagnostic/

Apple Service Diagnostic 2.5.8 help

I downloaded ASD 2.5.8 and burned the image to disc. I restart and hold the "c" button down, and nothing happens. Is there any other way I can run ASD besides the holding down "c" option? I believe I have the respective version of ASD for my powermac G5 early 2005. Any help is appreciated.
Also im using a non-apple wireless keyboard set-up. Could that be the issue?
Message was edited by: Dubez

Wireless keyboards aren't recognized early enough in the boot process to select your startup dis.
Also, I believe that you need to be holding down the option key (normally the same as the alt key if you're using a PC keyboard) to get the boot menu. It usually takes some time before it'll show all the boot choices, including the Apple Service Diagnostic tests.

Apple Service Diagnostic Test

Hi,
I performed hardware and software tests using Apple Service Diagnostic Test (it's similar to Apple Hardware Test but more advenced) and I want to save (and print) the results.
Is anyone here familiar with that kind of tests and know how to save the results?
It seems to be pretty straightforward but I can't find it
Cheers.

Welcome to the Apple Support Communities
If your graphic card is failing, take the Mac to an Apple Store to get your Mac repaired. Unfortunately, that graphic is soldered to the logic board, so the whole logic board will be replaced

Apple service diagnostic discs for the Mac Pro 2010

Where can i find the apple service diagnostic discs (ASD) or especially the thermal calibration tool for the Mac Pro 2010?
Thanks
ffder1.

AppleCare Help Desk Tools - Apple Store (U.S.)

HT201210 Iphone 5 repeating apple logo. Error Code 2001.

Iphone 5 just went blank overnight. Won't boot up, simply displays apple logo on and off repeatedly.
Tried Recovery mode and all the steps from apple. Itunes will not restore it but gives the Error code 2001.
Help!

This error could also be hardware related:
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware.
If you already tried these steps, you should get it serviced:
iPhone - Contact Support - Apple Support

Apple Hardware Test Error Code " 2STH/1/2:CPU A AD7417AD1 "

Hi All,
I have a G5 2.5 GHz dual processer that seems to work fine after 14 months. But when I run the Apple Hardware Test, I get the error message listed in my subject above. I talked to Apple and took the machine in for service. Servicer said get the latest upgrade of the AHD and try it instead of one that came with my machine. After some work (a good bit), I got Apple to send me the upgrade and when I run it, I still get the same error code! Does anyone have any suggestions? I could sure use them. Thanks,
Chuck
Powermac G5 Mac OS X (10.3.9)
Powermac G5 Mac OS X (10.3.9)
Powermac G5 Mac OS X (10.3.9)
Powermac G5 Mac OS X (10.3.9)

Although you do not have any symptoms(?) the same error was cause for concern here
http://discussions.apple.com/thread.jspa?messageID=598444&#598444

Windows 2012 R2 hyper-v integration services update - error code: 50

Physical Host is a brand new Windows 2012 R2 with hyper-v role, VM is a Windows Server 2012
I try to upgrade the integration services update, VM become unresponsive and I lost connection to it, had to turn it off, afterwards it wouldn't boot.
Tried F8 on the reboot and then switched to the command prompt to manually upgrade the integration services running the setup, but got an error (Error code: 50 )
VM halts in the middle of booting up.
saying: Please wait ...
Anyone has any idea why it happened and how to fix this?

Hi Seyed,
Please try to follow the link below to install integration services manually :
http://blogs.technet.com/b/virtualization/archive/2013/04/19/how-to-install-integration-services-when-the-virtual-machine-is-not-running.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Apple Service Diagnostic error code 12105

Similar Messages

Maybe you are looking for