Apple sez cannot repair audio jack in new gen Ipod Classic 160 GB

Will sell me a new one at half price, 13 months after purchase: $160, not much more that the diagnostic fee. But if Apple thinks I will buy another Ipod Classic from them they are much mistaken. (I have a nano from 6 years ago that still works great, so I know that I am not the issue as far as looking after the gear. Apple support will not tell me when/if the assembly changed, so I can try to fix it. I mean, what can I lose?  Does anyone know? Anyone been through the same thing and can offer any advice except for pay the fee. Unsustainable to operate with one of the two CRUCIAL parts and purposes for an IPOD is weak AND irreplaceable. Thank you.

Start with:
Service Answer Center - iPod
Find answers to all your questions about service options, warranty, pricing, and other processes in your country.
Apple - Support - Service Answer Center 

Similar Messages

  • Has Apple addressed poor sound quality issues with new 160GB iPod classic?

    I just bought a new 160GB iPod classic, replacing a perfectly good 80GB iPod Video (5.5), thinking that the newer one would be superior to my 3 year old model. I discovered that the sound of the new unit was flat and muddy compared to the older model. I found that the 5th gen iPod video was more "spacial", if that's an appropriate word to use; the bass was more present and more clearly defined, as was the rest of the sonic spectrum. I searched several forums to research this issue and while there were numerous references to this issue, all of the posts I found referred to the original iPod classics (80GB and 160GB) and not the later 120GB classics nor the new 160GB classics like the one I bought. Has Apple done anything to address this issue since the first classics were released or are the new ones still suffering from the same sound quality issues as the original classics?

    Based on your observations here, they apparently have not changed the sound quality since the original 160GB classic. I noticed a clear narrowing of the sound stage (ambiance) between the 5.5G 80Gb and my 6G 160GB. You're describing the same characteristic. I don't own the newest 160GB version and came here today to see if it might have improved the sound quality back to the 5.5 spaciousness. Note that the 5.5G has a higher signal to noise ratio than the 6G, making it difficult for me to enjoy it through efficient balanced armature in ear monitors like the Shure SE530s or Ulimate Ears Triple.Fi 10s.

  • I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
    Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
    If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
    http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
    That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.

  • I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

    I could use Ipod Classic (30g) controls with connection to Highlander (adapter plug into JBL single CD player), but cannot with new 160g Ipod Classic. What gives?

    Charge it up fully. Toggle the hold switch. Try getting into diagnostics mode again. See Corrupt iPod classic.
    tt2

  • Ipod Classic 160 6th g. doesn't sync w/Imac g5 non intel OS 10.4.11. This is a replacement for same ipod which was stolen recently. That pod worked fine with Itunes 9! Now this pod says it only works with Itunes 10.7. ***!!!! Why has Apple screwed up?

    My ipod classic 160 6th gen. was recently stolen. It had 3000 tunes on it and it synced perfectly with Itunes 9 on my Imac G5 non intel OS 10.4.11. So I recently bought same model and guess what, it doesn't sync at all. Now message says it only works with Itunes 10.7 and up. I certainly cant afford to buy a new intel based Mac and I really dont need a new pc. It feels like Apple has dropped the ball on its long time users and tough luck to you and all the $$$$$$$ spent on downloading songs and buying ipods over the years! I AM SO ANGRY THAT I CANNOT BRING MY MUSIC WITH ME ANYMORE. I dont know if there is any solution to this except being extorted to upgrade to new tech! I have been trying to get answers to this issue but nothing seems to work. Any help would be greatly appreciated. I am not a tech genius so extremely techy solutions will be in vane.

    one more detail, after a restore, when I attempt to reload music to the ipod, if I try and move, say, 20 files, the transfer seems to work as it should but then stalls on the last file.  Eventually, the status will change to "Updates Files on (my ipod)" a and suggests the iPod is syncing  even though I have the auto sync feature turned off.
    This process eventually works itself out, and seems to take longer relative to the number of files I attempt to transfer.   Once done, howver, if I try and eject and dismount the iPod, iTunes stalls with the spinning pinwheel and I am warned that the iPod is syncing again with the spinning candy cane status bar.     Eventually thisd works itself out and the iPod dismounts from iTunes and the desktop and eventually the iPod is free to disconnect.
    Then if I try and play the music I just transfered, the iPod says there is no music loaded.
    Ideas?

  • Suspicous HD sound on new 160GB iPod Classic

    Hi there,
    yesterday I bought one of the new 160GB iPod Classic to replace my old iPod Photo. After loading some music I noticed that the harddrive is really loud and makes disturbing sounds (spinning, clicking and chattering, obviously HD sounds) whenever I switch to the main menu or start playing albums.
    Ok, I know that Hard drives do make noises while operating but what disturbs me is the volume. You can hear it even when the iPod is lying on a table one meter away and it is considerably louder than my iMacs working volume for example. In comparison my 4 year old iPod Photo is really silent, I have to put the iPod to my ear to hear the HD sound - the only times I heard a HD sound of this kind is whenever my old iPod froze/the HD crashed and I had to reset it. So whenever my Classic starts to spin its HD I think it's gonna freeze/crash and it freaks me out.
    I contacted Amazon (where I bought it) and they told me that HD drive noises are normal and that I should contact Apple.
    So, is this normal or a case in which I should try to get a replacement from Apple?

    Amazon kept claiming that this ipod HD is not defective, still I returned the iPod to them using my right to return any item within 14 days of purchase. With the refund I walked to a local electronics market and bought their last iPod Classic 120GB (with a 25% discount).
    Now the sound difference becomes even more obvious to me. The 120GB's HD is considerably more silent than my former 160GB (no high pitch, you can't hear the HD spining unless you put it to your ear, the HD clicks is not lounder than pressing the click wheel). The iPod I originally got must have been a flawed one. I can't imagine that Apple unleashes such an unconvenient product on its customers as a regular item. I'm eager to know if more buyers of the new 160GB complain about the HD sound and if a production flaw (?) of new HD modell is repsonsible for it.

  • Can I use my old accessories for a 40GB (4G) iPod with new 160GB iPod Classic?

    I just purchased a 160GB (7G) iPod Classic. I had been using a 40GB (4G) iPod.
    The male connectors on  the accessories I used with my 40GB iPod seem to fit into the female connector on my new 160 GB. So, I am wondering if I can use these old accessories with my new 160GB iPod Classic. The old accessories I used with my 40GB (4G) iPod are as follows.
    1) Wall charger made by Apple. It has a firewire connection at one end of the charger cord which connects to  the small white plastic box of the charger that plugs into the wall. The other end of the charger cord seems to fit my iPod 160GB Classic.
    2) Dock made by Apple. It uses a firewire connection cord to my computer, in contrast to the USB connection cord that came with my 160GB iPod Classic.
    3) Car chargers that worked with my old 40GB, 4G  iPod. The car charger connectors seems to fit my new 160GB iPod Classic. One car charger is made by Apple. The other is not made by Apple.
    So, could you please tell me if I can use any or all of these old accessories with my new 160GB Classic without damaging it.
    Thanks.
    Richard

    No.
    Stedman

  • New 160Gb ipod classic will not be see in in Itunes V11.3.1(2)

    I bought a new 160Gb Ipod classic. I bought it because my previous 2, older ipod classics, stopped syncing. One day they worked the next they didnt. I swear this happened after an Itunes update too. Anyway, I took one to Tekserve (local Apple service provider) and they told me one of the pins in the ipod i brought to them was damaged so the connection couldnt be made. I didnt really buy the answer, but since the ipod was older i figured, ok, I'll get a new one. Well I just got a new one. opened up the box, took out a new USB cord, plugged it into my computer and boom, NOTHING. The computer recognizes it in the Finder (MAC OS 10.6.8). Then again the MAC recognized my other 'broken' ipods too, Itunes just doesnt.
    So I had hunch before this this problem has to be a software bug. Now its confirmed. There is no way a brand new ipod should not be seen in Itunes. Trust me i tried all the normal 'Ipod doesnt sync support stuff' and it doesnt  solve the problem. This is an advanced problem and one that i need  real answer on. Does an ipod classic work with Itunes  V11.3.1(2) running on a MAC 10.6.8 OS? Ipod classics still cost $250 which is ridiculous since the technology is 5 years old, so if Apple stopped supporting them on the new Itunes without making that know I think there should be some serious press about this!
    Please help.

    Well I finally figured out the problem, not thanks to anyone from Apple for that matter. You would asume this problem has happened before and is still happening. The problem was I couldn't copy certain songs anymore from iTunes to my iPod Classic. When trying to copy certain songs I got an error.
    If you have this problem it means your song file is corrupted. You can simply check this by trying to copy it from your hard drive to an external hard drive. Here you will also get an error message.
    This means you need to replace all the corrupted files by a back up on your hard drive or download it again. I did this and now everything works fine.
    Hope this will solve a lot of problems.

  • Brand new iPod classic 160 gb won't show up in iTunes devices

    Brand new iPod classic 160 gb won't show up in iTunes devices. The iPod is fully charged, iTunes reckonises my iPod touch, iPad, iPhone 3G and iPhone 4, but not the iPod classic, although it says the iPod is connected it doesn't register in iTunes.

    I purchased a new iPod Classic 160 GB in August 2013 and it (the iPod Classic device) would not show in iTunes though it did show in the Apple Finder. I tried EVERYTHING numerous times including resetting the iPod, updating iTunes and trying everything in the book and in on-line tips. Nothing worked and I was about to give up when I tried using the Apple iPod Classic cable that actually came in the iPod Classic box. It worked!!! Conclusion? Dont just use any old Apple cable eg. from a iPhone or whatever; TRY the USB cable that came with your iPod Classic!!! I have 2009 iMac with the latest Mac OS BTW.

  • "This game cannot be launched error" iPod Classic 160 Gb

    I have an iPod Classic, 160 Gb. I purchased Sudoku from the iTunes store.
    The game downloaded to my computer; and it shows in the iPod Games tab.
    It appears to sync to the iPod, but in the iPod's games menu there is no icon for the game (just the black and white dice). When I try to play the game, I get the "This game cannot be launched error" with the prompt to reinstall the game.
    Are there any fixes for this? I've tried all the troubleshooting in the support docs, and nothing seems to work.

    Thanks for your suggestions; however none of them worked.
    I contacted technical support, and the only suggestion they had for me was to request a refund - because for some reason, unknown to them, the game doesn't work on my iPod.
    I'm not generally a ranter - I try to be polite to people, in person, on the phone, online - wherever, but I have to say that in my experience, Apple seems to have the worst support of any company with which I have ever dealt.
    After being told no less than eight times, by five different representatives from iTunes support, I was referred to technical support, who told me in essence, "tough cookies" (although the representative certainly didn't say that, he was quite polite).
    I had to double check that I was talking to "technical" support.
    I've been a faithful iPod user for many years; but this experience has certainly soured me. I will have to think long and hard before buying another Apple product if the support I have experienced is indicative of a typical support instance.
    Thanks again for your suggestions.

  • Should an older (2007) camera connector be compatible with a new generation ipod classic?

    Should an older (2007) camera connector be compatible with a new generation ipod classic?

    This is probably the type of adapter you would need to go from the Thunderbolt port (also has MiniDisplayPort support) on the back of any new Thunderbolt capable iMac to the Cintiq 20wsx.
    http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA3Ng
    You can download the Lion compatible drivers from:
    http://www.wacom.com/CustomerCare/Drivers.aspx?model=Cintiq+20WSX&os=Mac+OS+X

  • New iPod Classic 160 GB not read by MacBook

    My new iPod Classic 160 GB is not read by my MacBook.  It doesn't show up in Finder or in iTunes.  What can I do so my computer recognizes it?

    Swap to another USB 2.0 port and dont use any USB HUB. (only one of the Macbook USB port can be use for iPod Classic)
    If that doesn't work, use another  USB cable.
    When you connect to the Macbook USB port, the iPod screen should show this symbol.
    Battery charging (lightning bolt
    or
    If you get just the menu screen, it means there is no signal or power coming across the cable from the Macbook to the iPod.

  • Will charger that comes with iPhone 3GS charge my new iPod classic 160?

    I have an iPhone 3GS; which comes with a charger. I recently purchased a new iPod classic 160; which doesn't come with a charger.
    Will the iPhone charger charge my iPod without damaging it?
    It appears to work (shows it's charging), but I want to make sure they're compatible.
    Thanks.

    Yes, I have the same question- the old classic came with the charger (the rectangular white one). We travel alot and don't take our laptops with us so we need to charge ipods with chargers. So we can still use the one that works with our old classic or the new one, right?

  • TS3694 I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB)  2.0.4 Mac to my OS X version 10.9.5 Mac  computer.  It cannot by synced.  Help!!

    I'm geting an unknown error message 13010 when I restored my iPod Classic (160 GB)  2.0.4 Mac to my OS X version 10.9.5 Mac  computer.  It cannot by synced.  Help!!

    See Corrupt iPod classic.
    tt2

  • My new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks

    my new ipod classic 160 gb powered off and won't turn back on. if i plug in to computer, itunes will not open. if i start itunes first then plug in ipod, itunes freezes up. Looking for help. thanks. Was not connected to the computer when ipod died.

    I have not heard of a good reason for this to happen or how to fix. 3 days later my screen lights up and says to connect to charger.... so its back "for now". Best music player on the market when it works.

Maybe you are looking for

  • VGA port doesn't give video signal.

    Hi friends I have Kubuntu and Archlinux in my laptop. I've a monitor samsung with 1280x1024 of resolution. In ubuntu the monitor work fine but in arch. xrandr command give the following output with the monitor plug in or not: xrandr: Failed to get si

  • How to create a nested hierarchy of layers in Acrobat X

    After researching on line for a few days it appears that AutoCAD 2012 64 bit no longer supports PDFMaker.  In the old PDFMaker it would appear that I could select AutoCAD layers to make a layer groups or nested hierarchy.  I want create something lik

  • Dynamic rendering of WebDynpro Java View

    Hi, For the project work I have to render the WebDynpro Java View dynamically. Here I need to get the UI Element. From there I need to get the context with which UI Element like Input field, Dropdown are binded. I am able to get the UI Elements from

  • I have used one bean in another bean, but how to diaply in jsp

    iam using atruts archetecture, here iam using one form that anoter bean iam using, in the destination jsp how to display that innerbean proties any suggetion, thanks

  • Serialization problems with JOptionPane

    Hi, I am having a problem attempting to serialize and deserialize a JOptionPane contained within a JPanel running in an applet. The code is straightforward enough: JOptionPane m_pane = new JOptionPane("Hello world !!"); contentPane.add( m_pane, "Cent