Apple should have had Airport Express built in to iPod HiFi

Apple should have had Airport Express built in to iPod HiFi

I am constrained to point out that the iPod Hi-Fi currently lists for $349 US and the Airport Express (AE) for $129 US. That would be a ≈$478 product with a greatly narrowed sales appeal. Assuming they could reduce the cost by losing the plastic case package, it would still be forcing those who did not desire that function to pay for it anyway. I believe it to be more flexible and appealing to a broader audience without.

Similar Messages

  • Should I buy airport express, extreme or time capsule?  I have my new Mac Pro. 2 iPhones, 2 iPads , and grandchildren who come with their devices.  I live in a two-level house.

    Should I buy airport express, extreme or time capsule?  I have my new Mac Pro. 2 iPhones, 2 iPads , and grandchildren who come with their devices.  I live in a two-level house.

    A Time Capsule is an AirPort Extreme with a built in hard drive to allow your Mac(s) to back up automatically, so it's a logical choice if you need a wireless router and back up capabilities for your Macs
    The AIrPort Extreme has a bit better antenna arrangement than an AirPort Express, so it would be a good choice for a two level house.
    Depending on the location of the "main" wireless router, you may find that you still need to add an extender or two in other parts of the house for full, fast wireless coverage. The AirPort Express is a good choice for this duty.
    To compare the 3 Apple devices, see this Apple support document:
           Compare Apple Wi-Fi base stations          AirPort Express    AirPort Extreme    Time Capsule    

  • I have an Apple TV and an Airport Express, can I use these to stream all audio from either my iPhone or my MacBook Pro, including Pandora?

    I have purchased an Apple TV and an Airport Express as a gift for a loved one and was under the impression that these two would not only allow for movies, videos etc would be streamed to the TV from my MacBook Pro, but also set up Airport Express with speakers and stream music from my laptop or iPhone.  Is there a way for all music, including Pandora, to be streamed through the Airport Express?  I can only figure out how it works with iTunes, not Pandora.
    Thanks for the help!!!

    You might want to take a look at Airfoil for Mac to be able to stream any audio source on your Mac.
    Rogue Amoeba | Airfoil for Mac: Wireless Audio Around Your House

  • If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?

    If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?
    Or just one device(room) at a time?
    It seems there is a lot of home theater systems where they all hook up to one "control" and then disperse to the different locations per instructions..
    Is this possible with all apple products?

    From iTunes using Multiple Speakers (you can control with the Remote app on iPhone/iPad too), but not from AppleTV itself.

  • Why have apple not launced new airport express 802.11ac version

    Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
    Do you think they will launch one soon as wanting to extend my WI-FI network but don't want to purchase current Airport Express 802.11n version if a new model is due to be on sale in the near future as would prefer latest models/technology.
    Please advise
    Regards
    Dave

    Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
    Do you think they will launch one soon ......
    Sorry, but no one here on a user-to-user support forum will be able to tell you what a notoriously secretive company like Apple will do or when they might do it. We are all users.....just like you.
    You would need to ask Apple about this, although I would be very surprised if you get an answer with any real information.
    http://www.apple.com/support/contact/

  • Have 2x Airport Express, doesn't seem to be extending network

    Hi all,
    I have a Time Capsule and 2 Airport Express'. My configuration is as follows:
    1. Time Capsule is in Office connected to ethernet DSL Router
    2. Airport Express 1 in Living Room
    3. Airport Express 2 in Conservatory
    I bought the Airport Express' to extend the wireless signal (wirelessly - which I was told by somebody in an Apple Store I could do). All have been setup using the Airport Utility (the Time Capsule created a new network, Airport Express' to existing network) and have a solid green light. They are all acquiring an IP Address from the DSL Router correctly. I can see all 3 in the living room as this is the middle point. However, if I go into the Conservatory my Macbook Pro loses all signal. I can see my Network in the airport list but when I click on it, it asks for a password and then times out.
    If somebody could help me with this problem I would be extremely grateful.
    Many thanks for your help.

    Welcome to the discussions!
    I assume that you have the AirPort Express(n) as the "g" version will not be compatible with the "extend a wireless network" function.
    Here's a checklist to go through to make sure you have the proper settings:
    _On the Time Capsule:_
    Open AirPort Utility, click Manual Setup
    Click the Wireless tab just below the row of icons
    Wireless Mode should be "Create a wireless network" (It's probably already set this way)
    Make sure there is a check mark next to "Allow this network to be extended"
    Update to save settings
    _On each Express:_
    Open AirPort Utility, Click Manual Setup
    Click the Wireless tab
    Wireless Mode should be set to "Extend a wireless network". If you don't see this choice, hold down the "option" key when you click on the selection box
    When you select "Extend.." your wireless network created by the TC will appear as a choice to extend. Select it and enter the wireless password.
    Make sure there is a check mark next to "Allow wireless clients"
    Update to save settings.
    Whenever you plug the Express in, it will automatically extend the main wireless network from the Base Station. The ethernet port is also "live" in this setup. But note...you cannot extend the "guest" network if you have a dual band Time Capsule.
    For more info, refer to the Designing AirPort Networks guide, pages 43-44.
    http://manuals.info.apple.com/enUS/Apple_AirPort_NetworksEarly2009.pdf

  • I have on airport express that is 5  years old, I now have a new wireless router.  I want to  use the express just for air waving iTunes.  How do I set it up?

    I have on airport express that is 5  years old, I now have a new wireless router.  I want to  use the express just for air waving iTunes.  How do I set it up?

    Hello 84wvu,
    It sounds like you want to setup your Airport Express to Airplay music from iTunes.  I found an article with steps to help you get this setup:
    Connecting to an existing Wi-Fi network, exclusively for iTunes music
    AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
    Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
    How to Set It Up
    Connect your AirPort Express to your home stereo or powered speakers.
    From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
    Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
    I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
    Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
    http://support.apple.com/kb/ht4587
    Thank you for posting in the Apple Support Communities.
    Best,
    Sheila M.

  • I am unable to use apps on my iPhone 3GS, apple TVs & iPad mini - Airport Express

    I currently have an airport express and Netgear ADSL2+ modem.  I also have an iPhone 3GS, 2 apple TVs, iPad mini, and iMac (circa 2008). The only device that is working properly is the 2008 iMac. All other devices show that I have 5 bar signal but do not allow me to use any of the apps (ie: Netflix, Facebook, Instagram, etc.) I have ran speedtest on all devices, ping and download speed are as expected. Ping: 150 ms, Download: 2.7 mbps, Upload 0.68 mbps from iMac. The only difference is that upload speed on iPhone and iPad mini does not register. I feel like the issue is with the modem or the airport? Do I need the airport extreme even though I show 5 bar signal strength on all devices or do I need a new modem from Verizon in hopes that it will get me a better connection on a device that they support? (they do not support the Netgear modem I currrently have).

    iPhone 4 isn't supposed to be able to mirror:
    http://support.apple.com/kb/HT5209?viewlocale=en_US&locale=en_US

  • I have two airport express base stations that I want to configure on two separate sets of speakers in two separate rooms. How do I do this? Airport Utility only seems to scan one express at a time.

    I am currently running a PowerPC G5 imac and have a wired broadband modem via ethernet with airport wireless network turned on, on the G5. I have the computer in the bedroom and have an airport express wired into a mixer that connects to my stereo. I have recently bought another airport express base station to connect to a pair of active monitors in the kitchen. When I try to scan these on Airport Utility version 5.42 I am only managing to scan one base unit at a time. I have plugged them in separately and reset them, they both have firmware updates, however the utility will only read one at once. I have read that you can link base stations to the same WDS. I would like to know how to go about doing this if it will only scan one airport express at a time. I have looked it up on the net and not found anything that is a simple fix. Can anyone help? In Apple Support it says that multiple Base Stations can be used. I would like to get both Apple Airport Express units to be able play airtunes separately or at the same time depending where I am in my flat. I do not need different music in each room. I would like to stream music from the computer to multiple rooms in the flat without having to continually unplug and configure the Base Stations. Has anyone come across such a challenge? Any help would be welcome. 

    How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
    To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
    Launch the AirPort Utility.
    Select the AX.
    If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
    AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
    Wireless Security: None OR, if you are using security on your wireless network:
    Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
    Password: <enter your wireless network security password>
    Verify Password: <re-enter the same security password>
    Click Update to write the new settings to the AX.

  • I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network?

    I have an AirPort Express, iPhone 5, and MacBook (late 2010). How do I see the graphical overview of my network? (I can't seem to find a way to see it).
    My computer is acting....well, strange.  I can't put my finger on it but it doesn't seem right.  Menus look skewed.  Some applications look like they're trying to disguise themselves as apple (no consistant window formats).  Airplay turns on and off on my devices on it's own.  And some locked system preference seem to unlock themselves, or won't even grey-out after I lock them. 
    I have changed my password many times but the issue keeps coming back.  I feel like I'm going crazy - but I know that something just isn't right...maybe someone's been hacking me? (I have no idea why...) 
    Anyway, maybe I could have stemmed from an improper setup of my wireless network.
    Any thoughts?
    Also, right now, when I just signed into apple communities....
         I have an iCloud email address that is accociated with my 1 and ONLY Apple ID...
         It seems to have been working but...
         When I loged in here it only saw my:
                                  OLD MacBookPro
                                  3 Old iPods
                                  My new MacMini with OS X Sever (Server is currently turned off)
         Could my Apple ID be confusing my MacBook (which I'm currently using) as an old iPod or my old MacBookPro?
         I doesn't even see my iPad (1st generation), or my iPhone 5
         Also, the Mac App store is giving me the option to download Mountain Lion??? I already have version 10.8.3...
    Can anyone perform an analysis on my account and computer?  I have been to the Apple Store 6 seperate time and the problem was not resolved (after 6 COMPLETE hard drive wipes).
    PLEASE HELP!

    i guess you could put the aiport utility app on your iphone, click on the aiport express there, it will show you how many devices are connected to it and the mac addresses of those devices.

  • How can I stream audio from Apple TV 2 to Airport Express speakers.

    how can I stream audio from Apple TV 2 to Airport Express speakers.
    I have LCD projector on one wall and connected ATV to it via HDMI.
    Speakers on the other wall and connected to APXpress.

    To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
    Now I've got something to do.

  • Apple TV as an Airport Express

    This may sound a stupid question but can an Apple TV function like the old airport express, ie I can stream music to it via iTunes from the sound output pop up at the bottom right.
    I understand that the Apple TV can work in reverse and stream music from iTunes on a remote computer but I don't always want to go to where the Apple TV would be (where I currently have an airport express) to stream music to my HiFi system.
    Is it also true it can output sound from internet radio stations?

    this is not a supported option.

  • I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration?

    I have an Airport Express, which flashes amber, but when I go to manual set up, it says there's an error and tells me to close configuration? Once I complete that, the same thing occurs, and there's another error message?

    Is this a new AirPort Express, or one that you have had for some time that has now developed problems?
    What function do you want the Express to perform on your network?

  • I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?

    I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?

    That one doesn't work.
    Verstuurd vanaf mijn iPhone
    Op 19 nov. 2014 om 13:55 heeft "Apple Support Communities Updates" <[email protected]<mailto:[email protected]>> het volgende geschreven:
    http://www.apple.com/support/assets/images/external/emails/logo.gif
    You received a reply
    Bob Timmons<https://discussions.apple.com/people/Bob+Timmons?ac_cid=op123456> has replied to your question. You can view the full discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
    I have an airport express (802.11n) which download do I need to get it work on Windows 8.1?<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939>
    It has been some time since Apple updated AirPort Utility for Windows. The current version is 5.6.1.
    It runs on Windows 7, but I have not checked on Windows 8.
    AirPort Utility 5.6.1 for Windows<http://support.apple.com/kb/dl1547>
    Correct Answer <https://discussions.apple.com/email/thread/6679920/correct/27128939> Helpful Answer <https://discussions.apple.com/email/thread/6679920/helpful/27128939>
    Use the buttons above to tell Bob Timmons and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
    To reply to Bob Timmons, go to the discussion<https://discussions.apple.com/message/27128939?ac_cid=op123456#27128939> in Apple Support Communities.
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile<https://discussions.apple.com/user-preferences!input.jspa>.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved<http://www.apple.com/legal/> | Privacy Policy<http://www.apple.com/legal/privacy/> | Terms of Use<https://discussions.apple.com/docs/DOC-5952> | Apple Support<http://www.apple.com/support/>

  • I have installed airport express and it lights steady green. But when I use the airport tool, nothing can be found.

    I have installed airport express on my Window 7 and had problem to find the airport express.
    I solved the problem by turning off my AVG firewall and  the airport tool found the airport express and it went steady green.
    I then turned on the AVG firewall again and it continues ok.
    But when I turn off and restarted my laptop I have to follow the same procedure.
    The AVG firewall is set to All Allowed for the airport express.
    Is there anybody out there that can give assistance to solve this problem?

    Hi,
    I solved the problem myself by updating the Wi-fi driver.
    Now it works perfect.

Maybe you are looking for

  • I recently found my old Ipod 4, I cant download apps

    I restarted it and removed all restrictions and it still refuses to work -.-, ive looked up EVERYTHING i have searche dover and over and it doesnt work WHAT THE **** IS WRONG WITH THIS STUPID ******* THING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :'(

  • Error while loading shared libraries: libdb.so.3

    Hi, While running adconfig, I am getting below error: /iAS/Apache/perl/bin/perl: error while loading shared libraries: libdb.so.3: cannot open shared object file: No such file or directory. It is new cloned environment of 11.5.10.2 with 11g db on lin

  • How do i add a description that will populate in iPad podcast app?

    In iTunes on the computer, I can click on the i (information icon) and get a description. However, when I click on the i icon in the podcast app on my iPad, the description information does not appear. Is there a way to make this info appear on the p

  • Internal production Labels

    I have a question on Handling unit management, we are using this application for product traceability. Creating internal labels for semi finished products & customer labels/internal labels for finished products. Following information required on the

  • The query is correct but jdbc modify it !!

    my query is SELECT o.ID_pagamento, SUM (m.valore) FROM operazioni o, movimenti_magazzino m WHERE m.ID_operazioni = o.ID AND m.quantita < 0 GROUP BY o.ID_pagamento but jdbc automatically executes a second query: SELECT COUNT(*), O.ID_PAGAMENTO, SUM (M