Apple sign is blinking during boot process, probably deleted system folder

Hi,
I have probably deleted the system folder. System does not boot anymore. Display shows only blinking apple.
Do I have to reinstall Max OS X?
..hope someone can help me as mac-world new joiner.
Cu
mac mini Mac OS X (10.4.7)

Welcome to Apple Discussions!
If the system doesn't find a valid MacOS installation to boot from, you'll see a flashing question mark on screen.
Deleting MacOS itself is not all that easy since MacOS knows it's not a good thing! If you aren't sure you've done this, try booting with the Option key held down (it's marked as the Alt key on PC keyboards) and this will take you to a screen showing you any available boot volumes in, or connected to the system. If your internal drive is showing, select it and boot, then go to the startup disk preference and select the drive to make sure it boots from that correctly next time.
If the internal drive doesn't appear, then yes, you've lost your MacOS. Insert the original install disk which came with the system and boot with the C key held down. Run Disk Utilities and check the internal drive for permissions errors and problems (the repair permissions and repair Disk buttons) respectively. If all is well and the system still doesn't reboot, run the installer from the original install disk and do an Archive and Install, which will retain your data and just create a new copy of MacOS.
If your dive is reported to have problems that Disk Utilities can't repair, you will probably need to do an Erase and Install, which will reform the drive (thus loose your data) and install a completely fresh copy of MacOS, returning the system to out-of-the-box condition.

Similar Messages

Cisco Aironet 1262N stuck during boot process

I am banging my head against the wall trying to figure out why my AIR-AP1262N-A-K9 will not boot all the way. It will get all the way to initiating the interfaces and stop. I can never get to controlling the cli. This is my first time with a cisco ap but from everything that I read it seamed very easy.
This unit from what I understand will work all on its own with no controller. Hence it is called a "standalone" model. Yet it seems to be looking for something to finish during the boot. Below is the out put during boot. The last line is where it stops.
If anyone can help me I would greatly appreciate it.
r WRDTR,CLKTR: 0x8200083f 0x40000000
r RQDC ,RFDC : 0x80000033 0x00000212
using eeprom values
WRDTR,CLKTR: 0x8200083f 0x40000000
RQDC ,RFDC : 0x80000033 0x00000212
using MCNG ddr static values from serial eeprom
ddr init done
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x8200083f, 0x40000000
RQDC, RFDC : 0x80000033, 0x00000212
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
64bit PCIE devices
PCIEx: initialization done
flashfs[0]: 147 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31739904
flashfs[0]: Bytes used: 6435328
flashfs[0]: Bytes available: 25304576
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 7c:ad:74:93:36:ba
Waiting for PHY auto negotiation to complete... TIMEOUT !
Ethernet link is down.
Error: RGMII speed
The system has encountered an error initializing
the Ethernet port.
The system is ignoring the error and continuing to boot.
If you abort the system boot process, the following
commands will re-initialize Ethernet, TFTP, and finish
loading the operating system software:
    ether_init
    tftp_init
    boot
button pressed for 22 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
process_config_recovery: image recovery
ap:
r WRDTR,CLKTR: 0x8200083f 0x40000000
r RQDC ,RFDC : 0x80000033 0x00000212
using eeprom values
WRDTR,CLKTR: 0x8200083f 0x40000000
RQDC ,RFDC : 0x80000033 0x00000212
using MCNG ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x8200083f, 0x40000000
RQDC, RFDC : 0x80000033, 0x00000212
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is up.
PCIE1: VC0 is active
64bit PCIE devices
PCIEx: initialization done
flashfs[0]: 147 files, 7 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 31739904
flashfs[0]: Bytes used: 6435328
flashfs[0]: Bytes available: 25304576
flashfs[0]: flashfs fsck took 9 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 7c:ad:74:93:36:ba
Waiting for PHY auto negotiation to complete... TIMEOUT !
Ethernet link is down.
Error: RGMII speed
The system has encountered an error initializing
the Ethernet port.
The system is ignoring the error and continuing to boot.
If you abort the system boot process, the following
commands will re-initialize Ethernet, TFTP, and finish
loading the operating system software:
    ether_init
    tftp_init
    boot
Loading "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1"...#########
File "flash:/ap3g1-k9w7-mx.124-25d.JA1/ap3g1-k9w7-mx.124-25d.JA1" uncompressed a
nd installed, entry point: 0x4000
executing...
enet halted
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 12.4(25d)JA1, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 02:07 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
flashfs[1]: 147 files, 7 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 31481856
flashfs[1]: Bytes used: 6435328
flashfs[1]: Bytes available: 25046528
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Radio0 present 8364B 8000 B8020000 0 B8030000 10
Radio1 present 8364B 8000 B0020000 0 B0030000 C
Waiting for PHY auto negotiation to complete... TIMEOUT !
Ethernet link is down.
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-AP1262N-A-K9     (PowerPC460exr) processor (revision B0) with 81910K/4
9152K bytes of memory.
Processor board ID FTX1716E2DN
PowerPC460exr CPU at 666Mhz, revision number 0x18A8
Last reset from power-on
1 Gigabit Ethernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 7C:AD:74:93:36:BA
Part Number                          : 73-12175-06
PCA Assembly Number                  : 800-32268-06
PCA Revision Number                  : B0
PCB Serial Number                    : FOC17106662
Top Assembly Part Number             : 800-33866-02
Top Assembly Serial Number           : FTX1716E2DN
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1262N-A-K9
Press RETURN to get started!
*Mar 1 00:00:09.481: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self t
est passed
*Mar 1 00:00:09.490: *** CRASH_LOG = YES
*Mar 1 00:00:09.490: 64bit PCIE devices
*Mar 1 00:00:09.789: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
evel 4
*Mar 1 00:00:10.088: soap_extern_intr_dispatch: no handler for UIC2 intrno 12 l
evel 4
*Mar 1 00:00:12.966: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 0
*Mar 1 00:00:15.649: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self
test passed on interface Dot11Radio 1Base Ethernet MAC address: 7C:AD:74:93:36:
BA
*Mar 1 00:00:56.377: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to up
to up
ernet0, changed state to down
*Mar 1 00:11:00.003: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to a
dministratively down
*Mar 1 00:11:00.003: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to a
dministratively down
*Mar 1 00:11:00.003: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power s
ource
*Mar 1 00:11:00.012: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 12.4(25d)JA1, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 11-Aug-11 02:07 by prod_rel_team
*Mar 1 00:11:00.012: %SNMP-5-COLDSTART: SNMP agent on host ap is undergoing a c
old start
*Mar 1 00:11:00.994: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to up
*Mar 1 00:11:01.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
1, changed state to down
*Mar 1 00:11:01.003: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio
0, changed state to down
*Mar 1 00:11:11.956: %LINK-3-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:11:12.957: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, chan
ged state to down

what are your console settings set for?
you need to be 9600/none/8/1 and flow controll set to off to be able to interact with the CLI
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

[SOLVED] "Filesystem check failed" during boot process

I was using XFCE on my netbook recently and clicked "shutdown". It logged out to the command prompt and nothing happened. Assuming that I'd clicked "logout" by mistake, I typed "pacman -Syu" to run an update... And moments later it suddenly started the shutdown process.
Now, whenever I boot up, I see the message below. I tried booting from a GParted CD to check the filesystems for errors, but none were detected.
Can anyone suggest what I might need to do to fix the problem?
rootfs: clean, 11026/246512 files, 477083/984576 blocks
home: clean, 4386/527280 files, 237183/2105344 blocks
/dev/sdb2 is mounted. e2fsck: Cannot continue, aborting.
************* FILESYSTEM CHECK FAILED ************
* Please repair manually and reboot. Note that the root
* file system is currently mounted read-only. To remount
* it read-write type: mount -n -o remount,rw /
* when you exit the maintenance shell the system will
* reboot automatically.
Give root password for maintenance
(or type Control-D to continue):
Last edited by esuhl (2012-03-27 01:20:07)

Thank you all for your replies :-)
hadrons123 wrote:What happens when you do try the suggestion given by it?
I don't exactly know how I should "repair manually"... I thought a filesystem check in GParted would have been enough...
lijpbasin wrote:You can boot the system using a archlinux live cd, and run fsck manually on every linux partition in the old system with options.
DON'T mount any of the filesystems before running fsck, or your data will probably be lost. If you want to check the partition information first, run fdisk -l with root privileges.
Thanks. I tried booting from an ArchBang live CD last night and ran "e2fsck -pcv" on each partition. The check completed, but the problem persists... I just tried again using "fsck" as you suggested and got the following output (but the machine still fails to boot with the same error as before):
fsck from util-linux 2.20.1
e2fsck 1.41.14 (22-Dec-2010)
usr was not cleanly unmounted, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
usr: 115811/458752 files (1.7% non-contiguous), 783161/1834496 blocks
Gcool wrote:
/dev/sdb2 is mounted. e2fsck: Cannot continue, aborting.
As mentioned already, the reason it's failing is because the /dev/sdb2 partition is mounted before it can be fsck'd. What is this partition exactly (which filesystem, what's on it, mountpoint,...)?
I'm not overly familiar with the Linux boot process, but why would it suddenly be mounting this partition before fsck-ing it? Even if it was mounted when the netbook shutdown, surely the boot process starts with all partitions unmounted...? Anyway, the partition details from /etc/fstab are below.
<file system> <dir> <type> <options> <dump> <pass>
tmpfs /tmp tmpfs nodev,nosuid 0 0
/dev/sda1 / ext2 defaults,noatime 0 1
/dev/sdb1 /home ext2 defaults,noatime,user_xattr 0 1
/dev/sdb2 /usr ext2 defaults,noatime 0 1
I'm (now) aware that mounting /usr as a separate partition is a bad idea and (having read the "Error when booting with the new initscripts" thread), I have told pacman to ignore updates to the initscripts package (until I figure out how best to work round or fix that issue).
Shark wrote:Write umount /dev/sdb2 in konsole or unmount partition in gparted by right click on problematic partition and click unmount. Than proced.
If I type "umount /dev/sdb2" at the prompt, I get the following error:
umount: /usr: device is busy.
(In some cases useful info about processes that use
the device is found by lsof(8) or fuser(1))
I tried "umount -l /dev/sdb2" to unmount when the device becomes free... but it never does.
I also booted into GParted, but there is no option to "unmount" /dev/sdb2. There is a "mount" option in the menu, but it is greyed out. If I open a terminal window from the GParted Live environment and type "sudo umount /dev/sdb2" I get the following message:
umount: /dev/sdb2: not mounted
DSpider wrote:Are you mounting the root drive with "ro" (read only) in fstab?
No (as shown above). I don't *think* I've messed anything up with fstab or any other config files -- everything was working perfectly till the netbook shutdown whilst pacman was running.

[SOLVED] Imapd does not start (only during boot process)

I'm running a courier-imap server.
A few days ago I noticed I did not receive any mails anymore. Then I found my imapd daemon was not running anymore.
I then stopped the daemon process together with the xinetd daemon (which lets me connect to my imap server via my local network).
I restart from a terminal both daemons (imapd an xinetd) and ... everything is up and running ! Note that I have to stop xinetd too because only stopping imapd and restarting doesn't help.
I reboot my PC ... again no imapd anymore. During the boot process I do not get any error message though ...
I'm completely puzzled
The problem started when I upgraded to the linux 3.0.1 kernel ...
Last edited by Strider (2011-08-14 07:59:41)

I managed to get the problem solved by removing and re-installing the courier-imap package. Don't know why that solved it though ...
Last edited by Strider (2011-08-14 07:59:05)

Interject self to login during Boot process - Solairs 10

I'm trying to figure out how to login by interjecting a command/key-stroke during the the Solairs 10 Boot process ( I think it's select Cntrl-A or Alt-A) and use a command which will provoke the root password. Any clue how I can get to this point? The system was designed so root can not login once console is up and available for login at the login screen so I need interject the boot process before the login GUI console is exectued.
A million thanks,
Johnny Mac

This seems to have been cross-posted to another web site, as well.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/solaris-interupt-boot-process-to-login-at-console-924122/
Insufficient responses over there, thus far
(the STOP-A suggestion in that other thread is a good start),
but it might have been polite to include a reference link to everywhere you might have asked your question. Then people wouldn't duplicate the efforts of others.

How come the apple sign keeps blinking on my ipod?

Well I have had problems with my ipod starting in the mornings. I usually have to hard boot it once to get it going but then it is good for the day. This morning I tried that but now my apple screen just blinks on and off. I have tried to reboot a couple more times without any luck. What can I do to get it to work again?

Try here
iOS: Not responding or does not turn on

Keyboard not responing during boot process (MB 865PE Neo2-LS)

Hi everyone!
When I try to access the MB BIOS during the boot process my keyboard is not responding. The keyboard comes a live only after Windows XP has started. I am trying to reinstall my computer and make a few changes in my BIOS setup.
Does anyone know what I should do to get my keyboard working again
For the timebeing I am using a Logitech G11 with USB, I have also tried an older Logitech keyboard (the one that used to work) but with the same result.
Should I try using the PS/2 conetctor instead, I could buy an adapter if that would help?
All help is greatly appreciated!

Thanks for the quick response, is there any other way to access the BIOS except by using a keyboard plugged in with ps/2?
Update: I tried with a PS/2 adaptor but with the same result, the keyboard is completelly dead during the boot process, except for a second or so when it makes a flash.

Applying Software Installation Policy Is Taking Long Time During Boot Process

1 of my servers is having slow boot up issue. I have enabled user environment debugging and the gpsvc.log file has been generated. I have also used the Windows Performance Analyzer to capture logs and results came back that the GP Client is taking a long
time in the boot process. So, I reckoned the slow boot is due to GPO but I am not sure where to look from this log file.
I have only paste part of the gpsvc.log file here due to limitation in the number of characters allowed to be posted. Would appreciate some good advise on this issue that I am facing.
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {FB2CA36D-0B40-4307-821B-A13B252DE56C}
GPSVC(34c.408) 04:03:30:109 ReadExtStatus: Reading Previous Status for extension {fbf687e6-f063-4d9f-9f4f-fd9a26acdd5f}
GPSVC(34c.408) 04:03:30:109 GetMachineToken: Looping for authentication again.
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Logging Data for Target <SW01E772>.
GPSVC(34c.408) 04:03:30:109 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:109 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 Sync Lock Called
GPSVC(34c.408) 04:03:30:109 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:109 Lock taken successfully
GPSVC(34c.408) 04:03:30:109 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:109 UnLockedsuccessfully
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: OpenThreadTokenfailed with error 1008, assuming thread is not impersonating
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:109 ProcessGPOs: Processing extension Registry
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes and nosecurity group membership change and extension Registry has NoGPOChangesset.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Wireless Group Policy
GPSVC(34c.408) 04:03:30:125CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Wireless Group Policy's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Wireless Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Environment
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:125 CheckGPOs: No GPO changes but couldn't read extension Group Policy Environment's status or policy time.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Extension Group Policy Environment skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:30:125 ProcessGPOs: Processing extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:125 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:30:125 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:30:156 GPLockPolicySection: Sid = (null), dwTimeout= 30000, dwFlags= 0
GPSVC(34c.408) 04:03:30:156 LockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:30:156 Sync Lock Called
GPSVC(34c.408)04:03:30:156 Writer Lock got immediately.
GPSVC(34c.408) 04:03:30:156 Lock taken successfully
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: Entering for extension Group Policy Local Users and Groups
GPSVC(34c.408) 04:03:30:156 MachinePolicyCallback: Settingstatus UI to Applying Group Policy Local Users and Groups policy...
GPSVC(34c.408) 04:03:30:156 ProcessGPOList: No changes. CSEwill not be passed in the IwbemServicesintfptr
GPSVC(34c.364)04:03:30:156 Message Status = <Applying Group Policy Local Users and Groups policy...>
GPSVC(34c.364) 04:03:30:156 Setting GPsessionstate = 1
GPSVC(34c.408) 04:03:31:796 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, dwStatus= 0x0
GPSVC(34c.408) 04:03:31:953 GetWbemServices: CoCreateInstancesucceeded
GPSVC(34c.408) 04:03:36:031 ConnectToNameSpace: ConnectServerreturned 0x0
GPSVC(34c.408) 04:03:36:140 ProcessGroupPolicyCompletedExInternal: Extension {17D89FEC-5C44-4972-B12D-241CAEF74509} was able to log data. Error = 0x0, dwRet= 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Local Users and Groups> at 44203 ticks (ms)
GPSVC(34c.408) 04:03:36:500 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {17D89FEC-5C44-4972-B12D-241CAEF74509}, Return status dwRet= 0x0
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups returned 0x0.
GPSVC(34c.408) 04:03:36:500 ProcessGPOList: Extension Group Policy Local Users and Groups status was not updated because there was no changes and no transition or rsopwasn't enabled
GPSVC(34c.408) 04:03:36:500 UnLockPolicySectioncalled for user <Machine>
GPSVC(34c.408) 04:03:36:500 UnLockedsuccessfully
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Device Settings
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Group Policy Device Settings'sstatus or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Group Policy Device Settings skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Folder Redirection
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Folder Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Folder Redirection skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Microsoft Disk Quota
GPSVC(34c.408) 04:03:36:531 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:531 CheckGPOs: No GPO changes but couldn't read extension Microsoft Disk Quota's status or policy time.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Extension Microsoft Disk Quota skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:531 ProcessGPOs: Processing extension Group Policy Network Options
GPSVC(34c.408) 04:03:36:531CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Options'sstatus or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Group Policy Network Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension QoSPacket Scheduler
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension QoSPacket Scheduler's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension QoSPacket Scheduler skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Scripts
GPSVC(34c.408) 04:03:36:546 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes and no security group membership change and extension Scripts has NoGPOChangesset.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Remote Desktop USB Redirection
GPSVC(34c.408) 04:03:36:546 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:546 CheckGPOs: No GPO changes but couldn't read extension Remote Desktop USB Redirection's status or policy time.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Extension Remote Desktop USB Redirection skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:546 ProcessGPOs: Processing extension Internet Explorer Zonemapping
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Zonemapping'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Internet Explorer Zonemappingskipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Drive Maps
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Drive Maps'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Drive Maps skipped withflags 0x7.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processingextension Group Policy Folders
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folders'sstatus or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Folders skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Network Shares
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't read extension Group Policy Network Shares's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Network Shares skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Files
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:562 CheckGPOs: No GPO changes but couldn't readextension Group Policy Files's status or policy time.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Extension Group Policy Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:562 ProcessGPOs: Processing extension Group Policy Data Sources
GPSVC(34c.408) 04:03:36:562 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs:No GPO changes but couldn't read extension Group Policy Data Sources's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Group Policy Data Sources skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Group Policy Ini Files
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Group Policy Ini Files's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension GroupPolicy Ini Files skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Internet Explorer User Accelerators
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't readextension Internet Explorer User Accelerators's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Internet Explorer User Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Security
GPSVC(34c.408) 04:03:36:578ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes and no security group membership change and extension Security has NoGPOChanges set.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Processing extension Deployed Printer Connections
GPSVC(34c.408) 04:03:36:578 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:578 CheckGPOs: No GPO changes but couldn't read extension Deployed Printer Connections's status or policy time.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: Extension Deployed Printer Connections skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:578 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Services
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Services's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Services skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Internet Explorer Branding
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Branding's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Internet Explorer Branding skipped with flags 0x7.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group PolicyFolder Options
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Folder Options's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Folder Options skipped because bothdeleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Scheduled Tasks
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:593 CheckGPOs: No GPO changes but couldn't read extension Group Policy Scheduled Tasks's status or policy time.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Extension Group Policy Scheduled Tasks skipped because both deletedand changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:593 ProcessGPOs: Processing extension Group Policy Registry
GPSVC(34c.408) 04:03:36:593 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:593 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:625 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408)04:03:36:625 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:625 Sync Lock Called
GPSVC(34c.408) 04:03:36:625 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:625 Locktaken successfully
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: Entering for extension Group Policy Registry
GPSVC(34c.408) 04:03:36:625 MachinePolicyCallback: Setting status UI to Applying Group Policy Registry policy...
GPSVC(34c.408) 04:03:36:625 ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:625 Setting GPsession state =1
GPSVC(34c.408) 04:03:36:765 ProcessGroupPolicyCompletedExInternal: Entering. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, dwStatus = 0x0
GPSVC(34c.408) 04:03:36:796 GetWbemServices: CoCreateInstance succeeded
GPSVC(34c.408) 04:03:36:812 ConnectToNameSpace: ConnectServer returned 0x0
GPSVC(34c.408) 04:03:36:812 ProcessGroupPolicyCompletedExInternal: Extension {B087BE9D-ED37-454F-AF9C-04291E351182} was able to log data. Error = 0x0, dwRet = 0. Clearing the dirty bit
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Finished processing extension <Group Policy Registry> at 44546 ticks (ms)
GPSVC(34c.408) 04:03:36:843 ProcessGroupPolicyCompletedExInternal: Leaving. Extension = {B087BE9D-ED37-454F-AF9C-04291E351182}, Return status dwRet = 0x0
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry returned 0x0.
GPSVC(34c.408) 04:03:36:843 ProcessGPOList: Extension Group Policy Registry status was not updated because there was no changes and no transition or rsop wasn'tenabled
GPSVC(34c.408) 04:03:36:843 UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:843 UnLocked successfully
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension 802.3 Group Policy
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension 802.3 Group Policy's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension 802.3 Group Policy skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Printers
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Printers's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Printers skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Processing extension Group Policy Shortcuts
GPSVC(34c.408) 04:03:36:875 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:875 CheckGPOs: No GPO changes but couldn't read extension Group Policy Shortcuts's status or policy time.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: Extension Group Policy Shortcuts skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:36:875 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:36:890 ProcessGPOs: Processing extension Software Installation
GPSVC(34c.408) 04:03:36:890 ReadStatus: Read Extension's Previous status successfully.
GPSVC(34c.408) 04:03:36:890 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:36:890 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 0
GPSVC(34c.408) 04:03:36:890 LockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:36:890 Sync Lock Called
GPSVC(34c.408) 04:03:36:890 Writer Lock got immediately.
GPSVC(34c.408) 04:03:36:890 Lock taken successfully
GPSVC(34c.408) 04:03:36:890 ProcessGPOList: Entering for extension Software Installation
GPSVC(34c.408) 04:03:36:890 MachinePolicyCallback: Setting status UI to Applying Software Installation policy...
GPSVC(34c.408) 04:03:36:890ProcessGPOList: No changes. CSE will not be passed in the IwbemServices intf ptr
GPSVC(34c.364) 04:03:36:890 Message Status = <Applying Software Installation policy...>
GPSVC(34c.364) 04:03:36:890 Setting GPsession state = 1
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation returned 0x0.
GPSVC(34c.408) 04:03:37:312 ProcessGPOList: Extension Software Installation status was not updated because there was no changes and no transition or rsop wasn't enabled
GPSVC(34c.408) 04:03:37:312UnLockPolicySection called for user <Machine>
GPSVC(34c.408) 04:03:37:312 UnLocked successfully
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension TCPIP
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension TCPIP's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension TCPIP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Internet Explorer Machine Accelerators
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension Internet Explorer Machine Accelerators's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension Internet Explorer Machine Accelerators skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension IP Security
GPSVC(34c.408) 04:03:37:328 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:328 CheckGPOs: No GPO changes but couldn't read extension IP Security's status or policy time.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Extension IP Security skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:328 ProcessGPOs: Processing extension Group Policy Internet Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Internet Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Internet Settings skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Start Menu Settings
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Start Menu Settings's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Start Menu Settings skipped because both deleted and changed GPO listsare empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processingextension Group Policy Regional Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extensionGroup Policy Regional Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy RegionalOptions skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Power Options
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Group Policy Power Options's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Group Policy Power Options skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Audit Policy Configuration
GPSVC(34c.408) 04:03:37:343 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:343 CheckGPOs: No GPO changes but couldn't read extension Audit Policy Configuration's status or policy time.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Extension Audit Policy Configuration skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:343 ProcessGPOs: Processing extension Group Policy Applications
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Group Policy Applications's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Group Policy Applications skipped with flags 0x7.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extension Enterprise QoS
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension Enterprise QoS's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension Enterprise QoS skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: -----------------------
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Processing extensionCP
GPSVC(34c.408) 04:03:37:359 CompareGPOLists: The lists are the same.
GPSVC(34c.408) 04:03:37:359 CheckGPOs: No GPO changes but couldn't read extension CP's status or policy time.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Extension CP skipped because both deleted and changed GPO lists are empty.
GPSVC(34c.408) 04:03:37:359 gpGetFgPolicyRefreshInfo: Mode: 1, Reason: 7
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Previous Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 SetFgRefreshInfo: Next Machine Fg policy Synchronous, Reason: SKU.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: No WMI logging done in this policy cycle.
GPSVC(34c.408) 04:03:37:359 ProcessGPOs: Boot/Logon Policy processing - checking if UBPM trigger events need to be fired
GPSVC(34c.408) 04:03:37:375 CheckAndFireGPTriggerEvent: FiredPolicy present UBPM trigger event for Machine.
GPSVC(34c.408) 04:03:37:375 Application complete with bConnectivityFailure = 0.
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xc8c
GPSVC(34c.79c) 04:03:40:546 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3a0) 04:03:40:546 Target = Machine
GPSVC(34c.79c) 04:03:40:546 Client_RegisterForNotification: User =machine, changenumber = 0
GPSVC(34c.79c) 04:03:40:546 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Entering withtarget Machine and event 0x1ac
GPSVC(3bc.ac8) 04:03:59:296 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.748) 04:03:59:296 Target = Machine
GPSVC(3bc.ac8) 04:03:59:296 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(3bc.ac8) 04:03:59:296 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.748) 04:03:59:343 Target = Machine
GPSVC(34c.748) 04:03:59:343 Target = Machine,ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:515 Target = Machine
GPSVC(34c.3ac) 04:03:59:531 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:03:59:531 Sid = (null), dwTimeout = 600000, dwFlags = 268435456
GPSVC(34c.3ac) 04:03:59:531 LockPolicySection calledfor user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Async Lock called
GPSVC(34c.3ac) 04:03:59:546 Reader Lock got immediately. m_cReadersInLock : 1
GPSVC(34c.3ac) 04:03:59:546 Sid = (null)
GPSVC(34c.3ac) 04:03:59:546 UnLockPolicySection called for user <Machine>
GPSVC(34c.3ac) 04:03:59:546 Found the caller in the ReaderHavingLock List. Removing it...
GPSVC(34c.3ac) 04:03:59:546 Settinglock state as notLocked
GPSVC(34c.3ac) 04:03:59:546 UnLocked successfully
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Entering with target Machine and event 0xd04
GPSVC(34c.bdc) 04:04:00:000 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:04:00:000 Target =Machine
GPSVC(34c.bdc) 04:04:00:000 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.bdc) 04:04:00:000 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:04:00:000 Target = Machine, ChangeNumber 0
GPSVC(34c.748) 04:04:01:140 Target = Machine
GPSVC(34c.748) 04:04:01:140 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:509CGPNotify::RegisterForNotification: Entering with target Machine and event 0x458
GPSVC(154.41c) 04:05:25:509 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:509 Target = Machine
GPSVC(154.41c) 04:05:25:525 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:525 Target = Machine, ChangeNumber 0
GPSVC(154.41c) 04:05:25:525 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(154.41c) 04:05:25:759 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x4e8
GPSVC(154.41c) 04:05:25:759 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.3ac) 04:05:25:759 Target = Machine
GPSVC(154.41c) 04:05:25:775 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(154.41c) 04:05:25:775 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.3ac) 04:05:25:775 Target = Machine, ChangeNumber 0
GPSVC(34c.3ac) 04:05:59:217 Target = Machine
GPSVC(34c.3ac)04:05:59:233 Target = Machine, ChangeNumber 0
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::UnregisterNotification: Entering with event 0x1ac
GPSVC(3bc.3cc) 04:05:59:389 CGPNotify::AbortAsyncRegistration: No asyn registration is pending
GPSVC(3bc.3cc) 04:05:59:405 CGPNotify::UnregisterNotification: Canceling pending calls
GPSVC(3bc.3cc) 04:05:59:420 Client_CompleteNotificationCall: failed with 0x4c7
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Cancelled pending calls
GPSVC(3bc.3cc) 04:05:59:420 CGPNotify::UnregisterNotification: Exiting with dwStatus = 0x0
GPSVC(34c.360) 04:06:00:827 Target = Machine
GPSVC(34c.360) 04:06:00:827 Target = Machine, ChangeNumber 0
GPSVC(34c.360) 04:06:01:155 Target = Machine
GPSVC(34c.360) 04:06:01:171 Target = Machine, ChangeNumber 0
GPSVC(34c.fe8) 04:06:02:124 CGPNotify::RegisterForNotification: Entering with target Machine and event 0x218
GPSVC(34c.fe8) 04:06:02:140 Client_InitialRegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.360) 04:06:02:155 Target = Machine
GPSVC(34c.fe8) 04:06:02:155 Client_RegisterForNotification: User = machine, changenumber = 0
GPSVC(34c.fe8) 04:06:02:171 CGPNotify::RegisterForNotification: Exiting with status = 0
GPSVC(34c.da4) 05:06:16:856 Target = Machine
GPSVC(34c.da4) 05:06:16:856 Target = Machine, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:856 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:856 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:856 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:856 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Callerrequesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:872 Caller requesting for usernotification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872Target = S-1-5-20
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:16:872 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.da4) 05:06:16:872 Could not find user by sid, finding user by session id
GPSVC(34c.da4) 05:06:16:872 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20
GPSVC(34c.de8) 05:06:16:887 Could notfind user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.de8) 05:06:16:887 Target = S-1-5-20, ChangeNumber 0
GPSVC(34c.de8) 05:06:16:887 Could not find user by sid, finding user by session id
GPSVC(34c.de8) 05:06:16:887 Caller requesting for user notification/lock is from session 0
GPSVC(34c.da4) 05:06:26:981 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:341 SID = S-1-5-21-206128196-3657029889-627342018-7757
GPSVC(34c.de8) 05:06:32:356 bMachine = 0
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.de8) 05:06:32:356 Message Status = <Applying user settings...>
GPSVC(34c.778) 05:06:32:356 StartTime For network wait: 32140ms
GPSVC(34c.778) 05:06:32:356 Current Time: 3819953ms
GPSVC(34c.de8) 05:06:32:356 Setting GPsession state = 1
GPSVC(34c.778) 05:06:32:356 MaxTimeToWaitForNetwork: 5212ms
GPSVC(34c.778) 05:06:32:356 TimeRemainingToWaitForNetwork: 0ms
GPSVC(34c.778) 05:06:32:356 UserPolicy: Waiting for machine policy wait for network event with timeout 0 ms
GPSVC(34c.778) 05:06:32:388 GPLockPolicySection: Sid = (null), dwTimeout = 30000, dwFlags = 65538
GPSVC(34c.778) 05:06:32:388 LockPolicySection called for user <Machine>

Hi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Arch stops during booting-process

hi guys,
this is my first post here after using archlinux 1 1/2 years...but i´m still a noob
hope you could help me...and sorry for my bad english
now my problem:
got a new pc:
cpu: intel core 2 duo e6600
mainboard: gigabyte ga-965p-ds3/s3
ram: 4gb ddr2 pc800
grafic: geforce 7950 gt 512mb
hdd: sata samsung 320gb
ide maxtor 120gb
i installed the last "arch x86 64 iso", the installation works fine, but after reboot arch hangs on "loading udev uevents"
i´ve got no idea what the problem could be...hope anyone could help me and if you need further information just tell me
thanx

thanks guys...you´re great...
the intel_agp causes the freeze...
now i got a nice boot-process :-)
...but now i got another problem...
when i installed arch i used the ftp-install...
arch recogniced my network and everthing was fine...
and now, after install arch doesn´t work with my ethernetcard...
i´ve got a
onboard Marvell 88E8056 phy ethernetcard
...what is the module i need? how do i get it to work?

G580 (2189) Stuck on Splash Screen during Boot process

Recently my G580 (2189) hangs on Boot. Get the spash screen and pressing F2 or F12 does nothing. Have to keep power cycling the laptop up to 10 times before the boot process succeeds and loads windows.
Running Win7 Professional on G580 (2189) laptop.
Problem only recently started in the past couple of months after a series of Windows updates were installed.
Disk Check reports no errors.
I have read this is a BIOS issue. I have tried changing BIOS to EFI instead of UEFI, but the intermittent problem persists. No updates to my BIOS are available through Lenovo, and I have found no insight when searching the forums. I have found numerous people with the exact same problem, but what I read is that a new motherboard is called for from the people who have contacted Tech Support. I have tried the battery removal, power button 30 seconds, etc. but it does nothing to fix the problem.
Everything worked perfectly up until about 2 months ago. Never an issue. Now my laptop stall on boot, and one stop doesn't even work when the spash screen is stuck and windows does not load.
Anyone know of the "cause" of the problem? Is it truely a BIOS issue?
Any suggestions as to a solution. Laptop only recently went out of warranty, and I find it bizzare that it won't even boot. if it is a BIOS issue, I am guessing reinstalling Win7 Pro won't help.

Follow the below mentioned steps to resolve the issue:
Check if there are any external devices connected to the computer, if yes remove them and restart the system to check if the issue occurs.
Perform Startup Repair:
http://windows.microsoft.com/en-us/windows7/products/features/startup-repair
If the issue persists, then start the system in safe mode with networking and check if the Windows load successfully.
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mf...
If it works fine in safe mode try performing a clean boot to find the root cause.
To help troubleshoot error messages and other issues, you can start Windows 7 by using a minimal set of drivers and startup programs. This kind of startup is known as a "clean boot." A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.microsoft.com/kb/929135
Note: After troubleshooting, make sure to start the computer as mentioned in Step 4 from the above provided KB article.
GuruAid.com

Error during Proxy Processing from ECC system

Hi All,
I had created Webservice using ABAP in ECC system with Message interface designed in XI system. This Webservice will simply displays employee address when you enter employee id and address type.During my testing of Web service in ECC system via Tcode WSADMIN, I am getting below error
"An error has occurred. Maybe the request is not accepted by the server: "
"Error during proxy processing"
Request
POST /sap/bc/srt/xip/sap/Z_ADDRESS_01?sap-client=100 HTTP/1.1
Host: rpmsap3.rapidigm.com:8080
Content-Type: text/xml
Connection: close
authorization: <value is hidden>
Content-Length: 389
SOAPAction: ""
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope>
Response
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"><SOAP-ENV:Body><ns1:Request_Message xmlns:ns1='http://sap2webservice'><Employee_Id>MM01</Employee_Id><Address_Type>AM</Address_Type><Date>11/11/2006</Date></ns1:Request_Message></SOAP-ENV:Body></SOAP-ENV:Envelope> HTTP/1.1 500 Internal Server Error
set-cookie: sap-usercontext=sap-client=100; path=/
content-type: text/xml; charset=utf-8
content-length: 270
sap-srt_id: 20061111/154215/v1.00_final_6.40/A901A40749EEA74BB8D8AB72B56C02A7
server: SAP Web Application Server (1.0;640)
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"><soap-env:Body><soap-env:Fault><faultcode>soap-env:Server</faultcode><faultstring xml:lang="en">Error during proxy processing</faultstring></soap-env:Fault></soap-env:Body></soap-env:Envelope>
Appreciate any help on above issue
Regards
Manish Mundra

Hi All,
Please help on below issue.
Thanks in Advance
Regards
Manish

Blinking horizontal cursor after BIOS screen during boot process

I have a brand new FM2-A75MA-E35 motherboard and installed it without issue. I am currently experiencing a problem where when I turn on the computer, the MSI BIOS screen appears and then goes to a horizontal blinking cursor in the top left of the screen.
The problem occurred after the following happened: while the computer was running, I opened the case to check the CPU fan - a (unknown) wire shifted, touched something on the motherboard (corner of the motherboard near the memory) and the computer shut off a few moments later. There are no beeps, no error information when booting the computer. I can access the BIOS settings, change settings, navigate through the menus, the BIOS recognizes the SATA hard drive and Blu-Ray player connected to the motherboard, USB devices connected, etc. The BIOS screen does not display the temperature for the CPU or Mainboard System.
I'm unsure what to do next to tell if the board is damaged or I can get this back to a working state.
Processor: AMD A6-6400K, 3.9 GHz
BIOS Version: E7721AMS V2.2

from which storage you try to boot?
list full and detailed system specs, see >>Posting Guide<<

Mini switches off during boot process

Hi, My 1st gen Mac mini has come up with a new problem. After switching on the Apple logo appears, then the cartwheel. After approx 15 seconds the Mini powers itself down. I can switch back on immediately and the process repeats. Any suggestions for fix. Thanks

A problematic fan would certainly be likely to cause a similar problem since the system goes into protective shutdown to prevent damage from overheating, but in this instance the shutdowns appear rather too rapid to be fan related, particularly if the system is cold before startup. That's one of the easiest ways to test for a fan problem - if the system runs longer (ie, some minutes) from starting when cold and only a few seconds or a minute or two when starting from warm, the fan would be a prime suspect. If behavior is broadly the same whether cold or warm (as appears to be in this case), then the fan is rather less likely.
Good thinking to raise the issue though - it's often overlooked as a cause of apparently random shutdowns.

During boot process windows screen appears and then all goes blank

Sometimes when i switch on my laptop it displays the windows screen and then all goes blank. the hard drive light also stops flickering.
I have to switch on again. this can happen 2-3 times and then the laptop will start normally. No scan disk or error messages are displayed.
Also, even after i have logged on the screen goes blank and the system stops working altogether. i have to manually switch off and on again. Again, no scan disk or error message is displayed. i have run Toshiba diagnostics and all seems to be functioning well according to it.

Hi dude
Firstly it would be very nice to know what notebook model you have. Such info is mostly appreciated.
My first thought was a hardware malfunction. Maybe a something wrong with HDD. But in my opinion you should firstly check if the same would happen after OS recovery.
Try to recover the notebook with the delivered Toshiba recovery CD and check the notebook functionality after this procedure.
See you later ;)

Errors during boot OEL 5.5 starting a 11.2 instance

Hello,
I've installed Oracle 11GR2 on OEL 5.5 and a I created a db instance. How I can see why my db instance is not up? More precisely , how I can get errors messages thrown by procedure that start oracle instance during boot process (I am sure that kind of messages is thrown but I can't see them).
Many thanks,
Aurel

Hi;
I've installed Oracle 11GR2 on OEL 5.5 and a I created a db instance. How I can see why my db instance is not up? More precisely , how I can get errors messages thrown by procedure that start oracle instance during boot process (I am sure that kind of messages is thrown but I can't see them).For can see your db up or not u can run :
ps -ef|grep lg
oracle 6750316 1 0 Feb 28 - 0:03 asm_lgwr_+ASM
oracle 9437238 14418146 0 16:06:56 pts/3 0:00 grep lg
oracle 14745644 1 0 15:50:41 - 0:00 ora_lgwr_orcl
So my asm instance and db instance is up
For alert or error message you need to create one sh which is cheking alert.log,if you hit ORA error than it can send u email
Regard
Helios

Apple sign is blinking during boot process, probably deleted system folder

Similar Messages

Maybe you are looking for