Apple software update and safari not working

Apple software update says "could not connect verify a connection with the app store". Safari wont even display google. Both apps open up initially.
<Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into a message.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Similar Messages

Updated to 10.6.8 software update and itunes not working

I recently upgraded to 10.6.3, then installed the 10.6.8. I have tried using the software update and it tells me that my network is not available, but when I when the check it says everything is fine. I have tried to connect to the Mac App store & Itunes and it gives me the same error message. Any ideas???

Did you use the Combo update. This is the route to go; then software update (about seven of them).
Mac OS X 10.6.8 Update Combo v1.1

App store, Safari, software updates, icloud, do not work in Mavericks 10.9 using a proxy server

App store, Safari, software updates, icloud, do not work in Mavericks 10.9. these problems are interrelated I am sure. Apple apps were working fine in 10.8.5 I could do software updates through a proxy server using password authentication. I reinstalled a new system 10.9 on another partition and it won't let me use Safari or update software using a proxy server. Firefox works fine (I am using it to post). I am very disappointed that this wasn not fully tested BEFORE releasing Mavericks. Any solutions would be greatly appreciated.

I had this problem myself.
Checked the system log with Console, and I found the entry:-
Nov 11 11:16:41 teds-new-mac.ad.mycompany.co.uk ocspd[537]: Authentication challenge received for "10.203.39.212:8080", unable to obtain proxy server credential from System keychain.
For some unknown reason, Mavericks seems to be looking in the System keychain, when these credentials are actually held in the Login keychain.
So, I tried "Copy & Paste" - copying the https user name & password from the Login keychain and pasting into the System keychain, which worked but it's not quite as straightforward as I initially thought.
Pasting into the System Keychain was, I found a not-very-intuitive process:
Having opened your Login Keychain, click once on the item to be copied and when it's highlighted, select "Copy" from the Edit menu or, of course, cmd+c.
Select the System Keychain:- DO NOT CLICK THE PADLOCK IN THE TOP LEFT TO UNLOCK IT.
From the Edit menu, select "Paste" or cmd+v.
You will then get a dialogue box,, enter your administrator's password and select "Modify Keychain" or just hit return, as it's the default entry.
I found a restart was in order before it recognised everything and would accept https pages without alert boxes, but YMMV.
Funnily enough - and this is where it seems counter-intuitive, if you do click on the padlock and unlock the System Keychain, "Paste" is greyed out in the Edit menu and cmd+v has no effect.
Exactly the opposite to what I'd expect..

Okay since last apple software update my safari will not open youtube,yahoo or google

Okay since last apple software update my safari will not open youtube,yahoo or google, an error message comes up saying safari cannot connect to the server. Can anyone help me with this please?

Hi Joshua ..
Check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari to test.
If that wasn't the issue, try using OpenDNS.
Use OpenDNS for better speed, more security, prevents the, "can't connect to server" issue, includes anti phishing filters, prevents browser re directs, and it's free.
Open System Preferences / Preferences then select the Network tab. Click the Advanced tab then click the DNS tab.
Click +
Enter these addresses exactly as you see them here.
208.67.222.222
Click +
208.67.220.220
Then click OK.
More about OpenDNS here.
Topic : Manually provided DNS server addresses are higher priority than DHCP's

How to opt out of Apple Software Update's Safari installation

I do not have Safari installed on my computer, and I have no interest in installing it or switching to it. However, the Apple Software Updater displays Safari as a selected option every time it runs. I can unselect the option to install Safari, but I don't see any way to remove Safari from the list entirely so that Software Update doesn't keep pestering me about installing Safari every few days. Surely there must be some way to opt out of installing Safari short of uninstalling Software Update and never using it again?

That answer really does not deserve a "solved" star, as we get nagged again for every update of Safari. The ignore "trick" is IMHO merely an inadequate workaround for a nuisance that should not exist.
ASU should UPDATE not shove software I or rather, my userbase does not have installed, down our throats.
Apple should at least have the decency to NOT have Safari Pre-checked in ASU. Yes, M$ has new software in Wondows Update as well (e.g. Silverlight), but at least it's an opt-in update, while Apple force-feeds us Safari which I find beyond annoying.
If M$ would do the same with the next version if IE on Macs, Mac users would scream so loud you would be able to hear it on the ISS.
Max G. Schmitt
Systems and Network administrator (MCSE)

HT201412 My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

My ipad has a software problem and does not work, request that it is loaded the software and there is no way that the operating system loads, is not restored. WHAT SHOULD I DO?

This is an iPad user to user forum, so you are not addressing Apple. Depending on how many user helpers are on-line, it may take several hours, or longer, to get a response.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

TS1717 i have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me it told me your software is up to date and close

I have a windows vista and i tried downloading the newest version of itunes and it said it wasnt installed correctly.How can i reinstall it because i went to apple software update and it didnt let me,it told me your software is up to date and then closed on me,please help.

it said it wasnt installed correctly
What's the precise text of that error message, please? (There's a few different ones I can think of that you might be getting.)

TS3694 sirmy iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

sir my iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

I just ran an Apple software update and lost video in my Final Cut 7 running on OS 10.6.8. It is indicating a codec problem. Any ideas on how to fix this?

I just ran a software update and lost video in my FCP 7 timeline (OS 10.6.8). I get an error message that there is a codec problem and get either a green or black screen. Anybody have idea how to fix this?

what happens if you create a new apple prores 422 sequence and drop bars and tone into it.
Does it display correctly? If so, I'd assume the the prores codecs are ok.
Not sure I"ve worked with hdv2 material. You may need to reinstall your os and fcp and not do the latest software update. People have definitely reported problems with hdv material after the update. Maybe someone will speak up with an alternative solution.

Apple Mail and Safari not working, other browers fine

Apple Mail suddenly won't download mail, it spins and spins, but gets no mail. It also won't quit, I had to force quit several times. And Safari has become sluggish, can't even load a page. I tried reset, it made Safari work to load one page, but since then won't load any more. At the same times, Opera. Chrome and Firefox work great, very fast.
And ideas????

Regarding Mail, does the spinning beach ball start when you click on specific messages? Spam messages, perhaps? If "yes," you need to create a rule that deletes these messages. You want to select a characteristic that is sufficiently broad to catch the offending sender every time BUT is also sufficiently narrow so that legitimate mail is not deleted.
One example that I found is sender includes:
.info
That catches most of the messages that were causing my wife problems and we certainly don't know anyone named John.Info. Of course, if we ever do get a friend with that name, we've got a problem.

IOS 5 update fail - apps and Safari not working

i completed the iOS 5 update and now none of my apps work. Also, Safari is locked up. Any ideas of what I need to do?

Any thoughts? Any internet based program besides email cannot connect.

Ipod Update and Windows - Not Working. 1.1.2. Downgrade?

I installed 1.1.2 on my 160GB yesterday and it has basically ruined my ipod. Something is wrong with the windows version of this update. I can get itunes to recognize it only if I put the ipod in disk mode. But then when I disconnect it from the computer it will just go to the apple logo screen and repeatedly reboot itself until the battery dies. I took it to the apple store and they got it working by doing a restore on a mac. When I got back home, I restored to Windows and it's back to the same problem. So something is wrong with the update. I also tried restoring on a different windows PC just in case there was something wrong with my download. It didn't help. Same problem.
Anyone else have this problem?
How can I get back to the old firmware. It would have been nice if apple would test their software BEFORE they released it.

As one who is running Windows XP, I updated to 1.1.2 absolutely smoothly yesterday. I waited to see if there was a consensus as to any pervasive problems - the fact that there are so few posts about this update indicated to me there are no major issues. There seems to be nothing inherently wrong with the Windows version of the update. Are you sure you are allowing the update to complete before disconnecting it from the PC? I always wait for the iPod to reboot and run another complete synchronization before disconnecting it.
To Downgrade your firmaware:
Disconnect your iPod from your PC and shut down iTunes
Delete the files for the version 1.1.2 from your PC. In Windows XP they can be found at C:\Documents and Settings\<username>\Application Data\Apple Computer\iTunes\iPod Software Updates. Make sure you have the files for the previous version of the firmware.
Start iTunes and disable checking for updates automatically (Preferences > General)
Connect your iPod and click the Restore button. You should be asked if you wish to load an older version of the firmware (answer yes).
Let the restore do its thing
Resync your iPod
My guess is you will need to put the iPod into disk mode first, since you say that this is the only way it will be recognized.

Did a software update, and safari won't even launch now. Crash crash crash.

This morning, my iMac ran an automatic software update. Now everytime I launch Safari 5.1.2, it immediately crashes.

Dex...
Could be a third party Safari add on that was compatible with the prior version of Safari that's causing Safari to quit.
Troubleshooting help here > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
And try deleting the Cache.db file.
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder to the Trash restart your Mac, try Safari.
~ (Tilde) character represents the Home folder.

10.5.6 install firefox and safari not working?

I was sitting on my couch while 10.5.6 updated, it finished restarted and now I have no webpage access. I still can get my email thur entourage and mail. Airport and Ethernet work just fine but neither browser will load pages. It won't even check for software updates from Apple or Microsoft. Any thoughts?
Message was edited by: wilsonm73
Message was edited by: wilsonm73

Any thoughts? Any internet based program besides email cannot connect.

Software update 6500, device not working anymore!!...

Hello,
Brought the mobile (6500 slide) yesterday and today its with local dealer for repair.. whats wrong with Nokia software update application!!!!!!
following error pop up during the application launch,
Error #1
nsl_host_process.exe - Application Error
The instruction at "0x00e17510" referenced memory at "0x0001c004". The memory could not be "written".
Click on OK to terminate the program
Click on CANCEL to debug the program
OK Cancel
Error #2
NOKIA service layer host process has encountered a problem and need to close..
application restarted many time and error repeats, once it didn't pop up and error and i started to update the mobile..
during the update windows pop up with found new hardware and there you go,.. previous errors are back and the mobile doesn't respond anymore,...
Operating system Windows XP, and matching all the configuration requirements according to Nokia,
anyone had a remedy for this??? does anyone ever did firmware upgrade nokia 6500 using software update application??
thanks
Deskey

Its solved. i guess it was all related to Windows Problem or anti virus Problem.
XP re installed and the software works just fine..however the mobile is already with the local dealer for update the firmware. will do it again once it back on my hand!!!.
thanks for your sympathy though!
Desky.

Apple software update and safari not working

Similar Messages

Maybe you are looking for