Apple software update problem *please help

i cant use the software update
this has been going on for over two months
i cant connect to the server
please help

The IP of your Software Update Server looks strange, not sure if it's correct or not. But it looks like a hamachi IP (VPN).
Not sure though.

Similar Messages

HT1222 The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?

The new IOS 7.0 version for my iPhone 4S keeps telling me its unable to verify software update. Please help?

Go to appleid.apple.com. Log in with your Apple ID & password. Update your contact information.

Why is my ipad doesnt have a software update?please help,i cannot find it.. :(

why is my ipad doesnt have a software update?please help,i cannot find it..

The ipad 1 (no camera) can't be updated beyond IOS 5.1.1.

When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
Next, select any Bonjour entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
http://www.apple.com/itunes/download/
Does it go through properly this time?

Apple Software Update problem on Windows 8

Hello everyone,
After I updated iTunes to the 11.0.3 version I receive this weird error message from the Apple Software Update application:
I deactiveted my firewall and Windows Defender in case they were blocking it,but unfortunately I had no success.

Have you tried to uninstall & reinstall iTunes???
How to uninstall iTunes in Windows 8 - Microsoft Community
Then reinstall here: www.apple.com/itunes/download
Requires the 64-bit installer.
Hope this helps.

Running 10.4.11 I can not find the outdated plugins that Firefox keeps telling me I need. Apple Software Update doesn't help with this

I'm running 10.4.11 and am unable to find the plugin updates that Firefox keeps telling me I need on an annoying little popup window that keeps coming up whenever I download a page using Firefox. The pluin updates I need are for Quicktime, Java to name a few. Is Apple not supplying any more plugin update because I'm using an old version of Mac OSX? The firefox plugin page tells me that Apple supppies their own plugins but I don't see any when I use Apple Software Update. Any suggestions?

Do what others do and get TenFourFox - the equivalent of the latest Firefox but built especially for PPC: http://www.floodgap.com/software/tenfourfox/
To enable plug-ins:
Put about:config in TenFourFox's address bar and hit return
Put tenfourfox.plugins in the search box and hit return
Click tenfourfox.plugins.enabled to set it to true
Restart TenFourFox
TenFourFox will now use the Safari Flash plug-in

TS3219 I have purchased new songs from iTunes and they are in my Library, however I cannot transfer or download the new songs to my iPod..I believe this is a new problem maybe since I downloaded the new Apple software update...HELP ?

I have recently upgraded the new Apple software and now when I purchased new songs they show up in my tunes library However, I cannot transfer or download them to my iPod shuffle...any help is appreciated..my son is having the same problem downloading to his iPhone 4.

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
An Added Bonus is that you will have a Backup of iTunes.

1 year old MacBook Pro wont let me do a software update. Please help :(, 1 year old MacBook Pro wont let me do a software update. Please help :(

Hi everyone,
I purchased my MacBokk Pro a little over a year ago brand new from an Apple store. As of a few month ago it refuses to do a software update. It says it cant connect because of a network problem, but when I run a network diagnostic it says there is no problem. Please help me

No specific update. Just trying to check for software updates and it wont even let me check for one. I know there will be many updates to do because it hasnt let me check for updates in months

Crash during software update! Please help!

Could someone please help me? I attempted to update my software when prompted, including Leopard and Itunes, but during the restart process my computer froze.
I restarted it and tried to update my software again, but now I get an error message that says "The digital signature for this package is incorrect" and will not let me update. Now, Itunes refuses to open and I have no idea how to correctly update my computer or fix the Itunes problem.
I also attempted to send an error message to Apple and that option is no longer working on my computer either. I'm horrible with computers, but I would really appreciate any advice anyone could provide me! Thank you so much!

repair permissions go to Applications/Utility/diask Utility and verify and repair permission then
zap pram appleoption+pr during a re-start
go to apple.com/support/downloads and download the itunes and 10.5.2 installer.
never use the software updater pane

Mac not working right after software update. Please Help...

I turned on my computer today and first thing I was asked when I logged in was if I wanted to update my software because there is new updates available. So I click on update so my computer will stay up to date......Well big mistake Now I cant open my itunes, my safari, my quicktime player, or even my Microsoft word, everything is messed up I keep getting "program quit unexpectedly" from everything. I have been trying everything today to get my computer back to normal, but no luck. I have read something about "permissions not being compatible". I have no idea Im clueless I know nothing about computers. Please Help! I made a big OOOOOOps

It finally powered on after 3 battery pulls, but now it does not make or receive calls (((
Everytime I connect it to blackberry link it says software update available, so I clicked on install, it said downloading update and then nothing happens, the download bar becomes full then nothing changes
I also tried to reload device software, i got a message saying checking repair software and it stayed like that for 3 hours then the device rebooted but nothing happened at all
I even tried redoing the software update from the phone itself 3 times, everytime it would say update successful but the phone would still not make or receive calls
Please help I dont know what to do....could the problem with blackberry link be that im using it on a mac??
I appreciate your help

Software raid1 problems, please help

Hello people
i`m willing to install software raid1 on my home server (archlinux 2.6.30)
i have 2 8.4GB hdds /dev/sda && /dev/sdb
i configuret partitions following wiki & some other tutorials, but so far i`m unsuccessfull
heres what i did
partitioned bouth drives (a & b) identicaly
100mb boot
512mb swap
7800mb /
made raid1 array
mkfs.ext2 boot and / partitions
mkswap /dev/md2 (swap partiton)
when i wrote fdisk -l it showd this
Disk /dev/mdX doesn't contain a valid partition table
wher X is 1,2,3
i have added dm-mod in rc.conf mkinitcpio.conf but nuthing works
when i try to boot sistem it says this
::Running Hook [raid]
md: raid1 personality registred for level 1
waiting 10 seconds for device /dev/md3 ...
root device '/dev/md3' doesn't exist, attempting to create it
ERROR: Failed to parse block device ids for '/dev/md3'
ERROR: Unable to detect or create root device '/dev/md3'
You are being dropped to a recovery shell
type reboot to reboot
type exit to continue
when i type exit, it starts to panic...
ont thing i`m woried about is that, when i partition my drives and enter setup, i should skip partition part, but when i want to select packages it says that my drives are not partitioned - is this how it should be ?
Please help me, i realy need to get this working.
allso i`m wondering what jumper settings should i use on bouth drives?
i have read that puting /boot partition in raid couses problems, is that true ? because i have /boot in raid1 allso..
my best regards
karlis.
Last edited by karlis (2010-02-25 14:41:09)

You can lock this topic, problem solved
i used these topics to fix it
http://bbs.archlinux.org/viewtopic.php?id=56830
http://bbs.archlinux.org/viewtopic.php?id=28367
and most of fix i got from here
http://bbs.archlinux.org/viewtopic.php?id=56830
Thanks

10.4.10 Update Problem-- PLEASE HELP!!!

I have a 17" Powerbook 1.33GHz. I just installed the 10.4.10 update. Now the computer wont boot on a power adapter. I had problems after the first update with changing state while the computer was asleep (ac adapter to battery) which would result in black screen and forced a hard reboot. Now when I try to power-up the computer from the restart (or regular reboot) it just doesnt boot. Please help if anyone has any ideas. I dont mind even if there is a way to undo this update.
Jacek

Alright - I think my computer is good again. Here is what I did. I dont know how much of this will actually do anyone any good, but I figured if I listed it all step-by-step, maybe it would do some good to someone.
1) Restarted with AC in. Didnt boot - black screen
2) Restarted with no AC in. Booted up ok. Restarted again (I guess it was a double restart) Booted again alright.
3) Plugged in the AC, computer froze :-\
4) Did a powerbutton hard reboot (5 second hold down)
5) Computer died - I left if at office overnight. (By died i mean wont boot with AC adapter)
6) Computer turned on fine in the AM. Some of my Brother drivers got a little fudged, so I had to reinstall them. Needed a restart (on AC)
7) Didnt restart (black screen)
8) PMU Reset
9) So far so good...

Apple Software Update Problem

Hi, my Software Updates stopped working, it starts, but with something like 5% of checking new updates completed, it stops, and stays like that, nothing appears, any one have anything like this?
it's a macbook white, nothing outside normal installed.

See if this helps.
First:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Second:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder)

Iphoto update problem-please help

Hi everyone,
everything started trying to look some photos out of a CD (200 JPG files) I was trying to import them to my library but the program crashed or stopped everytime at photo number 31. I was using Iphoto 5.0.4 so i decided to update it to 6.0.3 version but when I select the destination (Macintosh HD; 55.8 GB-35.3GB Free-)
I got a message saying:
You cannot installed it in that volume because the eligible iphoto application was not found in the location / Applications/iPhoto.app
I looked, and the iphoto is under applications, now I'm not sure if I have memory space problems or what, could anyone please help me?
I am not familiar with this, so I'll appreciate any advice.
thanks

Hi panis,
iPhoto 5.0.4 is the last update to iPhoto 5. To
update to 6.0.3 you have to purchase iPhoto 6 (part
of iLife 6) first, then update to 6.0.3.
thanks for the answer,
but i am still having problems using the iphoto 5 then.
I try to import the photos I have in a CD but the program blocks and I'm lead to force to quit when working on it.
I don't even can see the photos all the photos from the CD in thumbnail version, and I've tryed in a PC computer and I am able to see all of them. memory problems?
the computer is asking lately to quit an application or to restart it.
any idea?
ibook G4; 1.42 GHz; 512 MB Mac OS X (10.4.5)

Major Update Problem - Please Help

Forgive me if this topic has been covered before, but its late here and I don't have time to trawl through the forums.
So, here's the deal. I purchased the iPod Touch software update (the one that lets you use apps) for $12.99 and I was told, after purchase mind you, that all of my songs and playlists would be deleted if I installed the software. The problem is that the playlists only exist on my iPod Touch and I have songs from so many versions of iTunes that I have lost count (my friends and I share songs all the time), therefore if it is all deleted it will be nearly impossible to piece my iPod back together. Is there a way to backup all of my iPod's data with iTunes so I can restore it after the update?

Forgive me if this topic has been covered before, but its late here and I don't have time to trawl through the forums.
So, here's the deal. I purchased the iPod Touch software update (the one that lets you use apps) for $12.99 and I was told, after purchase mind you, that all of my songs and playlists would be deleted if I installed the software. The problem is that the playlists only exist on my iPod Touch and I have songs from so many versions of iTunes that I have lost count (my friends and I share songs all the time), therefore if it is all deleted it will be nearly impossible to piece my iPod back together. Is there a way to backup all of my iPod's data with iTunes so I can restore it after the update?

Apple software update problem *please help

Similar Messages

Maybe you are looking for