Apple start up logo will appear, but nothing else.
The apple logo will only appear when I plug it into the computer then it will go away and nothing else will appear.
HOW TO FIX.
Hey Gabe013s,
Welcome to Apple Support Communities, and thanks for the question. I found the following documentation on what to do if only an Apple logo appears when you turn your iPod nano on:
If this happens, the iPod software may have been damaged. Put iPod into Disk Mode, then restore or update iPod's software.
Put iPod into Disk Mode.
iPod should appear in the iTunes Source pane and on the desktop or in a Finder window, or in the My Computer window.
If a message appears that says the volume could not be mounted and asks if you want to initialize the disk, choose to initialize iPod's disk. Use Mac OS Extended format (HFS Plus) if you have a Mac, or FAT32 if you have a Windows PC.
Warning: This process cannot be undone. All of your songs, videos, and other files will be deleted. Always make a backup of your important data.
Follow the steps to update or restore iPod. If you manually put iPod into Disk Mode it may need to be reset before you can use it.
If you cannot put iPod into Disk Mode after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
iPod only shows an Apple logo and doesn't start up
http://support.apple.com/kb/ts1399
All the best,
David
Similar Messages
-
i have a nano 4th generation 8gb i have tried resetting it, i get the apple logo come up but nothing else happens. It will work in my docking station but as soon as i take it out it will not respond. any ideas, do i need a new battery?
It definitely sounds like your Nano needs a new battery at this point. You can have Apple replace it for a flat fee, send it into a third party service center to be replaced for much less, or you can purchase a new battery online and swap it out yourself if you feel up to it.
B-rock -
When I start iWeb only the Navi Bar appears but nothing else. What to do?
when I start iWeb only the Navigation Bar appears but nothing else and I can't use the program. I have the latest version and I use iLife11
Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
Lastly, select an album in iPhoto and use the Share ➙ iWeb ➙ Photo Page menu option. It might take a couple of tries.
OT -
When I turn it on the apple appears but nothing else happens??
I have Ipod touch when I turn it on the apple appears but nothing else goes on help??
What happens if you try a hard reset? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
If its still stuck at the Apple logo, try connecting it to your iTunes library in recovery mode and restoring it.
http://support.apple.com/kb/ht1808
B-rock -
Hi
i have a Mac book little bit old .and I use LR5
when i want to use the defat correction tool , i open the tool , i choose "correction" and then i clic on the defaut
a second circle appears but nothing else happens . No correction
do i miss something???
ThanxIt's sounds like you're using the Spot Removal tool. What happens depends on the Feather and Opacity controls. If the Opacity is at 0, you won't see any change. 100 will give the full healing or cloning, while feather controls the size of the edge of the healing.
-
At App Store I see that Facebook needs updating. However, when I click on "update" the blue circle appears but nothing else happens.
The blue circle should go around, clockwise, as a fine line, and then as a heavy line indicating it is downloading. Then it sits while the install takes place. It may sit and wait to start the download if the internet connection is slow.
-
My iphone 4s got wet and shows the apple logo when charging but nothing else?
When i hold the home button in and its on charge the apple logo will appear for 5 seconds then go but nothing else, with out being connected for charge nothing happens.
It's water damaged. It is not in warranty. The warranty was voided when it got wet.
The replacement phone will inherit the balance of the original warranty or 90 days, whichever is longer. -
i need help with my ipod touch first generation
wont turn on except show Apple Logo then turn off
what do i do?Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Well, i forgot my ipod touch in the car, and it snowed so bad and the temperature drop below zero. I thought my ipod was just battery dead, but when i charged it, only the Apple logo comes on and then blank screen. How can i reboot, or reset?? is the battery affected even though the phone wasn't wet??
As long as no moisture got in it... 1st thing to try is give it a few hours to warm up and fully charge the battery, then see if all is working by turning it on. Cold can effect the function. If still not working try a soft reset. Press and hold both the power and home buttons together until the Apple logo appears, about 15 seconds. Then release both buttons. If that does not work connect to your computer via cable go into iTunes and try Restore from backup. If all else fails, Restore to new. If that doesn't work contact Apple Genius Bar to have your iPod evaluated. Good luck.
-
G5-10.4 Desktop appears but nothing else
I went to startup here at work this morning, and only my desktop has appeard. There is what appears to be a search icon in the top right hand corner of the screen and the pointer turns to the color wheel when I move across it. I have seen it do other things, but not this one. Please advise, so I do not just make it worse by trying things that will only mess it up more.
Thanks!Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
Cheers! DALE -
When I switch on my new iPad it asks me to move the slider to begin set-up. A list of languages appears and I tick English then NEXT. Another list of languages appears and the only thing to do is press the home button or BACK. I press BACK and it returns to the first list. I press the home button and a message appears saying that SET-UP was not completed do you wish to retry or continue. I press CONTINUE and nothing happens I press RETRY and it goes back to the message. What am I doing wrong or do I need to connect to I-Tunes to set-up ?
Try to connect to iTunes during the setup.
-
My new iphone 4S camera is not functioning. When I click the phone icon, the shutter appears. Then the screen only shows the shutter. When I go back to the home screen and click the phone icon again. The photo screen only shows a black screen. The button to take photos is locked the entire time. I've turned the phone on and off several times.
Basic troubleshooting steps outlined in the User Guide are restart, reset, restore from backup, restore as new. Have these ALL been tried?
-
i am trying to download snow leopard, but with around 46 mins to go, a message appears saying, my coup is going to restart,it does but with just the apple logo,and white screen, nothing else,can anybody help? jib.
I think we need more clarification.
What do you mean by "download"? Only updates are available as downloads, the System software has to be installed from a DVD. -
My iphone 4s crashed today and will not go back on. I see the apple logo, but nothing else will happen.
Hello jaicob1990,
Try the steps in the article below; it will give you multiple options on how to resolve the issue.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I have the apple logo on my phone but nothing else works
I have the apple logo on my phone but nothing else works, how do I turn the phone back on?
Try resetting your iPhone. Hold the on/off and home buttons together for 6 or 7 seconds till the Apple logo appears.
Maybe you are looking for
-
How do I copy an app from my iPhone to my desktop iTunes?
iTunes tells me there's an update for my iPhone. I click on update. It tell me that there are apps on my iPhone that are not on my computer, and that I should copy them to the computer before updating. I sync the iPhone, and then get the same messag
-
JDBC Sender Adapter - SQL-Statement
Hi, I'm using the JDBC-Sender-Adapter and need to use a SQL-Statement like this: SELECT * FROM myTable WHERE myDate = <current_date> Is such a dynamic-sql possible, or can I only use static sql-statements. And if yes how can I solve this problem. man
-
I can't register my apple care in Hungary.
Sorry to post here, but i couldn't find any other topics related to this. I bought a new MBP 15 and an extended apple care and i can't reach any phone number i've been given which is impossible to reach. The retailer said apple severs are down for we
-
UPS not recognized by Lenovo IX4-300D
Hi there, My new IX4-300D is not seening Xfinity Pro Series 2000VA 1200W Uninterruptible Power Supply connected by USB. QNAP TS-269L on the same subnet has no problem seeing the same Xfinity UPS. QNAP TS-269L is presently setup as a master. In GUI ad
-
Problem installing cs5.5 - exit code 6
Hi everyone, I'm trying to install cs5.5 web premium (upgrade) on windows xp sp3 but have some trouble. Every program of the suite install right but not acrobat. At the end of installation I receive the error below. I try to solve reinstalling and fo