Apple stays on setting time and date after restore
apple tv stays on loading setting time and date
It is having trouble connecting to the network. Make sure location is set correctly. DNS should be on automatic (settings - general - network). If on wifi try ethernet.
Similar Messages
-
Why my atv can't set time and date after restoring it using itunes ?
when my atv restarting after I restored it using iTunes, it can't set the time and date.
the atv is connected to the net by wi - fi.
when I try to sign in using my apple id, I get a massage that the password is incorrect.
I have apple tv with ios 7.The network and signal test on device won't give the full picture, for that you need a network report. Go to istumbler, netstumbler or similar, that will show true signal strength as well as any nose detected. You can also try Ethernet to help rule out WiFi issues.
-
Date time Apple TV
Welcome to the Apple Community.
If this is a new Apple TV, in addition to trying the steps already taken, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
How long should setting time and dates take?
I have hooked up my apple tv, and it is still "setting time and date" after 2 hours.
How long should it take?You have a network problme. ATV is not able to connect to the internet, so it is not able to set it's date and time.
-
Constantly being asked to set time and date (Apple TV 2nd Gen)
I am constantly being asked to set time and date on my Apple TV 2nd Gen. Has anyone had this problem? I get the screen with this message about 10-15mins after I connect to my home network. I connect, everything works fine, but then streamin, browsing stop and this screen appears. Any help would be appreciated.
Thanks!!what if you try something simple as to restart your phone and check again.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
I have an apple tv about two years old. Bought for a present and they never took it. I tried to hook it up cut it get stuck on setting time and date. Any help?
If you can view the main home screen, try selecting "settings" on the far right, then choose recent at the bottom. If not, try just unplugging power for a few minutes, then plug in and try again. Keep in mind you'll need a wireless connection and there may be several updates. Hope this helps-
-
im trying to set up my apple tv just after ive updated to the latest version, but it wont pass the setting time and date screen
what can i do?
HELP!Hello john.george,
You may need to verify that TCP port 123 is open and available for use on your router.
TCP port 123 is used to communicate with a network time server.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen -
KDE: Setting time and date automatically
I've never been able to set the time and date automatically in KDE time settings. When I check the "Set time and date automatically" and authenticate myself, I always get the error message "Unable to contact time server: .". I'm wondering whether it's an upstream bug or I'm missing some required package? Does it work for you?
matt101 wrote:I don't get it i have installed ntpd using pacman -S ntp . And then after it installed I restarted my computer and i still can't change the time to London and am still getting the "Unable to contact time server" error. Am i misinterpreting this or what? Could somone please explain to me in simple terms how to make the KDE clock show London time?
Have you set ntp correctly?
Also go to http://www.pool.ntp.org/en/use.html you'll have all the answers there.
in short try this:
ntpq -p
If nothing happens you did something wrong, if it does, then it already works just remove ntpd or openntpd from daemon array. -
just installed my Apple TV and it's been in the activation screen to set time and date for a while .
not sure what the issue isIt's not properly connected to the network
Make sure location is set correctly
DNS should be on auto (settings - general - network)
If on wifi try Ethernet
Check that router has port 123 open (refer to manual if unsure) -
Unable to reset time and date after a software upgrade
unable to reset the time and date after a software upgrade on the TV
hello
I'm having a similar problem with my macbook. I just did a software update and now I can't get onto my internet. I checked the network diagnostics and the connection is fine, except when i click on the safari icon nothing happens.
Can anyone help with this?
Thanks! -
Nokia 6230i forgetting time and date after 1sec ba...
Im used to that my 6230i and other nokia phones remember time and date after a sim card switch. The 6230i has now however started to forget time and date after sim card switch or just 1 sec battery removal.
What is the problem and how can it be fixed?
ThanksHi heraldo
There is I think a capacitor used to hold sufficient charge and this may now have failed. Entry level Nokia phones no longer retain time and date at all if battery removed.
Is your phone still under warranty?
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
What is the font Apple uses for the time and date on the lock screen in iOS 7?
I can't find the answer on Google. What is the font Apple uses for the time and date on the lock screen in iOS 7?
This font. It's weird, it looks different when viewing the screenshot on my iMac, than it does on my iPod touch. Probably because of the retina screen of the iPod.
-
Setting time and date on Apple tv
After I restored my Apple TV I can't access it, because it stuck on " setting date and time". I tried to set the time and date
manually but it wont work. When I type my Apple ID to test the network or for home sharing it says wrong I'd or password. I have restarted my Apple TV but
no luckSetting date and time
-
Set up time and date is not working, since I changed settings from Saudi Arabia to USA...want time and date from USA?!
You need to set your location to where you are, not where you might like to be.
-
I have to reset time and date after booting
My mac pro cannot hold date and time.
so far, I have replaced the pram battery and done the pram reset several times.
at first i noticed that the sys pref panes were unlocked when I went in to change the time and date but I have since cured that in sys pref/security.
the governing factor seems to be wetherr or npt is a revoot or completely cold boot (mains power switched completely off)
the expected message comes up i.e. " your system clock is set to a time and date before 1.1.2008 some progs may bave erratically blah blah "
the actual time has reset to 1.1.2001 ( dont know if that is significant but mentioned it just in case).
So, if i just shut the machine down and then boot it up again, no probs
if i restart, no probs
shut down and pull the plug ?? 1dt, Jan 2001
would appreciate some adviceClick here and ask. If they tell you to call, and they probably will, accept that.
(123024)
Maybe you are looking for
-
How to add "Product Unit" while entering a new price for a product?
Hi All, I recently created a product in CRM.(in web ui) .Then I navigated to the Price assignment block anc clicked on New.In that under the "rate" heading there is a field "Product Unit" for which I have no value in search help maintained..Now, how
-
J2SE 1.4 Samples - Build Problems
Hello. Problem Summary ============= I'm having problems compiling and building the tutorial examples for J2EE 1.4. I believe I have followed the advice given in the tutorial correctly (allowing for the tutorial's incorrect specification of the sampl
-
I can't upload any new songs to my iCloud. Wen i try i get either ''unknown error 4001'' or ''unknown error 4010''. Any fixes???
-
Hi, I am working on a Decision Support System project. I need to load flat files into Oracle tables through SQL * Loader. And the entire process should be invoked through JAVA front end. How do I go about? I will deeply appreciate any help. Raghu.
-
Mic can't hear directly from speaker
pls help me, my laptop compaq V3754TU sound from mic can not hear on speaker. i try check at sound properties, mixer device "conexant HD Audio output" on the PLAYBACK SHOW THE FOLLOWING VOLUME CONTROLS: check box for microphone not have... :-( . only