Apple Studio 21 blue/white does not work w/ 266 G3

Help:
I just picked up a free Apple Studio 21 blue/white ( my 1& 1/2 year old 19 electron blue stopped working ) and I can't get it to work on my G3 mini tower
Thank you
Mike

Similar Messages

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

The Game Center app is pre installed and cannot be removed from the device.
Best thing to do is move it to the last available screen.
Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
Press the Home button one time to stop the apps from jiggling.
For the Apple ID issue, try resetting.
Tap Settings > General > Reset > Reset All Settings
Then try your Apple ID and password for the Game Center app.

I bought the last apple wire keyboard , but it does not work with my usb ..

i bought the last apple wire keyboard , but it does not work with my usb hub why ?
the only way it works its when connecting it thrue my powerbook usb ...
the problem is i HAVE TO USE IT THRUE AN USB HUB ... do you think its because my hub is cheap ? 10 $ .... i 've been told that it comes from the fact that i need an auto-alimented usb hub ...?.
suggestions gentlemen ?

I have eyes everywhere. Two of them can see the word "Paris", right below your name, at left.

New Apple Keyboard Launchpad F4 key does not work

New Apple Keyboard Launchpad F4 key does not work
Hi, I have now got ne new wireless keyboard because my old one broke. I connected the keyboard, the F3 key (Mission Control) functions, the F4 key, especially for Lunchpad does not work, I'm Lion on it, previously on the old keyboard I had in 2009, he occupiedwith Launchpad F5.
Have System Preferences / Keyboard / Keyboard Shortcuts reset everything goes ......... but not yet!!
Maybe someone can help me!!
Thank you
greeting

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

Ipad airplay (mirroring) via apple tv on samsung tv does not work at all

I try to mirror my ipad (version 3) with the latest IOS via apple tv (version 2, latest IOS) on to a samsung tv. It doens't work. Although i'm able to select airplay on my ipad it won't show on the samsung tv. Apple TV is working, i can watch movies etc. I tried all the things i found on google, like renaming the HDMI Input to PC etc.
Any suggestions?

doesn't solve my problem. As i mentioned, i have IPAD Vers. 2 with the latest IOS, Apple TV 2 with the latest IOS. Apple TV is working just fine on the samsung TV, IPAD shows Airplay sign, which i can select, but there is neither sound nor video ( it doesn't matter if i start playback before i select Airplay or not...does not work) Note: i have as well a beamer at home, when i connect apple tv with the amplifier, everything works just fine, Airplay with IPAD, IPHONE, MacBook....Just not with the freaking Samsung TV...

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

Taking Z1 back to shops!! going back to Apple: Sony Bridge for Mac does not work

Been an Iphone owner. really, really wanted to try a good android phone, and the z1 looked the best. However
I have had the most frustrating experience- this junky bridge software looks slick but it simply does not work on a mac .
I have spent nearly a week mucking around on forums, reading technical 'get arounds' this is a £600 phone and its not good enough. It might be Apples fault for being so locked down, but sony should not claim it works when it has so many issues.
1) it spent 3 days trying to load my media. It eventually got stuck on 10 min remaining. I pulled the cable.
no contacts had even been added, however 1/2 the photos have, but they are a little jumbled up from when they were on my iphone.
2) i try to download the lastest sony for Mac update 3 times- it cant even do this and gets stuck
3) i then try to update the z1 with the latest software, again this also it gets stuck and hangs. OMG how can i update my software, do i have to buy a PC to go with the phone.
im annoyed now and cant play with my new phone
4) connect phone again and just ask it to do my notes, messages and contacts. This seems to work , but all the messages to my Girfriend are completley missing?? why?
5) i try to load a few folders, the pictures on the bridge pop up window seem to freeze , ai cant even drag these across, the same happens with my music
6) i have a lot of photos on my mac form my iphone 3000. If i choose to load them it only allows me to load all of them and not browse.
can i avoid bridge and view my z1 as a drive? also why wont any of the software update?
the next thing is it seems to have infected teh mac, the new version f itunes will not install correctly!! this is very unusual.
some one please helpme before i rant in my blog!

Hi Inventsc,
I apologize for the late answer. I'm sorry you haven't had a pleasant experience using Bridge. We are aware of the problems you mention and are working on it. As mentioned, you can connect your phone in MSC (mass storage mode). To do this, disconnect the phone, find USB connectivity settings and set it to MSC mode before plugging it in again.
Again, I am sorry it's not working properly for you.
Best Regards,
David

Non-apple keyboard and aperture recovery does not work

Hello all, I use a mac mini with a non-apple keyboard and I am trying to recover my Aperture database, however, although the alt and command key work in all applications, the combination does not start up Aperture in recovery mode. Anyone any ideas? Thanks.
regards,
Douwe

Hi,
Your migration to Lion brought over a previous hot key preferences document. And this contains one bad key that wasn't updated.
- Quit System Preferences (if open)
- Delete this document to remove a carry-over mapping error.
- Then logout
Note: That this will delete any existing modified keyboard assignments. Re-assign changes manually.
Note2: This document is in your users preferences folder.
~/Library/Preferences/com.apple.symbolichotkeys.plist
-Alan

HT202157 Apple TV update 5.2 does not work for device

This is the second time and second device that the Apple TV update did not work. Please help.

Welcome to the Apple Community.
If you are using ethernet, try the update with wifi.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Blu-ray does not work after update to windows 7

Hi, couple months ago I have installed windows 7 on my HP Pavilion dv5-1070ew (previously there was pre-installed Vista). I've installed the newest version of HP MediaSmart DVD (4.0.3822) downloaded right from HP.com but unfotunately, when I'm inserting a BLU-RAY Disc it's not being played. HP MediaSmart DVD opens and it writes that "Disc is ready to play" (so it is able to see the disc), but when I click button "Play", the monitor starts to wink for a while and then nothing happens...
Thanks in advance for any help
This question was solved.
View Solution.

I would suggest downloading trial version of cyberlink power DVD from here http://www.cyberlink.com/downloads/trials/powerdvd/download_en_US.html?affid=2581_853_290_12410_0_EN... and check if we till have the same issue.
But before doing that, I hope after the change of OS, you have installed all the required drivers like chipset, graphic, etc....
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

E-studio 160 network printer does not work correctly in my office network

Hi Toshiba support team,
I'v got a Toshiba e-studio 160 network printer/scanner/fax in my office and I want that everybody in the office (network) has access to the printer and scanner functions of the e-studio without using a "Server computer" which should be connected to the local parallel port of the printer. In other words, the printer is connected over TCP/IP and a suitable RJ45 cable to my main-switch in the office.
The printer in configured with a valid IP-address but in my office I havn't got any WINS-server, so this configuration field is empty and unused. I tried several different methods but I can't get access to the Printer via TCP/IP. Just the "PING" command works correctly. I expected that the printer will appear in the Windows-File Sharing Folders, but it doesn't. By the way, all my computers are equipped with Microsoft Windows XP. I read somewhere in a board that a guy fixed this problem by using a program called "P2P" but I couldn't find something like this.
With the original Toshiba drivers it is only possible to operate this printer local or over a Windows Print-sharing function but I don't want that one machine is running all the time.
I hope anybody can help me with my issue.
Best regards,
Michael

Since this is a forum only for Toshiba notebooks and Options, I doubt someone will be able to help you.
But I found a special Toshiba page for Printers and Copiers.
http://copiers.toshiba.com/support/index.jsp
Maybe you will find some details there.
Good luck

I recently changed my Apple ID password, but it does not work on iCloud. How can I fix this?

Yesterday I changed my Apple ID password. Now iCloud keeps popping up now and then telling me to log in. And I enter the new password and it doesn't work! I am 100% sure that I am entering the password correctly. That popping up of iCloud is so annoying

Try to:
1) Login on www.icloud.com and see if it works from there
2) Remove you iCloud account from the Mac, and readd it
3) Reset your password again: http://support.apple.com/kb/PH2617

HT3180 I have reset my apple tv but it still does not work

I have a 3rd gen apple tv with the aluminum remote, I have reset it but I still only see flashing graphics and can not see the main menu?
Any suggestions?

Thank you I tried the reset again did not fix- I think I am down to calling Apple and paying for a tech - phone company says it is a software problem. I just updated to 8.1.3 - I thought the update might fix it.

HT2204 I am trying to restore my I Pod and it ask for my I tunes password, how do i find my I Tunes password I have tried my Apple ID password and that does not work

I am trying to restore my I Pod. In order to do so I have to have an I Tunes paswword how do i find out what the password is

recovery mode
open itunes on computer
plug cable into computer not phone
turn phone off
hold home button and plug cable into phone. do not release home button until an itunes graphic appears on device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808
if it says turn find my device off can be done at icloud.com or on the device settings - icloud - find my device

I have an old Nano and I am attempting to transfer the music to my new iPhone. I have a new Apple ID for the iPhone (and the same one is used on my IPAD). My problem is that the Nano usesthis old Apple ID and my password does not work.

I cannot get access through the online security as when it requests my birth date, it informs that it is wrong (I got it right). ANd, when i attempt to do it via email, I don;t get the email in either of the only 2 accounts that I ahve ever had.
Any ideas?

Time to contact Apple support directly and have them assist you with resetting the password.
http://www.apple.com/contact/
B-rock

Apple Studio 21 blue/white does not work w/ 266 G3

Similar Messages

Maybe you are looking for