Apple symbol appears on the screen but then nothing
When powering my Apple TV the Apple symbol comes on the screen but then disspears. I think it should then go to the menu but I have a blank screen.
The resolution indicator on the TV changes from 720 to 1080 and then slowly alternates from black to dark grey.
The TV is a Panasonic TXL55DT50B which seems to be working fine in all other aspects.
Can anyone help please.
Hi Defective5,
If you are having an issue with the on-screen menu not appearing on your Apple TV, you may find the following article helpful:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Regards,
- Brenden
Similar Messages
-
My phone keeps freezing, the apple sign appears on the screen and then it freezes again and repeats itself.. has anyone had this before? if so, what is it? & it's also not letting me restore it from iTunes, it keeps coming up with error (9) or error (14).. help?
Hi there Holly N,
You may find the troubleshooting steps in the article below helpful.
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/ts3694
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, or 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
-Griff W. -
Why does my phone cut and the apple symbol appears on the screen?
When I use the telephone, it suddenly cuts and when I look at the phone, the apple symbol has appeared on the screen.
It sounds like iOS has become corrupted on your phone. See: http://support.apple.com/kb/HT1808
If this doesn't resolve the problem let us know and we can try other solutions. -
please help
Try to force your phone into recovery mode. Disconnect it from the computer's USB cord. Turn it off if you can by holding the sleep/wake switch until you see the red slide to off. If you can't turn it off, please continue. Press and hold the home button while plugging it into the computer's USB cord. Continue holding the Home button while iPhone starts up. While starting up, you will see the Apple logo. When you see "Connect to iTunes" on the screen, you can release the Home button and iTunes will display the recovery mode message. http://support.apple.com/kb/HT1808
Then you can restore your phone: http://support.apple.com/kb/HT1414 -
is there any way to retrieve photos off of my phone after it was submerged in water? An apple icon appears on the screen but the phone will not respond
Probably not.
-
i have erased my all phone contact list and then the message comes that it will be deleted with in an hour. but now my phone is not starting and only the apple logo appears on the screen. what should i do now..!
That number is for an apple server in the UK that is used for iMessage activation. A hidden SMS is snet to that number when you turn iMessage on and is used to verify your phone number. I suggest you turn iMessage off. In settings/phone turn on dial assist. Check with your carrier to see if you can send an international SMS as you end that possibility to activate iMessage. Rest your phone (Hold down the Sleep/Wake button and the home button together until the apple logo appears (ignore the ON/OFF slider) then let both buttons go and wait for device to restart (no data will be lost).) then turn iMessage back on.
-
I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
How can i use the facetime, its appearing in the screen but i cannot use it.
http://support.apple.com/kb/ht4319
-
I have a iPhone 5s fell into the water and damaged fingerprint sensor motion and lines of light appeared on the screen, but it still works and did not hurt anything else Can I replace it with a new phone
No. The warranty does not cover damage.
You can only get a replacement if you can talk Apple into selling you and out of warranty replacement.
Allan -
in my i phone 4s all the notification sounds come first.after 4-5 seconds the msg,facebook notifications etc.seems to appear on the screen.But earlier the problem was not there.Earlier with instant sound the notifications were there on the screen.how to Sort out the Problem?
No, sounds like when you dropped it an cracked the screen it may have also damaged the logic board or the repair person damaged a cable.
-
Hi, I've reset my 2nd generation ipod touch. However,the connect to itunes graphic appears on the screen but when I attach to my powerbook it doesn't show up either in itunes or finder. I can't be the first to have experienced this problem. please could someone advise me.
What iOS do you have on the iPod?
Did it every connect to your computer with that iOS?
The latest iOD for the 2G is 4.2.1 and that required a Mac with 10.5.8 or later.
Have you tried:
- another USB port and cable
- iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X -
it has nothing to do with the connection, because even if i try to print a test page from the printer itself (not using my laptop) it still wont print. it says "printing" on the screen, but does nothing. and the green light on the power button blinks the whole time... please please help, its super frustrating, ive un-installed, re-installed, plugged it in, un plugged it, plugged the usb cord in before i realized it wasnt a connection problem, taken the ink out.. i dont know what else to do... again, its not a connection problem.. i tried to go into the settings on the printer itself and clicked printer status or something liek that and it attempted to print out a report, but nothing prints... again, the screen says "printing . . . " but nothing happens and it will continue to say "printing . . . " w/ the moving dots for hours... what could this be?? ive searched online and cant find anything that sounds liek this.. seems like everyone has connection probelms... but i need help!
This sounds like it may be a firmware problem. The first thing to do is check to see if there are any available firmware update. I'll include a link to those instructions below. Next, make sure the printer is plugged directly into a wall outlet. Plugging the printer into a surge protector, power strip, or power backup can cause it to become under powered resulting in strange problems like this one. If the firmware is up to date and plugging the printer directly into a wall outlet doesn't help, follow the steps in the document below. If that doesn't help, you will need to replace the printer. Hope this helps.
Getting the Latest Firmware and Product Updates
The HP Printer Won't Turn On or Respond
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
Weird symbols appeared on my screen. The screen then told me to restart. I did and this happened 3 times. I just did a sage reboot but it has a gray screen andseems to be taking a long time . what happened and how do I fix it??
And now the lined symbols are back!
-
i just bought my iPad 3 days ago, i sync it with my mac and it work nicely until suddenly today it turn dark and nothing on the screen, so i charge it and after few minutes the symbol apple appear on the still dark screen with the down loading sign. I couldn't turn on or turn of my iPad. it's been like that for 3 hours now. I tried to connect it with my mac but it says that the computer couldn't connect with the iPad an error with the device.
Try resetting the SMC
Intel-based Macs: Resetting the System Management Controller (SMC) -
Just "upgraded" to a new ipod touch 5th generation after previously using various ipod classics. So I am not familiar with all the ins and outs of the device. One thing that I have a problem with is the fact that there does not seem to be a simple way, while in shuffle mode to quickly move to the next song or back to the prior song. But forgetting that for a moment, here is my problem and I am trying to figure out if it is a bug or simply some kind of "feature" of the ipod touch that I don't get.
I am playing music...in song - shuffle mode. All of a sudden, instead of the particular song that is playing, a different album shows up on the screen. Meanwhile, the original song keeps playing. When this happens, sometimes that album then starts playing and sometimes I am able to move the ipod touch in various directions and I can get back to the song that I was originally playing. Any idea what is happening here and how to stop it?
Thanks for any help.Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information
Maybe you are looking for
-
How do I use Adobe Media Server 5 on Amazon Web Services?
Adobe Media Server 5 on Amazon Web Services was suggested to my project manager as a way to deal with some of the video we have to host at work, but after signing up and poking around, I'm wondering: how do you actually use it? Is it something that r
-
Getting inline images to stay in text
I'm using RH7 in TCS 1 on windows XP. I have text that contains icons. For example, "Click the add icon (image) to add a new rule to the policy." Sometimes the add icon stays in the parentheses and sometimes it drops to a line all by itself with a
-
Retrieve backed up bookmarks on Ipad
Hi! So recently I backed up my ipad on the PC. Then restored original settings and the back up as well. I don't set my ipad to sync because I prefer to manually manage most of the stuff -- and use the back up function instead. However, while I can re
-
I am trying to select and download the correct version of iPhoto for my mother-in-law's (new to her) iMac that has OS X 10.5.8. Any suggestions on which version to download?
-
Inspiron n7010 graphics+gnome3=fallback mode
Hello everyone, I have a problem. When I tried to install gnome3, it goes into fallback mode. Switching over to the terminal reveals that I don't have 3d acceleration on my card. But I do (works on Ubuntu, anyway). I have an ati graphics card (Mobili