Apple Sync Notifier.exe Bad Image icuin36.dll

I get a Popup at Startup Saying "The Application or DLL C/Windows?System32/icuin36.dll is not a valid Windows image. Please check this against your installation diskette.
The problem started when I upgraded Itunes from 9 to 10. I reinstalled and still the problem is still there.The first popup(corefoundation.dll) I got I solved by downloading the file into the System 32 folder.I downloaded this file and it gives me this message.Thanks ........Jim

Shift the two dlls out of your system32 folder, Jim. Apple Application Support Installers don't know they're there, and that can lead to you getting trouble after an update if the dlls have been updated since then, and iTunes/QuickTime/Safari/Mobile need the newer version of the dll.
Try uninstalling and reinstalling your MobileMe control panel. Does that clean up the AppleSyncNotifier.exe messages?

Similar Messages

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??

Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

I keep getting the error message apple sync notifier.exe entry point not found. The procedure entry point xmitextreaderconstname could not be located in the dynamic link library libxml2.dll, what do I do to get rid of this?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

How do I eliminate the message when starting up PC - Apple Sync Notifier.exe – Entry Point Not Found – The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?

I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?

I get an error message - Apple Sync Notifier.exe that SQLite3.dll can't be located in the library. How do I fix this as it appears each time I power up

When I power up I get an error message for Apple Sync Notifier.exe - can't locate SQLite3.dll. Can you help?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Apple sync notifier.exe - entry point not found:

When iTunes launches the following error occurs:
Apple sync notifier.exe - entry point not found:
Win7 Home Premium. The procedure entry point xmlTextReaderConstName coul not be located in the dymanic link library libxml2/dll
Only Apple device I have is a iPhone3
The above error occures at boot
When I plug in the iPhone the iTunes software starts okay
Running Win7 Home Premium.
iTunes V 10.4.0.80
No updates available
Diagnostics ran okay

Apple Sync Notifier exe- I deleted Mobile Me of my desk top, then at Start up the message would pop up. I uninstalled the Mobile Me program and it is all good now.

When I turn on my PC, I get the message "Apple Sync Notifier.exe-entry point not found. Then I cannot update my apps. what to do?

When I turn on my PC computer I get a small window pop-up that says "Apple Sync Notifier.exe-Entry Point Not found" This message will not allow me to update my I-phone apps. What can I do to remedy the problem??

Try removing iTunes & all of its components, as described here, then reinstalling:
http://support.apple.com/kb/HT1925

Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'

Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'
Please help...need to get newest update so I can activate my new IPhone4. Thanks

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

How do i fix the following message that appears when i open my computer :- Apple Sync Notifier.exe Entry Point not found the procedure entry point sqlite3_wal_check point chould not be located in the dynamic link library SQLite3.dll

Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Having trouble downloading itunes on my computer. i keep getting a error message that reads: apple sync notifier.exe- entry point not found.

Hello, can anyone help me out there? Im having trouble downloading itunes on my computer.
Ikeep getting a error message reading:
#1 applesyncnotifer.exe- entry point not found.
#2 the procedure entry point sqlite3-wal-checkpoint could not be located in the dynamic link library. sqlite3.d11.
#3 service 'apple mobile device' (apple mobile device)
failed to start. Verify that you have sufficient privileges to start system services.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

When starting up my computer, I get a window that says - apple sync notifier.exe - entry point not found. how can i get rid of this window?

When I start up my computer, I get a window that pops up that says * AppleSyncNotifier.exe - entry point not found. it also says the procedure entry point xmltextreadername could not be located in the dynamic link library libxml2 .dll. . What does this mean and how can I get rid of it?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

Error Msg: Apple sync notifier exe entry point not found

Hi. I'm getting the above error message when I log-on to my laptop. I've looked for a solution on the web but cannot find one where the answer/link is still good. Can anyone help me?
Thanks

Thanks for your feedback. Somehow the problem seemed to clear-up on it's own. Since I posted the question on the 7th, I've had to deal with a security issue on my laptop ... it appears that someone continues to break through the security settings on my router even though I keep changing the security settings on the router and making other security changes. I've become obsessed with trying to resolve this. Maybe one of the changes I made in this process helped the problem ....
Thank you again.

? fixing apple sync notifier.entry point not found. Entry point split3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Upon computer start up I receive message: procedure entry point split3_wal_checkpoint could not be located in the cynamic link library SQLite3.dll.
Apple Sync Notifier.exe Entry Point not found.
Anyone have solution?

IIRC, This problem happens when you have a piece of software installed that either doesn't properly register the DLL it uses, or is improperly installed. The draw back is that if that software is runnig when you install the Apple software, the DLL is loaded, and the Apple software doesn't install the DLL because it already finds it, so it doesn't need to load it. Now you reboot, and the other software isn't running, and Apple can't find it's DLL, so you get the error.
You have a couple of options. You can find the DLL in your "Program Files"\"Common..." folder tree and copy it to the Apple folder where it is giving you the error, or you could properly register the DLL with your OS so that it knows where to find it when it is needed. Another option which should work is to remove the Apple software which is giving you the error, perform a fresh reboot (possibly into safe mode) and re-install the application before you launch anything else.

Error message Apple Sync Notifire exe-Entry Point Not Found when turning on my pc

I get an Error Mesage when turning on my PC Apple Sync Notifier exe-Entry point not found. The procedure entry point xmltextreadername could not be located in the dynamic link library libml2.dll. The happened after I connected and sync my IPad.

Try removing iTunes & all of its components, as described here, then reinstalling:
http://support.apple.com/kb/HT1925

Apple sync notifie.exe entry point not found

when boot pc or log in as one of my many users on the PC i get an error message: apple sync notifier.exe entry point not found
the procedure point xml Text Reader Comst name coul dnot be located in the dynamic link library libxm12.dll

Apple Sync Notifier exe- I deleted Mobile Me of my desk top, then at Start up the message would pop up. I uninstalled the Mobile Me program and it is all good now.

Apple Sync Notifier.exe Bad Image icuin36.dll

Similar Messages

Maybe you are looking for