Apple test won't work/spinning ball/opening

My system now opens w/ the following screens,
1. plain white screen for about 2 min
2. next the world globe shows up for about 2 min
3. next I get the Apple about 1 min
4. clicking on any thing brings up spining ball
5. system moniter screen shows before I can get my papge open

Which model version of iMac do you have and which version of OS X are you using?
Hope this helps

Similar Messages

Hardware Test Won't Work!

I have an early 2011 MacBook Pro i5 with 8gb running Mountain Lion and the Hardware Test won't work. Everytime I hold down the "d" key it just boots normally. Since I have an early 2011 Mac I used to have Snow Leopard installed but then I upgraded to Mountain Lion. What should I do?

... the Internet Recovery window wouldn't accept my network name and password.
No idea, but review the chart here: http://support.apple.com/kb/HT4718
If your usual or current Internet connection has requirements or settings not supported by OS X Restore, either change the settings to a supported configuration for the duration of your OS X reinstall, or seek out acceptable networks from which you are permitted to access the Internet ...
Try changing your network settings to conform to whatever OS X Recovery needs.
Also why would my Mac be the the computer built without AHT if I bought it in early 2011?
This long thread describes what happened: Apple Hardware Test (AHT) is GONE!! after Lion install

Most of my Apple apps won't work. Suddenly on my MacbookPro running 10.9.2

Most of my Apple apps won't work. Suddenly on my MacbookPro running 10.9.2

blakefromsaint george,
if you boot your MacBook Pro into Safe mode, do your apps still not work then?

My Apple ID won't work

My Apple ID won't work using app store

mbryant1974 wrote:
My Apple ID won't work...
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

The turn-on sound won't Work, the computer opens ok silently??

The turn-on sound won't Work, the computer opens ok, but silently??

Restart in Safe Mode, it's possible a cache may have become corrupt.

Apple Remote won't work with Logic

I bought a new iMac (3.06 GHz Intel Core 2 Duo) and the Apple Remote won't work with Logic 8. It worked fine on my MacBook Pro.

jazzmaniac, I did something by holding down two buttons on the remote for a few seconds. I guess that is called registering. But when I try to play a song file in Logic, Front Row pops up instead.
I've searched the Internet and am finding little on this topic.

Hangs, slow shutdowns and restart, spinning ball opening and closing apps

I am experiencing random hang ups and slow wake up and shutdowns.
I will be typing something and nothing appears then all of a sudden the text will appear. The cursor will periodically hang up, applications take along time to open and close and I seem to get the spinning ball frequently. System preferences is slow to open. The problems seems to correct itself if I restart.
In addition, it takes forever for the DVD to recogized a CD or DVD disk and show the icon on the desk top.
I have been monitoring various posts related to this problem and there does not seem to be an answer?? Is Apple aware of these issues. I have done everything from resetting the PRAM to running disk utilities, unpluging the machine, re-installing software, etc... Nothing seems to work...I called tech support and been the Genius Bar....It seems to get worse the longer the computer is on....HELP...

dralexander wrote:
...It seems to get worse the longer the computer is on...
That seems to be a common theme -- and sounds suspiciously
like an over-temperature problem. Try smcFanControl.
http://www.macupdate.com/info.php/id/23049/smcfancontrol
Looby

IPhoto and Apple ID won't work after system update

I've recently updated my MacBook Air to OS X v10.9.4. iPhoto won't work as i am currently using v9.2. I've tried downloading a later version but have been advised that my Apple ID will not work on this computer. NB. I have an iPhone but have not used the Apple ID on this - to my knowledge, or another Apple ID on my system. I'm a basic level user so any advice on this would be great.
Many thanks,
Elza

have been advised that my Apple ID will not work on this computer
Advised how, exactly?

Installed 10.4.8 (PPC) - now my Apple DVD won't work

After installing the 10.4.8 update on my G4 laptop my Apple DVD Player app won't work, saying "A valid DVD drive could not be found [-70012]?
What happend and how do I fix it?

Repair permissions and restart. Check System Preferences->CDs & DVDs, check the settings, and try again. Move the com.apple.DVDPlayer.plist file from ~/Library/Preferences/ to the desktop and try again. Run the System Profiler app and see what it says for the device.
Is the DVD drive internal or external? What kind of Mac? Other options are to create anothe admin user account, log into it, and see if it'll work.
BTW, it's not the update. Mine works fine and has for the past six years through 10.1 through 10.4.8.

Whenever I try to open Mail 7.1(1827) preferences, Mail stops working (spinning ball of death)

I have a 27" pre 2010 iMac that has a few glitches - the most annoying is the one I described in the header. I noticed this problem just a few days ago, but I really have no idea when it started.
I have searched this forum and thought I found a possible answer.    It was to remove the file" ~Library/containers/com.apple.mail".     That sort of worked, but no. It really didn't.    Mail Preferences opened, but Mail again locked up when I tried to access the "Accounts" tab.   Option:Command:Escape ... Again!
I then restored the "old" com.apple.mail, since the "fix" really didn't help and the old file had the formatting I originally liked.     Mail works fine, but the Junk filter seems to be off.    Hence my need to access Prefs.
I have run both Disk Utility and Disk Warrior to try to repair permissions.     Both show errors but do not repair them - even when I boot from an external disk.
By the way, I have a similar problem with Adobe Reader.    Everytime I open it, within a few seconds it also locks up and I have to Option:Command:Escape.    Apple and Adobe must have dozens of error reports from me...    Thanks!

There appears to be something wrong with Mail itself.
Verify/repair the startup disk (not just permissions), as described here:
The Repair functions of Disk Utility: what's it all about?
After having fixed all filesystem issues, if any, reinstall the Combo Update for the type of computer and the version of Mac OS X you're using, unless this is the version of Mac OS X that came with your computer:
Mac OS X 10.3.9 Combo Update
You may also want to take a look at the following articles for guidelines on how to properly install system updates:
Troubleshooting installation and software updates
Installing software updates
Basically, you should verify/repair the startup disk before installing the update, no applications should be running while installing it, and you may experience unexpected results if you have third-party system software modifications (not normal applications) installed.

All Apple apps won't work/open

I was wondering if anybody has ever seen or heard of something like this…
For some reason all of my Apple applications (i.e. safari, iChat, mail, address book, calculator, ect.) don't open. But all other apps seem to work. (on firefox now)
When I open an app, it bounces once and then doesn't do anything else. With the exception of iChat which allows me to login, once I try to send a message it freezes. When I hit apple+tab to scroll through open applications it shows the icon of the problem apps and I have to force quit to close them. But like I said all other applications seem to be working fine.
Any help would be greatly appreciated.
Thanks.
Dual 1.8 GHz PowerPC G5 Mac OS X (10.3.9)

It was a font issue.

JUnit test won't work when calling embeddable EJBContainer

I'm trying to create a unit test on my application but I get an error when I call:
EJBContainer container = javax.ejb.embeddable.EJBContainer.createEJBContainer();
I've tried on multiple projects with the same result. I also downloaded the source from this tutorial: http://netbeans.org/kb/docs/javaee/javaee-entapp-junit.html and it failed. I've gone through the logs and output and nothing jumps out. The application itself will compile, deploy and work.
Anyone have any ideas?
Here is the full output:
init:
deps-module-jar:
deps-ear-jar:
deps-jar:
library-inclusion-in-archive:
library-inclusion-in-manifest:
compile:
compile-test:
Testsuite: bean.MyBeanTest
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.resource.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.transaction.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: weld-osgi-bundle.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.security.auth.message.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jsf-api.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: bean-validator.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jstl-impl.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.servlet.jsp.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jsf-impl.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jersey-core.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping entry with a Manifest file with a special attribute: javax.annotation.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.ejb.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jaxrpc-api-osgi.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping entry with a Manifest file with a special attribute: webservices-api-osgi.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.persistence.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.jms.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.servlet.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.security.jacc.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.management.j2ee.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.servlet.jsp.jstl.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.mail.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.enterprise.deploy.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jaxr-api-osgi.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping entry with a Manifest file with a special attribute: glassfish-embedded-static-shell.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding NetBeansJunitTutorial to exploded ear isEJBModule? true isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding lucene-demo-3.4.0.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant-junit4.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding jaxb-api-osgi.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding classes to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding lucene-core-3.4.0.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant-junit.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding junit-4.8.2.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding classes to exploded ear isEJBModule? true isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant-launcher.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerImpl deploy
+INFO: [EJBContainerImpl] Deploying app: /tmp/ejb-app4556776368985078980+
SLF4J: Class path contains multiple SLF4J bindings.
+SLF4J: Found binding in [jar:file:/home/alan/glassfish3/glassfish/modules/weld-osgi-bundle.jar!/org/slf4j/impl/StaticLoggerBinder.class]+
+SLF4J: Found binding in [jar:file:/home/alan/glassfish3/glassfish/modules/bean-validator.jar!/org/slf4j/impl/StaticLoggerBinder.class]+
SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.
Dec 02, 2011 6:30:23 PM org.hibernate.validator.util.Version <clinit>
INFO: Hibernate Validator 4.1.0.Final
Dec 02, 2011 6:30:23 PM org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA
INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver.
Dec 02, 2011 6:30:26 PM org.glassfish.api.ActionReport failure
+SEVERE: Exception while deploying the app [ejb-app]+
Dec 02, 2011 6:30:26 PM com.sun.enterprise.v3.server.ApplicationLifecycle deploy
+SEVERE: Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.+
+java.lang.IllegalArgumentException: Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.+
+PlainTextActionReporterFAILUREDescription: deploy AdminCommandError occurred during deployment: Exception while deploying the app [ejb-app] : Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.. Please see server.log for more details.+
+[name=ejb-app+
Tests run: 0, Failures: 0, Errors: 2, Time elapsed: 9.606 sec
------------- Standard Output ---------------
+PlainTextActionReporterFAILUREDescription: deploy AdminCommandError occurred during deployment: Exception while deploying the app [ejb-app] : Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.. Please see server.log for more details.+
+[name=ejb-app+
------------- Standard Error -----------------
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.resource.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.transaction.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: weld-osgi-bundle.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.security.auth.message.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jsf-api.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: bean-validator.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jstl-impl.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.servlet.jsp.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jsf-impl.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jersey-core.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping entry with a Manifest file with a special attribute: javax.annotation.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.ejb.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jaxrpc-api-osgi.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping entry with a Manifest file with a special attribute: webservices-api-osgi.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.persistence.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.jms.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.servlet.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.security.jacc.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.management.j2ee.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.servlet.jsp.jstl.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.mail.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: javax.enterprise.deploy.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping module: jaxr-api-osgi.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl skipJar
INFO: ... skipping entry with a Manifest file with a special attribute: glassfish-embedded-static-shell.jar
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding NetBeansJunitTutorial to exploded ear isEJBModule? true isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding lucene-demo-3.4.0.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant-junit4.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding jaxb-api-osgi.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding classes to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding lucene-core-3.4.0.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant-junit.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding junit-4.8.2.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding classes to exploded ear isEJBModule? true isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.DeploymentElement getOrCreateApplication
+INFO: [DeploymentElement] adding ant-launcher.jar to exploded ear isEJBModule? false isWebApp? false+
Dec 02, 2011 6:30:22 PM org.glassfish.ejb.embedded.EJBContainerImpl deploy
+INFO: [EJBContainerImpl] Deploying app: /tmp/ejb-app4556776368985078980+
SLF4J: Class path contains multiple SLF4J bindings.
+SLF4J: Found binding in [jar:file:/home/alan/glassfish3/glassfish/modules/weld-osgi-bundle.jar!/org/slf4j/impl/StaticLoggerBinder.class]+
+SLF4J: Found binding in [jar:file:/home/alan/glassfish3/glassfish/modules/bean-validator.jar!/org/slf4j/impl/StaticLoggerBinder.class]+
SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation.
Dec 02, 2011 6:30:23 PM org.hibernate.validator.util.Version <clinit>
INFO: Hibernate Validator 4.1.0.Final
Dec 02, 2011 6:30:23 PM org.hibernate.validator.engine.resolver.DefaultTraversableResolver detectJPA
INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver.
Dec 02, 2011 6:30:26 PM org.glassfish.api.ActionReport failure
+SEVERE: Exception while deploying the app [ejb-app]+
Dec 02, 2011 6:30:26 PM com.sun.enterprise.v3.server.ApplicationLifecycle deploy
+SEVERE: Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.+
+java.lang.IllegalArgumentException: Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.+
at com.sun.enterprise.deployment.util.EjbBundleValidator.accept(EjbBundleValidator.java:76)
at com.sun.enterprise.deployment.util.ApplicationValidator.accept(ApplicationValidator.java:128)
at com.sun.enterprise.deployment.EjbBundleDescriptor.visit(EjbBundleDescriptor.java:730)
at com.sun.enterprise.deployment.Application.visit(Application.java:1765)
at com.sun.enterprise.deployment.archivist.ApplicationArchivist.validate(ApplicationArchivist.java:816)
at com.sun.enterprise.deployment.archivist.ApplicationArchivist.openWith(ApplicationArchivist.java:277)
at com.sun.enterprise.deployment.archivist.ApplicationFactory.openWith(ApplicationFactory.java:240)
at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:171)
at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:93)
at com.sun.enterprise.v3.server.ApplicationLifecycle.loadDeployer(ApplicationLifecycle.java:828)
at com.sun.enterprise.v3.server.ApplicationLifecycle.setupContainerInfos(ApplicationLifecycle.java:770)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:368)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:382)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:355)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:370)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1064)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:96)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1244)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1232)
at com.sun.enterprise.admin.cli.embeddable.DeployerImpl.deploy(DeployerImpl.java:129)
at org.glassfish.ejb.embedded.EJBContainerImpl.deploy(EJBContainerImpl.java:142)
at org.glassfish.ejb.embedded.EJBContainerProviderImpl.createEJBContainer(EJBContainerProviderImpl.java:134)
at javax.ejb.embeddable.EJBContainer.createEJBContainer(EJBContainer.java:127)
at bean.MyBeanTest.setUpClass(MyBeanTest.java:35)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at com.sun.enterprise.deployment.util.EjbBundleValidator.accept(EjbBundleValidator.java:76)
at com.sun.enterprise.deployment.util.ApplicationValidator.accept(ApplicationValidator.java:128)
at com.sun.enterprise.deployment.EjbBundleDescriptor.visit(EjbBundleDescriptor.java:730)
at com.sun.enterprise.deployment.Application.visit(Application.java:1765)
at org.junit.runners.ParentRunner.run(ParentRunner.java:236)
at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:518)
at com.sun.enterprise.deployment.archivist.ApplicationArchivist.validate(ApplicationArchivist.java:816)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1052)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:906)
Dec 02, 2011 6:30:26 PM org.glassfish.deployment.admin.DeployCommand execute
+SEVERE: Exception while deploying the app [ejb-app] : Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
at com.sun.enterprise.deployment.archivist.ApplicationArchivist.openWith(ApplicationArchivist.java:277)
at com.sun.enterprise.deployment.archivist.ApplicationFactory.openWith(ApplicationFactory.java:240)
at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:171)
at org.glassfish.javaee.core.deployment.DolProvider.load(DolProvider.java:93)
at com.sun.enterprise.v3.server.ApplicationLifecycle.loadDeployer(ApplicationLifecycle.java:828)
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.+
Dec 02, 2011 6:30:26 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl createEJBContainer
+INFO: [EJBContainerProviderImpl] Cleaning up on failure ...+
Testcase: bean.MyBeanTest: Caused an ERROR
Failed to deploy EJB modules - see log for details
javax.ejb.EJBException: Failed to deploy EJB modules - see log for details
at org.glassfish.ejb.embedded.EJBContainerImpl.deploy(EJBContainerImpl.java:150)
at org.glassfish.ejb.embedded.EJBContainerProviderImpl.createEJBContainer(EJBContainerProviderImpl.java:134)
at javax.ejb.embeddable.EJBContainer.createEJBContainer(EJBContainer.java:127)
at bean.MyBeanTest.setUpClass(MyBeanTest.java:35)
at com.sun.enterprise.v3.server.ApplicationLifecycle.setupContainerInfos(ApplicationLifecycle.java:770)
Testcase: bean.MyBeanTest: Caused an ERROR
null
java.lang.NullPointerException
at bean.MyBeanTest.tearDownClass(MyBeanTest.java:41)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:368)
at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:240)
at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:382)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$1.execute(CommandRunnerImpl.java:355)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:370)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1064)
at com.sun.enterprise.v3.admin.CommandRunnerImpl.access$1200(CommandRunnerImpl.java:96)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1244)
at com.sun.enterprise.v3.admin.CommandRunnerImpl$ExecutionContext.execute(CommandRunnerImpl.java:1232)
at com.sun.enterprise.admin.cli.embeddable.DeployerImpl.deploy(DeployerImpl.java:129)
at org.glassfish.ejb.embedded.EJBContainerImpl.deploy(EJBContainerImpl.java:142)
at org.glassfish.ejb.embedded.EJBContainerProviderImpl.createEJBContainer(EJBContainerProviderImpl.java:134)
at javax.ejb.embeddable.EJBContainer.createEJBContainer(EJBContainer.java:127)
at bean.MyBeanTest.setUpClass(MyBeanTest.java:35)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:601)
at org.junit.runners.model.FrameworkMethod$1.runReflectiveCall(FrameworkMethod.java:44)
at org.junit.internal.runners.model.ReflectiveCallable.run(ReflectiveCallable.java:15)
at org.junit.runners.model.FrameworkMethod.invokeExplosively(FrameworkMethod.java:41)
at org.junit.internal.runners.statements.RunBefores.evaluate(RunBefores.java:27)
at org.junit.internal.runners.statements.RunAfters.evaluate(RunAfters.java:31)
at org.junit.runners.ParentRunner.run(ParentRunner.java:236)
at junit.framework.JUnit4TestAdapter.run(JUnit4TestAdapter.java:39)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:518)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:1052)
at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:906)
Dec 02, 2011 6:30:26 PM org.glassfish.deployment.admin.DeployCommand execute
+SEVERE: Exception while deploying the app [ejb-app] : Invalid ejb jar [NetBeansJunitTutorial.jar]: it contains zero ejb.+
Note:
+1. A valid ejb jar requires at least one session, entity (1.x/2.x style), or message-driven bean.+
+2. EJB3+ entity beans (@Entity) are POJOs and please package them as library jar.+
+3. If the jar file contains valid EJBs which are annotated with EJB component level annotations (@Stateless, @Stateful, @MessageDriven, @Singleton), please check server.log to see whether the annotations were processed properly.+
Dec 02, 2011 6:30:26 PM org.glassfish.ejb.embedded.EJBContainerProviderImpl createEJBContainer
+INFO: [EJBContainerProviderImpl] Cleaning up on failure ...+
at com.sun.enterprise.deployment.util.EjbBundleValidator.accept(EjbBundleValidator.java:76)
Test bean.MyBeanTest FAILED
test-report:
test:
BUILD SUCCESSFUL (total time: 12 seconds)

I am obviously talking to Apple AND I posted this letter here, because a lot users seem confused about why their computers won't sleep. Even most AppleCare reps are confused. In the past, I couldn't find much in the way of explanations pointing to this issue, so I thought I post it here in case other people are looking for an explanation.
The auto-sleep function was built before websites auto-updated and needs to be updated to accomodate them. For the average user, it doesn't make sense for the computer not to sleep just because Gmail is open. Just because some website auto-refreshes in my browser, doesn't mean I never want my computer to sleep. By the same token, if I wanted to turn off auto-sleep I could easily do so from within Energy Saver Preferences. The two should be independent, so the user has the choice.
Why should I have to close my browser every time I walk away from my computer in order for it to sleep? I've acknowledged that in certain circumstance it makes sense for the computer not to auto-sleep: watching a movie, uploading, etc, but Apple has already accounted for those instances because the computer does not auto-sleep when those programs are running. All I'm suggesting is making the auto-sleep mechanism more sophisticated so that it isn't overridden by websites auto-refreshing.
Why the negative attitude, dwb? Based on the amount of time you spend in these discussion forums, you obviously never turn your computer off, so this doesn't really affect you. Maybe it's time to step outside and get some fresh air?

The Apple trackpad won't except the "pinch open and close" command on Firefox version 4. It is configured correctly in the system preferences. HELP!

I am using the Apple trackpad with Firefox version 4. The trackpad won't "pinch open and close". It is configured correctly in the system preferences. It also worked in version 3. Anyone have any suggestions?

Do the related browser.gesture prefs on the about:config page still have a value set for those gestures?
Which Firefox function should be performed with those gestures?
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Apple Remote won't work with Non-admin account :-(

Hi all,
i have a Macbook (OS version 10.5.4). Earlier there was only one account on this laptop, and i was using it as an administrator. A few days ago i decided to convert that account to a regular (non-admin) one, and created a separate admin-only account. When i tried using my Apple Remote in the non-admin account, it wouldn't work at all ! So i tried it in the admin account, and i was able to use it and paired it with this macbook.
But on logging back into the regular account, it has stopped working again (even though System Preferences>Security says the macbook is paired with a remote). Please help!! It would be especially helpful if this could be fixed without having to create & migrate to a whole new account, etc... i'm open to command-line solutions [ that won't crash the machine ]
Thanks a million !
..meghana

Never mind. i logged out of the non-admin account and into the admin account, unpaired and re-paired the remote. Then logged back into the non-admin account, and voilà! Its magic i tell you! hope this helps any other people who have the same problem.

I changed my apple ID email address and now all my devices are signed in under the old apple ID, but it wont let me change the icould account on any without a password. The problem is my new password for the new apple ID won't work or the old? help!!!!

Help me!! I changed my email address associated with apple Id. Now ALLLLL my devices (iphone, mac, ipad) are associated with old apple Id. But It won't log out or delete the old one without having a password. Neither the old passowrd or the new password works. Now nothign works. Please help me!!

Hello Alexandra,
Thank you for the details of the issue you are experiencing with iCloud on your devices after updating your Apple ID. I recommend the following steps:
Symptoms
iOS 7 may ask for the password to your previous Apple ID when you sign out of iCloud.
Resolution
1. Use your current Apple ID password
Trying using your current Apple ID password. If that doesn't work, continue to the next step.
2. Sign out and back in to iMessage or FaceTime
If you are currently signed in to iMessage or FaceTime
If you are not signed in to iMessage or FaceTime
3. Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't work, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Tap Settings > iCloud and try to sign out.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Tap Settings > iCloud and sign in with the new Apple ID.
Find the full article here:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M.

Apple test won't work/spinning ball/opening

Similar Messages

Maybe you are looking for