Apple track pad very slow connecting after sleep

I have a late 2009 iMac (11,1) running10.10.1. It is very slow (5 to 35 seconds) connecting to my Apple trackpad whether I am logged in when I put the iMac to sleep or whether no one is logged in. I have run EtreCheck and am including the output. I would appreciate anyone offering advice on what to do to get my trackpad to connect quickly.
Thanks,
Hugh McCutchen, Jr.
Problem description:
OS X 10.10.1 takes 5 to 35 seconds to find my Apple trackpad after putting the iMac to sleep.
EtreCheck version: 2.1.1 (104)
Report generated December 6, 2014 at 2:56:37 PM PST
Hardware Information: ℹ️
iMac (27-inch, Late 2009) (Verified)
iMac - model: iMac11,1
1 2.8 GHz Intel Core i7 CPU: 4-core
12 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
BANK 0/DIMM1
4 GB DDR3 1067 MHz ok
BANK 1/DIMM1
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
ATI Radeon HD 4850 - VRAM: 512 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: one day 18:49:12
Disk Information: ℹ️
APPLE HDD HUA722010CLA330 disk0 : (1 TB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Oz (disk0s2) / : 999.35 GB (827.58 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GA11N
USB Information: ℹ️
American Power Conversion Back-UPS ES 750 FW:841.I2 .D USB FW:I2
Fujitsu Takamisawa Component Apple Optical USB Mouse
USB Keyboard + 3P HUB
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Built-in iSight
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.firmtek.driver.FT_ATA_Sil3112 (5.3.0) [Support]
[not loaded] com.firmtek.driver.Sil3112DeviceNub (5.3.0) [Support]
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriver (3.0) [Support]
[not loaded] com.ni.Fantom.nxtfwdl (1.1.1) [Support]
[not loaded] com.palm.ClassicNotSeizeDriver (3.2) [Support]
/System/Library/Extensions/KensingtonMouseDriver.kext/Contents/PlugIns
[not loaded] com.kensington.mouseworks.driver.ADBID32Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID32MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4Mouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.ADBID4MouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWBluetoothOldHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.KMWUSBHIDMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.USBMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouse (3.0) [Support]
[not loaded] com.kensington.mouseworks.driver.VirtualMouseX1 (3.0) [Support]
[not loaded] com.kensington.mouseworks.iokit.KensingtonMouseDriverX1 (3.0) [Support]
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Support]
[running] com.brother.LOGINserver.plist [Support]
[loaded] com.citrix.AuthManager_Mac.plist [Support]
[running] com.citrix.ReceiverHelper.plist [Support]
[running] com.citrix.ServiceRecords.plist [Support]
[running] com.ecamm.iglasses3agent.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[running] com.adobe.ARM.[...].plist [Support]
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.barebones.authd.plist [Support]
[loaded] com.barebones.textwrangler.plist [Support]
[running] com.bjango.istatmenusdaemon.plist [Support]
[loaded] com.google.keystone.daemon.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[invalid?] com.shirtpocket.backupbytime.plist [Support]
User Login Items: ℹ️
SMARTReporter ApplicationHidden (/Applications/SMARTReporter/SMARTReporter.app)
InstUtilLaunch Application (/Library/Printers/Brother/Utilities/InstallUtility.app/Contents/Resources/Inst UtilLaunch.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.1 [Support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 [Support]
OVSHelper: Version: 1.1 [Support]
RealPlayer Plugin: Version: Unknown [Support]
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 15.0.0.239 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
LogMeIn: Version: 1.0.298 [Support]
Flash Player: Version: 15.0.0.239 - SDK 10.6 [Support]
iPhotoPhotocast: Version: 7.0
CitrixICAClientPlugIn: Version: 11.8.0 - SDK 10.7 [Support]
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 [Support]
GarminGpsControl: Version: 2.9.2.0 Release [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
Yahoo! Installer 3: Version: 1.0.128 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
WebEx: Version: 1.0 [Support]
Safari Extensions: ℹ️
Translate
DivX Plus Web Player HTML5 <video>
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
Folding@home [Support]
Growl [Support]
Java [Support]
Kensington MouseWorks [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
Oz: Disk size: 999.35 GB Disk used: 171.76 GB
Destinations:
Data [Network]
Total size: 2.00 TB
Total number of backups: 57
Oldest backup: 2014-05-05 03:43:59 +0000
Last backup: 2014-12-06 22:48:42 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 171.76 GB X 3)
Top Processes by CPU: ℹ️
      4% WindowServer
      2% SystemUIServer
      1% iStatMenusDaemon
      0% fontd
      0% powerd
Top Processes by Memory: ℹ️
271 MB mds_stores
206 MB com.apple.WebKit.WebContent
193 MB Safari
168 MB softwareupdated
168 MB SystemUIServer
Virtual Memory Information: ℹ️
5.35 GB Free RAM
4.87 GB Active RAM
1.56 GB Inactive RAM
1.10 GB Wired RAM
46.17 GB Page-ins
66 KB Page-outs
Diagnostics Information: ℹ️
Dec 6, 2014, 09:41:20 AM NETserver_2014-12-06-094120_OZ-2.crash
Dec 4, 2014, 08:07:59 PM Self test - passed

Try the basics first:
Change your router channel number. Most times this works & is all you have to do.
Disconnect & reconnect your modem. unplug it for about 10 seconds. Plug it back in. Do the same for Apple’s routers. Wait for everything to reboot.
System Preferences>Network
Click the Assist Me button.
In the next window that pops up, click the Diagnostic button & do the necessary.
Research Knowledge Base for network problems that pertain to the OS that is currently installed on your computer. See these basic networking KB Articles: http://support.apple.com/kb/HT1401 AirPort troubleshooting guide
http://support.apple.com/kb/HT2712 Using network locations in Mac OS X
Manually provided DNS server addresses are higher priority than DHCP's
http://support.apple.com/kb/HT1714 Solutions for connecting to the Internet, setting up a small network, and troubleshooting
============================
What to do when you can't connect to the Internet
Also, run the Airport Utility app which is located inside the Utilities folder.
=====================
If using a Linksys router, contact LinkSys Customer Support and/or post in their forums.
If using Apple's Airport, please re-post over in one of the AirPort Forums.
====================
but i will then be without it for weeks which i cannot afford to miss at the minute,
If it does come down that, CALL AppleCare and request a replacement until yours is repaired.

Similar Messages

Very slow connection after phone line repair

I had my phone line repaired yesterday with new cabling and new BT box for phone and computer.My phone is fine, but the hub for my broadband does not appear to be ok. the phone symbol on the hub did not light up at all this morning, and after restarting the hub and going back to default settings it is now glowing orange only. It was ok yesterday after being fixed. Very slow connection now. Should i keep everything on to see if it will right itself, or re-start yet again?
I have been looking on BT's options for fixing but can't seem to find anything. the connections in my area are fine so it can't be an outside fault

Which home hub do you have? Did you recently re-contract or change your package, as that will affect your hub phone.
As for the speed issue, it should get better if you leave it alone.
See Why has my speed dropped
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Bridge for mac - Very slow connect after installing sd card

Hey guys,
after I installed a 32gb SD card, the connection-procedure is really slow. The green bar fills in not 10sec but in 2 minutes now. What happened? Really the SD card? What can I do?
Thanks!

Hey guys,
I had to move the XperiaTransfer-Folder to my SD-card. Now, after I moved it, the date of 70% of the photos is the current date and nearly 900 images are dated for today. It's quite hard to navigate through the images now. How does the Sony Gallery app gather information? What can I do to fix it?
Thanks

Mavericks install incomplete. No Apple installers on HD. Will I be able to upgrade to Yosemite and will it fix all that didn't install with Mavericks upgrade? Very slow connection speeds 30 hrs to download Mavericks. Tried re-install; no help/

Ever since upgrade to Mavericks I have been having problems which are too numerous to mention. I finally found a program from a UCBerkley professor called Pacifier which indicated 4000+ of 400,000+ files and folders did not install. I was unable to go further to try to fix everything because Pacifier can't find ANY Apple installers on my HD. It recommended I download the Mavericks installer without reinstalling to continue; however, after having done so (very slow connection; takes 30 hours to download) and although the installer appears in apps while downloading it disappears and NO Apple installer packages can be found on my hard drive. I tried to download Yosemite once and it indicated my system wasn't eligible for the upgrade. Its' download time was similar to Mavericks; 28+ hours.
I am using a Macbook Pro mid-2012 version OS X 10.9.5 (13F34); Processor 2.5 GHz Intel Core i5; Memory 4 GB 1600 MHz DDR3; Graphics Intel HD Graphics 4000 1024 MB.
Regardless of how many files and apps I remove my memory is being eaten up to the point I can hardly do anything at all. There are no civil words for how frustrated I am. Someone please help me.
Thanks,
JJ

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

After APTV and itunes upgrade on mac, streaming from itunes to Apple TV is very slow.

After APTV and itunes upgrade on mac to latest on 02/15, streaming from itunes to Apple TV is very slow. even 5 mins song takes 10-15 mins to start. Netflix/Youtube work fine on Apple TV. restarted Mac, router, modem, appletv. reset Appletv to factory setting and re-start.

Apple TV 2 does not appear in iTunes (exception being when connected via micro-usb for restore) as it has no sync capabilities.
See if this helps
http://support.apple.com/kb/TS2845

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Very slow connection even after upgrading firmware router WRT54G2 v1.5

Hi,
My connection is very very slow, even after upgrading firmware of a router WRT54G2 v1.5. I use a Mac, and Mac OS X 10.5.8.
I have also re-set the router and configured but it didn't work. Any other alternative to speed up my connection? Thanks!!

On the setup page,reduce the MTU to 1400,Under the Wireless tab..Wireless Network mode should be mixed...Provide a unique name in the Wireless Network Name (SSID) box.Set the Wireless channel to 11-2.462GHz...Click on Advanced Wireless Settings...Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304.
Now,reboot the router and check...

ARD 3.7.2 very slow connection on Lan

I'm running ARD 3.7.2 on MacBook Air (OSX 10.9.2) to connect mac mini (8gb / osx 10.9.2) very slow connection on LAN.
Mini connected to LAN 100Mbit Ethernet, MacBook connection is wi-fi

Ok, I solved it after doing some extensive Google searching. Still not sure why ARD went bonkers, but here's my fix.
1. Download the ARD 3.7.1 client drom the Apple downloads page and install it manually on the client machine.
2. Go back to the administrator machine and delete the computer client from the computers list.
3. From the scanners list, find the now visible client machine (it will probably say "no user name or password" next to it) and drag it to the computer list.
4. When you drag it over it will ask for the username and password. Fill in an administrator user name and password for that computer, click OK and you're done.
Still a mystery as to why ARD software itself will not create new client packages. I still haven't figured that part out. Downloading the standard client package from Apple is the only work around I know of so far. Good luck.

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?

Please, i bought a new track pad for my imac. it is working well when my imac is on. But, anytime i off my imac and wish to on it again, My track pad will be connected but it doesn't click i will need a mouse to log in my password first . Any help?
To be specific. I have the imac late 2013 model, and i just bought the trackpad this October 2014. I have been using magic mouse without any problem. I just want to have a new experience with the trackpad. Any time i on my imac, i will have a normal screen with my picture and a guest column at the center. I need to click either my picture or the guest in order to have the space where i can key in my password with the keyboard. But unfortunately, my trackpad will show that it is connected and the cursor will be moving in front of the screen if i touch the trackpad, but if i try to click, i will get no response. I have to put back batteries inside my magic mouse and then click on my picture if i want to log in with my id or i click on the guest image if i want to log in as a guest. it is only after this that my trackpad will start responding.
i want to use only trackpad for now so as to be more efficient with it. I don't want to be putting back batteries inside the magic mouse only to on my imac. I need a solution please.
Thanks.

It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space.

I am using ipod touch 4g 8 gb, with ios6 software. It is getting very very slow even after i reinstalled the software. Apps like temple run 2 and subway surfers are getting stuck and it is very very slow.My ipod has 2.6 gb free space. What is the problem. I am not getting to know. Even after i reinstalled these apps it is still getting stuck and it is very very slow. Is this what i get after paying so much money for ipod. Is this what i get very poor perfomance.

Periodically double click the home button and close all the apps in the recently used dock. Then power off and then back on the iPod. This frees up memory. The 4G only has 256 MB of memory.
Next
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

New 5k iMac track pad very sensitive can it be changed

New iMac track pad very sensitive,
Can it be changed?
I slowed the arrow speed down, that did not help.
The problem appears to be that when I scroll over a link or item it either goes to the link or opens a box to request an action be taken.
If this is normal does the magic mouse have the same sensitivity?

Look in System Preferences - Trackpad for the settings, if you find it too sensitive then you should uncheck the "Tap to Click" box.

I changed batteries in my Apple track pad and now my iMac won't recognize the UBS keyboard

I changed batteries in my Apple track pad and now my iMac won't recognize the USB keyboard

Please read and use Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

Very slow connection with Mifi 4510L??

I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
Thanks for any help you can offer,
Brian

I was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
1) "selecting WPA2 Personal/PSK (AES)"
2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
(I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked. I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR" (that's WWAN Preferred Mode LTE only for me)
4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out. I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account. Verizon very helpful on that - call us if its still an issue in a "few weeks"! However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
It runs very very warm but I suspect having it on the charger and using it almost all day is part of that. At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory. Of course then I had to wonder if maybe I was freezing it -lol. I am careful to turn it off when I am done with it and take it off the charger for the night as well.
I've been on it most of the day and it seems to be behaving well - so fingers crossed

Possible fix for OS X 10.5.7, losing connection after sleep, restart

Possible fix for OS X 10.5.7, Airport, losing connection after sleep, restart, or cold reboot.
Issue: (For OS X 10.5.7 on iMac5,1, Intel Core 2 Duo)
=============================================
- After sleep, restart, cold reboot, even though cannot connect to Internet, but the AirPort bars are still full, as if connected.
- Losing Internet connection after sleep, restart, cold reboot.
Possible Fix:
1.Open Network Preference, click on the Location drop down list > Edit Location... > click on the wheel button > Duplicate Location.
a)Select this newly setup location; Use Diagnostic button to connect to the internet. Select Network or enter WEP password if necessary.
b)Test to make sure you can connect to a web page.
c)Go to sleep & wake up.
d)This time, the Airport bar will start to show correctly. Before, it will always be full even when not connected. Now there will be no bars or grey out when not connected.
2.On the left hand side of the Network Preference Window, there is a list of services, such as Airport, build-in ethernet, built-in FireWire, bluetooth, etc.
a)Click on the wheel button on the bottom of the service list; select Set Service Order...; move Airport to the top of the list.
b)Delete any services which you are sure that you are not going to use, such as Bluetooth, etc.
3.Pick one of the locations mentioned in #1, and make it sure it is connected. If not, use Diagnostic button. If you have to select Network or enter WEP password to connect, make it so.
a)Check to make sure you can connect to a web page.
4.Go to sleep & wake up. The Airport bar should be filled up quickly. Try to connect to a web page.
5.Restart computer. Test a web page.
6.Shut down & Start computer. Test a web page.
7.When everything is working fine, you can delete the extra location that you created in step #1.
8.Click the lock on the left lower corner of the Network Preference window to safeguard the setting.

If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
(Removed link because of the way Flash drives the Canon site).
It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
Chris
I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
Message was edited by: 2point5

Apple track pad very slow connecting after sleep

Similar Messages

Maybe you are looking for