Apple tv 1 shows black and white picture???

i got my atv1 4 yrs back.was using it with my old tv with the 3 component cables,and i used to get only black and white pictures.
but after using it for such long time,i finally got a new led-hdtv.but to my surprise still the apple tv shows only black and white.i am not the getting what the problem is and how to fix it to make it color???

Welcome to the Apple community.
The fact that you are receiving a black and white picture suggests that you are using only one of the elements of the component cabling. Can you tell me more about how you have connected the Apple TV to your new TV please.

Similar Messages

  • I own a iphone 5 the camera in photo mode showing black and white and pictures

    My iphone 5 camera in photo mode showing black and white and pictures are captured in black and white only.how to make it in colour mode

    Do you have a filter turned on?

  • Drop iphone 4 on floor showing black and white lines

    drop on floor show black and white line

    And what troubleshooting steps have you tried so far?
    Basic Troubleshooting Steps when all else fails
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6 older, hold down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
    - Test the issue after each step.  If the last one does not resolve the issue, it is likely a hardware problem.

  • Canopus ADVC110 is giving me Black and White picture which is misaligned

    Very new to Analogue to Digital converting so please forgive ignorance!
    I am in the UK. I have Canopus ADVC110 is giving me black and white pictures which is misaligned and shows specked picture noise. I see bottom on one frame and top of another with a black line ("frame" rebate?) running through the middle of the monitor screen in iMovie.
    I have leads from my camera plugged into the front of box and firewire out of the back into MacBook Pro running iMovieHD v6.0.3.
    I have set the dip switches to both PAL and NTSC just in case I got the output from my camera wrong (even tho' says Pal on it).
    In iMovie I choose DV as video format and it picks 29.97 fps automatically. iMovie shows me the capture is NTSC from the Canopus box.
    The Canopus website has poor support so I am at Discussions mercy!

    As you're in the UK, you MUST use the 'PAL' setting, and choose a new Project in iMovie to be 'PAL' ..that's 25 frames per second.
    If you do that, your import will be OK, instead of of shifted and black-&-white.
    Work with Pal throughout (25fps) and you'll be OK. Set iMovie's Preferences to PAL 25fps, then Quit iMovie and restart it, to force all future Projects to be PAL 25 fps.
    Do the same, too, for iDVD if you're going to use that to burn DVDs after you've edited your movies.

  • Why does a black and white picture come out with a tint?  iPhoto, Canon

    When I print a black and white picture from iPhoto, it comes out with a tint.  How do I prevent that? iPhoto, Canon MX310

    Hey neil293,
    Thanks for the question. If I understand correctly, when you print a photo in iPhoto it has a tint. I would recommend that you read this article, this article explains how to adjust the tint in a photo. 
    iPhoto '11: Adjust exposure, contrast, colors, and other qualities
    Thanks for using Apple Support Communities.
    Have a good one,
    Mario

  • Dvr620ku only shows black and white using HDMI cable

    I connected the av cables and they showed black and white, now im connected through hdmi and same problem watching vcr tapes... what can I do besides trying a component cable?

    I would recommend trying composite (not component) video. There is one jack, color coded yellow, at the bottom right when looking at the back of the unit. Run that into your TV. Your TV likely has a combination component/composite video input. If so, you'd connect the output from the DVR620 into the Y input on the TV and connect nothing into Pb and Pr. If you're uncertain, post back with the model number of your TV so I can check its manual online. I'm not sure why HDMI would give you black and white unless the tracking and picture quality is poor with the VHS tape. I have tested this scenario multiple times with my DVR620 and always get color. Presumably you get color when playing back DVDs? If you have L1 or L2 connected to a cable box, I recommend you record a brief segment off of a TV channel onto VHS, and then test playing that back to see if that is in color or black and white.

  • Black and white picture

    hi
    How do I put colour in a black and white picture?

    Which Adobe software are service are you trying to utilize to accomplish this task?

  • Hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

    hi! i took black and white pictures in RAW, but in Lightroom i see these only in color. what to do? thank you

    You may want to read this I imported a mix of color and black and white raw files but lightroom changed all the black and white file to color?
    The Black and white you see is just the cameras representation of the "raw" pixel information straight from the sensor. The RAW file format has yet to undergo demosaicing, and so it contains just one red, green, or blue value at each pixel location.
    Lightroom, or any other RAW processor, doesn't recognize the in-camera processing because it is unique to the camera.

  • My black and white pictures show up colored

    My photos aren't the same as the filter I used in the camera when I was taking the picture, for example my black and white photos show up colored.

    Have you checked your ink levels and the inkjet jets for plugging?
    OT

  • Macbook display shows black and white lines when fullscreen

    If i leave my Macbook on for a while without shutting down and then I view a photo or movie (in player or safari) fullscreen the screen shows just black and white lines. Sort of like bad tv reception. It has happened a few times and a reboot has fixed it but it comes back. Any ideas anyone?
    Thanks

    I have a similar problem. Not sure you're on here (since the post is really old) but did you manage to work it out? How?
    My thread:
    https://discussions.apple.com/message/19007548#19007548
    My Imac froze earlier today as I was dragging an image from safari into indesig and when it froze the weirdest pattern overlaid the screen. It looked just like the opacity pattern from photoshop with grey and white squares. I turned the computer off using the power button and unplugged everything.
    Now when I try to start it these weird lines appear on my start up screen (see link)...
    http://meijerladdaruppgrejer.wordpress.com/2012/07/24/oops/
    as you can see the apple and the wheel appears as normal...
    ... then it moves to a normal looking white screen (perhaps a bit greener than usual) and around 30 seconds later freezes at the blue screen.
    I've tried the cmd + alt + p + r several times but it won't help.
    If i press alt during start up I can see and choose my hard drive but just end up at the blue screen again.
    Can I try starting it up in safe mode or something?

  • Apple tv in only black and white

    I just got an Apple TV, and I can't get it to show color; it is only in black and white. I have tried putting the red yellow and white cables in everywhere that they would really connect..anyone else have and fix this problem by any chance?

    yes but
    component cables are normaly 1 cable with 3 connectors in each end
    rather then 3 cables
    hdmi is 1 cable with everything
    it all comes down to what your tv support
    if it dont have component or hdmi you will never
    get it in colour unless you buy a converter
    hdmi is the best image quality

  • Black and white pictures and raw format

    I started to use raw format. however, when i shoot pictures in black and white and download them to bridge, they get converted to color pioctures. Does anybody know why and what to do about this?

    In addition to this,
    Raw is Raw, meaning it captures all the data your sensor was capable of. It creates also a jpeg preview extracted in camera from this Raw file to show at your camera viewer and as thumbnails on your computer.
    You need a Raw converter to translate the Raw data to a picture in RGB (demosaicing they call this process).
    And every setting you choose in camera for shooting is just added as metadata like all Raw settings in the Raw converter are added as metadata to reflect the changes you have made. If you want you can delete those data and start all over again with the original file because this stays as it was taken when shot, regardless all earlier applied settings.
    Bridge uses Adobe Camera Raw for converting (demosaicing) the files and has it own code like others have their way of converting. It is possible that the vendor software delivered with your camera is capable of showing the in camera settings right away but then like Curt already stated it is just a reflection of your settings, the original is still the color image you have shot.
    There are lots of ways (and far better then in camera setting) to convert your color image to black and white. Just start a google search for some video tutorials and choose the one you like best for your workflow.

  • Everything in apple box is in black and white only?

    Apple tv only displaying in black and white, have reset, still in black and white?

    What TV is it connected to?  Apple TV requires a full HDTV.

  • Can I restore a wrinkled black and white picture

    How Can I restore a wrinkled black and white picture

    I doubt that anyone can provide this information to you without seeing the picture. You can post the picture here on the forum page via the camera icon at the top of the reply box. However, you can not do in an e-mail reply.

  • Colored objects in black and white pictures?

    How can i take a white and green dress to have just the green pop out but yet have the reamining picture be in black and white? Thanks

    Just desaturating can produce a rather flat image, though, and this method may give you a very peculiar shade of green, not the one you wanted.
    If the photo is in color, it's better and easier to just get out the selection brush (the one with the gears on it), select a B&W conversion style in the options bar, turn on the inverse checkbox and drag across the dress (assuming it's already the color you want). The rest of the photo will turn black and white, leaving the dress in color.

Maybe you are looking for