Apple TV 2 doesn't show fotos in widescreenmode via airplay

The Apple commercial website shows an example for fotoviewing on a widescreen TV (Woman in front of a green door with white doorframe in a yellow house)
To show a pic in fullscreenmode is not possible!!!!!
When you show pics from your iPhone 4S via AirPlay there are allways black beams right an left!!
An update with possibility to select widescreenmode is neccessary!!!

Sorry, actually many photos are 4:3, the reason you can't simply zoom them to fill the TV screen is that in many cases this would result in the heads being cut off people on the photo. Zooming a panoramic movie on a TV screen is somewhat different, most cameramen avoid having action near the edges of the screen and generally zooming doesn't lose much if any of the action.
The IPad has a 4:3 screen so no photo zooming is necessary.

Similar Messages

  • My iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, so it means theres something wrong in my iphone.

    my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me

    Hi jaredfox06,
    If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay.  To troubleshoot this issue please follow the steps outlined below.
    Try these steps first
    Make sure that you have the latest software on your iOS device and Apple TV.
    Make sure that both devices have Wi-Fi turned on.
    On your iOS device, go to Settings > Wi-Fi.
    On your Apple TV, go to Settings > General > Network.
    If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
    On your iOS device, go to Settings > Bluetooth.
    On your Apple TV, go to Settings > General > Bluetooth.
         If you don't see AirPlay in Control Center
    When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
    If you don't, try these steps:
    Restart your iOS device and Apple TV.
    Connect both devices to the same Wi-Fi network.
    On your iOS device, go to Settings > Wi-Fi.
    On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
    On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
    Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
    Have a good one,
    Alex H.

  • Some times the apple tv icon doesn't show on my ipad.   What can I do!?

    When using apple tv from iPad (1) sometimes the icon doesn't show up on screen?

    Welcome to the Apple Community.
    Sorry but which icon is it that sometimes doesn't show up.

  • Apple mail search doesn't show messages

    I can normally search for sent and received emails by entering a persons email address in the search field with the spyglass icon, since last week I haven't been able to do this even though all messages show up in the inbox and sent folders. Is there a setting that I might have accidentally changed?

    Step 1
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Triple-click anywhere in the line below on this page to select it:
    syslog -F '$Time $Message' -k Sender mdworker -o -k Message Rne Norm -k Sender mds | tail | pbcopy
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign ($) to appear.
    The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. 
    The Terminal window doesn't show the output. Please don't copy anything from there.
    If any personal information appears in the output, anonymize before posting, but don’t remove the context.
    Step 2
    Enter the following command as in Step 1 and post the output:
    mdutil -as 2>&- | pbcopy
    You can then quit Terminal.
    Step 3
    Launch the Console application in the same way you launched Terminal. In the Console window, look under the heading DIAGNOSTIC AND USAGE INFORMATION on the left for crash reports related to Spotlight. If you don't see that heading, select
              View ▹ Show Log List
    from the menu bar. A Spotlight crash report has a name beginning in "mds" or "mdworker" and ending in ".crash". Select the most recent such report, if any, from the System and User subcategories and post the entire contents—the text, please, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post any other kind of diagnostic report, such as hang logs—they're very long and not helpful.

  • How can I show photos from aperture via airplay?

    We try to show the photos via airplay to apple TV. now does that work?

    Hi Bob,
    I am trying to do it like the instructions by using iTunes to show photos from my Aperture library.  When I select this in iTunes no photos are linked and thus I cannot show them using my Apple TV.  Are you streaming directly to your Apple TV from the Aperture application?

  • Apple Users Data Doesn't Show in PDF Form

    Hello,
    We created a form using Acrobat 9.  The form can be filled in and saved so people can email it back to us.
    Whenever I receive a form from somebody that is using an Apple, the characters they have typed, don't show up in the boxes unless you click the box where the data should be.  It won't print the data either.
    For example, let's say I have part of the form where people type a paragraph.  When they email the form over, it's blank....unless I click the box the data in is, they it shows up.  This only happens with Apples users.
    Do you have any thoughts on why this is and how to correct it?
    Thanks!
    Dave

    Hello George,
    Thanks for the feedback.  Forgive my naivety but if Apple users are using a 'preview' mode, are they still able to type and save the data then?  I am getting these PDF's back with the data in the fields, but I have to click the box to view it.
    Currently, I am doing what you describe in that I have to open a blank document, and copy/paste the info over.
    Is there a 'Apple' version I can create for Mac users?  It's strange to think that Mac users can't use the same form....
    Thanks for you input!
    Dave

  • How to install (not update) the HP LaserJet 1020/1022 on Mountain Lion? The Apple Software Update doesn't show nothing.

    Hi guys,
    I'm trying to install my HP LaserJet 1020 on my new Mountain Lion anyway I'm not able to find any driver! The HP says that I can update or install this printer using the Apple Software Update anyway I don't see any update or installation on it.
    Does someone know a way to download a driver or find a solution for this problem? With previous version of the OS It was possible to download a .dmg for the HP LaserJet 1022 (the driver was the same for both versions, 1020 and 1022). I tried to download and install the driver for Snow Leopard anyway I don't see any entry when I try to select a driver for my printer during the installation phase (the list contain only two very generic drivers for HP printers).
    Thanks for your time!

    The HP says that I can update or install this printer using theApple Software Update anyway I don't see any update or installation on it.
    Updates are only available if the software has already been installed.
    HP is responsible for updating their drivers for Mountain Lion compatibility. Not Apple.
    Doubtful the driver for Snow Leopard will run on Mountain Lion.

  • I have an iPhone 5s and if I want buy something from Appstore, Apple ID place doesn't show to me, what should i do?

    I'd like to buy something from Appstore. I click for example "Free" and I'm waiting for window with Apple ID or something but nothing happens. What should I do with that?

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    NOTE:
    You cannot use other countries itunes stores.
    You must be within the Country with a Valid Billing Address and Credit Card for that Country to use the iTunes Store of that Country..
    iTunes Store Terms of Service
    http://www.apple.com/legal/itunes/us/terms.html#SERVICE

  • Multicast WDS Imaging Not Working - Doesn't show up when booted via PXE..?

    I have a lab environment setup specifically for imaging laptops via WDS.   I have a stand alone Windows 2012 server connected directly to an 8-Port Cisco SG-220 8 Port switch.    Nothing else is connected to this server and it is not being
    used for anything else.  The server is running DHCP and WDS.    I can boot laptops via PXE and connect to the WDS server to deploy the images through standard WDS imaging.  However, I have not been able to get Multicasting to work.  I
    have never used Multicasting before and have read through the documentation but must be missing something.  This is what I've done:
    1. In the WDS server I right click on my deployment image and select 'create multicast image' then go through the prompts to create an auto-cast image.  
    2. The Multicast image is created and shown as 'waiting' on the WDS server.
    3. The Cisco router is brand new out of the box, the only configuration I did was to enable IGMP snooping.  I did not make any other changes to the setup of the switch.
    4. I boot a target machine via PXE using the same Boot Image that I always use.  It loads to the screen where I can select the image I want to deploy but it never shows the multicast image as an option.  I only see the regular image I had previously
    been using.
    I'm not sure what else I'm missing in order to get the target machine to connect and image using the multicast image.  
    Here are a few screen shots of what I have setup:
    Here is the multicast image created on the server
    Here is the Cisco Router configuration:
    Here is the NIC card configuration on the server:
    This is the target laptop booted via PXE but it never shows the multicast image as an option.
    />

    Hi AdamNYC31,
    The multicast feature used by WDS uses Internet Group Management Protocol (IGMP) version 3. Your network switches will need to support this, and you’ll need to configure them
    for multicast. Please refer the following similar thread check each step Aaron Tyler and Ron St and Ankit Oberoi offered solution.
    Multicast issue: Always "Waiting"
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/18122b39-e707-455d-b22f-956ebfb95e40/multicast-issue-always-waiting?forum=winserversetup
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Outlook email doesn't show reply/forward info via ActiveSync

    I recently set up my iPhone 3G to sync with our Exchange server at work. When I reply or forward a message from the phone, it only shows it as read within Outlook instead of the reply/forward information as with my old WM6 device. Does anyone know if there is a setting to change this or is this another iPhone/ActiveSync bug?

    This seems to still be a problem with the iPhone 3G running firmware 2.0.2 (5C1). I am using Exchange ActiveSync (syncing via 3G). When I reply to a message on the iPhone, if I look back at Outlook, I cannot tell that I already responded (forward or reply), something that has long been supported by Windows Mobile devices (and allows me to thread messages together in Outlook for historical purposes).

  • When I on my Apple TV on my tv it doesn't show anything it just show check your cable connection

    When I on my Apple TV it doesn't show anything please can you help me

    is this a msg from the tv or from the appletv ?

  • I have a Sharp Aquos lc-40e67un that and new Apple TV. It doesn't show an input plugged into any HDMI port I try to use.

    I have a Sharp Aquos lc-40e67 television that is 5-6 years oldthat and a brand new Apple TV that doesn't show up as an input in any HDMI plug I hook it to. Is my television too old to use the Apple TV technology?

    I checked all power connections first, then tried every available HDMI port on the tv. There was nothing showing on the input page that indicated anything new was available.
    I'm not sure how to update firmware, inasmuch as I can't get the device onscreen to see any options.
    I tried everything I could think of, including scouring the net for information before I posted my question here for help. Perhaps my 6 year old Sharp just predates any ability to use such hardware.

  • Movie I Purchased Doesn't Show Up as Purchased

    I have a Movie* in my library that I purchased as a DVD/digital copy combo. In iTunes on my computer, the "Get Info" shows it as "Purchased by:" me with the correct Account Name, so it ought to be something I've "purchased" as far as iTunes is concerned, right?
    But when I go to iTunes from my iPad or Apple TV, it doesn't show up and I can't download it over the air on the iPad and I can't watch it on my Apple TV.
    Is there anything I can do to fix this situation?
    * Thor

    Hello,
    Did you solve this as I have the same problem with 3 films I purchased and would appreciate any help.

  • App store doesn't show Mac OS X Lion 10.7.3 as purchased and will resell it to me has anyone else noticed this?

    The Apple app store doesn't show Mac OS X Lion 10.7.3 as purchased and will resell it to me. I bought this computer (early 2011 macbook pro 17 in) new in oct 2011 it came with Lion installed has anyone else noticed this?

    Barney,I did as you suggested and emailed app store support qutioning why the app store didn't recognize my OS LION software as purchased even though all of the iLife apps that came bundled with it are recognized as PURCHASED and here was the email response from robert@ the app store....< I understand that you are trying to re-install the OS X Lion as you had a Hard Drive crash but it is not showing as purchased from your Mac App Store purchase pane.
    As the Mac OS X Lion was pre-installed to your computer , it will not be recognized as purchased in the Mac App Store, and because of that it is not available fro re-download for free. Also, computers that come preinstalled with Lion do not ship with the disk.
    Dana, not worry as OS X Lion has a self recovery feature.
    This article will guide you on how to re-install OS X by Lion Recovery :
    OS X Lion: About Lion Recovery
    http://support.apple.com/kb/HT4718
    This article may also help you on the recovery process:
    OS X Lion: About Lion Recovery Disk Assistant
    http://support.apple.com/kb/HT4848

  • Replaced my internal hard drive but it doesn't show in finder

    my internal drive on my imac was recently replaced by apple but it doesn't show up in finder.  How do I correct this?

    Finder -> Preferences -> Sidebar
    Check the options under Devices as appropriate for what you wish to see.
    Regards.

Maybe you are looking for