Apple tv 2 dont work with thomson tv after update??

After an update my apple tv don work with my Thomson tv anymore, when i choose the HDMI on my tv, the led light goes out on the Apple tv , and the tv say no signal , i have 2 thomson tv and both are doing the same thing, om my philips tv the apple tv works???!!!
Patrik

I assume it's a straight HDMI connection. Have you tried connecting to iTunes (via micro usb) and doing a restore? If that doesn't work it may be hardware related, in which case you should take the unit in.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

Similar Messages

  • HT202157 My apple TV is not working with light flashing after up date

    My apple TV is not working with the light flashing after an up date, what can be done?

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • E51 don't work with SU-8W after update

    Hello
    I updated my N51 to 200.34.36
    Since then the Nokia Wireless Keyboard SU-8W isn't work with the N51. I can connect with Bluetooth and can see the Keyboard on my E51. I can push every key on the keyboard but don't happen on the E51.
    With my N73 the keyboard works fine.
    Do you have a good idea?
    Thank you.

    I just bought this wireless keyboard. I upgraded earlier to the newest E51 firmware. The E51 does conect to the phone but that's it. It doesn't work. I'm not amused about this and I'll send the product back.

  • Import via Drag & Drop not working with LR CC (after Update from 5.7)

    I always imported my pictures by just dragging them in the Windows Explorer and dropping them to the Lightroom Gallery tab.
    This does not work with LR CC anymore.
    The longer way via "Import" works fine.
    Any suggestions?

    With Gallery i meant Library, my mistake (wrong translation, i am using the german version).
    What works with your setup doesn't work with mine.
    I attached a screenshot:
    As you can see (cursor) i can't import the file from the file explorer on the right.
    (The file is not already in the catalogue and i am in the library tab grid view mode).
    Using Windows 7 x64 prof Service Pack 1

  • ATV stopped working with my Sanyo after update

    I just updated my AppleTV. It is no longer showing picture to my Sanyo Z2 video projector. No matter what I try, the picture is not appearing. ATV sounds are normal. Have there been and update to e.g HDCP driver in ATV or something... which would cause Sanyo not show the video???

    Its connected to a splitter which routes to and hd tv and and hd projector. I thought that this could be the problem and It may be that it IS causing this issue. BUT it worked ok last week, rented 3 hd movies with no errors at all, my 1st rental since the patch last night and I couldnt do it. Almost ruined my saturday night, thank god for blu ray (which, incidentally I BOUGHT for £5 more than an apple rental...couldnt resist that dig about prices, sorry apple). I know the patch was supposed to address the download issue but as there are now new HDMI options in the menu they have done something hdmi related. At the end of the day my options seem to be buy a 10m component cable and watch 1080i on my projector ONLY or rule out apple tv for movie watching. The second option is going to be a **** of a lot cheaper. Real shame as Ive loved my ATV until yesterday

  • Airprint not working with HP printer after updating to IOS5

    Hi,
    I have an HP airprint printer (photosmart B210) that worked fine with my ipad2 and iphone 4 all running ios 4.
    Now I have a iphone 4s as well as the iphone 4 and ipad. After upgrading to ios 5, I can no longer airprint from any of my ios devices.
    I have tried turing everything off anf back on (including time capsule router, printer, ios devices).
    I can see the printer from ios but the job just sits waiting to print. I have managed to print one document after trying multiple times.
    Anyone having this issue?
    Thanks

    BattleAngelita,
    Welcome to the HP Forum.
    The fact that the SimplePass program is asking your for your Master Windows Password means the program survived the upgrade process to Windows 8.1 -- sort of.
    You may want to start with the following:
    Create a Restore Point >>  Create a Restore Point – Win7  OR  Create a restore point Win8
    Close all your programs and Shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook
    Boot the computer and log in
    Check to see is SimplePass has sorted itself.
    ==================================================​========================
    You may want to try to Update your SimplePass program to the latest version in the version 6.x series.
    Before you do that, read and follow the instructions to Export your Webcards to your .tsd file.  Regardless of whether the website logins are working right now; you do need this backup in case you lose your HP SimplePass program (through complete removal / reinstallation or though corruption).
    Next, consider updating the HP SimplePass program to the latest of the version 6 series.  If you are already running the latest version, consider the other options in the guide, including the "Repair SimplePass" procedure.
    Open the file > Click on Download > Click “Open in Adobe Reader”
    Simple Instructions to Upgrade HP SimplePass
    Click the Kudos Thumbs-Up!
    It is a nice way to say “Thank You" for the help.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Logic Pro no longer works with Firewire 1814 after updating drivers

    I was attempting to hook up 2 M-Audio Firewire 1814 units and use them from Logic Pro 7. The older driver I was using would actually crash with this configuration, and so I updated to the latest driver, thinking this might solve the problem.
    Well, the M-Audio driver now comes up fine - I can even monitor the signal levels coming from both devices in the associated UI. However, when I launch Logic Pro, I get the following message:
    "Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers."
    Although I can arm some of the lower track numbers (I still get this message), I cannot do so with higher track numbers.
    Effectively, installing the latest M-Audio driver has broken my version of Logic Pro for whatever reason.
    Removing and reinstalling the driver made no difference.
    Any thoughts, anyone??
    -- Brian
    PowerMac Dual 2.5 GHz   Mac OS X (10.4.8)  

    The M-Audio driver does not support 2 devices in Logic Pro.

  • Flash not working with any browser after update

    After an update, flash videos will not stream in any browser (Chrome, Firefox, Safari). I did a clean install of flash and the browsers, but to no avail. Mac 10.10.2. Has anyone else experienced this?

    Sadly doing that did not fix my problem either.     I just tried doing that and uninstalling flash player, rebooting and then reinstalling flash and I am still having the same problem as I stated here.   http://forums.adobe.com/message/4014843#4014843
    I have checked that flash is enabled
    Unchecked hardware accerleration
    Set in the internet options to use software rendering
    Tried updating my drivers (it tells me my drivers are up to date, in any case I have only had this laptop since July)
    I even tried deleting cookies, though I use IE9 instead of firefox so I just deleted them all instead of just the one for youtube, I honestly can not find the folder for cookies anyway with this windows 7 and how it is set up to try and delete the one cookie.
    I am really at a loss as to what to do.

  • Spell checking dont working with "Automatic by language" option

    Russian spell checking dont working with "Automatic by language" option in Sys. prefs.

    Let Apple know at
    http://www.apple.com/feedback

  • APPLE TV DOES NOT WORK WITH NETFLIX

    APPLE TV DOES NOT WORK WITH NETFLIX, just a black screen and "Netflix is loading" message appears. I can´t even see Netflix´s home page or set up my account. Netflix is working fine on all other devices at home, but in Apple TV.
    I have tried the 8.8.8.8 DNS trick, the turn off procedure, the manual IP setting, but nothing....black screen still appears

    It started working.....!!!!!  (It seems someone back there is listening)
    I "forced" an upgrade, I mean it showed "AppleTV is updated", nevertheless I re-started the system using the "return to original configurations" option. Then it updated again by itself to a newer version....and started working perfectly.
    I have paired my apple wireless keyboard and it works fine, this way is easier to set up passwords or so (you can also do it with your remote).
    TIPS:
    I didn´t change any language or video quality configuration (scared to do so)
    I changed to ethernet (cable) instead of wireless
    My internet plan is 6 Megabytes (it was the same while it wasn't working)
    good luck!!

  • Apple Tv does not work with youtube and movies on iphone or ipad

    I am on my 2nd generation apple TV. Always worked with Youtube, my iphones and ipads and Netflix.
    I think it started about a month ago.  I can only use Netflix.
    If I try YouTube and select a video (even if small) it just keep spinning and never starts.
    The same thing happens with my video from iphone 5S, 5, and ipad 2.
    Than I went to my sons house with a Apple TV 3rd generation and different wifi,
    same thing happens, I can not show a video from my iPhone 5S.
    What is going on, did Apple TV change something?
    Is this a update that went wrong?
    (I have auto update and also checked manually to make sure have latest apple TV FW)
    (All iphone and ipads are latest FW).

    Hi pcorsaro,
    You may need to restore your Apple TV and see if the issue is resolved after that process:
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/kb/ht4367
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • My Apple TV is not working with my Macbook pro 13 inch mountain lion after Apple TV upgrade?

    My Apple TV is not working with my Macbook pro 13 inch mountain lion OS X 10.8.2 after Apple TV upgrade?
    I am getting an error message as soon as I try to connect my Apple TV
    An error occurred (-6722) while connecting to the AirPlay device “Apple TV”
    it was working fine however after the upgrde it is giving me the above error message

    same here macbok air 2012 appletv 3 bugs the **** out of me
    it just stops randomly after a "while"

  • My apple ID is not working with my apple store

    My apple ID is not working with my apple store

    I have the exact same problem as "Jan Olsen 1"
    I sent them feedback:
    "I was given a $25 iTunes gift card. 
    When trying to log on to my account, my password didn't work (though I entered the correct password THREE TIMES). 
    I requested help changing the password through an e-mail. Went through the process, changed the password.
    I successfully logged on to my account and entered the gift card information and was given a $25 credit.
    When I tried to buy mp3s, I was asked to enter my password - AGAIN. 
    I got one of the following messages each time I tried to enter my NEW password:
    'We could not complete your iTunes Store request. An unknown error occurred (5002).
    There was an error in the iTunes Store. Please try again later.'
    or
    'Verification is required.
    You must enter your AppleID and password, click Billing Info, and verify your payment information in order to make purchases.
    The Apple ID you entered couldn't be found or your password was incorrect. Please try again.'
    Don't know where to go from here."
    And then, just to log on to this forum, I had to enter my AppleID TWICE! Once, then again to verify my AppleID!
    Ridiculous! Frustrating!

  • HT5706 I am trying to set up Apple TV with my Uverse WiFi, but I get errors when entering my password.  One site said that Apple TV doesn't work with WPA which Uverse uses.  Is there anyway around this or will Uverse and Apple TV just not work together.

    Trying to set up Apple TV with ATT Uverse.  I get errors when trying to enter my WiFi password.  One site says that Apple TV doesn't work with Uverse because it uses WPA for encryption.  If true, does that mean Uverse subscribers cannot use Apple TV?

    Spurs63 wrote:
    does that mean Uverse subscribers cannot use Apple TV?
    No, that's a rather silly conclusion.
    There are two options:
    stop using the crappy router provided by the ISP.
    Physically connect the ATV to the router via Ethernet.

  • My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

    My Apple TV controller stopped working with my tv box. I changed battery. But the remote controller works in the store and it controles my iMac . What is the problem?

    Hi Ron.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

Maybe you are looking for