Apple Tv 2 has a white blinking light with the output of just the apple logo. How do I fix this?

Apple Tv 2 has a white blinking light with the output of just the apple logo. How do I fix this?
I do not know how this happened but it won't get out of the start up screen.

The 4.4 update bricked mine too. I did the restore using the USB cable on iTunes successfully but the unit still hangs on the Apple logo screen.

Similar Messages

HT200197 My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person. :)

My Apple TV just has a white blinking light. Will not turn off. The TV shows nothing but the Apple logo. It worked fine yesterday. PS - I am not an IT person.

pull the plug for 30sec and try reconnecting power
if that don't help
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Im trying to install itunes but it keeps telling me "service 'apple mobile device' failded to start verify that you have sufficient privileges to start system services" how do i fix this?

im trying to install itunes but it keeps telling me "service 'apple mobile device' failded to start verify that you have sufficient privileges to start system services" how do i fix this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

My iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

my iphone 4 has lost its software. itunes keeps saying it wont detect my iphone 4 and the iphone keeps saying connect to itunes. how do i fix this?

Place the device in DFU mode and restore.

When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?, When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

When I try sharing to my apple devices from my final cut pro x, I keep getting a "Quicktime Error:-50". How can I fix this?

You can search the entire internet by putting that error message into google, see what other discussions appear.
With only the little information you've provided, I'd trash Compressor and download it again from the App Store.
You could share the timeline out to MPEG2 and then import that into iDVD, if you have it, or Toast.
Given an hour or three, someone with better suggestions will soon chime in.

Ok I forgot my Apple ID questions I went to try to change them but my rescue email is wrong how can I fix this

Ok I forgot my Apple ID questions I went to try to change them but my rescue email is wrong how can I fix this???

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(107400)

I recently restarted my iphone and now all that appears is the apple logo how do i fix this problem

i recently restarted my iphone and now all that appears is the apple logo how do i fix this problem?????

Plug it into your computer and restore it.

My touch screen on my ipod Nano, Generation 6 has gone completely white. I can still play music if I "accidently" touch the right icon. Does anyone know how I can fix this. Also I have 2 other ipods that i can't sync anymore, it says they are not compatib

My touch screen on my ipod Nano, Gen 6 has gone completely white. It had started going white the day before. I tried resetting it but to no avail. Does anyone know how I could fix this. Also I have 2 other ipods that I am no longer able to sync. It comes up with a message (best I can remember) something to the effect that my itunes version is not compatible with my ipod. Please help. I'm tired of buying new ipods when the new hasn't even worn off of them!!!
Thanks

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My apple ipod 32mb has turned all the icons upside down and backward. How can I fix this.

Apple iPod Touch 32mb has turned all icons upside down and backward. How do I fix this.

I really do not understand. Try the basics:
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My MacBook Air won't start it's grey with apple logo Howe do I fix this?

I have 2008 MacBook Air today I can't start up. When I press the power button it shows gray screen with apple logo and that thing spinning . How do I fix this?

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

When I turned on my ipad the screen is scrolling grey and white veritcal lines. I can't power it off. How can I fix this?

When I turned on my ipad the screen is scrolling grey and white veritcal lines. I turned on the ipad and plugged it up, when I touched the button on the bottom, it flashed as if the screen was coming up, but instead it scrolled grey and white lines, halfway across the screen and has been doing so for about an hour now. How can I fix this? I need it for school. Am I going to have to send it back? And if so, will they send me a replacement while I am waiting for mines to be fixed?

Janellie_love-
You might connect the iPad to its wall charger for half an hour, to be sure there is enough juice to get started.
That sounds like an internal problem, as you suspect. If you can show it to an Apple Store Genius, you may get a replacement on the spot.
If there is no Apple Store near you, look for an Apple Authorized Repair Center. There may be one in your city. I do not know how long it would take, or if a "loaner" would be available. Whether they can fix it on site would depend on what the problem is. <Apple Authorized Repair Centers>
One thing you can try is to reset (reboot) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. If it works, the iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes clears up mysterious problems.
Fred

My iphone 3g stuck in apple logo how can i fix this ?

in the middle of jailbreak my iphone 3g is stuck in apple logo then i turn off my iphone and its not fixed please help how can i fix this problem and it is not connect in computer and itune ?

We are not allowed to address jailbroken iPhones on this forum. It would violate the terms of service.

I tried to soft reset my ipod touch with the top button and the screen button. it turned off and went to the blue screen with the apple. now it won't do anything-it has stayed on that scren for 4 hours now. does anyone know how i can fix this?

i tried to soft reset my ipod touch with the top button and the screen button. it turned off and then went to the blue screen with the apple like it should. however, it now just stays on that screen. it has a sort of clock looking thing at the bottom of the apple that does not move either. it has stayed on this screen for over 4 hours. i also can not hard reset it in itunes. i am not really goood at this sort of thing. does anyone have this problem or a possible solution? thanks

See Here for
Frozen or unresponsive iPod touch
The Basic Troubleshooting Steps are:
Restart.. Reset.. Restore...
Try this First... You will Not Lose Any Data...
Turn the iPod Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

My Ipod has a white screen, and the lock button doesn't work. How can I fix this.

how do i fix my ipod?
its screen is white and my lock button does not work i can sometimes bearly see the screen which hepls me find my assistive touch. My friends have told me to put it into recovery mod, but this will not work because of the lock button being broken.

Place the iPod in recovery mode using this program:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Then restore to factory settings/new iPod. If still problem you have a hardware problem.

My iPhone screen went white when I did a screen shot. Now the screen will not go back. How do I fix this?

I have an iPhone 5 with 8.0 update. I was taking a screen shot and my screen went totally white. It will not go back to normal. It is still white. I can hear a text but can not see it. What has gone wrong? Does anyone know how to fix this?

Hi Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo . You will not lose any data . Cheers Brian

Apple Tv 2 has a white blinking light with the output of just the apple logo. How do I fix this?

Similar Messages

Maybe you are looking for