Apple TV (2nd gen) fetches complete movie before allowing to play it.

I thought that I could stream right after renting the movie, but in some case the Apple TV will just insist on fetching the WHOLE movie before to start playing it, it can last hours. I haven't find any configuration to force streaming.
Does anyone know a work around?

HD files are 3-4GB and tehrefore quite large.
Quality is fixed so a slow connection will require enough time to buffer an amount which allows complete playback without rebuffering at the prevailing internet speed.
Once enough has buffered the rest will download in the background if you start to play.
The annoyance with a slow connection is that if you do other things while the buffer is filling, the other activities can flush the buffer forcing the download to start from scratch.

Similar Messages

  • Apple TV 2nd gen - all purchased movies gone, cannot reload them

    I have purchased a few moveis and several TV shows. All of them appear in my iTunes library. I have my Apple TV set up to sync only those movies and TV shows I select, so generally after a week, it disappears from the Apple TV. I typically can go into the Apple TV prefs on my iMac and click on that movie, and then it will sync again.
    however, recently this happened, and I went to select the movie, and it would not upload back to the Apple TV (where it was originally purchased). In additon, all ofther purchases are gone, and I cannot get them to sync with the Apple TV.
    I have tried power cycle  the apple TV, the router, and unplugging all cables too.
    Reently I did deauthorize something (don't remeber what). I (re)authorized the desktop (imac) but that hasn't solved the problem. Is there a separate authorization for the Apple TV? I can't find anything in the setings menu....

    I assume you have the Apple TV 1.
    Navigate to Settings > Computers > Your Library on the Apple TV, you may be told you will lose all synced content, but you can sync it back afterwards, you won't lose any purchased content that has yet to be transferred. Then select Settings > Computers > Connect To iTunes, note the passcode that appears on screen, click on the device in iTunes and enter the passcode when prompted.

  • Can rent a movie from the iTunes store on my computer, and then stream it to my apple TV (2nd gen)?

    Can rent a movie from the iTunes store on my computer, and then stream it to my apple TV (2nd gen)?

    Thank you alleycat. I have two rental movies in my iTunes library in the rentals section top left of the window that have not been played. I have home sharing turned on on both my apple TV and my Mac. Both machines are completely software updated. I can see all of my owned movies in the Computer>Library>Movies section of the menus, but neither the rentals themselves nor a rental fouler are anywhere to be found on the apple TV. I dropped by the apple store on the way home from work and they suggested that it should be working just as you described, and suggested a restore, which I've performed. Still no rentals from the Mac library are visible on the apple TV. Any ideas?
    Riversmith

  • If I initially rent and begin watching a movie on my Apple TV (2nd Gen) can I later change and finish watching it on my iMac (same iTunes account)?

    If I initially rent and begin watching a movie on my Apple TV (2nd Gen) can I later finish watching it on my iMac (registered with same iTunes account)?

    The other way to do this would be to download all your rentals onto the Mac, then you can choose watch them on the Mac or Airplay them to the ATV.
    At least that way you can switch back and forth as often as you like during the "watching" period AND have 1 month to begin watching it after you've downloaded it.

  • HT1657 Rented movie on Apple TV (2nd gen.) unavailable?

    When I go to play my rented movie on Apple TV (2nd gen.) I get the message the movie is unavailable, try again later. It's been unavailable for over a week now. How do I get credit or make it play?

    You can either wait until later or go to expresslane.apple.com and seek help there.

  • Apple TV 2nd gen. When I rented movies from iTunes they won't play - says Loading error please try again later .....but never works

    HI.
    I rented two movies on my apple TV 2nd gen. and they won't play.
    When we try to play them it tries to load it and then says there is a loading error and try again later, but it never works.
    Has anyone else had similar? Does anyone know what's wrong and how to fix it?

    Same issue. Apple has my $4.99 and I have no movie!

  • Apple iPad 2nd Gen 16GB WHITE WIFI , Did a update,  Now it is stuck in I-Tunes Restore Mode. Do you no how to fix? Going crazy. Ran fine before that.

    Apple iPad 2nd Gen 16GB WHITE WIFI , Did a update,  Now it is stuck in I-Tunes Restore Mode. Do you no how to fix? Going crazy. Ran fine before that

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Apple TV (2nd gen) not showing up as a device in iTunes

    Hi all,
    I have this problem. The Apple TV (2nd gen) does not show up in iTunes under devices, and I really don't know why.
    Mac OSX 10.6.5
    iTunes 10.1
    AppleTV 2nd gen with latest update installed
    Network is a WiFi Airport Extreme (Mac and AppleTV are indeed on the same private network)
    Airplay works, home sharing works fine. Remote App on iPad and iPhone works.
    But the AppleTV is not showing up under devices.
    I had a 1st gen AppleTV which I reverted to "factory settings" before unplugging. The 2nd gen ATV had the same name as the 1st gen at the beginning, but I changed it afterwards figuring it might be related.
    Under iTunes > preferences I had the AppleTV tab. But I did read somewhere on Apple's site you have to "delete" the AppleTV from the list. So I did, and now the tab cannot be found anymore...
    Can anyone help?
    Thank you in advance.

    iMat77 wrote:
    I seem to recall though that I have seen a screenshot somewhere on the web where iTunes showed the ATV 2nd gen as a device.
    Not seen that, but the old ones have a logo that look (to me) like the new one, or at least a small darker grey than they are - they show up nicely in the iPad/iPhone Remote app though
    If you are right it would be huge disappointment!
    I believe I am correct as I've got new/old AppleTVs connected to 3 Macs and a dual boot Mac Pro currently, and the new unit has never appearede under devices.
    .... I really HATE the interface organization right now. Why on planet earth do I have to go under "devices" -> "computer" -> "music" just to play some music?
    You, me and many other AppleTV 1 users. I think they'd finally got it right in 3.02 for AppleTV 1 which is a much nicer user interface. Basically now the majority of the top level columns are unused by many people who don't rent but want to playback theit iTunes media.
    I firmly believe Apple see this new AppleTV as a relatively cheap accessory for iPads/iPhones/iPods to show video/photos via Airplay on your TV without using a computer.
    Secondly it's a vehicle for pushing itunes Store rentals, but for the majority of worldwide users they can only get Movie rentals, and Netflix is of no use bar in a few countries (US/Canada).
    I would have much more preferred that a "music" tab (it also applies to all other tabs, movies, tv series and so on) and then just a list of all "home sharing" connected computers from which I could pick the one where the music is stored. Or even, and being Apple it surprises me they didn't implement it, just the list of the available music on my network, with a little tab indicating in which computer it is located.
    Yes that would make absolute sense - a dynamic list of available content based on connected libraries that changes as new libraries appeared on/left the local network.
    The new menu organisation is quite shoddy to me, ut many users new to AppleTV like it and rave about the devices not knowing what the old one could do - it's a good device don't get me wrong, but I still prefer the older units except for their power consumption and the fact I feel they are more likely to fail due to their high temps and mechanical hard drives.
    But here I'm venturing FAR off topic.
    Don't think so, it's a valid comment.
    Use this:
    http://www.apple.com/feedback/appletv.html
    Thank you for your help anyway. I wait for confirmation of somebody else just to make sure...
    Fair enough.

  • HT1947 Apple TV (2nd gen) and Remote App - no more connection

    Since updating to the latest version of Apple TV (2nd gen) and Remote App for iPhone or iPad I can't connect any more. Worked for a short moment after restarting a few times but now no more. Must be a new bug, because it always worked before updating to iOS 5.1!
    I tried with an iPhone 4S and and iPad 2.

    Hi and thanks for your suggestion. Unfortunately this didn't solve the issue. I tried almost everything now:
    - I rebooted the WIFI rooter
    - I resettled the apple TV
    - I removed the cables of apple tv for a minute (I have a switch anyway to cut power off completely)
    - I killed the remote app on the iPhone and iPad a few times
    - I removed my account settings both on the i-devices and apple tv for home sharing a few times and activated them again
    All of the devices are in the same wifi network and every device can connect perfectly to the internet.
    The screen on the iPhone/iPad always just shows that I should activate home sharing on iTunes on the computer or on the apple tv with my account (what I did as mentioned above)
    Any ideas, someone from Apple maybe?
    Any ideas appreciated!
    Markus

  • Itunes crashes on addition of artwork to movie folder and apple tv (2nd generation) will not see itunes while itunes plays playlist over wireless network to airport express??

    I have 4 non apple pc exhibiting same issue. Whether you have ten movies on board the pc or 500 on external storage Itunes locks up after you "get info" and try to add video cover from IMDB whether the art is in my pictures on PC or off USB key / external storage. Very frustrating to the extent that I bought a macbook thinking that it may be a non apple issue and bingo same issue whether films on macbook or on nas/ external usb. Effectively itunes may be made to crash by adding artwork!
    2nd Issue noticed at weekend I have a small music library of approx. 35gb music in itunes music folder when a playlist was being played within itunes and airplay was selected to an airport express that is connected to distributed music system in house all works well during party. Guest have access to DJ app via remote app or control of content being player. My kids disappeared into the front room and while playlist on notices 2 things. The ipod touch ( 4 mths old) would not connect to apple tv player 2nd generation while airplay on to music system and the infra red remote remote worked fine but apple tv would not see video files in itunes while airplay on. When airplay disabled all absolutley fine , re- enabled airplay and apple tv bumped again. I have a wireless N router and have successfully had 2 apple tv 2nd generation working off itunes video files without issue. There are delays but both are seen in remote app and both players see itunes folders. I would have thought video streaming to apple tv players sucked up more bandwidth that one airplay to airport express and one apple tv 2nd gen.
    Anyone experienced same

    OK - I managed to fix this. Will document for others.
    I started to think it was a firewall thing. So I turned off both my Windows 7 firewall and my BT Home hub firewall. It started working!
    So turned back on the BT home hub firewall - still working. So it must be a windows 7 firewall.
    Went in and checked that Itunes was there as an exception... Yep. So why still not working?
    Found out that the entry in my Windows 7 firewall said I-Tunes - but when you looked at the details button it wasnt pointing to a program - it was just blank.
    So added a new entry and pointed that at the I-Tunes exe file.
    Now all working...

  • I set up a new airport time capsule. Most devices work fine however now my apple tv 2nd gen won't work.

    I set up a new airport time capsule. Most devices connected fine however now my apple tv 2nd gen won't work. I turn it on and it searches for time and date but goes no further. I can't by pass it either. Any suggestions?

    I can't by pass it either. Any suggestions?
    Does that mean you cannot move it to the TC and plug in by ethernet? What does bypass mean?
    I would still move it closer to the TC.. and just trial it there. Range on some AC models for 2.4ghz is worse than old one. For some people.
    Another thing to try is fixed wireless channels.. one of the very few options still available in the AC model.. lock the 2.4ghz to 11, 6, 1 .. try it in that order.

  • HT1947 Cant update my Apple TV (2nd Gen) with Remote app?

    I have been using the Remote app on my iPhone 4 top successfully control my Apple TV (2nd gen) for a while now after my Apple TV remote dropped in the toilet and stopped working! Now my Apple TV needs to update (Update Now/Update Later) and when I try to connect the Remote app to the Apple TV the Remote app just spins continuously and never finds the Apple TV, therefor not allowing me to select "Update Now". What to do? Do I now need to buy an Apple Remote? Hoping I dont have to.

    Hi and thanks for your suggestion. Unfortunately this didn't solve the issue. I tried almost everything now:
    - I rebooted the WIFI rooter
    - I resettled the apple TV
    - I removed the cables of apple tv for a minute (I have a switch anyway to cut power off completely)
    - I killed the remote app on the iPhone and iPad a few times
    - I removed my account settings both on the i-devices and apple tv for home sharing a few times and activated them again
    All of the devices are in the same wifi network and every device can connect perfectly to the internet.
    The screen on the iPhone/iPad always just shows that I should activate home sharing on iTunes on the computer or on the apple tv with my account (what I did as mentioned above)
    Any ideas, someone from Apple maybe?
    Any ideas appreciated!
    Markus

  • Sky Go content won't play on Apple TV 2nd Gen

    I have a UK Sky Go account and can download video to iPad.  When I activate Airplay to Apple TV 2nd Gen it will not display. Apple TV works fine with iTunes downloaded content.
    Any options/ideas to get this working??

    While I am pretty sure I had tried it, I just did a little rearrangement within my stereo cabinet which resulted in moving the Apple TV to another shelf.  And of course unplugging it to move cables.   After powering it up and redoing some of the setup, the movie plays properly.   So maybe a power cycle was needed.   Or maybe the problem resolved itself and the power cycle just coincidently happened at the same time.   Either way, my problem has been resolved.

  • MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen

    Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
    A little more about my MacBook Pro:
    Early 2011 Model ID: MacBookPro8,2
    OS: 10.8.2 Mountain Lion
    CPU: Intel Core i7
      Processor Speed:          2 GHz
      Number of Processors:          1
      Total Number of Cores:          4
      L2 Cache (per Core):          256 KB
      L3 Cache:          6 MB
    Memory: 4 GB
    GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
    This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
    Any suggestions, tips, ideas, etc. to get this working is appreciated!

    Rudegar wrote:
    your macbook dont support airplay mirror
    He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring.

  • 1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

    The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
    When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
    If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

    You can home-share multiple libraries but only use one account at a time.

Maybe you are looking for

  • Left Outer Join Not working in BI 7.0 Infoset

    Hi All, I am working on BI 7.0. I have to create a report where I have to display the Target values from a target DSO against the transactional data (Operational data). I have a DSO where for a “subteam” value target has been set up on different KPIs

  • Is it possible to assign a DEFAULT VALUE to [%1]?

    Dear All, Let's suppose I write a code like this: SELECT T0.Ref1 AS 'Doc Num' FROM JDT1 T0 WHERE T0.RefDate = [%1] When I run this query, it gives the foll. dialog box asking me to enter the Posting Date. Query Selection Criteria Posting Date       E

  • LSMW-BAPI Method sales contract creation

    Hi, I have a requirement to create sales contract through batch input or bapi method or idoc . Please let me know if there are any existing applicable methods for it. with regards, Bharath

  • Selection based on previous run date , time and current date a

    HI all, I have the selection as follows. Previous run date :  .12/14/2005..                     previous run time-14:30:56 current run date : 12/17/2009.                      current run time: 07:05:31 Here all are parameters. and  current run date i

  • LMS4.2 admin username cannot login

    Hi, I have installed LMS4.2.2 on Windows 2008 server and am unable to login via the 'admin' username. I get "Invalid Username or Password. Please try again" error message. I can successfully login using Windows AD username and password. I have reset