Apple TV 2nd gen, the picture is oversized as if the TV is in zoom mode. The Tv picture is fine, it only happens when the apple TV is on. Any suggestions on how to work this out?
The picture on my Apple TV display is oversized as in zoom mode. Not a TV setup problem, does anybody know how to correct this? I have tried resetting several times already.
Welcome to the Apple Community.
There are TV settings that can cause this, unfortunately I forget what they are, take a look in your TV manual as they may be called different things from manufacturer to manufacturer.
Additionally, check and confirm your TV supports 720p, some HDTV's don't. Finally, you are connected by HDMI I assume.
Similar Messages
-
I am using Apple ipod 2nd gen with IOS 4.2.1 . No i recently updated my IOS and all my apps were deleted. Now when i download IBOOKS it needs IOS 5. How do i get the apps which are copatible with IOS 4.2.1 or IPOS 2nd GEN??
You should always have your apps on your computer. If you have failed to keep a copy of the old app versions, then you cannot get them back at all.
Sorry.
Many app makers no longer support the old ios and ipod models -
I have an old AOL account not used for years. No I have realized some years ago I have signed in into the apple storewith this email. Now I am not able to change this apple ID. Has s.o. an idea how to work this out?
See this -> http://support.apple.com/kb/TS1299
-
The music stations on my Apple TV are cutting out. Any suggestions on how to fix this?
The music stations on my Apple TV are cutting out frequently. Any suggestions on how to fix this?
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment. -
While syncing my I phone it gets to step six "optimizing " and gets almost to the end and I get a message that itunes has stopped working and has to close. It get to like 1074 of 1138 items to optimize when iTunes quits. Any suggestions on how to fix this?
Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users.. -
Help...my Messages doesn't work. When I click on the Messages button, my phone thinks for a minute and then goes back to the main screne. Any suggestions of how to fix this?
Try a reset: Press the Sleep/Wake button and the Home button at the same time for ten seconds until the Apple logo appears. Note: No data will be lost
-
I have an eight year old IMAC with the Intel dual core. Today for the first time a fine white vertical line appeared on screen in all applications. I do not know if I did something or if this is a larger problem. Everything else seems to be working alright. Any suggestions on how to fix this problem would be appreciated. Thanks.
Eight-year old iMacs did not have Intel processors. Please do "About this Mac" from you Apple menu to see something like this:
Please post the "Version" under the big "Mac OS X" and the "Processor" information. These can make a big difference in advising you how to proceed.
iOS 4.1 currently shown in you profile will not run on a Mac computer; it is only for iDevices (Pads, Pods and Phones), so fixing that in your profile can help you get answers faster because people won't to ask for more info before forming an answer. -
I have an iPhone 4 and the speakers arent working and the sound works in headphones on when my phone is charging, do you have any suggestions on how to fix this?
Hi courteney17,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with sound on your iPhone 4:
iPhone: No sound or distorted sound from speaker http://support.apple.com/kb/ts5180
Cheers,
- Judy -
My itunes store won't open. Any suggestions on how to get this to work? I've already downloaded the newest version of itunes. I'm also not sure what Mac operating system I have..
To find the version of Mac OS X on your computer, all you have to do is click the Apple logo and then About this Mac. For more info, take a look at this doc -> Finding your OS X version and build information
Do you see an error when you try to open the iTunes Store on your Mac?
This Apple doc is a good place to start -> iTunes: Advanced iTunes Store troubleshooting -
The headphone connector broke off inside my Ipod, any suggestions on how to get it out?
The headphone connector broke off inside my Ipod, any suggestions on how to get it out?
See this previous discussion:
Broken headphone jack! 3.5mm dillemma....: Apple Support Communities -
I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!
iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.
-
My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
marie274 wrote:
My printer HP photosmart was working but now says printer not responding. Wireless network test came back with no problems. Any suggestions on how to fix this?
What exactly happens between the the time the printer was last working well and no on your system? Any updates or upgrades?
Lupunus -
Hi all, my external hardrive is no longer being recognized on my Macbook pro after I tried to transfer some documents from another Macbook( that used the Lion operating system) to mine. i'm currently using the Mac OS X 10.6.8. Any suggestions on how to fix this?
I suspect the drive got disconnected, somehow, on that other system and corrupted the drive because of the Disconnection.
Connect it to your system and open Disk Utility and see if the drive is even being seen. If it is all the data on is more then likely lost and it will need to be repartitioned and or just erased and reformatted. -
I downloaded apple mainstage and am pleased with it. However when i use it on my keyboard the the sustain pedal holds down the E note. Any suggestions on how to fix this?
If you have this problem (facetime dropping calls). Just go to settings, then general, and scroll it down to reset. Once on the reset, tap on reset all settings, it will ask your code. After you do this close out your iphone by pressing the main button on top of your iphone. I tried everything and this procedure works with me. Let me know if it works with you all.
-
My iMac freezes and sometimes shuts down on its own. Any suggestion on how to fix this? Thanks.
Might want to run the Apple Hardware Test just in case.
Intel-based Macs: Using Apple Hardware Test
If the hardware checks out ok the startup disk may need repairing.
Follow the instructions for Using Disk Utility to verify or repair disks
Maybe you are looking for
-
We have a volume license for Acrobat 9 professional, and I can see the key in my portal. We, however, do not have a disk for this license, nor is a download available in the downloads portal. Since we have purchased this software, it would be nice to
-
DisplayPort HPD IRQ and Power Down mode
Hi, I've been working with the DisplayPort IP V6.0 for a while now and have come across some potentiall undesireable/unspecified behaviour. All transactions on the AUX channel have been monitored using a Unigraf DPA-400 1.2 for reference We have the
-
Netscape.javascript.JSException: Native Window is destroyed
Supposedly this code closes the window in which the applet is displayed. try{ JSObject win = (JSObject) JSObject.getWindow(this); win.eval("self.close();"); catch(JSException ex){ System.out.println(ex.getWrappedException().toString())
-
Assigned document to operation in routing isn't printed in production order
Hi experts, I have assigned the document to the BOM and also to the operation in the routing.However this document is not printed when the production order is printed.This document can be seen at the routing,CA02, on the screen with all components, b
-
Hi there I have a Interface program which was working fine, This program receive a data file from third party and create the Element Entries. The process I used is to create a Batch Element Entries, which create a Batch and Batch Lines using "pay_bat