Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

Apple TV (3. Generation) still (17.02.2013) does not support the Microsoft Wedge Mobiloe Keyboard. I bought it especially for use with Apple TV but it doesn't work. Apple TV finds the keyboard with the exact name but can not connect. No 4 digit code appears that you can type in to your keyboard to compelete the connecting process and after a few seconds "connections fails" appears.
Now i dont't know if i should send it back to amazon to get back my money or keep it and wait until it maybe will work some day... I red from articles from beginning of january 2013 that a new Version of Apple TV is in the Pipeline (3.2) and that it has an other bluetooth chip. The same as in the iphone 5 that works with the MS wedge keyboard. So i really don't know if i should wait for the next few updates of my Apple TV or wait for a new Apple TV hardware- Update... Telephone calls with apple and microsoft doesn't brought useful results. Restore function of Apple TV doesn't work.
I hate that Apple always brew their own soup... Bluetooth is know for an easy connection to ALL devices but Apple TV supports only a hand full of keyboards. **** S**t!!!!!!!!!!!! -.-

Hi
This is the solution from Microsoft website. Work fine (don´t forget press and hold Fn key!!):
Connecting the Wedge Mobile Keyboard to a tablet PC
By default, the Bluetooth Wedge Mobile Keyboard pairs with most tablet PCs through secure simple pairing (SSP) with a passkey. Some tablets, however, may not support SSP well with a passkey.
In order to successfully pair your Wedge Mobile Keyboard to such a tablet, use the following alternative pairing mode.
Pair your keyboard through SSP without a passkey
Press and hold the Fn key at the same time as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on the top of the keyboard will blink green and red alternately. This means that your keyboard is discoverable to your tablet within 6 minutes.
On your tablet PC, from the Start menu, select Control Panel, and in Category view, locate Hardware and Sound.
Select Add a device.
When the keyboard is listed, select it, and follow the instructions to successfully pair your Wedge Keyboard with your tablet.
Note
If you want to pair your keyboard with a tablet or other computer that supports SSP with a passkey, press and hold the Connect button only.

Similar Messages

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface

Hi All,
I am trying to execute a stored procedure and store its result in an excel.
My query to execute stored proc and store sresults in excel
INSERT INTO
openrowset('Microsoft.ACE.OLEDB.15.0',
'Excel 8.0;Database=C:\TC\DataAnalysisFiles\DataAnalysisResult.xls;OLE DB Services=-4','select * from [Sheet1$]')
EXEC UspUnitTest_Test_CheckDuplicateModelNumberSerialNumber
I am getting error
The requested operation could not be performed because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the required transaction interface.
I have enabled below things by running scripts
sp_configure 'show advanced options', 1;
GO
RECONFIGURE;
GO
sp_configure 'Ad Hoc Distributed Queries', 1;
GO
RECONFIGURE;
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'AllowInProcess', 1
GO
EXEC master.dbo.sp_MSset_oledb_prop N'Microsoft.ACE.OLEDB.15.0', N'DynamicParameters', 1
GO
Please help and let me know if this can be resolved
Supriya Thigale

because OLE DB provider "Microsoft.ACE.OLEDB.15.0" for linked server "(null)" does not support the
required transaction interface.
Hello,
When you insert data from SQL Server into a linked server, then a distributed transaction should be started and here it seems this fails.
See
Distributed Transactions (Database Engine) for more Details +
Distributed Queries
Olaf Helper
[ Blog] [ Xing] [ MVP]

The Organizer does not support the color space in the file

I just purchased and installed PSE 8 as an upgrade to PSE 6. My catalog correctly shows all of my existing images. However, when I try to import photos into the Organizer, I get a message that nothing was imported. The reason given is that "The Organizer does not support the color space in the file." This happens with photos taken on my iPhone as well as those from my Canon PowerShot A1100 IS. Any suggestions?
Here is my system information:
Elements Organizer 8.0.0.0
Core Version: 8.0 (20090905.r.605812)
Language Version: 8.0 (20090905.r.605812)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:/Documents and Settings/All Users/Application Data/Adobe/Elements Organizer/Catalogs/My Catalog
Catalog Size: 83.9MB
Catalog Cache Size: 459.8MB
System:
Operating System Name: XP
Operating System Version: 5.1 Service Pack 3
System Architecture: AMD CPU Family:15 Model:11 Stepping:1 with MMX, SSE Integer, SSE FP
Built-in Memory: 2GB
Free Memory: 829MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: 7.65
Adobe Reader Version: 9.2
Adobe Acrobat Version: Not installed
CD and DVD drives:
J: (SONY DVD BUS: 3 ID: 3 Firmware: RW)

It turns out that this problem went away after the program crashed. Everything seems to be working well now.

Installed graphics card does not support the opengl features recommended

I've installed FCP6 on my PowerMac (PPC G4 DP 1.25GHz), and when I run it, I get a warning ("...installed graphics card does not support the opengl features recommended...") and the program ends. The graphics card is the ATI Radeon 9000 Pro (64MB)
I'm looking for a definitive answer regarding my hardware compatibility with FCS2 (specifically, FCP6). I'm NOT looking for an answer along the lines of: your system is too old to run this.
I've checked the minimum system requirements from the apple website (http://www.apple.com/finalcutstudio/specs/
and http://www.apple.com/finalcutstudio/download/):
* A Macintosh computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, or Intel Xeon processor
* 1GB of RAM
* An AGP or PCI Express Quartz Extreme graphics card (Final Cut Studio is not compatible with integrated Intel graphics processors)
* A display with 1024-by-768 resolution or higher
* Mac OS X v10.4.11 or later
* QuickTime 7.3 or later
* DVD drive for installation
I have all that stuff. What I'd like is to know which component of my system is FCP6 complaining about (vis-a-vis the error message above), alternatively, if someone has had success with a similar configuration, I'd like to know anything they think might help.
Thanks in advance for any helpful advice you may have.

The minimum would probably be an nVidia Fx5200 or an ATI 9600...
Patrick

I keep getting this error message "Your operating system does not support the 64-bit version of Silverlight" even though I have a 64 bit system?

Netflix requires Microsoft Silverlight plug in to view their videos. Every time I try to load it I get the following error message...Your operating system does not support the 64-bit version of Silverlight. I have a 64bit system with Windows Vista Home Premium. Firefox 33.0 is installed.
Any suggestions?

Your User Agent: Mozilla/5.0 (Windows NT 6.0; '''WOW64'''; rv:33.0) Gecko/20100101 Firefox/33.0
As said Firefox for Windows from mozilla.org is a 32-bit application. The WOW64 in UA means it is a 32-bit application on 64-bit Windows.
Before you ask if there will be a Win64 version of Firefox. If all goes well the first phase of having Win64 for Release may be as early as Firefox 37.0
https://wiki.mozilla.org/Firefox/win64

I am unable to sync my iPhone4 iCal to my Mac iCal. Snow Leopard does not support the Cloud. What do I do?

I am unable to sync my iPhone4S iCal to my Mac iCal. Snow Leopard is my OS and it does not support the cloud. What do I do?

To makeuse of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me., I ,have an iphone4 16gb ,brought in uk,it does not supports the india networks ,how to unlock it ,pls help me.

Have you asked your mobile phone operator to turn on roaming for you? and if you have you will need to turn on DATA ROAMING on the iPhone by going to SETTINGS > GENERAL > MOBILE DATA and turn on DATA ROAMING. You should then be able to see the various Indian Networks listed in SETTINGS > CARRIER and be able to make/receive calls.
If you are in India and didn't ask for Roaming to be activated on your mobile account you're stuck until you return to the UK.
OR
If you have a 'locked' phone that is tied to the UK operator then you will need to find a phone shop that unlocks iPhones but beware this invalidates any Apple Warranty. If you are still in the UK then phone the mobile operator and ask then to unlock your iPhone which they usually do if its not in a contract with them or at the end of the contract period.
Hope that helps a little, Andrew

Preview does not support the raw file format of the nikon d300s

preview does not support the files and snow leopard does not provide icon previews either.
is there any date when there will be support for these type of files?
any suggestions on how to open the NEF files with preview in the meantime there is an update?
regards

any suggestions on how to open the NEF files with preview in the meantime there is an update?
Not with Preview, but Nikon Transfer v1.0.1.3005 is so far happy with 10.6.1 and you may see if there is any advantage there. Take the card out of the 300s and use a reader if you have to.
It usually takes from 3 to 6 months before Apple releases a new/specific Nikon RAW related update, so you are at the beginning of that cycle it would appear...all you can do is wait, sorry.

This app does not support the contract specified or is not installed

I was successfully creating Windows Store Apps using Visual Studio 2013, using my dev account. VS has recently re-registered my ID as well.
Today, any Strore App (including "Mail", "Store", "PC Settings"...) not running nor any of project is not launching when I start debugging. It gives dialog as shown below. Also, as the app starts showing as installed in the
start screen, when I tap it there, it doesn't run. Just splash screen flashes for a few seconds and then disappears.
Microsoft Visual Studio
Unable to activate Windows Store app '3a829624-c06f-426b-8186-9312684573a2_bs4v6h88qrjp4!App'. The activation request failed with error 'This app does not support the contract specified or is not installed'.
See help for advice on troubleshooting the issue.
OK Help
If a post solves the problem you asked, please mark it as Answer.

This question needs to be asked on answers.microsoft.com. It is not a development question.
Matt Small - Microsoft Escalation Engineer - Forum Moderator
If my reply answers your question, please mark this post as answered.
NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
objects and unknown namespaces.

Win2012R2 error 364 Content file download failed.Reason: The server does not support the necessary HTTP protocol.

Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
System
Provider
Name]
Windows Server Update
Services
EventID
364
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-08-27T06:43:36.000000000Z
EventRecordID
390
Channel
Application
Computer
wsus-server.murrcz.local
Security
EventData
Content file download
failed. Reason: The server does not support the necessary HTTP protocol.
Background Intelligent Transfer Service (BITS) requires that the server support
the Range protocol header. Source File:
/msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
Destination File:
C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
The online help not works:
Content download has failed. BITS service is not starting or is stopping during downloads.
Open a command window.
Type sc config bits start= auto
Type net stop bits && net start bits
Type net stop wsusservice && net start wsusservice
Start WSUS 3.0: Click Start, click Administrative Tools, then click
Microsoft Windows Server Update Services v3.0.
Click Synchronization Results.
In the Action pane, click Synchronize Now.
Verify
Look for the corresponding error event.
Open a command window.
Type cd <WSUSInstallDir>\Tools
Type wsusutil checkhealth
Type eventvwr
Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
The KB922330 not aplicable, ExecuteSQL.exe not present.
Please help.
Thanks

.\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
Either your device is misconfigured, or it needs a firmware update to support the full specification.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

OATS CPU does not support the SSE2 instruction set required to run JRockit

Hello,
I am trying to get the OATS agents to work on some injector machines, however, when I try to start them I get the following error:
"[ERROR] Your CPU does not support the SSE2 instruction set required to run JRockit.
Could not create the Java Virtual Machine."
Is there a way to configure OATs to use the Sun JDK instead? I have the Sun JDK in my path and JAVA_HOME set accordingly, however that doesn't seem to make a difference. Alternatively, is there a workaround to this problem?
Thanks,
Michael.

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Does anyone know why Lion does not support the HP LaserJet CP1025nw and if there is a work around?

Does anyone know why Lion does not support the HP LaserJet CP1025nw and if there is a work around while we wait for a dedicated driver? HP claims apple provides the drivers but I am not certain of this.

See the following link for details from the hp.com site on using your model of printer with Lion along with a number of other FAQs :
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02915680&cc=uk&dlc=en&lc=en &os=219&product=4052972&sw_lang=
Thanks
AF

The network backup disk does not support the required AFP features.

I am trying to set up timeMachine on my new mac book pro over a regular home network on a shared network drive. I have tried everything but I keep getting "The network backup disk does not support the required AFP features." I am on lion with the lateset unpdate (10.7.4). I have even tried creating sparebundles on from tutorial that I have found online, but non of the hacks that I have tried seemed to work. Have anyone figured out a way around this? If so, can you share, it will be greatful. I could just buy the time capsule that apple sells but I already have a 2TB internal HDD in an old pc that's hosting my file server so no need for the time capsule hardware. Let me know if there is a way around this thank.

ookakaa wrote:
1) Apple time capsule
Or USB drive connected to a Time Capsule
2) NAS with the latest firmware
Not just any NAS. It has to support the communications protocols used by Time Machine (some involving security, some about error detection and handling). Some NASs never supported TM; some that worked on Leopard never got updated for Snow Leopard; and some that worked on Snow Leopard still haven't been updated for Lion.
4) Another networked mac (not a pc)
A Mac running Leopard 10.5.6 or later.
Are these the only options?
Those are the only options supported by Apple. Some other destinations may work, to some degree, in some circumstances. Some require "hacks" or other workarounds. Most are somewhat unreliable, and, may stop working at all on the next OSX upgrade.
Side note. I've been seeing some online post of how some people are setting up TM on a networked PC drive by setting up a sparsebundle like this site:
Any thoughts? I have tried some of these examples and it don't seem to work...
Some of those may have worked at one time, in some circumstances (2 are dated before Lion was released, the other is undated).
Wireless backups are tricky enough to a supported destination, with all the security and error detection and handling Apple has been able to employ. If your backups are important to you, don't trust them to a marginal scheme.
And, in any event, don't trust your backups to a single piece of hardware or software. See Time Machine - Frequently Asked Question #27 for an explanation and some suggestions.

Apple TV 3 does not support the Microsoft Wedge Mobile Bluetooth Keyboard

Similar Messages

Maybe you are looking for