Apple tv 3 shows green image or with static

Hello,
I have a problem with an apple tv 3rd generation.
As the title says, sometimes the image is green or just static.
I connect it through HDMI and have tried on 2 different tvs (other HDMI devices work fine). I even restore the firmware and nothing.
This is a short video of how it looks like http://www.youtube.com/watch?v=dRXzP0ZSJqo
Anyone knows what is wrong with it or how to fix it?
Thanks a lot.

Well my issue is fixed, turns out the update with which cause my issue must have locked somthing up in the settings.
I spent some time with one of the support people which is level two or higher and we found that the ATV3 had IP address etc setting for ethernet even with no ethernet/wifi available. We restored the ATV3 several times and even went to earlier versions of firmware to try to undo this, sadly this failed and my ATV had to be replaced, Apple sent out a new one now all is good again.
I suggest you contact them and if you are able to get them to replace it for you.
I did also notice that the iTunes update that came out at the same time had a problem which may have cause this to happen in the first place.
Restore did not work unless you help option key while hitting the Restore.

Similar Messages

  • Green images pixelated with black when opening in CS6

    Hi there,
    I have just come across a puzzling problem.
    I am editig some images of furniture I have taken. All images are OK apart from green ones? When I open them in PS CS6 they are havily pixelated on screen with black. When I save the image for web, the preview that opens up, then image is fine again. It seems to be just an on screen, in PS problem.
    Any idea how to solve this, it's very annoying!
    Thanks,
    John

    It's AMD that have been doing the tweaking/correcting. Catalyst 13.1 can be problematic for any version of Ps that uses OpenGL although you may not have exposed the problems until yesterday. Your example image shows the bug where a pixel with red component of zero is displayed as completely black.

  • How to show large images along with cursor while dragging ?

    Hi Friends,
    While dragging images, image has to be shown along with cursor. In normal dragging process, only (32, 32) size of the original image size only appears.
    But in my application, I need to show image with its original size along with cursor while dragging. So i need an application (program) or
    suggestions which can meet the above requirement. It is an urgent issue for me. Any help in this regard is highly appreciated.
    Thanks in advance,
    Sunil

    Learn to search the forums before asking. This is such a recent posting.
    [http://forums.sun.com/thread.jspa?threadID=5346407]
    db

  • My apple tv is showing an image to plug into i tunes

    My apple tv is sayong to plug into ituens.... and still isnt working

    the image mean that you should take a microUSB cable and connect the microEnd into the appletv and the normal usb end into your computer and from there use itunes on the computer to restore the firmware of the appletv

  • Shows green screen on start

    when i turn on the apple tv its shows green screen and then the tv search for signals..
    when i try in anuther tv its work ok.
    aneyone can help? i only have the apple tv 4 days.

    Do you have any of the purchase paperwork that came with your iMac.  It might have some of the info on it, i.e. the CPU type and
    First see if you can Boot into Safe Mode, Mac OS X: Starting up in Safe Mode.  If you can you can access the About This Mac menu option and the System Report from there to see if you have the recalled graphic card.
    If that fails see if you can Boot into the Recovery volume (boot with the Command + R keys held down) and access the About this Mac info from there.
    Or look on the iMac for the serial number and compare to this info:
    t
    he iMacs must fall in the following serial number configurations:
    The last four characters of the serial number must contain one of the following groups (for example, xxxxxxxxDHJQ):
    DHJQ, DHJW, DL8Q, DNGH, DNJ9, or DMW8
    DPM1, DPM2, DPNV, DNY0, DRVP, DY6F, F610
    If the iMac falls within one of the above the serial number categories and is confirmed to have the graphics card issues, Apple will replace the AMD card free of charge up to three years from the computer’s purchase date
    This is from this website: Apple opens graphics card replacement program for some ...

  • AF shows Green sq - Afterwards Display shows white sq with yellow sq - with image often blurred why

    New powershot 320hs - I'm getting the green auto focus bars when shooting a image, but afterwards the display detail shows a white sq with yellow inside square on the image I shot and the second tiny image for AF check tells me it is not sharp.  This happens often when shooting and I have to shoot several pictures of the same image before I get a sharp picture.  I noticed better results with face detection on but I'm shooting plant images so I don't understand why this is happening?  I have had other elphs without this problem.
    Rose Gatto 

    Hi ballina!
    Thank you for posting.
    There are certain limitations on how close to the subject the camera can be and still achieve a focus lock.  The yellow square indicates that the camera was unable to focus on the subject.
    How close to the subject is the camera when you are focusing on it?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Image not showing in Abobe integrated with Java WebDynPro

    Hi All,
    Image is not showing in Abobe integrated with Java WebDynPro.
    I did the following:
    Added the image field in adobe form. in URL value set the value of context node binding. Binding set to none and size set to Use Original Size.
    Then in script editor i wrote
    this.value.image.href = xfa.resolveNode(this.value.image.href).value;
    at innitialize , javascript and client.
    I can see the image from the same url context value if image field is created directly in WebDynPro View.
    Can anyone suggest what is missing?
    Thanks and Regards,
    Nuzhat

    Try changing your line of code for this one
    this.value.image.href = xfa.record.Images.URL;
    Check that the url passed by scripting is correct with a messageBox for example.
    You can also try assigning a hardcoded url at scripting level to check if its works.
    Best regards, Aldo.

  • With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    Having same issue here:
    https://discussions.apple.com/message/19043181#19043181

  • I forgot my admin password for my macbook and my macbook doesnt allowme to go on single user or boot up in safe mode or boot up with the option key all it does is show a image of a globe blinking everytime i try to do something

    please people help me i brought this macbook from a friend and now its ****** up its a macbook late 2006 and it dosesnt allow me to do anything everytime i click on a key to go on single user terminal or boot up cd or run on safe mode it shows a image of a globe(earth)

    Somehow the HDD is screwed up. Data saving issue is not directly Toshiba related issue and before you spend time here discussing about such things I recommend you to ask someone with good PC knowledge what can be done about data saving.
    When the HDD is in the notebook again start notebook as first step set BIOS to default settings.
    After doing this install recovery image. After doing this you will have clean preinstalled OS and everything should work properly again.
    I hope you will be able to do this using HDD recovery option.
    How to do this you can find on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm
    Have you maybe created recovery discs?

  • Iphone ios5..I upgraded to ios5 on my iphone 4 and in the demo video on the Apple website it shows a cute animation screen with the user dragging what appears to be balloons on a string how do you access this screen?

    iphone ios5..I upgraded to ios5 on my iphone 4 and in the demo video on the Apple website it shows a cute animation screen with the user dragging what appears to be balloons on a string how do you access this screen?
    Not sure if this is a game or app or not...it shows nothing about it and explains nothing about it...but it is there on the demo video on the apple website for the add to upgrade to ios 5...it shows the user dragging threads and the little icon monster at the bottom of the screen catches them

    Yea thats a game called "Cut the Rope" and it can be found in the App Store for $0.99 or you can buy the Lite version for free.

  • I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Turning it on then off doesn't help.

    I don't know what's wrong with my 3GS. It only shows the black screen with white apple. Home button and turning the phone off then on doesn't seem to do anything.

    Thanks Lucas,
    I've tried doing that with no results. Same screen keeps showing. Maybe it'd be more helpful if I told you a bit more info.  My phone was randomly playing music, and the voice control would also suddenly start without me touching the phone.  Then I let the battery die and started to recharge when on the screen it indicated to plug into my computer/iTunes, I tried to restore but was getting an error message (can't remember what it said now). Battery died and now my current issue of the black screen with white apple.  I'd love to be able to restore my phone but now its not showing as a device on my iTunes. HELP! Any other suggestions?

  • I restored my 3gs iphone and now it shows only black screen with apple mark... dont know what to do?

    i restored my 3gs iphone and now it shows only black screen with apple mark... dont know what to do?

    I would suggest you try to update your iOS 8.0.2 to the latest iOS 8.1.0 with iTunes on your computer. Don't try to do the update on your iPhone, it takes time and some error always occur. After updating to iOS 8.1.0, if your iPhone can't restart properly, try Wondershare Dr.Fone for iOS trial version. It will say that your iPhone is not in normal mode, offering you the option 'restart the device'. Just click the button to let your iPhone restart.

  • My problem is that the iPod does not turn on. Everytime I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a warning sign.

    IS MY IPOD DEAD?!?!?!?!?
    I think I have the previous iPod Classic with a black glossy front and I am pretty sure it is glass at the front. My problem is that the
    iPod does not turn on. Every time I attempt to turn it on it shows the Apple logo then a small icon showing a sad face with a
    warning sign along with the Apple support website. At the same time I can hear the internal mechanics which is also very loud. I have attempted
    to charge it as well as connecting it to itunes but no success. Could you please help?

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Plugins not showing up in Images - Edit With... menu

    I've installed several Aperture 2 plugins (I currently and using Aperture 2.1). Every user guide states I can find the plugins in the following menu: Images -> Edit With...
    The only plugin I ever see in the is Dodge and Burn.
    Like I said, I run completely through the installer for the plugins. It asks for permission, says its installing packages, writing files, writing scripts etc. When I right click on Aperture and select "Show Package Contents", I see no traces of my installed plugins in the "Plugins" folder.
    Anyone know how I can resolve this issue?

    I just reread your OP. The plugins should be stored in: Root (not User) >> Library >> Application Support >> Aperture >> Plugins >> Edit (or just plugins w/o the edit folder)
    Are they there?
    I just installed that plugin you linked to, and it worked fine. Have you restarted, repaired permissions etc? Remember that the Aperture application HAS to be in the applications folder, not in a sub-folder and not renamed to function properly.
    dls

  • Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix.

    Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix. Worked fine until now. Thanks

    I am not sure what's happening with IE9 (no live site) but I had real problems viewing your code in Live View - until I removed the HTML comment marked below. Basically your site was viewable in Design View but as soon a I hit Live view, it disappeared - much like IE9. See if removing the comment solves your issue.
    <style type="text/css">
    <!-- /*Remove this */
    body {
        margin: 0;
        padding: 0;
        color: #000;
        background:url(Images/websitebackgroundhomee.jpg) repeat scroll 0 0;
        font-family: David;
        font-size: 15px;
        height:100%;

Maybe you are looking for