Apple TV 3 won't show any networks

I have a Apple TV 3 and a IMAC and a Macbook pro and a Apple wireless router…I can connect using my iPhone,iPad and all the computers with no issues but the AT3 will not stay connected, it will either be connected and work for 5-20 mins and stream just fine and then lose connection and then I go to network and Wi-FI and it will not show any networks at all.  I've done all the steps as far as a reset of the AT3 and a restart of the AT3 also a restart of the apple router along with the cable modem.  It worked perfectly fine with no issues on 28th of August 2014 and I went away for the weekend and came home to a non working device.  I'm losing faith in my AP3 I may have to change to a amazon fire box instead.  I hope it's something simple, I haven't updated anything and everything is up to date my airport utility and my apple tv 3.

Hello TDIforthewin,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning Apple TV issues:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/HT200197
Resolve network or streaming issues
Troubleshoot Wi-Fi networks and connections.
Switch between wired and wireless networks.
Learn how to resolve issues streaming content from third-party content providers. Learn more about third-party content providers.
If you're streaming content from a computer or iOS device using Airplay or Home Sharing, try these steps:
Resolve issues with Airplay and Airplay Mirroring.
Learn how to use Airplay Mirrorring.
See how to set up Home Sharing.
Troubleshoot Home Sharing issues.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Similar Messages

  • TS1398 After updating to iOS 7 my iphone 5 won't show any wifi networks or connect to any wifi even after resetting the network connections. HELP!

    After updating my iphone 5 to iOS 7 my phone won't show any wifi networks or connect to any. I reset the network connections and still nothing.

    I Just found it on the apple site, it arrived on a cd a few days later and worked just fine again.
    i would recommend backing everything up just in case. Better safe than sorry, trust me. I've lost so much when i didnt back up once when re-installing the system.
    IT shoulldnt erase everything, bt it might, so back up just in case
    should you loose everything, then i have some tips on moving stuff fromyour iphone/ipod to the computer

  • Won't show any real instruments or vocals in the project.

    My GB won't show any live vocals or live instruments tracks. I can hear them, but cannot see them and I can't scroll downwards to view them.

    Yes. But I solved the problem. For some reason all the live recording tracks would not show. I created a new "live" track and suddenly they all appeared. Some  wierd glitch.

  • HP Photosmart Plus B210a all-in-one won't display any networks in the list.

    Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one.
    First off, it won't connect wirelessly.
    It won't display any networks in the list when searched for, it won't take my network details when I manually input them and it won't take any static IP address I've tried from other suggestions.
    Secondly, the print quality is very bad. Streaks and fading are occuring and after using up 70% of my ink trying to sort it out through troubleshooting it's still bad.
    It's extremely important for me to be able to have web access using the printer as all members of my household use it and it'll get fustrating having to car laptops and computers around to print.
    Can anybody help at all?

    Top line says "The wireless radio is not functioning. Contact HP support"
    I take this as a very bad sign and needs replacing?
    The tests I done produce streaks, fading and lines. I printed off two photos, one from a memory card and one from a scan. The memory card produced heavy blocked lines of color and the scan was just dull.
    I'm using a Wanadoo Wireless Livebox and Windows 7 64 Bit
    One other question... is this like a brilliant printer for photos mainly? I'm a Graphics design student and although my final prints are made from home I would like accurate and decent printouts for my portfolios. Should I keep this or go for another one with similar features and better print quality?

  • Photoshop CS6 is not showing any network drives within windows 8.1.

    Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
    And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

    The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local.  Network is not highlighted selected.
    Here is a CC Open one windows 7 pro showing  areas of what is accessible.

  • TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

    I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

    I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

  • I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks

    I am heading out to the US from NZ and I want to buy an Iphone, Will it work in NZ if I buy from Apple and do not connect to any network until back in NZ? Thanks

    When you get to the States, if you will be in an area with an Apple store for a couple days, call and ask about reserving an unlocked iPhone, it takes a couple days to get it in the store from what I understand.
    The current MBP 15" models are 2.2 and 2.4 GHz i7 machines.  There is a 17" with 2.5 GHz i7.
    The difference, in addition to the slightly faster cpu, is:
    2.2 GHz - Radeon HD 6750 M with 512 MB VRAM
    2.4 GHz - Radeon HD 6770 M with 1 GB VRAM
    Both have the same hard drive, 750 GB 5400 rpm, both have the same primary graphics - Intel 3000.
    So the difference is in the discrete grapics processor, important for heavy video work, heavy gaming...but will drain the battery a lot faster.
    You can get all the details on any Mac computer by going to http://www.everymac.com and click on the model and then scroll down to the exact machine of interest.

  • Wireless on imac won't display any network SSID's - 10.7.4

    Hi all, I have an older imac running Lion 10.7.4.  My router is a Time Capsule running 7.6.1.  Yesterday my imac randomly disconnected from wifi and hasn't been able to reconnect since.
    When I click the wifi icon no networks show up in the list; it simply shows a greyed out "No Network Selected".  My iphone and laptop each show 5 networks in the area including my own, the imac shows none.  I even set my iphone up as a pesonal hotspot to see if the SSID would show up - it doesn't.  I tried putting my network name in manually through "join other network"- nothing.  I have reset the computer and router several times each - nothing.  As far as my imac is concerned there are no wireless signals available.
    So here's the odd part, I assume the wifi card has just died and haul my imac into the nearby apple authorized repair center.  The guy plugs it in and it works no problem - shows the store's network and another one nearby and connects right away.  The guy ran one or two quick tests but everything's working fine.  I bring it home, the problem comes right back - can't see any of the wireless networks.  Works fine through ethernet.
    Any help would be greatly appreciated.

    Go to System Preferences > Network > Wi-Fi > Advanced, and delete all of the preferred networks. Then, try again

  • My Apple TV is no longer showing any of my purchased movies or TV shows

    My Apple TV is not showing any of the movies or TV shows that I purchased.  They used to be there under the "Purchased" section of movies and TV shows, but now the list is empty.  How can I get them to show up again?

    Hey taraannie,
    You may want to make sure that your device is still associated with your Apple ID:
    iTunes Store: Associating a device or computer to your Apple ID
    http://support.apple.com/kb/HT4627
    You may want to also sign out of your Apple ID in the settings of your Apple TV, then sign back in to make sure that you are connected with your Apple ID. Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • My iphone 3g wifi doesnt work and it doesnt show any networks

    my iphone 3g wifi is not working please help!! aqnd as well i cant see any networks list on it
    i am using 4.2.1 software on iphone

    If no change after resetting network settings on your iPhone and restoring your iPhone with iTunes as a new iPhone or not from your iPhone's backup, you can call AppleCare or make an appointment at an Apple store if there is one nearby.

  • Hi, I'm Having A Wifi Problem On My iPhone 4, It Won't Find Any Networks.. Please Help!!

    Hi, I'm Having A Wifi Problem On My iPhone 4, It Won't Find Any Network

    hey herb honcho,
    try this article
    http://support.apple.com/kb/TS1398?viewlocale=en_US

  • Giving me an app error,  says  "Download error" won't show any of my adobe apps, help!

    Help my adobe apps won't show up in the creative cloud area on my mac! says download error!

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • It won't show any of my artwork... PLEASE HELP!

    Anyone know what I can do?
    I manually put all the album covers in each song and it won't show on my Ipod nano..

    You should be able to get to it whenever you hook up your Ipod. Go to Options on your Ipod whenever you update it next, and tell it to update all your songs, instead of those you just added. That should fix it.
    But if that doesn't fix it, I think there might be a button that says to update artwork every time you update your Ipod.

  • Ncurses won't show any output nor accept input (SOLVED .sort of)

    Hi
    I have an elderly application (PB/PG for Linux) that builds and runs fine on other distros than ArchLinux (AL). When I build it on AL it builds fine, meaning that the include files and the library are found. When I run the program it does not show any output on the screen and it will not accept keyboard input.
    I must admit that I am somewhat at a loss as to what could be wrong, so any help will be much appreciated.
    Have any of you experienced this (or a similar) problem? And how did you solve it?
    Regards,
    Bent
    EDIT 2007-12-04: The root cause of this problem had nothing to do with Ncurses whatsoever. I have found another tree to bark up. Sorry for the inconvenience.
    Bent
    Last edited by BentB (2007-12-04 13:46:43)

    So rather quick addition.
    I just played with the AccelMethod option in /etc/X11/xorg.conf.d/20-intel.conf and found that this only occurs when it is set to "uxe" or "glamor" changing the setting to "sna" does not result in this problem.
    I had originally changed this setting from sna due to font rendering issues. I'll leave it as sna for now and see if those same issues still exist.
    Marked solved, but may not a good solution if font issues with sna are still present.

  • I have installed snow leopard and it has gone to the White screen with apple on an won't do any thing can someone help

    I need help I have installed snow leopard  as it told me to the screen went to the apple screen now won't do anything please help

    Are you certain your Mac meets Snow Leopard system requirements?
    Apple - Mac OS X Snow Leopard - Technical specifications
    Boot from your Mac install disc, run Disk Utility. The startup disk may need repairing.
    Using Disk Utility to verify or repair disks

Maybe you are looking for

  • Animated gif changes to black and white when exporting

    A student created an animated gif of a solar system for class. When he tries to export it as an animated web gif, it changes everything to grayscale.

  • IBooks author: Can't open the file because "index.xml" is missing, please help!,

    A project that I was working on yesterday and I didn't close it, today when I wanted to work on it and opened a new page there was a huge X on the page so I decided to quit ibooks then reopen it, saved all my changes first of course, but then when I

  • Creating directory or path on URL

    Hi Everyone, I have a simple questions where you Java gurus might be able to help me. I have granted access to a https URL, e.g. https://someserver.com/myfolder. I was able to authenticate and upload some files to the aforementioned URL using a simpl

  • Why can't I open iTunes on new iMac?

    My wife has a brand new iMac running OS X Lion. She already has an iTunes account which she accesses on a year old iPad. She can not access her iTunes library or even get the page to open on her iMac. Going to Finder - Applications, shows iTunes as o

  • SCVMM VM customization

    We create our VHDX using the WIM to VHD script at https://gallery.technet.microsoft.com/scriptcenter/Convert-WindowsImageps1-0fe23a8f. The resulting VHDX can be used to created a simple test VM in Hyper-V. When we boot this test VM we find both Windo