Apple TV 3rd Generation and LG tv

Hi Experts,
I've seen a number posts on this but couldn't find any of it that probably solved. I just bought apple tv and when goes into the HDMI mode, it shows an Apple logo and then blank with "No Display" sign appears. There's a voice of instructions can be heard from the tv (in a fast way). Is the tv incompatible with apple tv?
Appreciate your advice on this matter.

http://support.apple.com/kb/ht1551
Try step 6 below:
If your TV screen appears fuzzy or black (you see no video)
Make sure the television you are using supports the Apple TV resolution requirements. Please see the Apple TV technical specifications.
When you connect power, check to make sure the LED turns on. If the LED is not on, then verify with a known good power outlet or connect something else to the outlet you're using for Apple TV and make sure it works (such as a lamp or clock).
Make sure you're using the correct video cables and that they are connected firmly to Apple TV and to your TV.
Connect the HDMI cable directly into the Apple TV and your television, remove any third party devices or adapters.
Make sure the input setting you've selected on your TV matches the input you have your video cables connected to. See the documentation that came with your TV for more information.
Change the Apple TV resolution by pressing and holding the Menu and Up button for six seconds. The Apple TV will automatically cycle to the next resolution at approximately 20 second intervals. Pressing the Selectbutton will immediately cycle to the next resolution.
If you are connected via HDMI, try unplugging and replugging your HDMI cable.
If HDMI isn't working on an Apple TV (1st generation), try component cables instead (and disconnect the HDMI cable temporarily). Read more about HDMI vs component video.

Similar Messages

  • I have purchased an Apple TV 3rd generation and successfully installed it. I have enjoyed using this device. However, I don't see other devices other than iTunes on one of my Computers

    I bought the Apple TV as I have an iPAD 1st Generation, thinking I could pipe my iPAD to the TV. After messing around with it, and searching on-line, I find that I need an iPAD 2nd Generation as there is no app for mirroring for the 1st Generation.
    My other issue is; dDoes the Apple TV 3rd Generation allow access to other computers? I have a Media Storage device but the Apple TV does not "see" it, only one of my computers that has iTunes on it...I have almost all my media in Apple formats, but cannot access the device. It only allows me to see the iTunes app on one of my computers...why can't I connect to other computers on my network with this device?

    1, you can't mirror on the iPad 1 per se. However, some (not many!) apps do support explicit mirroring of the app's content. Note that the fact that an app supports TV out via the wired(!) HDMI / VGA doesn't necessarily mean it'll also work over the wireless AirPlay. (An example of them is ArtStudio for iPad. See the dedicated discussion at https://discussions.apple.com/message/18841572?ac_cid=ha123456#18841572 )
    2, the ATV can only access iTunes Home Sharing. No UPnP (see e.g. http://forum.maccast.com/index.php?/topic/18215-does-appletv-work-withe-upnp-med ia-servers/ ), no Samba, no AFP, no nothing. This is why you only see the desktop iTunes' shared videos.

  • I have an apple ipod 3rd generation and it will not let me download the IOS 4.3 even though it is on the computer. Right now i have the IOS 4.2.1 and i need it upgraded. Please help.!

    I just got this new ipod 3. I plugged it into the computer and i have itunes and it updated to the IOS 4.2.1 and now i have downloaded the IOS 4.3 to my computer but now how do i down load it to my ipod. ? when i open up itunes with my ipod and click summary below the picture is said backups and options. But nothing about updates. Please help ASAP!

    If you can't download using your phone, then just download it from Itunes and then sync your phone.

  • No "AirPlay" in Apple TV 3rd Generation menu

    I have an Apple TV 3rd Generation  (Model A1469) and I am trying to set a password for my airplay so that I don't have random people in my vicinity connecting to my TV. I know that there should be a setting available if you go to Settings>AirPlay, but I don't have that option in my menu! I have already checked for software updates and I have restarted the Apple TV as well and the option is still missing. Any suggestions?

    Hi DBTechnology,
    To make sure we are on the same page, when you go on your Apple TV and go to Settings > AirPlay > Security you are not seeing an option for a password or onscreen code. If you are not, then you may need to restore your Apple TV. Take a look at the articles below for more information on how to set up the password or onscreen code as well as restoring your Apple TV. 
    Apple TV (2nd and 3rd generation): Understanding AirPlay settings
    https://support.apple.com/en-us/HT202618
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    http://support.apple.com/en-us/HT202118
    Take it easy,
    -Norm G. 

  • Unsuccessful Apple TV (3rd generation) SW update

    Hi
    I already bought an apple TV (3rd generation),after connected it I checked it's current SW version and founded it's running an older IOS version 6.1.1
    and when i an the update process over wireless, it downloaded the latest SW but it failed to complete the update process
    I ran the above process more than 7 times and always I was getting the same failures
    can anyone help in this ?
    Note: I've also tried to restore it (wireless connection) and the same failure message appeared too

    You can connect it to a computer with iTunes on it (You need a micro-USB cable for that). Then you can restore/update the firmware through iTunes.

  • HT1600 Apple TV (3rd generation) cannot update

    Recently, my Apple TV (3rd generation) showed that I can update it.
    But while updating, it showed, "update was not successful". I have tried restart and restore it, but it did not work as well
    Do you guys have any ideas about how can I fix it ?

    I´ve got the same problem, tried several times to update my ATV3 to 5.1.1 but the installation process stops always at 95% of the 1st (out of 2) step displaying the message "update was not successful, try to restart ATV and then update again".
    I did so 5-6 times including latest time after disconnecting my ethernet cable and using wifi connection instead (as "pinette" suggested) but with no success.
    I´m a bit surprised of this malfunctioning behavior of an Apple application update process as these usually are smooth, trustful and successful.
    Can anyone please help me in giving a hint how to solve this issue? I´ve updated both ATV 2nd gen and ATV 3rd gen several times earlier with no problem whatsoever. My computer is a Mac Pro running Mac OS X Lion 10.7.5 (can´t run Mountain Lion OS 10.8 on this MacPro) and latest iTunes 11 (which runs without problem on the constellation MacPro/MacOS X 10.7.5). Do I maybe need a Mac computer running Mountain Lion on my home network for being able to update Apple TV 3rd gen to it´s latest software 5.1.1?
    If there is no forum member/guest having an answer to this question maybe some representative of Apple support can help me? Is there a working solution or stands this update problem for an application bug?
    Best regards,
    Stefan

  • Apple TV (3rd Generation Retail Demo Mode

    Hey guys!
    I'm kinda stuck here. I've been trying to activate the retail demo mode on Apple TV (3rd Generation) using the Right, Right, Left, Center button combination for our store demo model. That part worked, but from what i've read, there is supposed to be a retail demo reel that plays and I cannot get that part to work. It shows up in the screensaver section but when it activates, it starts up the normal floating photos from National Geographic. Does anyone know?! Please help
    Baz

    Not at all unfortunately. Must only be available for Official Apple Stores. Kept trying all the time, to no avail. Never mind

  • Apple TV 3rd generation

    Hi
    I have a question regarding Apple TV 3rd generation. Is there any information about the things of which the new product will be built? For example what kind of audio chip will be inside etc.
    I'm sorry for the level of my language but I'm not a native speaker.

    Welcome to the Apple Community.
    Nobody here will have any information about that here since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
    If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

  • Apple TV 3rd generation tv compatibility

    Is it possible to make Apple TV 3rd generation work for a tv which only supports 480i/p or 576i/p resolution?

    Yes, the Apple TV can output at a number of resolutions, including 480p and 576p, however the TV needs to support them for them to show up as options on the Apple TV.
    Unfortunately, I haven't been able to recreate the issue of the Apple TV not displaying on a TV and therefore haven't been able to test solutions, so the suggestion to set it up elsewhere is more of a try it and see.

  • HT1586 Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

    Can the Apple TV 3rd generation be played through a Danon receiver or is the only option to plug directly into the tv?

    AppleTV has no analogue connections.
    It has HDMI which can go to your TV or in theory to an AV receiver equipped with HDMI inputs.
    Some HDMI amps/receivers and HDMI switches can cause glitches with AppleTV but it really depends on the particular device.
    AppleTV also has optical out, so if you only wanted a connection for Dolby Digital or stereo feeds from the AppleTV you could connect AppleTV to teh TV via HDMI and also run optical to the amp.
    Audio is output over HDMI and optical simultaneously.
    AC

  • I have a i pod touch 3rd generation and i cannot download the correct version of i tunes to go with it

    I have bought a apple pod touch 3rd generation and my old itunes won't work with it when i download the newer version 10.6 which is what it tells me to do it comes up with i am not high enough or logged on as an administrator this is not true as i am logged on as an administrator and do not understand why this keeps happening

    i download the newer version 10.6 which is what it tells me to do it comes up with i am not high enough or logged on as an administrator
    What's the precise text of the message, please? (There's a couple of different ones I can think of that you might be getting.)

  • I got an iPod Nano 3rd Generation and it has scratches on the screen, and the warranty is already expired. Can it be repaired and how much is it going 2 be.?

    I got an iPod Nano 3rd Generation and it has scratches on the screen, and the warranty is already expired. Can it be repaired and how much is it going 2 be.?

    Hello HernanOtt,
    Depends on where you have it serviced.  Here are Apple's repair quotes.
    http://www.apple.com/support/ipod/service/prices/
    You would probably save a lot of money by having a 3rd party repair company do the job for you instead.  Just do a simple Google search for iPod repair and you'll get a plethora of results.
    B-rock

  • Apple tv 3rd generation iOS 5.0.2 icons ??

    Apple tv 3rd generation shows only two icons Computers and Setting only .. How to show all icons such Youtube and Netflix ??

    Restartin the unit can help.
    This often indicates AppleTV has lost internet connection for some reason.
    AC

  • My apple TV 3rd generation is not playing video Music from my iTunes PC

    I have video music that can run in iTunes in my PC, but when trying to play them in My apple TV 3rd Generation the system report an error. As well my Apple TV is not showing my video music I have store in my PC, them appears in iTunes at my PC but not in the Apple TV. What I can do to solve those issues?

    Welcome to the Apple community.
    Are you sure that the video you are trying to play is compatible with the Apple TV, simply because it will play in iTunes does not ensure it is.
    Video formats supported
    H.264 video up to 1080p, 30 frames per second, High or Main Profile level 4.0 or lower, Baseline profile level 3.0 or lower with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Audio formats supported
    HE-AAC (V1), AAC (16 to 320 Kbps), protected AAC (from iTunes Store), MP3 (16 to 320 Kbps), MP3 VBR, Audible (formats 2, 3, and 4), Apple Lossless, AIFF, and WAV; Dolby Digital 5.1 surround sound pass-through
    Photo formats
    JPEG, GIF, TIFF.

  • Does hisense tv supporte the apple tv 3rd generation?

    does hisense tv supporte the apple tv 3rd generation?

    any tv which is fullHD or hdReady (but then atv3 will not work in fullhd of cause)
    and follow the hdmi and hdcp std's are supported
    there are not made for appletv tv's out there (at least I hope not as that would be as much a scam as made for xbox or playstation)

Maybe you are looking for

  • Magic Mouse wont close program or window when I left click.

    Hi, so I bought me a new set up iMac i7 with among others the magic mouse 3 months ago. Not everytime but quite frequently when I try to close a program or any kind of window, by left click the red button on top left corner, it wont work, nothing hap

  • Problem building EJB jar file using Eclipse

    Hi, Here's my file sturcture. ejb\x\y\z\test\ ejb\x\y\z\test1\ 'ejb' is the root directory. The java source files under 'test' have a package name x.y.z.test. The java source files under 'test1' have a package name x.y.z.test1. I want to build a EJB

  • Idocs multiple message types

    Hi all, I created one custom idoc type with six segments. I heard that one idoc type can have any number of message types if it is so pls tell me how to assign these two message types for my idoc . i want to create multiple message types because i wa

  • Failed to deploy web application "ADFToyStore". Failed to deploy web applic

    Finding problem deploying ADF ToyStore application on Oracle10g server.The above message is being displayed for deploying ear/war deployable files. Also, I have an application (BC4J) built on Jdeveloper 9.0.3.4 and the same problem exists while deplo

  • Photo-size edits don't save

    All my other edits---color, contrast, effects, &c, all render and save when I hit Done or click another photo, but the Change Size slider edits don't seem to save: when I come back to the photo it's the same size as it was originally. And of course t