Apple TV 5.1.1 Update

Apparently this update was just released today (haven't checked my ATV3 to verify). Has anyone tried it yet to see if it fixed previous problems?

My 5.1.1 update failed as well. Mine was a little worse though. I rebooted the device  as it told me to and it would never boot back up. Screen stayed black and the ATV had the slow blinking light. Tried waiting 15 or 20 minutes several times. Strangly it would boot up without the network cable attached. I tried doing a restore from settings here (no dice since no network connection) and also reset settings. It attempted to go through the initial setup, but kept cycling back to the language selection menu.
Found the support article about restoring through iTunes. I just upgraded to iTunes 11 today as well. iTunes 11 would detect the ATV, but if I clicked the "Restore AppleTV" button I immediately got a "Device not found" error message. On my Macbook Pro running 10.8.2 and my Windows 8 machine.
Long story slightly shorter; I had to downgrade to iTunes 10.7 which finally let me restore the AppleTV. It put version 5.1.1 on it during the restore BTW.
Hopefully this saves someone all the troubleshooting time I had to do until Apple gets this update fixed and preferably get iTunes 11 capable of restoring an AppleTV still on 5.1 considering they both came out at the same time.

Similar Messages

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I Installed the Apple Software Installer 1.0 Update Tonight

    Hello-
    I am not sure if this latest Software Update messed things up, but there are a lot of problems with my MBP now that I just noticed tonight after I installed this Apple Software Installer Update 1.0.
    First off I am unable to watch any of the online videos like CBS nightly News, some of the BBC News Videos, as far as I can tell anything that shows its content on a video screen from the companies website.  I updated Flash Player about 2 weeks ago to the current version because I started keepng Flash updated to the current version, someting I wish I would have never started.  when I went to CBSnews.com, clicked on CBS Evening News, nothing  (not even a video screen) shoes up but in small letters it says Please Upgrade Your Adobe Flash Player. According to adobe Flash (current versions for MacOS-Safari) I have the correct Flash version and I have watched these news broadcasts seveeral nights on ABC, CBS, and many other videos on mostly news websites.  On ABC I noticed it tonight since I installed this Apple Software Installer 1.0 Update, it shows a blank video screen but in the middle it says, "This content requires Adobe Flash Player - Ver 10.1. (on top) and on the bottom is a link that says " Click here to get the latest version of Flash." 
    The latest version of Flash for a Mac using Safari is what I installed about 2 weeks ago and is 11.1.102.64.  I am not sure what ABC means by 10.1.  The versions confuse me, especially if I look in Safari under "Help"--> "Installed Plug-Ins", it usually just gives the first couple of numbers, but now I cannot even bring up "Installed Plug Ins" under Safari---Help---Installed Plug-Ins.  it just gives me a blank screen.
    Is it possible to uninstall an installed update?  it is a major deal.  any suggestions on what I should try?  I know people who hate Adobe Flash (seems like there are a lot) will say get rid of Adone Flash.  But whay would it stop showing me what is on the Installed Plug-Ins Page?  Before, I just did this the other night, I open a new tab, go to Help on Safari's Menu bar to Help, then Installed Plug-Ins and it usually fills up the blank New Tab page with all the Installed Plug-ins.  Down toward the end it will show me that Shockwave Player, I think Mac calls it is installed, and it just gives the first few numbers of the current version that is installed.  Now I get no Installed Plug-Ins.
    thanks for any assistance.  I looked up in the suppot articles how to uninstall an installed Update.  I was going to repair permissions, but I have only ever done that using the Operating Disk.  that is how I was taught by a genius bar person several years ago, and I just kept up with it.  when I repair permissions using Disk Utility from the dock, let's say I do a test run and 20 permissions come up, I repair them and nothing changes, but if I use the OS disk and repair the permissions, if there are a lot it will get rid of them all but it usually takes 2 runs at it.  I know this is different from what most others say,

    I use Firefox 95% of the time, and there's no problem with flash content (and I'm still at .55 - downloaded .64 last week but I haven't got round to making the change yet). At the rate they've been changing it recently it may well be out of date already .
    I've been trying it in Safari, too with no problems apart from You Tube, but that's because I'm blocking Google cookies.
    One thought does occur - if your Flash preferences are set to block all Local Storage, it may be that the problem site is trying to use Flash cookies (LSOs). I had this problem recently with the BBC iPlayer streaming content. Little Snitch notified an attempt to connect to a new URL - emp.bbci.co.uk.
    If I disallowed it, no streaming; when I allowed the connection, it still wouldn't stream, so I did a bit of digging and came to the conclusion that it was trying to set a Flash cookie. When I unblocked, lo and behold - streaming resumed as normal.
    I now have LSOs blocked in a more subtle way that lets the site think it's being set (but it ain't) and the streaming still works.
    As for permissions repair - always repair from local; the permissions on the original disc will have been superceded by updates and new installations of Apple software.
    DU needs to be reading the packages on the HD, not the (now out of date) install disc.
    The recurring repair messages are normal and don't mean anything's wrong. As long as the final message is 'repair complete' there's no need to dwell on it.
    http://support.apple.com/kb/TS1448 (for Leopard and Snow Leopard - Lion no doubt has it's own set).

  • I have two phones on one apple ID. After one updated yesterday on icloud it automatically took my contacts off and put the other ones on there. They still show up if I actually type them in when texting but not in the list.

    I have two phones on one apple ID. My son updated to icloud last night and when he did it took my contacs off of my phone and put his in there. When I go to text the numbers I can still find but when I click on the contacts they do not show. Is there a way to change this without restoring the last back up?

    You'll have to migrate one of the phones to a different account, then delete the other person's data from each account (you can continue to share the same Apple ID for purchasing from the iTunes and app stores). 
    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. 
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't from each account.

  • The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer.  How do I change that?  The apple id email is grayed out, so I cannot select it.

    The app store on my laptop is asking for my husband's apple id and password to update my apps, but he is not a user on my computer.  How do I change that?  The apple id email is grayed out, so I cannot select it.

    Delete and redownload those applications.
    (120219)

  • HT202716 How do I get the new WWE app to update on the app screen on my Apple TV ? Didn't update automatically

    HOw do I get the new WWE APP to add to the app screen on my apple Tv it didn't update automatically

    You can't add apps, it will appear when it's available

  • Is it possible to attend the apple store to get phone updated if i dont have access to itunes and im having hardware problems?

    i was trying to update my iphone 5 to the new iOS but some how in between it kept crashing. after a few attempts to install the update it automatically gave me the screen to which it was asking to plug into itunes and making the phone disfunctional . i dont have access to itunes and wont for a few more days. can i just take it to the apple store and have them update the phone to where is now functional?

    Make an appointment before you go to avoid delay:
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/

  • I have Mac OSX 10.5.8 and get java "error" message when trying to use research tool on Morningstar Java referred me to Apple but they had no update.Any ideas? thanks.e

    I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.

    Well I solved my problem.
    What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
    Anyway... relinking my folder of audio files did the trick.
    If you don't already know how here are the steps...
    iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

  • After updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    after updating iOS on my iPod touch 4th gen my Philips speaker dock DC290B/37 no longer charges the iPod.  It will play music but not charge, is there anyway to find out if Apple is working on an update/fix?

    Try:
    - Reset the dock
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    Otherwise you are out of luck. Apple is not making any more update for the 4G.
    Also check with Phillips. Maybe they have an firmware update available

  • Apple iOS 7 app auto updates and supervised devices

    I'm in the process of deploying a small number of iPads to our internal users, we had a question around automatic app updates in iOS 7. It would be nice if these devices were able to pull app updates down and install them automatically, but there are 2 problems with this for us. The first is that an itunes account was used to aquire a few free apps, these apps were then installed via configurator, but we will not be signing in to this account on the device. Default behavior unless a supervised iPad is plugged into itunes or signed in manually is to leave the apple id field blank, will updates install without an apple id on the device? Also, if a user signs in to there perosnal apple id will automatic updates download for an app downloaded with a different apple id? Second, were removing the app store from the device, but allowing apps to be installed. This should in theory allow updates to be installed automatically on the device, however we are unsure if this is the case. Does the app store need to be enabled for the device to check in? or does automatic updating happen regardless?

    I can now confirm the apple technician was incorrect. Auto updates WILL NOT install on a device that does not have an apple id signed into it. I've done as much testing as I could with and without signing in and none of the multiple devices I have will automatically download updates until I sign in to the account the app was purchased under. Ultimately this is new for apple, and in addition to that this scenario is faced by very few customers managing these devices So i understand getting this information incorrect. This post is more or less a warning to anyone managing supervised ipads where applications are being installed and no apple id associated with the device, dont rely on automatic updates to keep your apps up to date; you will either have to sign into the ipad and turn on automatic updating, or manually install each update via configurator when they are released.

  • My iphone 3gs have a problom because i tryed to downloud apps from my computer without apple id so i tryed update it to ios5 when i made an apple id and the phone restarted dureing the update and i restored it but now i can not activate it why is that ???

    my iphone 3gs have a problom because i tryed to downloud apps from my computer with out apple id so some times it restart and the spring board always get crashed so now affter i made an apple id  i tryed to update it to ios5 but the phone restarted  in the middle of the update so restored the files from my computer but when i tryed to activeate the phone from wi fi it said activeate server is now unavilable and when i tryed to activeate it from itunes it told me there is no sim card why is that

    My phone is an iPhone 3gs too, and last night actually it said the same thing, "No Sim Card" and my friend and I started panicking but I did what I call a "Forced Reboot" where you hold down the Home and Power buttons until you see the apple logo. DO NOT RELEASE UNTIL THEN otherwise you are just shutting it down. So, I did that and it worked again....

  • My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not workin

    My ipod touch will recognize my home wireless network but when I try to select it the wheel just keeps spinning. It looks as though I have a good signal but my router is an older apple extreme. I've updated to the lasted firmware but it's still not working. I have two older imacs and a wii that connect to the router. Any thoughts? Thanks

    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Setting>:General>Reset>Reset Network Settings.
    - iOS: Troubleshooting Wi-Fi networks and connections

  • AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

    AirPlay not working on any of my apple devices after iOS 6 update. Any ideas on how to fix this?

    If You are trying to watch content when you are downloading, it let it download then watch it this works for me as i had the same problem.

  • I have an A5X chip iPad with retina display with AppleCare . If my iPad broke would apple replace it with the updated iPad with retina display?

    I have an A5X chip iPad with retina display with AppleCare+ . If my iPad broke would apple replace it with the updated iPad with retina display that has the A6X chip?

    They will replace your "broken" iPad with an iPad of equal type .... so NO, they will not replace it with a new iPad 4th generation. They will actually replace your "broken" iPad with a refurb, not a new one.

  • I manage 60 ipads for a school using Apple Configurator. Need to update to iOS7 and AC1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new AC and iOS to work properly.

    I manage 60 ipads for a school using Apple Configurator. Need to update my devices to iOS7 and Apple Configurator to 1.4.3...Is it best to use Mountain Lion or Mavericks, as I also need to update from Lion 10.7 for the new Apple Configurator and iOS7 to work properly.

    I always run a Time Machine backup before updating anything and recommend you run a backup as well. Paid apps should migrate over without any problem. If you have problems with VPP codes not transfering over properly, you can talk to your Apple SE or contact VPP for Education support and they can help you. While I haven't experienced any problems with updating, its never a guarantee that others will have the same experience.
    Good luck!
    ~Joe

  • I'm running Windows 7 and iTunes and the other Apple programs wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system

    I'm running Windows 7 and iTunes (and the other Apple programs) wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system? Does someone know of some proprietory block (I think it is related to Quicktime)? Also, once I re-downloaded everything, cleaned everything up, and deleted duplicate files, I closed down my computer. When I re-started it, iTunes was "brand new" -- all of my music, organization, tagging, etc. was gone and had to start over. Idea?

    Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!

Maybe you are looking for

  • Help transfering files from IMovie to NAS (Synology)

    Hi, Hopefully someone here can help me, I am interested to move my IMovie events to my Synology NAS, I am not interested in using the NAS as a server for IMovie, I plan to view these videos independently of my Mac. Initially I have copied the files o

  • Email wont open

    I click on the stamp to open my email and it does nothing. Don't know how to fix it. Can anyone help?

  • Synchronize IR columns via plsql API

    Hi! I would like to use the package wwv_flow_worksheet_standard to synchronize the IR columns in my application out of plsql. Reason: My IR are based on views (simply: Select * from view_name) I have lots of them and they change frequently via plsql

  • MDM LDAP Integration

    Hi, We have integrated MDM with LDAP, by creating LDAP Roles & mapping them with MDM Roles. We are having log entries for Admin user for all repositories after every 10 milli-seconds. Any idea why these entries, how to stop this? 2010-03-03T22:56:22.

  • "tiling" plugin?

    I just upgraded to Photoshop Elements 9 from GIMP. I'm enjoying it immensely, save for one thing: it doesn't have a "Tile" plugin. GIMP had a plugin that would take an image, duplicate it a number of times, and then lay the duplicates out across a bi