Apple TV after standby and afterwards wake-up lets the tv-screen flash
When I set my Aplle TV to standby and try later to wake-up, the screen of my TV flashes and I have to restart the apple-tv - then it works.
The ATV is connected with HDMI to TV.
Can anyone please give me an advice ?
Greetinngs from Austria
i used to get this on occasions.
i replaced the HDMI cable with a better quality one and the problem went away.
Similar Messages
-
I charged my Ipod 8gb yesterday and after disconnecting it was frozen onthe Ejecting screen... afterletting it run out of battery I now see the apple on the screen and it has a clicking noise that it hasnever had before
Good Morning shann112577,
Try the suggestions below if your iPhone will not turn on:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
http://support.apple.com/en-us/HT201412
Regards,
Judy -
after resetting my phone to factory settings, it will not turn on. When i press the power button a white screen and black apple pop up. it stays on that screen and will not go to the home screen, it will just die. please help!
Make sure it is charged for about 10min using the adapter, then connect in recovery mode, explained in this article:
If you can't update or restore your iOS device -
my phone was showing the apple pic when i eraseed all content and settings so i did Pressed both home and sleep/wake buttons until the Apple logo appeared, then released the sleep/wake button and continued pressing the home button alone until iTunes detected the phone in Recovery Mode but an error is coming (1015) plz help me!!!!
plug into itunes and take it from there
http://support.apple.com/kb/HT1808 -
When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?
Hi there dworthen,
It sounds like you are experiencing issues when trying to rotate your display. I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Screen does not rotate
http://support.apple.com/kb/TS3805
-Griff W. -
My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?
I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it. -
My iPad has a white screen after trying to restore. I try and restore again and the same thing happens and we are back at the white screen. How can I get it back?
type HT4097 in the search bar. its unable to update or restore iOS. Follow the instructions and if that does not work then id go to the local apple store.
-
How do i select the "submit" after i enter my wireless passwork on the tv screen for apple tv setup?
how do i select the "submit" from the remote after i enter my wireless password on the tv screen for apple tv set up?
The 5 digit code is every time different. That does not matter. Just integrate every device into your network.
You can connect many computers to Apple TV but syncronisation works exactly with one computer. That's why I use "streaming". But you can sync one computer, then another, and so on. The content on your Apple TV is the content from your computer that has synced last. But you can not mix it.
The new Apple TV has no syncronisation. Everything is streamed,
Regards,
Torsten,
Germany -
Hello, I can't turn my iphone 4s on, it just broke down and now there's just the black screen with the apple logo on it. So I connected it to itunes and tried to restore it, but than always the errors 1603 & 1611 appeared! please help me!!
You may have a faulty USB cable. Try another.
Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
Disconnect the USB cable from the iPhone, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the iPhone.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Select the device in iTunes and choose "restore from backup".
If you still can't get it to work, you have done all you can and only Apple will be able to help. -
I downloaded OS X Lion on my iMac and I'm having problems with my computer waking up after hibernating. I can get to the login screen but my mouse will be frozen. The only fix's is a hard reboot. Any help would be great!
Try resetting the SMC and the PRAM.
1. SMC
Read this and follow the instructions for your kind of mac:
http://support.apple.com/kb/HT3964
2. PRAM
Follow the procedure below:
1. Power down the machine.
2. Locate the following keys on your keyboard in preparation for Step 4:
command–option–P–R
3. Press the ‘power on’ button.
4. Immediately – and before the grey screen appears – hold down ‘command-option-P-R’ all together.
5. Keep them held down until you’ve heard the start-up chime twice. After you release them you should hear it again, and hopefully your Mac will boot up as it should normally. -
I am trying to make an in-app purchase, and it will not let the trasaction go through after I click "buy." How do I fix this?
By 'not letting the transaction go through' you mean ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ? -
My Macbook pro, (late 2010) sometimes will sleep and won't wake up. then the sleep light flashes.What's the problem
Hi I've been following this thread (along with a different one on the same topic). I've been having the same problem with my ibook. I can add that I have no problem with startup. It's just that the screen "goes to sleep" unexpectedly and may operate normally for a few minutes or a few hours at most. Opening and closing the lid or restarting seems to cause it to awaken but then usually for just a few seconds or minutes. If it is connected to another video display that display continues functioning fine even though the computer screen is blank. In addition the desktop is there and visible faintly or if totally blank can be backlit through the apple logo and can be read. I've had my logic board replaced twice under the extended warranty and assumed it was that but now I'm thinking of the reed switch. Apple refuses to consider any further work under warranty as the last repair was in Jan, 06 and they claim only a 90 parts warranty and the machine is from 03. Any thoughts before I cut the wires? I have reset the pmu, run cocktail and disk utility. Other than the sleep issue the machine works fine. thanks Ronda or anyone else who has any ideas... Dave
-
wake up at the login screen of lion. It is almost like the whole screen is painted grey and moving my mouse side to side is like an erase fuction that reveals the login area one little square at a time. Similar to other posts.
I was so frustrated I call the Apple Tech Support and they walked me through. It has been doing great. The screen still turns black but now, when I touch the mouse or touch pad, I get the password prompt. The Apple Store did not help but talking the the Apple Tech has helped a lot. Thank you.
-
How can I get my email and message notifications back on the lock screen after the 5.01 upgrade?
After the 5.01 Lollipop upgrade I lost my email, text and voice mail notifications on the lock screen on my LG G3. How do I get them back?
Still didnt work...i dont know whats wrong.. i want them to look like this...
-
good night recently my iphone 4s was exchanged for a new one because was defective and was in warranty. the problem is that now I try to use the same apple id on itunes and applications while had bought the old iphone does not appear and I think should appear. Can someone help?
?
Maybe you are looking for
-
Transfer of sales orders from one plant to another
Dear all, My requirement is as follows: I have created some 500 sales orders (open) in one sales org+plant. Now due to plant shifting to other area, I want to transfer all the above open sales orders to another sales org+plant. One option is to creat
-
PDF Form Requires a newer version of Adobe Reader
New at this...Created my form in Live Cycle 8.0/Professional 8. Throughout company we are using Acrobat Reader 7.0 and are not at this time looking to upgrade. When our users open this form, get "This PDF form requires a newer version of Adobe Reader
-
i dont know whats going on but yesterday i was transfering new songs to the phone then suddenly the screen turns black and the phone dead. i took out the battery and restart again but all songs inside the phone gone and i cant transfer any songs now
-
Validation problem in Internet Explorer (Was: Internet Explorer problem)
Ive found a problem on my website ive got customer details as seen below, but the validation doesn't work in Internet Explorer. So for example the date is a validation, if i dont enter anything in there then it stills go to the next page. Any ideas o
-
Why do some pages crop off the side on an iPad?
Hi I have set up a site in Muse, all pages have the same master page applied, and no pages have any blank boxes sitting out to the sides. Some pages view perfectly on the iPad, and others jump out and crop off the right hand side of the page