Apple TV and computer browser
I've set up Apple TV and it connects to my MacBook Pro iTunes application without problem. But I can't figure out how to get it to play something I might be streaming on my MacBook on a web browser: a YouTube video, for instance, or streaming a newscast. There doesn't seem to be an option for this under the "computer" section of the Apple TV set up guide. What am I missing?
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.
Similar Messages
-
Question about Master Browser service and computer browsing across subnets
So i have a client that has a domain controller functioning as a DNS, WINS, and DHCP client for their two site network. They are "too busy" to actually migrate to the domain we set
them up from a workgroup configuration despite my assurances of a simple change over with virtually no user interruption.
They do however still want windows computer browsing services across their vpn tunnel between the two sites. Ive been pulling my hair out trying to get this done, but im starting to think its
just not possible without migrating to the domain. Any ideas?
The server is windows 2012 r2 standard and all the machines are on windows 7 professionalHi,
You can enable computer browsing service on workgroup computers, but as browser service is bound by broadcast segments, a cross-site computer browsing service will not work without primary domain controller (PDC).
See:
Description of the Microsoft Computer Browser Service
http://support.microsoft.com/kb/188001
If you have any feedback on our support, please send to [email protected] -
IPod stuck at Apple screen and computer won't restore iPod
My 80gb Classic is stuck on the Apple screen, and doesn't respond at all. It says to restore my iPod using iTunes, however, iTunes doesn't recognize my iPod, even though I've updated it.
I've tried restarting my iPod, updating iTunes, and repeated attempts at connecting my iPod. None of the support articles really help, and I've tried all I can think of.Try forcing the iPod into disk mode first, then connecting it to your computer and see if that makes it show up in iTunes...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Cheers,
Patrick -
Mountain Lion, Apple TV and computer to computer network
Hi there,
I have a second generation Apple TV with the 5.2 software update.
As per these instructions, I cannot seem to create a computer to computer network which the Apple TV will recognise.
The computer to computer network I create works because my iPhone can find and connect to it. But the Apple TV cannot even find it.
I cannot use the Internet Sharing feature because I do not have an Internet connection (or any other network connection) to share from any other input (ethernet, etc) on my Mac.
What are my options? Thanks!
KielNot tried to set one up recently, but AppleTV 2 and 3 don't seem to play well with WEP which may be the issue here.
AC -
My IPOD Touch 3G is frozen on the apple logo. It will allow me to reset it. The computer no longer will recognize it. I have tried on several Macs and it seems as though the problem is with the IPOD and not the computer since none of my MACs will recognize it.
You can try to put it on Recovery mode then restore it..
Press or Hold the power and home keys 10 seconds.
Screen goes black, now release the power button
Make sure you do not release the Home key until
your iTunes says "We have detected an itouch
in recovery mode."
After this its simple all you
got to do is a simple restore using your iTunes -
I am wondering if there is any way to keep my desktop computer from sleeping when it is attempting to sync a movie with iTunes, or when I am streaming content from my computer. Does anyone know how to do this without setting the computer to where it never sleeps at all?
its referenced in the Apple docs that not to sleep will not function. Use your screen saver at least.
-
Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4. -
I ordered a rental movie on my computer and want to watch it on my 1st generation apple TV and it is not showing up there...any suggestions?
I had same problem last night with a movie rental not showing up under the 'Rented' tab in iTunes/Movies on my iMac: as I had no other rentals, there was no 'Rented' tab at all.
In iTunes 11, the Downloads icon only appears next to the Search bar while there is an active download. Once any downloads are finished, the icon disappears. I had no icon so I had to assume the downloading had finished (in the previous UI you could check download progress even after they had finished).
My movie rental did, however, show up under 'Rented Movies' under the 'Movies' tab in iTunes/Devices/(select any i/device) so I knew it was somewhere in my iTunes. Yet, we couldn't access it via Apple TV.
I fiddle around for a bit, restarting iTunes, restarting the iMac, to no avail. Then I did a little housekeeping and moved a different movie I'd imported awhile ago, from the 'Home Videos' tab under iTunes/Movies. Under File/Get Info, the 'Media Kind' was incorrectly set to 'Home Video' so I changed it to 'Movie'. Thus the file was moved over into the Movies tab. Hey Presto! The Rented tab suddenly showed up, and there was my rented movie!
This is the second time a movie rental did not show up after downloading. Unfortunately my husband initiated the download so we figured he must've messed up somehow as he's not as familiar with iTunes as me. Hence we opted to download the movie under a different iTunes account, which worked the second time with no problem. Needless to say the invoice for the original download had no problem in finding us, hence we were effectively being charged twice for the same movie! We have to contact apple support (such a hassle) but hopefully they will understand the issue (that's the difficult bit) and they are usually good at refunding when they finally accept the customer is genuine in their claim.
In case anyone is tempted to critique my method, we download rentals through iTune on our computer as we had too many problems trying to rent via Apple TV. Often the movie was not available to watch for many hours after it was rented, even though we'd start 'download' halfway through the day and sit down at night to watch it! We have also had problems with movies that kept stopping during viewing because it wasn't streaming fast enough. We'd give some time and come back to viewing, only to encounter the same. One time we gave gave up and tried again the next evening, only to find the movie expired. There is meant to be 48 hours after you've started viewing to resume watching a movie. Apple's only response to this was to advise we needed a broadband internet connection to stream the movie - this was despite me already telling them we have broadband.
Anyway, I hope this helps anyone experiencing similar issues with movie downloads. -
I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support -
i didn't setup a two step verification for my apple Id , and then when i login into my account on the browser it prompt to enter my verification code !!! HOW COME
please help because all my data are stored in the cloud- See if it is listed here for downloading. If it is then redownload it..
Downloading past purchases from the App Store, iBookstore, and iTunes Store
- If not there then contact iTunes.
Contact iTunes -
My MacBook Pro stated that it needed to be updated. I clicked yes to restart the computer and update but when it restarted it stays on the gray screen with the apple logo and then pops up, stating "unable to find driver for this platform." What do I do?
Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, follow the prompts to reinstall the Mac OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac didn’t ship with Lion, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
Don't install the Thunderbolt update -- it's defective. -
I downloaded a song from itunes and it says my computer is not authorized to play it, to authorized enter your apple id and password so I did, then it said that this computer was already authorized, but it still won"t let me play the song! What do I do?
Apparently not!! I am NOT happy about it either! I had always bought my mp3's from walmart.com (until they quit doing it) & ANY time I had a problem, they had it corrected in less than 5 minutes! Apple is a large enough company, that they should have an EASY to find support system. Having to post on here, WAITING for someone who MIGHT know how to fix it, is aggrevating!! I WILL NOT BE BUYING ANY MORE MUSIC FROM ITUNES & WILL BE GOING TO ANYTHING OTHER THAN AN APPLE PRODUCT!
-
I have successfully changed my apple id via computer. Now, how do I change it on my actual phone? I have the 5.1.1 iphone 3G.
I recently changed my email address and want to change my Apple ID account to match. I have created a new Apple ID to match the new account but now I can't sign into iCloud on our phones or computer with the old Apple ID. I can't make any changes on iCloud on our phones because it directs me to the old account, which I can't sign into. I also can't sign me in on my computer to make any changes. Help!!! Now I have two addresses and can't access the one that directly affects my devices.
-
I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
Hello
I was having some problems with my Imac, for a while it was slow and often disconneceted from my wifi, while this one worked perfectly (tested with other devices)
I thoug i might have a virus, so i downloaded an antivirus (mac keeper) and started checking.
I also did a scan of my computer using Console or something from the utilities, and then a folder popped witha file I had canceled a while ago. I canceled the file and then my Imac continued to be slow.
i then restarted my Imac, but when it started, the usual grey logo of Apple appeared, and then it shut down suddently.
I tried to reboot it holding the command key and R but nothing, and then i tried holding the shift key and a bar appeared, and at half of the bar it sut itself down again.
I think it is probably a preoblem because I may have cancelled some of the system files from a folder called "private" in the "documents" folder.
Is there any way I can recover some of my files? maybe all of them? I hope so because I have some important files there
Is this a thing I can do myself or do Ineed to go to a MacStore to repair it? Will I need to change HD or just to format it and reinstall? also if there is any way i can recover some of my files that would be great.
Thanks
Ludo
P.S. problems appeared when i installed the Mavericks version.If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk.
Maybe you are looking for
-
"Unable to initialize video deck" inquiry
I am new to Mac and FCE, so I ask for some slack... I am trying to get video from my Panasonic AG DVX 100 into FCE. About my system: IMac 2.4 GHz Intel Core 2 Duo with OS X 10.5.2. I have FCE 4 on this computer, not an upgrade of earlier program, but
-
Hi, I was wondering if someone can help me. I have a MacBook Pro, it has came up saying I need to free up space on the disk as it full every time it starts up, so I log in and no icons or applications show up on the screen just my background wallpape
-
3d modeling and texturing in Photoshop CS3 Extended
I spent longer than I care to admit today trying to figure out how to get a model into Photoshop and texture it. I couldn't find any native tools for modeling or texturing, which led me to do these things in external tools, relying on Photoshop for
-
Oracle Install folders in Temp folder
Are the OraInstallyyyy-mm-dd-hh-mm-ss folders in my temp folder safe to delete? There are four of these folders totaling 109MB. I'd like this space back if Oracle doesn't need it. Thanks, ld
-
XMPToolkitSDK64 build error Xcode 6
Hi, I'm trying to build the the sdk with Xcode. I ran the shell script and selected option 4 to make a dynamic 64bit Xcode build. The shell was successful and I opened the XMPToolkitSDK64.xcodeproj. There was a warning to automatically update the pro