Apple TV and Dual zone receivers
I have the lasted ATV and hooked it up to the surround sound. It works great throughout the main room but turn on the dual zone or 2 source I get no sound. Now after research I find that the dual zone only plays analog and not digital. I know i need to buy a splitter or converter. any recommendation. Also My question is how do I set it so I can still get digital out in main room and TV and then analog to 2nd source.
By default, the dual-band AirPorts provide two wireless networks with the same Network Name. In the 2.4 GHz band, 802.11b/g/n is supported, and in the the 5 GHz band, 802.11a/n is supported.
I believe the Apple TV can only operate in the 2.4 GHz band, as well as, the iPhone. However, the Apple TV is capable of 802.11n in that band, while the iPhone is limited to 802.11g.
Unfortunately, there isn't a radio mode option to separate the 2.4 GHz band between 802.11n from 802.11b/g wireless clients, so connecting the iPhone will degrade the overall bandwidth of the 2.4 GHz radio.
Similar Messages
-
I have to have two apple TV to play different playlists using the same AV Receiver dual zone?
Hi folks.
I have a AV receiver dual zone and I'd like to play different playlists from my computer in each zone. To do that i have to have two Apple TV connected in this Receiver?
Thank you in advance.
cntgHi,
There are two easy fixes to this.
One, you can set up Family Sharing, in which you can have two different iCloud Accounts, yet still share the same apps, music, media etc.
Two, go to Settings and turn-off "Handoff". This can be found under the General page.
Hope this helps! -
Apple MiniDisplayPort to Dual DVI adapter and 30" displays
Hi all,
I just purchased a DoubleSight DS-305W 30" display only to learn it doesn't work with the Apple MiniDisplayPort to Dual DVI adapter. I had the flickering issues described in length here:
http://store.apple.com/us/product/MB571Z/A?mco=MTY3ODQ5OTY
I thought it was the adapter firmware issue, so I drove 3 hours in the snow to the Apple store to get a replacement with the new firmware (1.0.3). After doing so, the issues persisted.
I am now wondering if anybody has experience with other 2560x1600 monitors and this adapter. I am considering buying a NEC LCD3090WQXi-BK -- has anybody tried this one? Thanks in advance.My apologies for reading your mail after almost 2 years !
Perhaps my reply may still have some relevance after 2 years. I am using HDMI to DVI connector to connect my Mac Mini Mid 2010 to Samsung XL2370 Monitor. -
I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.
When Microsoft decided not to support Windows Media any more, they made Flip4Mac available for free. If you have not taken advantage of that free download, this might be a good time.
It may not completely solve the problem, but your Mac will play more with the free player. No need to pay for the Upgrades.
http://www.telestream.net/flip4mac/ -
Can i create a new apple ID, and still have access to the purchases i made on the old one?
I recently updated my apple ID email address, and Password to my current (newer) address. upon doing so iCloud went completely crazy, changed the timing zones on my calendars, and removed or changed data on my Mac, iPhone, and iPad.
i have tried, in vein, to get a verification email sent to me from apple so i can get my iCloud account working again, however no such email has arrived.
soon i will be taking my Mac to an Apple store to get the Harddrive wiped clean, as Mountain Lion has well and truly messed it up. what i am wondering is, if i where to create an entirely new apple ID, and start from scratch would i still have access to the apps and song purchases i made on the on the old account?Well yes, but if you want to update those apps, you'd need to sign in under your old Apple ID to update them. It's really best to just stick to one Apple ID, or you'll run into association complications down the road.
-
I am trying to set up Icloud keychain, but it keeps sending the verification code to my land line (which I guess I entered back when I first got my MacBook). I have gone into my apple account and changed the # to my mobile phone, but it continued to send it to the land line. Probably is something simple, but I am not a techy!!
Hi,
As regardss to the iChat and iChat Sharing categorisation you have used.
In iChat 6 (lion) and Messages (Mountain Lion) the apps login to AIM and to Me.com
The Login to Me.com allows AIM to verify the password to the iCloud issued names (@me.com and @iCloud.com)
This "Dual" login also prevents the newer iCloud issued name from using this site
(it has extra Privacy settings that iChat can't access for your AIM and Aim valid Accounts)
Ignoring the @mac.com and MobileMe entries in the Add Account Screen in iChat and using the AIM one does not get around this issue.
AIM and @mac.com names still work in older versions of iChat.
The short answer is that iCloud issued Apple IDs do not work in iChat 5 or Earlier.
10:12 PM Friday; February 15, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I downloaded Mavericks and it won't install. I did re-set my password and when I click on Install for Mavericks, I still get a box for "administrator password" and it still won't accept my new password. Is there a difference between my Apple ID and the administrator password they're asking for? I never had an administrator password-- I just hit enter and have never had a problem before with previous installations. I'm on an iMac, from 2007, running Mt. Lion (version 10.8.5). I've been looking for other's posts who may be having the same problem, but haven't found any. Can anyone help?
Ugh. The 'no password, no work' thing is a recent Apple development. I ran into it on my system and ended up having to do a clean install on a partition I fully erased.
I suppose, if you have the ability to, go online and look up how to burn a bootable DVD image. Download the 10.8.4 image then use the Disk Utility to make a boot image of it. You'll need a dual-layer DVD or a USB drive (or memory stick at least 8GB) If you've got an optical drive, burn the disk, if you've a USB device, use that.
Then get a pocket drive and copy your important files off the system or let Time Machine do a full backup.
When the backup is done, insert the disk and hold down the C key until the machine boots off of the DVD. At the point you get to the start window, go to the menu and choose the Disk Utility.
In the Disk Utility, reformat the drive. You go to the actual DRIVE (not the Macintosh HD, but the root above it that is the actual hard drive device)
I always do this and *partition* it into several volumes, the benefit being, you can store all of your music, documents and importans stuff on that secondary storage volume you make - it will have it's own index and then the first volume is where you put the OS and it will have it's own index as well. That way, if the OS throws a wobbler and you need to reinstall, you don't lose your data.
Depending on the size of your hard drive, it is good to give your OS partition at least 60GB and optimally 100GB, and the rest for storage.
Name your volumes, use the little box sliders to manually size them or put that number in the size window, select for the format, Mac OS Extended (Journaled) and hit Apply and then the Disk Utility will quickly create your new partitions.
Once finished, quit the Utility and it will return you to the OS installer. Select the volume you want to install to and it should start up and install.
Once the installation is done, you'll get the new machine startup then you MUST put in a password for the computer. Once you're in, and to the desktop, don't bother with any Mountain Lion updates, go right to the App Store and get the Mavericks update and let it install the app to your Applicaitons folder, then do that install.
On a side note, there MAY be a way to make a disk image from the Mavericks application and avoid the entire Mountain Lion step.. I honestly do not know, but a bit of hitting the search engines may find out if there is. I think that if you looked for "make Mavericks boot disk or boot image' you may find something.
Good luck! -
Any help? I am unable to change my settings because my iPad is not recognizing my Apple ID and password. Everything is correct,but I keep getting the message that an error occurred during activation. Try Again.
Thank you!Try this. Go to Settings>General>Date & Time>Set Automatically>On. Make sure that the time zone setting is also correct.
-
I updated my Apple TV and my itunes says there are no purchases?
IIt's says there are no purchases.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature) -
Nvidea GeForce 7300 GT and ati hd 5870 issues with mac pro and dual monitors etc
I have a mac pro 1,1 running 10.5.8
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 8 GB
Bus Speed: 1.33 GHz
I installed an ati 5870 and fcp 7 wont run, it says no vram. so I reinstalled the NVIDIA GeForce 7300 GT. This card however doesnt support my 46" sony bravia client monitor via vdi to hdmi (with adapter) is there anyway to make it do that (patch, driver, tweek to card)? also what other card should I get that will support the 30" apple display and the sony. I have another system luckily thats newer that I work on with clients, but I dont want to foresake the other mac pro yet. is the 5770 going to work? Please let me know what you think, I greatly appreciate it. Also my system profile doesnt say I have pci express 2.0 on either my old or new mac pros.
why are there no patches for this card, updates, drivers? nada. let me know. thank you.*Is it possible to run the factory NVIDIA 7300 GT side-by-side with an ATI Radeon HD 4870 to achieve a three monitor setup?*
Yes with OSX. There may be problems with Boot Camp. -
I have two screens on my Apple Mac and could extend work across both. Now updated to Mavericks and this no longer works. How could I restore the previous functionality? Is somethong wrong?
Hi Eustace.
Thanks for replying to my problem. After posting I noted the "More Like This" box on the right of the screen. The top topic was "Restore old dual screen functionality" and turned out to be the the same question with a surprising answer - in the "Mission Control" dialogue, NOT the "Displays" dialogue. There are five tick boxes at the top of the Mission Control screen and the last of them is "Displays have separate spaces" and this box was ticked through the loading of the Mavericks op. system (presumably). Unticking this box, as advised, restored the 'extended' mode and all is now well.
We live and learn! -
Side by Side: Apple Aperture and Adobe Lightroom in S.F.
Below is info on a first ever (?) head to head comparison of Aperture vs Lightroom presented by Schorr & Hogarty. Should be a great meeting. If you are in Nor-Cal, check it out;
March 13 in S.F. http://www.asmpnorcal.org/events/event.html
Side by Side: Apple Aperture and Adobe Lightroom
Speakers:
Tom Hogarty, Product Manager for Lightroom, Adobe Systems
Joseph Schorr, Product Manager for Aperture, Apple Computer
This Tuesday join us and the designated gurus from Adobe and Apple
for a lively evening as we jump headlong into both Aperture and
Lightroom and discover the nuts and bolts of how these applications
work. You'll learn how these programs were designed from the
ground up for media photographers from the guys who helped design
them.
Dual 2.0 G5 Mac OS X (10.4.8) 17" PowerBook 1.67
Dual 2.0 G5 Mac OS X (10.4.8) 17" PowerBook 1.67Wow, maybe this is what Schorr meant by "VERY soon" in this post in this thread on March 10th.
"Actually, Apple has annouced that Aperture support for the Pentax K10D, K100D, and K110D will be available very soon.
We will also be adding support for 11 other RAW formats from different cameras, including the Nikon D40, Leica Digilux 3, Panasonic Lumix DMC-L1, Samsung GX-1L, and seven of the Leaf Aptus and Valeo models.
Can't publish a release date, but this update will be coming VERY soon.
Joe Schorr
Sr. Product Manager, Aperture
Apple"
http://discussions.apple.com/thread.jspa?messageID=4209290�
If so, as a Pentax k10D owner, I will be happily cleaning Lightroom of my machine and moving ahead with Aperture!
iMac and PB G4 17" Mac OS X (10.4.8) -
Since loading mavericks my calendar posts events one hour late. That is, if mtg invite is for 9am it posts at 10am. my pc clock and time zone are correct.
Hey Armando Stettner,
Thanks for the question, and what a great question it is!
With time zone support on, you can edit an individual event and change the time zone for that event. This list will include options for your default time zones, UTC, and "floating" - the latter of which is what you are looking for. Floating changes the event to occur at the specified time, local time.
For information on changing an event's time zone, see the following resource:
Calendar: Change an event’s time zone
http://support.apple.com/kb/PH11531
I look forward to hearing how this works for you.
Cheers!
Matt M. -
I have purchased movies on Apple TV and I've been able to watch them immediately. However, if I do not finish watching it and come back later the system does not allow me to continue watching and it does not reflect my rental. This used to work fine, why is it not working?
Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals. -
Hello buy a movie on apple tv, and now can not find the device tells me I should go to settings / downloads / check downloads, but that does not exist in the menu of the apple tv, please help
Welcome to the Apple community.
A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.
Maybe you are looking for
-
Note 779844 Inheritance of trading partner to line items
hello I need to apply OSS note 779844. This Note has three steps: 1. A series of source code changes in the system (done through Tx. SNOTE). 2. Modify database table GB01 by adding to boolean class 15, table BSEG, the field VBUND (company) 3.Implemen
-
ITunes says I haven't authorised it on my computer even though I have
It keeps giving me various error messages, such as number 3048, and I can't download my things that I bought on iTunes, including episodes of various TV shows. I've signed in and authorized iTunes multiple times.
-
After I downloaded Morzilla and opened it, an aol page with all kinds of junk appeared
New computer. I downloaded the latest Morzilla Firefox browser software. When I clicked on the icon an aol page was there with all kinds of junk...not the morzella-google page. No morzilla toolbar, no bookmark capability. Just aol ads. I am already a
-
Does the Pop-Up Menu causes the Video a small jump to the closest Pop-Up chapter?
I have setted five Pop-up Chapter Menu for my project but after burning the blu ray, I have notice the vidoe coming close to one of the Pop-up Chapter will a small jump to the pop-up point. It happens to all of the Pop-Up chapter. Is there a way to m
-
I really like clusters, all through the program, right up to the end where I have to take the data out and write it to a delimited text file. The cluster to array conversion VI works great if your cluster has all of the same data type, but that makes