Apple TV and Marantz 7005 receiver
I cannot get my ATV to show up when trying to run it through my Marantz 7005 receiver. I've tried different HDMI slots but nothing is working. Can anyone help?
There is no such thing as a list of supported devices to connect the ATV to.
If the receiver has an HDMI input or Optical input, the ATV can send audio to it without the need for any adaptors.
Similar Messages
-
i am new to apple products and have just received notice that 2 updates are available. one for garageband and the other for iPhoto. it is my understanding that updates are free. why is credit card info requested for these two updates? help is appreciated. thanks, lloyd.
Have you gone through the process of accepting the iLife apps into your iTunes/Mac App Store account before updating the apps?
-
Hi,
I purchased some apple applications and already paid for this in my credit card, but I did not get receipt for it.
The purchase was on July 5, 2012.
How can I get the receipt for this purchase?
Thanks!Call the Apple Store and inquire. I believe I read that it can take several weeks for them to send the card, but I'm not certain. The store should be able to tell you.
Regards. -
Will a new apple tv work with this receiver for streaming itunes music from a macbook. The apple tv will be connected via hdmi to the receiver. The receiver hdmi out is connected to a flat screen tv. If I'm just streaming music, I shouldn't need to have the tv on, just the receiver, correct?
There is no such thing as a list of supported devices to connect the ATV to.
If the receiver has an HDMI input or Optical input, the ATV can send audio to it without the need for any adaptors. -
Apple tv and harman kardon receiver?
I just bought a new harman-kardon avr 247 receiver
Problem is that when I hook up the apple tv to the hk via component video, it will only display the apple tv while rebooting? Have the avr going to my tv via hdmi which does work fine with my directv component setup?
I also down sized the output from apple tv to 480i all the way to 1080i with same issue.
Any suggestions?
ThanksIf you have a component output then 480i should work. However, unless your TV has a 16:9 widescreen option all of the UI and videos will be distorted (people will look too tall and thin, etc.).
My rear-projection TV supports 480i, 480p, and 1080i and it allows me to manually select the aspect ratio (either 4:3 or 16:9). If I select 4:3 on either the 480i or 480p settings the Apple TV works but I have the distortion as I previously described. However, you might want to do some searches on the internet to find a workaround for this issue (special test modes on the Apple TV). -
Hey guys. So i recently downloaded ios7 for my iphone 4s and so did my mom. But my mom decided to update her phone as well using the same apple id. Now she is recieving all of my messages instead of me. Please let me know how I could fix this. Thank you.
Have your wife log in to her user account on the laptop. Launch iTunes, then connect her phone to the computer with the USB cable. Sync. That should put back all apps and media. Since you already upgraded her to iOS 5 she'll have to manually enter all her settings and preferences, and organize her home screens.
-
I recently bought this 27 " iMac used and he restored and whipped everything off of it. So i went to buy some stuff from apple store and it asked me to created apple id which i did. when i went to get the ilife items such as garage band iphot iMovie the button said accept. when i clicked it. it said the following ..
These apps were already assigned to another Apple ID, and they will be available in that Apple ID's Purchases list. If you don't have access to that Apple ID and want to receive future updates, you will need to purchase the applications.
Please let me know what to do to fix this issue and be able to purchase ilife 11 for this computerHi Lance ...
You can only re download the iLife apps using the same Apple ID they were purchased with.
See: Restoring iLife applications after Internet Restore of OS X Lion
here > Lion Recovery -
Ever since I uploaded i0s7 I haven't been able to receive I messages or face time. I have took it to the apple store and they couldn't figure it out. I have also followed the trouble shooting from I tunes and still can't get it working
Hi,
Strikes -
Go into compositionReady and have 3 variables you will be able to set them like this
strike1 = 0;
strike2 = 0;
strike3 = 0;
So on the wrong item click have
if(strike1 == 0) {
PLAY STRIKE1 ANIMATION
strike1 = 1;
else if(strike2 == 0) {
PLAY STRIKE2 ANIMATION
strike2 = 1;
else if(strike3 == 0) {
PLAY STRIKE2 ANIMATION
strike3 = 1;
So this will make it so when the wrong item is clicked each strike will be played in order.
Random Scrolling -
You should look into the Math.Random function to make things random in edge.
This is an example of the Random function. It will generate a random number up to 100.
var random = Math.floor (Math.random () * 100);
Lose Screen Score -
So we can create another variable in compositionReady for the lose score.
score = 0;
Now when the user gains a point to add to the score you could do this code on the click
score++;
which would add 1 to the score, However you can add however much you like to the score doing "score + 2" and so on.
To edit a text with the score at the end which I'm assuming you will want to do you will use .html
so $("Text").html("You score is " + score);
I hope this helps! -
I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.
Hello,
You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
http://support.apple.com/kb/HT1619
If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
Best of luck -
I recently changed my Email address which required me to change my username for my Apple ID and my password. The changed has been successful, but each time that I open my iPad, I get a message that I need to enter my Apple ID to continue to receive downloads. The problem is that the username that comes up for entry of the password is the OLD Apple ID username. I have entered the old password and then then I am directed that it is not correct and given advice to change my password or username. I can't figure out how to resolve this issue.
If you updated your existing account then try logging out of it on the iPad by tapping on the id in Settings > iTunes & App Stores and then log back in and see if that 'refreshes' the account on the iPad.
-
i have a long-existing iPhone 4s with one apple id and started a job where I received a macbook with another apple id. how do i get my phone to sync with the Mac Pro and secondly how do i get my music on there?
No not bothered about sycing apps etc it is all about calendars and maybe notes. IN terms of how its done I just want it the easiest way and preferably so that if an entry is made on one calendar then it populates the other.
Thgius is beacuse I have my work diary on outlok, which I then link with my ical. I want to make sure that information is then shared with her.
Chris -
My son and I both have iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself from finding out what he is up to during Freshers week!
You have to use a different Apple ID for your son.
Read this note:
iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
still valid for ios 7 -
I am being asked to verify my Apple ID. When I enter the password I get the message it is wrong. It says the e-mail address is already verified for another Apple ID and then it says it is sending an e-mail to my e-mail account that I then never receive. How do I resolve this?
This is most likely caused by an iCloud sign up (which forces you to use an email address as Apple ID).
Here's the workaround fix I found after some online research:
https://discussions.apple.com/thread/3656336 -
i have an older yamaha receiver and projector both without hdmi inputs but component video instead. I would like to get apple tv and start renting movies through iTunes but apple tv only supports hdmi and ive read that iTunes has codes to prevent the use ot analog cables with movies. Is there a way to adapt hdmi to component video for both apple tv and iTunes easily?
Yes, HDMI is the only supported method. Also, with converters you will run into issues with HDCP (which will prevent you from streaming DRM content from iTunes etc) as well as resolution.
-
I have 3 mail accounts in apple mail. One of them has had the spinning ball going for several days and I cannot receive mail in this account or delete messages etc. For some reason, I CAN send mail on Apple mail using this account, although it takes several minutes. I can receive mail in this account on my iPad and by signing into aol on safari and internet explorer on my office PC. It's obviously a glitch in Apple's Mail. I've deleted this account and reopened it in Mail on my Mac Pro with no difference. Any suggestions would be greatly appreciated, this E amil account is major to my business.
http://support.apple.com/kb/TS3276
sounds like a corrupt database or index
the glitch is your home folder and mail folder, esp look at syncservices
I'd post in the mail or Lion forum where you will find similar issues being discussed.
http://www.apple.com/support/mail
Maybe you are looking for
-
Adobe Media Encoder CS4 will not convert .mov video
Hello, I have Adobe Media Encoder CS4 installed on my computer and I'm trying to convert a .mov video into a format that can be edited on windows movie maker and when I convert the video it converts the audio just fine, but there is only a black scre
-
Mac OS 10.9 Download Error
I have Adobe Reader 11.0.06 running on Mac OS 10.9.1. When ever I download a .pdf from the web or my email I get the error message "could not open 'x.pdf' because it is either not a supported file type or because the file has been damaged". Help
-
Desktop Manager doesn't run on Vista?
Hi, Desktop Manager can't run on my Vista. Each time I clicked it, it just flashes with a screen then closes it. Nothing is running. what might be the problem? thanks, steven
-
Pattern Matching for a wildcard Ip address
I m working on a project. And in it i get problem for pattern matching.I have ipv4 ip address for ex " 127.3.0.1* ".I have to generate regular exp for pattern matching in Java.Can you guide me what can be its regular exp. thanks, preeti
-
Hi, I did not received password reminder to my mail [e-mail removed for privacy and security]. I checked spam pholder and trash on my mail. Can you help me ? My correct account on skype is registered for this adress [e-mail removed for privacy and s