Apple TV and Monthly Limit?
hello all.
i have a quick question about apple tv. ive searched through the forums but cant find an answer so here goes.
When i stream a film from my iphone to the apple tv will this count towards my monthly download limit? I know if i were to rent a film off of itunes this would count towards the limit. Surely though because the phone and apple tv are on the same local network this would not count???
thanks Chappers
chappers wrote:
hello all.
i have a quick question about apple tv. ive searched through the forums but cant find an answer so here goes.
When i stream a film from my iphone to the apple tv will this count towards my monthly download limit? I know if i were to rent a film off of itunes this would count towards the limit. Surely though because the phone and apple tv are on the same local network this would not count???
thanks Chappers
Hi. Welcome to the forums.
If I may, just for a bit of extra detail - the usage figure is for both uploads and downloads from the internet (not internal network traffic). There are a few exceptions, BTFon, Digital Vault, BTVision and BBTalk.
You've not mentioned your package type, hence there may actually be no "limit" as such for a set monthly payment.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures
Similar Messages
-
I bought a iphone 4 a few months ago, used from a store .. i had to currently restore and update my phone today due to it saying connect to itunes it wouldnt do anything else so i did other wise, now my phone turns on but wont go past the apple id and the orginal owner still had there apple account in the phone and its asking for that account to actiavte the phone again and not mine , im stuck and dont no what to do i just want my phone to turn on again
please help !
thanks !!!You have encounter Activation Lock, the antitheft feature of the iPhone. The previous owner did not remove the phone from their account. The phone cannot be used until they do. Return to the store and let them sort this out. It is very unusual for someone to "forget" to disable activation lock, as it is necessary to do so to erase personal information on the phone. So it is quite likely you bought a stolen phone.
-
I have a mac book pro with retina,I haven't turned it on in a couple of months.no problems then, now when I try to turn it on i only get apple logo and progress bar. After a few mins the laptop just turns off and nothing eles.any help would be appreciated thanks
I linked to it above, but here is another link.
http://support.apple.com/en-us/HT201262 -
I just dropped my new macbook pro on the ground, it dents a little. So can I bring it to apple store, and repair it for free? BTW: I bought it just one month ago. Thank you very much
No, user caused accidents are not warranty coverage, nor are spills, loss, theft etc.
all these user caused issues have no bearing on the warranty coverage.
they are outside of same.
All laptop mfg. are identical in this nature (same with your car too of course) -
I have purchased an app and then I decided to delete it...but still apple is charging monthly...how can I get rid of this...
It sounds as if you purchased the app, but you also purchased some subscription within the app. You say "Apple is charging monthly", but it's probably the app writer that is charging you monthly for some subscription you purchased within the app. Contact the app vendor and tell them you want to stop the subscription.
-
Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
If i were to apply today for special financing online would i be able to go the same day that i applied online to a apple retail store and purchase an apple imac and have zero interst for 18 months
Where did you find that offer? You have to assess the offer and see how it applies to your circumstances. If zero interest is offered then you have to respond to that particular offer.
We cannot advise you about that, I'm afraid. -
Any way to determine which app is causing a spike in my data usage, I've gone over my monthly limit?
In 2 separate 2 hour periods, my phone went through 500MB of data each period - pushing me close to my monthly limit on Verizon. I turned off Cellular Data completely, and have been trying to figure out what app is doing it. It seems to be something that happens quite suddenly, as I've noticed that the phone gets really hot. And no, I'm not streaming video, I don't have iTunes match, or any of those obvious issues.
So, I've downloaded Dataman, My Data Manager, and Onavo, but unfortunately, none of them allow you to see which apps are doing the data hogging. My Data Manager does allow me to see data usage on WiFi (the other 2 don't, assuming that all you care about is cellular data)....and it at least confirmed for me what I thought.....After a day of minimal data use, I suddenly had a spike of almost 20GB of data use in 1 hour. Yes, you heard it 20GB!!!! It's as if my entire iTunes music library was being downloaded (and no I don't have iTunes wifi sync enabled, and besides, I had just previously synced via USB, so there was nothing new to sync).
My guess is this is related to this:
http://www.guardian.co.uk/technology/2012/oct/17/iphone-5-iphone
Apple needs to figure this out -- Verizone needs to compensate all of us --
But in the meantime, does anyone have any ideas on how to figure out what apps/services are using the data?GV2,
I'm glad Mrhelper was able to shed some light on this for you! In iPhones, the amount of data you're seeing under each app is for the "Current Period." Just above that list you'll see info about the Current Period and Current Period Roaming. This is just an overall snapshot of total data usage for that period of time. The Current Period does not reset on its own, so it will be counting everything from the last time you reset it through now. You can reset it by scrolling to the bottom and tapping on "Reset Statistics."
So, for example, if you reset your statistics 3 days ago and then there's 1GB used under App Store you'll know that over the last 3 days 1 GB of data has been used for the App Store.
SarahO_VZW
Follow us on Twitter @VZWSupport -
Twice in the last month someone has been logging in to my apple account. I have changed the password but it doesnt seem to help. I wrecked my old iphone and now have a non apple phone and would like to eliminate my apple account. How do I do this?
cathorio wrote:
I recently changed my lap top. My problem is the new lap top won't accept my apple I D it asked me to sing up for a new one which I did.
I am puzzled by this. The laptop doesn't need the Apple ID - but iTunes does. I could be missing something but ....
Why would you not be able to use your existing Apple ID and iTunes account on a new laptop? If you authorized the computer - you should be able to use your existing account - unless you already had 5 computers authorized with the existing ID - and that was why iTunes would not accept the ID. However, I'm sure that you would have received a popup message from iTunes telling you that you had reached the limit.
I just received a new MBP and my daughter did as well. My entire family shares an Apple ID and we had no issues at all with my Apple ID and iTunes on our new computers and I did not have to sign up for a new account. Did you even try the old ID? -
When i turn on my macbook a box appears telling me i need to restart my computer (in different languages) and in order to do so i have to press on the off button for a lil while. Even after doing this the same box appears and it never restarts correctly. This box appears every single time. I rarely turn my computer off. I just place it on sleep mode and restarts it only when i get prompted to. I brought it to genius and they couldnt figure out what the problem is so i was told it needed to be shipped to get fixed. I didnt have anything backed up. All i want saved are the pictures because i went to 2 events where i was the assigned photographer and i didnt get to save it to an external memory. Genius said that when shipped i cant give instructions like make sure to save the pictures and if they are unable to, call me if they should go on with the process. I was wishful thinking that to fix the problem they might not even have to touch the pictures memory part. I brought my MBP back home hoping it will miraculously starts and id be able to back it up but now all it does when i turn it on is the screen remains gray with the apple symbol and the circle timer below. The screen stays this way even if i leave it on for hours. Please help me fix this!!! cant i really specify to the technicians at apple to please make sure not to erase the pictures? Is there no other way to turn on my mac? I only need it to work ones.
There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit -
I left it running over night, it was running perfectly, in the morning the screen was black. i tried to restart it and got no display but i can hear the machine running. so i put away for several months, plug it in, charge the battery, it boots, i have a display, it loads the desktop and freezes. when i try to restart it theres no display. the last time i tried, i started it, i got to the apple screen and nothing. whats the issue here? please help.
Will it boot OK in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
Cheers, Tom -
I bought my iMac from someone. Everything was changed over to my name however when I try to update programs it only shows the old users apple ID and I can't update. How do I change this so I can update the applications and have everything fully under me?
The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
3. Other issues
If you see a lock screen when trying to boot from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another authorized service provider to be unlocked. You may be asked for proof of ownership.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. -
I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?
Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
OS X 10.7 or later was installed by the previous owner
The startup volume was encrypted with FileVault
You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like. -
My experience with Apple TV and HDMI/HDCP issues
I am convinced that it is the software update to 4.2.2 from 4.2.1 that is causing this issue. All forms of applications only worked once for me and then it reverted back to HDCP issues. I read several postings everywhere including plenty at Apple's forum and AVS where people were very frustrated with this HDCP issues. Anyways, here is what I did before taking it back to Apple store....I bought AUVIO high speed cables from Radio Shack which is rated very high and tried that and I still got HDCP issues when using NetFlix or AirPlay from iPad. Youtube from Apple TV always worked well without HDCP complaints.
I packed everything back and took it to Apple Store (you can return without re-stocking fee up to 14 days from the day of purchase). After 14 days, you cannot even return it and you can ONLY fix it. I waited for a Technician. They heard my complaints but didn't refute any of it (possibly because they have had numerous complaints on this product). It took 5 minutes inside for them to test and see similar issues with the box that I had. So, they have swapped it for a new box. Before I left the store, I checked the settings including software version and Audio/Video settings in the Apple TV that is connected at the store. I found three main differences none of which the Apple customer service staff agreed could be the reason for my problems (surprise!!)
1. The software update from the shelf and the one they were using was NOT updated to 4.2.2 (it was still running 4.2.1)
2. Because of the software update, the Audio/Video setting for HDMI had the options to toggle between Auto, RGBy, RGBhi & RGBlo bandwidth. I believe this was in place to make the HDMI interface output as component with higher or lower bandwidth but the newer update will ONLY give you the Auto option (!!!)
3. They had this directly Ethernet wired and not through Wireless network and were recieving the all the full bar strength signals. On the box that I returned, eventhough I have 18 Mbps speed at the house (any given time of the day), the Network speed test was taking a long time. Moreover, after the Apple TV network test, it doesn't spit out the outcome of the tests (a BIG bummer and useless for testing).
Anyways, I took the new box and hooked it up directly to my SONY BRAVIA XBR3 TV to one of the HDMI ports, disabled the feature to send or recieve data to Apple directly and did NOT update the software. It worked fine and have tested all of the options. From what I have read so far (I have only spent 30 hours of my weekend on this when Apple product hookups are supposed to take 5 minutes ONLY), there is NO guarantee that it will work continuously as people have had things work on them for 6 months and then suddenly have the HDCP issues.
Will wait to see....if it continues to work....I figured it out. Had to go to general settings on the main screen and restart. Synch of audio is much better.
-
My I pad broke after only a few months and now they won't mend it as they say they can't get in as my i cloud password not working. I never even set one up? I have an apple id and password but that's not enough for them to get in.
Welcome to the Apple community.
It's your Apple ID and password they want.
Maybe you are looking for
-
Preparing for iOS 6: Maps bookmarks and YouTube favorites
I am excited about the upcoming iOS 6, however, I have some reservations about my backup data: Now that Maps is getting a complete overhaul, I'm wondering if my bookmarks will be lost. Does anyone know if the bookmarks will still be there? Can anyone
-
ADC/DAC 14Bit to 16Bit conversion
Hi, I am trying to understand how the signals are affected by the ADC and DAC, respectively, of the NI5641R. From the datasheets I know that both the ADC and the DAC support a 14Bit conversion. Now, from the ADC I receive 2 (I and Q) I16 values, so I
-
Intercept delete action in DataAction
Hi, I use jdev10g preview. I put in uix page a sample read-only table. I put delete action from my AM. I want commit after delete, but how known that's delete action is fired in DataAction ?
-
Just updated my iPad 2 to OS7 and now I can't connect it to iTunes 10 on my MacBook OS 10.5.8 My MacBook is too old and can't be updated to Mountain Lion as it is early 2008 white MacBook. It all worked perfectly prior to updating the iPad 2 to OS7.
-
My iPhone 5 was working perfectly. It was even charging when I put it on charge at first. suddenly It stoped charging after 5 minutes. I was confused and went to the apple store. those people told me that there's a lequid damage on my iPhone and I wo