Apple TV as computer display?

I want to show my computer screen on a 46" 1080p display while others watch me work with mapping programs to plan trips. I put a marker on the map on my computer, it shows on the 46". I think Apple TV cannot do this because what I am showing does not go through iTunes.
As a work around, it possible to post maps to iDisk in Mobileme and use Apple TV to show them? (Panasonic plasma TV)

Thanks for a prompt, clear answer. It's time for more cables and adaptors!
My interest is more in displaying content generated in our home rather than externally downloaded. I was hoping the device might replace wires and adaptors and allow three computers to wirelessly display any local based computer content. It seems Apple TV can handle the iPhoto library in one machine at a time but does not retain computer settings to allow for easy toggling between two or more computers.

Similar Messages

  • HT1199 my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

    my computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. sometimes it refuses to shut down . this issues started after installing OS lion. what do i do?

    I don't think it's exactly an incomplete installation brody, but most likely in-correct permissions somewhere along the line that either happened, or became magnified during the upgrade. Also, it could be corruption as well.
    First thing to do, is boot up holding down Shift key to do a safe-boot so we an clean up any corrupted OS caches, after that do another reboot, but go to the Lion recovery, and scan the HD for errors, repair any if you find them, and then try to do a Repair Permissions job.
    That should fix the issue, if not, we can start doing a PRAM reset  and SMC for good measure.

  • If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?

    If I have 2 tv's and each their own apple tv can I display the same program to them from my macbook at the same time?
    for instance Keynote?

    Welcome to the Apple community.
    The Apple TV cannot display keynote presentations or websites from the computer. It can display them via mirroring from the iPad 2 or better or the iPhone 4S.
    You cannot AirPlay to 2 Apple TV 2's at the same time from an iOS device. You can watch the same video, TV show or listen to the same music from your iTunes library on multiple Apple TV's at the same time.

  • Out of Frequency Problem with Apple Multiple Scan 720 Display and Mac mini

    If a resolution with a horizontal and/or vertical frequency not compatible with your display, in this case an Apple Multiple Scan 720 Display, is selected in the Display preference pane of the Mac OS X 10.4.10 system running on a Mac mini (Early '06), you will recieve a message on your screen about being "out of frequency" and the power management feature will shut down and restart your display repeatedly. The following solution should restore your display to proper function. It may apply to other displays and Macintoshes running Mac OS X, but it has only been tested specially on this setup.
    1. Shut down the Mac mini with the power button (press and hold for 5 seconds)
    2. Start the computer up with the Mac mini Mac OS X Install Disc 1 (press the power button, insert the disc, hold the C key down until the progress bar starts up)
    3. Click on the language, then select Utilities > Terminal...
    4. Type "cd /" and return
    5. Type "cd Volumes" and return
    6. Type "cd your hard drive name" and return (you need to enclose the hard drive name in double quotes if more than one word)
    7. Type "cd Library" and return
    8. Type "cd Preferences" and return
    9. Type "rm com.apple.windowserver.plist" and return
    10. Type "exit" and return
    11. Quit Terminal
    12. Select Utilities > Startup Disc...
    13. Select the OS on the hard drive and click on Restart button, holding down the Shift key until the progress bar starts.
    14. Log in to the account that had the display problem in Safe Boot mode
    15. In System Preferences select Display, select a resolution with the appropriate frequency, 60 Hz should be fine, then close System Preferences
    16. Restart the computer, log in to the account normally, and the display should be functioning properly.
    DO NOT SELECT AN INAPPROPRIATE RESOLUTION/FREQUENCY FOR YOUR DISPLAY IN THE DISPLAY PREFERENCE PANE! BE AFRAID, BE VERY AFRAID!
    Mac mini (Early '06)   Mac OS X (10.4.10)   Apple Multiple Scan 720 Display
    Mac mini (Early '06)   Mac OS X (10.4.10)   Apple Multiple Scan 720 Display

    Just a correction and an elaboration:
    It should be Startup Disk... with a k, not a c.
    Both the resolution and the frequency must be appropriate for your display to work properly. Check your documentation or the manual information available on your display for the appropriate resolutions/frequencies. Evidently the Apple Multiple Scan 720 Display is considered so old that no allowance was made for it in the Display preference pane of Mac OS X 10.4.10.
    Mac mini (Early '06)   Mac OS X (10.4.10)  

  • Extension cable for Apple 24" LED Cinema Display

    Purchased the newly refreshed Mac Pro (Intel Xeon “Nehalem” processor) and an Apple 24" LED Cinema Display. (The new graphics cards support the mini displayport.) They work well together and I am happy with the results.
    There is a snag. The cable on the monitor is too short to reach my computer, which needs to go under the desk. The cable on the display is hard wired. I would prefer not to drill a new hole in the desk if I can avoid it.
    The obvious solution would be an extender cable. I find a number of cables that support the displayport standard, but all are M to M. In fact, Belkin notes that their cables are NOT for Apple's mini displayport. The Apple store has nothing on its site, call to the Apple store yielded no solution, and I live four hours from the nearest Apple store. Apple after moving to standard solutions appears to have gone back to a proprietary one again.
    I cannot be the only one having this problem. Anybody found a way to extend this cable?

    It is around two feet long. I would not have a problem with this if I could extend it or Apple had adopted the standard cable with female connector on the display so I could purchase a longer cable. Apple has a long history of slipping into proprietary solutions that are often good (e.g., magsafe on MacBook) but tend to cramp ones ability to come up with solutions they have not thought of.
    There are a growing number of m-m cables that would work from various vendors like Belkin, but I have found no extenders from Apple or any other vendor.
    As to the monitor itself, I LOVE it. I am sure there will be a solution eventually. I have the new Mac Pro and monitor on the kitchen counter. Not sure how long my wife's patience will last.

  • HT4623 I cannot login to my Apple ID on my phone after the update, although I can login to Apple on my computer. What do I do to get my phone back to operational? Please help!

    I have updated my I phone 4S and need to login to in to be able to use my phone. I am able to access and log in to Apple on the computer with my password and username although not able to do this on my phone. It keeps saying invalid user name or password. Please help me so I can use my phone. Thanks in advance for any and all assistance.

    Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Although Apple has not provided any indication on the cloud status page.
    Do not change your settings.

  • I cannot access my computer library on apple tv .. Although I can stream music .... No pics at all ... It used to My computer has iTunes open I am pretty sure it is on same network as apple tv  My computer will stream music on iTunes from my computer but

    My computer has iTunes open
    I am pretty sure it is on same network as apple tv
    My computer will stream music on iTunes from my computer but not 
    show owners library and not any pictures
    In apple tv settings - AirPlay is on and so is home sharing
    In my computer iTunes - home sharing is on

    I get this  problem every day or two when trying to connect my ATV 2 running 5.1.1 to iTunes 11.0.1 on an iMac running OS X 10.8.2 (though it started happening with earlier releases of both ATV software and iTunes. I think it started happening regularly following the installation of the ATV 5.0 software, with I think iTunes 10.6 or thereabouts.) They're connected over WiFi via an Airport Extreme basestation.
    The TV simply shows a black screen with:
    'Could not connect to "<iTunes library name>"'. 'Make sure the computer is on the same network as your Apple TV , the iTunes version is up to date, and iTunes is running.'
    I've found the way to fix this problem when it happens is to restart the Apple TV (Settings>General>Restart). This always seems to correct it and allows me to connect to iTunes successfully once again, but the problem always returns sooner or later and I've not been able to determine what triggers it exactly. It  seems to happen more often if the iMac running iTunes has been put to sleep with iTunes running and subsequently woken, but it also happens sometimes when I wake ATV and try to connect it to a freshly booted iMac and newly launched iTunes.
    I keep hoping a new release of ATV software will fix it but neither 5.1 nor 5.1.1  made any noticable difference and neither have newer releases of iTunes.

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • Should i be able to see interlacing on the computer display?

    I'm trying to verify if i have things set up properly.
    If i'm working in a timeline that is DV NTSC and i've brought in elements from after effects and as well have moving images within FCP, should i be able to see the interlaced lines in FCP?
    It looks okay on the broadcast monitor but i'm trying to figure out if interlacing on ftg/renders should be visible on the cinema display.
    a simple yes, no and a sentence if you've got the time would be nice.
    thanks

    You can observe the presence of interlacing on a computer display only if the Canvas (or Viewer) are set to display 100% size and the video is paused. The interlacing will appear as a comb effect on moving objects. You can not observe interlacing with a computer display on running video.

  • Apple LED 24" Cinema Display audio problem under 10.6.8 (with post fix)

    Hi all,
    I'm using an Apple LED 24" Cinema Display with a 2010 MBP 15" and had been using 10.6.8 without problem. After installing the post-fix I now get static noice on (clipping?) when music contains lots of base. If I switch the output to my MBP's built-in speakers then the audio is fine.
    Is there any way to un-install the 10.6.8 post-fix?
    Thanks,
    Yanik

    Solved the issue. This issue coming up after installing the 10.6.8 supplemental update was just a considence. I ended up tracing the issue back to my Atlona AT-MDP21 Mini-DisplayPort KVM switch and after fiddling with cables the issue went away.

  • Using the 27" Thunderbolt and Apple 24" Cinema LED displays

    I hope everything is having a good weekend.  I have been trying to find an answer and no avail I am not able to find any solid answer.
    Setup:
    2011 MacBook Pro 15" (MacBookPro8,2 model)
    27" Apple Thunderbolt Display
    Additional Equipment:
    Apple 30" Cinema HD Display
    Apple 24" LED Cinema Display
    Ideally I would like to have all three monitors connected this macbook pro, but I know it may be hard.  At the minimum though I would setting for the 27" and 24" to be the two monitors.  Some time ago, I saw a web posting and a podcast talk about some entity achieving this feat, but it require the Pegasus RAID system.  I have noticed that I cannot directly connect the 24" to the 27" as the result is the 24" has a black screen and the MacBook Pro does not recognize the 24".
    Now I have seen products which offer the monitors to be connected using some third party peripherels:
    Newer Technology USB to DVI/HTML/VGA display adapter (which uses display link)
    Mini Display Port | Thunderbolt +USB to Dual-Link DVI Adapter
    Unfortunately the results would mean that my Thunderbolt will not be useful after I connect the 24" since it will not allow any more thunderbolt connections.  That is acceptable, but I will like to hear from anyone who is willing to share their experience.  I cannot find the link to a solution which allow the 24" to be connected to the MacBook Pro thru USB device (siimlar to the display link device).

    It appears that a Thunderbolt accessory: "seagate goflex thunderbolt adapter" solves the problem.   Having the seagate device between the two monitors allows the 24" Apple LED Cinema Display to start working.  The solution may not be right for everyone as the adapter is about $179.99 on Amazon.

  • How do i sell a macbook using Apple's refurbished computer program.

    I have an intel core duo MacBook with 2GB of ram and a 120GB hard drive. (it also has a superdrive).
    How do I sell this on Apple's refurbished computer program and how much do you think that I would get for this computer.
    Thanks.
    MACBOOK   Mac OS X (10.4.7)  

    I've sold one Macbook and two minis on ebay with no problem. I always use Paypal and only ship to a Paypal verified address. On each sale I got just about what I paid for the macs minus Paypals cut. Selling to a live person for cash may sound good but you're letting someone know you have an expensive laptop at your home and that might bring the wrong person. I have sold on eBay for several years (feedback 300+) and have never been scammed. People try of course, you always get the emails asking where you are and can they come by. Or you get the offer to buy your laptop for $500 more than it's worth IF you send them the laptop via their fedex account and they pay on receipt. NOT! If you sell on eBay use Paypal and ship to verified address sellers are covered too for problems with sales. Good luck in selling your Mac you should get a good price.
    MacBook, C2.0 duo, black   Mac OS X (10.4.7)   120 gb hd, 2 gb ram, 250 gb ext drive, 5g ipod, 2g ipod

  • Connect apple tv to computer speakers.

    Hello,
    What can I use to connect the apple tv to computer speakers? I know it has digital output but speakers only have 3.5 m jack input.
    Is there any cable that will make this possible?

    See https://discussions.apple.com/message/18084600#18084600. In other words, the answer appears to be no unless you're willing to live with some serious compromises.

  • HT1620 Is my apple iPad with retina display secure

    Does my Apple iPad with Retina Display need Internet Security

    Do you want to use good practices?  Sure.  Don't splatter your password all over, use WPA or WPA2 networking, don't leave your iOS device unlocked, set up Find My iPhone, understand what makes a bad password and don't choose them, keep backups either in iCloud or on your Mac or Windows box, etc.
    Do you need added iOS software — which does not exist for iOS, and would likely not even be allowed into the App Store for sale given what the anti-malware tools inherently have to do — on your iPad?    Nope.

  • HT5467 Does the Apple iPad with Retina Display MD513LL/A have internal GPS?

    Just wondering if my Apple iPad with Retina Display MD513LL/A contains GPS chip or if I need to purchase an external GPS?
    Thanks for any help!
    J

    No, the WiFi model does not have a GPS.

Maybe you are looking for

  • Error while deploying planning application : The application app1_ENABLE_FOR_OFFLINE is invalid

    hello, i am trying to deploy EPMA planning application. i was successfully able to validate app1 application. but not able to deploy it. in status it show aborted as status & progress as 100% when i checked log it shows as follow, [Jul 26, 2013 11:10

  • BPM Question on Acknowledgment use

    Hi all,    I have a problem in this scenario:    IDOC--> XI --> BPM (Send message with Acknowledgment to Jdbc Adapter) ---> Update SQL Database. The process start correctly but when it arrive to Send Step the update database work fine but the process

  • Globally map Ctrl   B and ctrl   F to left and right arrow keys, respectively

    Does anyone know how I would *globally* map Ctrl + B and ctrl + F to left and right arrow keys, respectively? This keystroke works for some applications, but not all. I'd like it to always work.

  • Position for Programmer experience with DAQ and C++/Labview

    We are company located in the Bay Area of California and looking for a programmer experienced with programming (from scratch) DAQ boards for signal generation (sine/triangle/sawtooth) waveforms as well as DAQ digitizers, FFT, and data displaying. You

  • Sound pasue and mute

    i'm trying to pause and/or mute a sound, with little success. i've found out that something like 'sound.play(pausePosition)' might fail on sound-clips with low sampling-rate. however when i try to mute a sound with a 48000Khz sampling rate it simply