Apple TV...audio, but no video
I have been not been successful in being able to watch anything from my I-pad onto the TV. I can get audio, but no video. Any suggestions on what I may be missing in the set up??? Any help would be MUCH appreciated!
H anyone I have the same issue several times. Only on the left bottom tv corner the Film title is shown.
Similar Messages
-
i am trying to display the output from my ipod touch on apple tv. i can get the audio but no video. Thank you for any advice.
What output are you trying to get to your tv?
-
having difficulty - via airplay --w/ streaming sites from ipad2 to g2 apple tv -- get audio but not video -- what gives???
What site are you trying to watch? I just tested 3. The you tube app streams from the pad to apple tv fine, as long as the source video format is ok. Checked a site called funny or die.com. Most of the videosmthere stream to apple tv fine. A few have a different format, and do audio only. Netflix does not stream at all, but you can get to netflix directly from apple tv. Whether or not it streams is directly related to the format of the video. Some do, some dont.
-
Audio but no video on Apple TV
On many tv and movie apps, i.e. amazon, get audio but no video on AirPlay with Apple TV
some apps can block airplay mirror if the app maker wish it so
-
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package. -
HT4211 apple tv sound but no video
I have audio but no video on my apple tv. I can see "now playing" listed in the music category, and can hear the audio but cannot see the video. any advise what setting or problem causes this?
If you are using Airplay to send something to AppleTV, many iOS apps only transmit sound due to restrictions.
Alternatively are you not seeing anything on teh TV (menus etc) with AppleTV connected?
AC -
Audio but no video on .mov files
I'm trying to watch a tutorial disc (working with Ableton Live). The video files are .mov, the disc comes with the install for Quicktime 7.03. I have Quicktime Pro 7.12. When I try to play the video files, I get audio but no video.
When I try to play the files in VLC Player, I get video but an audio error (and no audio)...
Anyone familiar with this issue (I've searched the forums and found similar issues, but nothing the same as this...)?Nothing about Sorenson 3 (video track) AAC (audio) or Apple BMP (image format layer) that would keep the file from playing on your machine.
Do you open these .mov files directly from the CD (double click) or is there some app that is used from the CD to play them?
Try a double click and test the files while logged in under a different user account. -
My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.
here is fix! i tried only step 1 and then restarted my computer and now it works. Choose remove All Files
Hope it helps.
https://discussions.apple.com/thread/5952624?tstart=0 -
IMac only mirroring audio but no video
iMac only mirroring audio but no video, and I get no Airplay button in the bar.
I can also not select Apple TV in the System Preferences.
Anybody?I have read of others having had this button dissapear. Apparently if you totally shut the pad down and reboot it will then reappear.
Hope that helps -
HT204291 Plays audio but no video sometimes
Can someone help with my apple tv 2 playing audio but no video sometimes. The icon comes up in the bottom corner the same as when I play a song and the video does not come on once Ina while.
paulfromrivercity wrote:
Is that because AirPlay will not do streaming videos, just ones already loaded on the device?
It's as clear as mud but the explanation is here. My interpretation is that it's a licensing issue.
AirPlay DOES do streaming videos. Crackle is one example. Netflix is another but, in the case of Netflix, there is no need for an iPad/iPod. -
I get audio but no video unless I play the file from UTube
I get audio but no video unless I play the file from UTube
Use a different browser?
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.
Even if it's just to redownload the driver. I recommend another browser. -
Blu Ray Burned in Encore CS4 play audio but no video
I've burned this project multiple times and everytime I get the menus and the audio, but no video when played on a Blu Ray player. The same disc plays fine in computer/laptop. And when I tried a shorter version of the project (10 minutes vs. an hour and a half for the original) it plays fine everywhere. Could the file size be causing my disc not to play in a BD-R player? Then why would it play on a computer/laptop?
More information needed for someone to help
http://forums.adobe.com/thread/416679
Some specific information that is needed...
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0 -
Youtube videos wont show I hear audio but no video
I enherated this iMac I recently updated the software now videos wont show on youtube or on hulu I hear the audio but no video.
You probably need to update Flash Player.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
* Unhelpfully, if you want the last version for PPC Macs, you need to go here: http://kb2.adobe.com/cps/142/tn_14266.html and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here: http://kb2.adobe.com/cps/838/cpsid_83808.html
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
I have an Ipad 2 and I am trying to use the a new component av cable I bought to play hulu on my tv from the iPad 2. I get audio but no video. Can any help?
willyinpr wrote:
...Here you can see "TV OUT", where it says "widescreen" make sure is ON.
I have my iPad Video set to "widescreen", but it didn't make a difference when I briefly tried it with a HDMI connection from my iPad2 to my Samsung TV. The video was letterboxed as was the iPad homepage when it was displayed on my big TV.
I didn't try a streaming video so I don't know if that would be letterboxed or not. I do have a movie on my iPad and I'll give it a try (perhaps tomorrow). If it isn't letterboxed, I'll post it here.
Overall (at least via HDMI), I was very unimpressed with the process. The picture seemed washed out and the resolution certainly suffered. I don't remember what my test video was, but the results were what one would expect with a SD signal. At this moment I don't see any serious usage of this process for me. -
Flash player 11.6.602.180 plays audio but not video...
Very similar to problems reported by others. Just started recently... flash player on Win 7 and IE 10 plays audio but no video... just black box or blank.
Have reinstalled flash player several times... including following all clean install instructions several times. Installation completes and and tells me it's installed successfully.
Have carefully matched IE settings to allow activeX content and have enabled the flash player object and turned on active scripting for all zones, etc. Still no video.
Going to the flash verification page shows a blank box where the current installed version should be.
If I look in control panel under Flash Player it tells me the activeX version is 11.6.602.180 and that the plug in is "Not Installed"... could that be the problem?
What can I do to fix this? Thanks in advance for any help.What is your display adapter, device driver version and date? See http://forums.adobe.com/thread/945765
Maybe you are looking for
-
Help! - WLS 6.1 / MySQL / ConnectionPool not shrinking!
Hi, We allowed for a maximum 80 connections (way more than we need) with an initial capacity of 25 and increment of 1. We set the pool to shrink every 5 minutes, but the pool doesn't shrink! Eventually a ResourceException (No resources available) is
-
Can't approve iMac for Keychain
I have been using Keychain on a MacBook Air . Now I have installed OSX Mavericks on my iMac (mid-2009) and want to use Keychain on it. I don't have a security code so I am trying to set it up by requesting approval from the MBA. The request goes from
-
Joining three tables through link tables
I have three separate tables that are related to each other through two link tables. Employees have a many to many relationship with Programs (1 link table) Employee + Programs have a many to many relationship with Attributes (The employee attributes
-
Hide The Store/Purchased option
Hi. I use a virtual DJ package which shows my itunes playlists. It also shows itunes store and purchased playlist. Can i hide this so it doesnt show in my DJ software, cluttering the column up? Thanks, Ben
-
Looking for datafile creation date
DB version: 11.2 / Solaris 10 We use OMF for our datafiles stored in ASM. I was asked to create a 20gb tablespace. We don't create datafiles above 10g. So, I did this. CREATE TABLESPACE FMT_DATA_UAT DATAFILE '+DATA' SIZE 10g AUTOEXTEND Off EXTENT MAN