Apple TV breaks my Airport Express wifi network

Hi,
I have an Apple TV, Airport Express (mode = "Participate in a WDS network") and Airport Exreme (mode = "create network") and iMac all connected to router/hub via Enternet. Whenever I used my Apple TV, my iPhone and iPad can no longer connect to the wifi network (they keep asking for the password, but 'are unable to connect' even when the password is re-entered). Powering the Airport Express off and on fixes the problem (until next time the Apple TV is used).  Any ideas on how to fix this?
Thanks
Luke

Participate in a WDS network would not be the correct setting for the AirPort Express because this type of setting is only used when the AirPort Express is connecting using wireless. You are connecting using Ethernet.
Suggest that you change the AirPort Express to "create a wireless network" using the same wireless network name, security setting and password as the AirPort Extreme....and be sure to configure it in Bridge Mode as the final step before you Update the settings for the device.
This will provide one large "roaming" network.

Similar Messages

  • Airport Express WiFi network MAC address filtering not working

    I have an Airport Express WiFi network which I bought and installed new in 2011. Initially I enabled MAC address access control and populated a list. It was working perfectly, I know, because a niece visiting tried to connect her iPhone and could not until  I added its MAC address to the allowed list. Now however, anyone can connect without being added to the list. I think I read somewhere that a recent firmware update permanently disabled MAC filtering in Airport Express, even when it was previously working? Can anyone enlighten me about what's going on here?

    In a sense those are/were/should operate as two separate functions, which they did before recently.
    They do operate as two separate functions.....but it all depends on how you have the default rule setup in Timed Access.
    If the default rule in Timed Access is set to No Access.......then a wireless device cannot connect....even it has the password for the network.....unless it has been setup on the list of allowed devices in Timed Access.
    I have checked this 3 times this evening to verify. It works as it always has, and as expected.
    If the default rule in Timed Access is set to Unlimited, then any device can connect to the network if it has the password. Devices that are listed or specified in Timed Access will be allowed to connect at the specific times that have been set up for each device.
    So, if you want to use the more traditional MAC Access Control settings, the default rule has to be set to No Access and then you must set up a rule for each device that you want to allow to connect to the network. Only devices on the Timed Access list will be allowed to connect to the network. Other devices will not be able to connect to the network....even if they have the correct password.
    If a recent firmware update has changed things from what they have always been.....then I am not affected....and I should be if I am using the same firmware as others.

  • Unable to register to Airport Express wifi network

    I have a Time capsule, and I'm using a AirPort Express to extend the network. The setup is pretty straightforward, and it has been working.
    However quite often my devices (2 iPhones 5s; iPad 2; and event a MacBook) often lose the connection to the wifi when using the Airport Express (too far from the Airport Extreme Time Capsule signal). Opening the wifi menu, the devices detect the network, try to join... But seem not to actually be able to register. No error message appears do, just the circling wheel keeps runing.
    All the devices firmware and iOS are updated. Can't figure out what's wrong. Could it be the fact that the Airport Expresss and the Airport Extreme were originally bought in different countries?
    Thanks in advance for the support.

    Hi Brett,
    Thanks for the reply. But the issue is not with the iOS devices. I experience the same problem with the MacBook.
    The issue seems to be with the Airport Express that somehow loses the connection to the Time Capsule. Usually if I restart the issue tends to resolve it self. But I endup doing this on a regular basis...
    Any ideas?

  • I use Airport Express to network 3 iMacs to a DSL modem.  Recently, the network became undiscoverable to one of the iMacs.  Suggestions for a fix?

    I use Airport Express to network 3 iMacs to a DSL modem.  The network has become undiscoverable to one of the computers. I have reset the base station to factory settings but this does not help.  The other two computers are unaffected. All 3 computers can access the internet when connected directly to the modem.  I suspect the problem might be the Airport card?  Suggestions?
    beaucleo

    Thx for the suggestion, although I didn't have to reset the SMC to fix the problem. The problem was the handshake between the security password and the designated network.  The following links gave me info for investigationg the problem.
    http://support.apple.com/kb/HT4199
    http://www.ehow.com/how_6831952_test-airport-card.html
    http://www.youtube.com/watch?v=aXiZn64aZfg
    http://www.cnet.com/news/how-to-invoke-and-interpret-the-apple-hardware-tests/
    I would recommend these web sites to anyone who is having problems setting up and/or maintaining a wifi system.
    I discovered after reading one of the web references that if I disabled nework security the problem went away. This, however, was unacceptable.  Further experimentation showed that the solution to my problem was to change the name of my network while keeping the same password.  I tried only changing my password but that didn't help.  I still don't understand why only 1 of the 3 networked iMacs was affected.
    Again, thx for your interest and reply.
    beaucleo

  • HELP ibook g3 OSX 10.2.8 no longer detects airport express wireless network

    my ibook G3 OSX 10.2.8, airport admin utility software 3.1.1 no longer can detect the airport express wireless network (powerbook G4, OSX 10.4.11, airport admin utility 4.2; airport express, WEP protected, to DSL modem). i just installed an ipod driver update on the ibook, and wireless networking went down on restart. any help greatly appreciated!

    you name it : com.apple.airport.adminutility.plist
    delete it and do as advised.
    This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
    Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
    Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
    You cannot destroy something with these actions, because it is Unix maintance so usual routines.
    A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
    Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
    Best wishes from Germany

  • PCs suddenly no longer see Airport Express wireless network - please help!

    Hi,
    I am new to this forum and I need help. Two days ago - without me making any changes to settings etc. my Airport Express wireless network at home was no longer visible to any of my devices except to the Powerbook (G4 OS 10.3.9) which controls it. From one second to the next two Vista laptops and my cell phone (Nokia, Symbian OS).
    My Powerbook has no problem connecting through AE to the internet. The two laptops are both able to connect to other wireless networks so they don't seem to be the problem. I just don't understand what caused this sudden drop-off/invisibility.
    I have already tried the following: resetting the base station, changing the channel on the base station (from automatic) removing the network security altogether (from WPA2). But none of the devices except the powerbook can now see or detect my network.
    Please - if anyone knows what the cause of this problem could be or how to fix I would be very grateful!!

    you name it : com.apple.airport.adminutility.plist
    delete it and do as advised.
    This isn't harmful, because it is only a preference list, so it will be created brandnew as soon as you re-setup the Airport stuff.
    Mac OS X ( especially Jaguar ) has a tendency to corrupt some plists out of the blue, it is more or less harmless and can be fixed with recreating them plus permissions-repair.
    Hint : repair permissions more than one time, it ALWAYS finds something to fix in Jaguar.
    You cannot destroy something with these actions, because it is Unix maintance so usual routines.
    A tool like cocktail or Onyx ( google them, onyx is freeware ) can help you run such ( and more ) routines on a scheduled base.
    Always remember that OS X is no longer "the Mac OS", it is Unix with a nice Desktop, the critical things run hidden in the background, so it has to be treated like any Unix/Linux sort of OS, even if from the outside everything looks nice and kosher..
    Best wishes from Germany

  • Why have apple not launced new airport express 802.11ac version

    Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
    Do you think they will launch one soon as wanting to extend my WI-FI network but don't want to purchase current Airport Express 802.11n version if a new model is due to be on sale in the near future as would prefer latest models/technology.
    Please advise
    Regards
    Dave

    Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
    Do you think they will launch one soon ......
    Sorry, but no one here on a user-to-user support forum will be able to tell you what a notoriously secretive company like Apple will do or when they might do it. We are all users.....just like you.
    You would need to ask Apple about this, although I would be very surprised if you get an answer with any real information.
    http://www.apple.com/support/contact/

  • Linking Dell Laptop to existing/working Airport Express wireless network

    Hi,
    I'm trying to connect a Dell Laptop (Inspiron 2500) running on Windows XP to an existing and functionning Airport Express wireless network set up for my girlfriend's iBook. It works perfectly for the iBook.
    I have outfitted the Dell with a D-Link wireless G USB adapter and I see the network (i have the password) and it says I am connected to the network (even says connection is very good).
    However, when I open the internet browser, nothing.
    The network set up is: Cable to RCA Digital modem (model DCM425) to Airport Express (via ethernet) and to computer.
    I have tried playing around with the Dell Laptop settings (IP, DSN, etc ...) and I have called everyone involved (including Apple) to no avail.
    Any help would be greatly appreciated!
    Thanks,
    Nick
    Dell Laptop   Windows XP   iBook

    Thanks for the reply.
    WEP is enabled. As far as the encryption, I'm not sure. I believe that it's 64-bit, as the password for the network is a five-letter word.
    The funny thing, though, is that I had been using an IP address which I found on my girlfriend's Ibook, which allowed me to connect to her AEBS network, although the internet browser showed no connection.
    Following directions from somebody else, I removed the IP address to enable DHCP, and then I was able to connect to other networks in the area (and the browser also connected to the internet) but I couldn't get onto her network anymore. Even with the password ...
    Any ideas?
    If i'm supposed to upgrade to 128-bit, how should I go about doing that?
    Thanks again for the reply.
    What encryption are you using?
    Do you have WEP enabled?
    The problem you are having probably lies with the
    encryption key.
    ccessing a Airport Network with a Windows XP PC or
    laptop (with XP SP2)
    http://www.ifelix.co.uk/tech/1011.html
    Accessing a Airport Network with a Windows XP PC or
    laptop (with XP SP1)
    http://www.ifelix.co.uk/tech/1010.html
    iFelix

  • How can I stream audio from Apple TV 2 to Airport Express speakers.

    how can I stream audio from Apple TV 2 to Airport Express speakers.
    I have LCD projector on one wall and connected ATV to it via HDMI.
    Speakers on the other wall and connected to APXpress.

    To be honest the times we've wanted to have music from more than one set of speakers, I've usually used my mac's iTunes library and controlled it either from the mac or from my phone, since they're not really the times we have any TV on anyway. I've tested AirTunes from the Apple TV but can't recall whether it worked with content from a streaming library.
    Now I've got something to do.

  • I have an Apple TV and an Airport Express, can I use these to stream all audio from either my iPhone or my MacBook Pro, including Pandora?

    I have purchased an Apple TV and an Airport Express as a gift for a loved one and was under the impression that these two would not only allow for movies, videos etc would be streamed to the TV from my MacBook Pro, but also set up Airport Express with speakers and stream music from my laptop or iPhone.  Is there a way for all music, including Pandora, to be streamed through the Airport Express?  I can only figure out how it works with iTunes, not Pandora.
    Thanks for the help!!!

    You might want to take a look at Airfoil for Mac to be able to stream any audio source on your Mac.
    Rogue Amoeba | Airfoil for Mac: Wireless Audio Around Your House

  • I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    I recently bought an Airport Express and connected it to my TimeWarner modem. Am able to surf the internet using my MacBook Air, iPad, and Apple TV, but the AirPort Express has a blinking amber light. How could I change it to a green light?

    The following may help: Wi-Fi base station: Understanding and resolving a blinking amber status light

  • If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?

    If i have a home full of Apple TV's and Airport Express' can i  airplay music in every room at the same time?
    Or just one device(room) at a time?
    It seems there is a lot of home theater systems where they all hook up to one "control" and then disperse to the different locations per instructions..
    Is this possible with all apple products?

    From iTunes using Multiple Speakers (you can control with the Remote app on iPhone/iPad too), but not from AppleTV itself.

  • MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    MacBook Pro that  my Airport Express WiFi profile was created crashed. Can i reset the Airport Express either to an iPad or Windows 7 computer?

    Get the Airport Utility for the your iPad from the App store. You will need to know the password for the Airport Express (not the WiFi password) to access the AE. The iPad utility will, I think, do all of the actions to control your AE.
    You can reset the AE back to factory default but with the iPad app you should not ned to.

  • Iphone will not connect to airport express extended network - macbook and ipad will - Help

    Iphone will not connect to airport express extended network - macbook and ipad will without problems.
    iphone will connect to base station no problems, I've restored settings and started again but still the same, the iphone picked up the network for the last couple of months, but not now ?

    I'm having the same issue. My AExpress used to give a good signal strength on the far side of the house extending he network created by my Extreme. However, I've noticed lately that my iPhone does not receive the same strong signal it once did. AE has a green light, I've rebooted it, and my Extreme but there is no change in signal strength. Other than the green light, how can I tell if the Express is working if I don't get a good network signal?

  • Want stream Netflix to blueray via Airport Express wifi. The blueray finds my wifi but the wireless connection failed - said, Ensure DHCP server is enabled on router and restart router. Don't think I have DHCP server. Suggestions anyone?

    Want to stream Netflix to blueray player via my existing Airport Express wifi. The player finds my wifi but the wireless connection fails - says, " Ensure DHCP server is enabled on router and restart router." I don't think I have a DHCP server. Suggestions anyone?

    I can't speak specifically regarding LG, but the Whole Home feature on Direct TV (record a movie on one DVR and watch it on another TV in another location) just won't work with wireless, and I have a strong fast connection at 300 Mbps. Ethernet works perfectly.
    Few audio/video products will accept "n" wireless at 5 GHz. I suspect that your LG accepts a 2.4 GHz signal, which would top out at 130 Mpbs.
    If you are trying to stream High Definition video, especially at 1080P, my opinion would be that it is unlikely that you will be able to do so reliably using wireless.
    Perhaps another user who has figured out how to do this will post with some input.

Maybe you are looking for

  • COM Interface DLL Working in Windows XP Not working in Windows 7 virtuallly running WIN XP mode

    Hi,       I am Prasad, I want one clarification on Win7 64 bit inside we are running Windows XP in virtual mode. I am facing the problem in COM interface DLL which will do remote access to server & Core banking , Client & core banking. Now the client

  • Requirements reappear in Sourcing Cockpit after running BBP_GET_STATUS_2

    I have set up plan-driven procurement in the extended classic scenario in SRM 5.0 with an ECC 5.0 back-end. When I assign a vendor to a shopping cart in the sourcing cockpit for an external requirement, it disappears from the worklist. As soon as I h

  • System Copy - Server Names

    Hi, We are installing new servers. I am preparing to perform a system copy to the new servers. However, we have a few custom configurations for the transport system, some programs reference the server name, etc. Is it possible to simply install a ser

  • Motherboard voltage throttling?

    When I play a game, if my Alienware (late 2014) model with Nvidia 860M GPU is not plugged in, the monitor goes dim and the USB ports stop providing voltage to external devices, the system then recognizes this as an unplugged device... This is *NOT* a

  • People think they own my e-mail

    Hello, my e-mail is very very simple, it's camille[at]mac[dot]com Many people seem to think they have this e-mail as well and I get daily messages telling me how to reset my Apple password. That would be ok if after a couple time with the wrong e-mai